Novel B/Ge codoped photosensitive fibres and their dispersion compensation applications

A novel B/Ge codoped fibre was proposed, which also has photosensitive depressed inner cladding. The transmission spectrum of written grating in this fibre verified its strong photosensitivity and suppression of cladding mode coupling. After taking the diffraction into account, a more exact equation of the Bragg wavelength tuning theory of phase mask method was given. Then 8 cascaded fibre Bragg gratings centered at different wavelengths were successfully written with 248 nm KrF excimer laser and one piece of 1067 nm phase mask. By tilting the phase mask, chirp was also written in each grating. At last, it compensated the dispersion of 44 km single mode fibre in the 8 × 10 Gbit/s wavelength division multiplexing system successfully.     

Group velocity dispersion and polarization mode dispersion compensation by high-birefringence linearly chirped fiber Bragg grating

A high-birefringence linearly chirped fiber Bragg grating (FBG) is written into a polarization-maintaining photosensitive fiber by ultraviolet (UV) beam through a linearly chirped phase mask. Its performance as group velocity dispersion (GVD) and polarization mode dispersion (PMD) compensator is demonstrated in short pulse fiber optical transmission systems.     

40Gb/s光时分复用传输光纤光栅补偿色散研究

用精密扫描掩模法写入宽阻带啁啾光纤光栅,掩模板背面两端各10％长度处镀有按4阶高斯函数透过率的膜,写入的啁啾光栅的时延纹波最大值为20ps。为减少写入光纤光栅的偏振模色散,研制了新的低偏振模色散光纤光栅补偿写入法。采用补偿写入法前的平均微分群时延为9．1406 ps;采用补偿写入法后的平均微分群时延为0．1521 ps。并利用低偏振模色散光纤光栅对40Gb／s光时分复用系统在普通G．652光纤传输122km的色散进行了补偿实验,功率代价为1．5dB。     

非线性二次曝光法制作三角形光纤Bragg光栅

提出了一种利用非线性二次曝光技术制作三角形光纤Bragg光栅的新方法.该方法只使用普通Bragg位相模板,采用两次曝光技术,通过控制光纤光栅的本地谐振波长和反射率,达到控制光纤光栅谱形的目的.第一次直接对光纤曝光,用来控制光纤光栅谐振波长;第二次通过位相模板曝光,用来控制光纤光栅的反射率.考虑到光敏光纤感光特性曲线的多项e负指数变化规律,按照"分步写入光纤光栅设计软件"进行曝光分布设计,利用"分步曝光光纤光栅写入系统"进行曝光控制,使用信息产业部第46研究所生产的DCS-01型光敏光纤,得到了线性范围1.24 nm、反射率为0～64%的三角形光纤Bragg光栅.三角形光纤Bragg光栅作为光纤光栅传感解调器件,在光纤传感领域具有重要应用价值.     

13 cm长线性啁啾光纤光栅的研制

运用程控微位移扫描曝光技术结合相位掩模法,成功地研制了长为13cm,带宽为0．8nm,反射率为90％的宽带线性啁啾光纤光栅,经测试其色散值为－1700ps/nm。实验研究结果表明,对于10Gb/s的传输系统,所研制的光栅能很好地补偿100km普通单模光纤的色散。     

Study of the behaviour of the fibre Bragg grating fabricated with cladding mode suppression fibre

One effective method for suppression of coupling from guided optical modes into cladding modes in an optical fibre Bragg grating is to use cladding mode suppression fibre. In this specially engineered fibre, the grating is written into the core and the inner cladding, both of which are photosensitive. A theory is presented in this paper to analyse the spectral characteristics of this kind of gratings. A fibre Bragg grating was experimentally fabricated with this kind of photosensitive fibre (PS-RMS-50 from StockerYale). It is shown both theoretically and experimentally that such gratings exhibit strong suppression of the coupling between core mode and cladding mode. The experimental result is in good agreement with the theoretical analysis.     

+1/-1相位掩模板和532nm激光下低损耗As_2S_3硫系光纤布喇格光栅的制备

采用改进型Sagnac干涉光栅写入系统,利用532nm准带隙光曝光源和带+1/-1衍射级的相位掩模板,在两种不同直径的低损耗As_2S_3硫系玻璃光纤上刻写布喇格光栅,并研究曝光期间光栅的动态特性.实验表明,As_2S_3光纤布喇格光栅透射峰值随光纤直径的减小而增强;在曝光过程中,布喇格波长先是较快地向短波长方向移动,随着曝光时间的延长,布喇格波长缓慢地向长波长方向回复.曝光时间为800~1 000s时,在包层直径为140μm的As_2S_3光纤上获得质量良好的布喇格光栅光谱,其透射峰值可达-2.6dB,带宽为0.37nm.对As_2S_3硫系光纤纤芯的光敏性分析结果表明,折射率调制幅度和平均折射率变化随曝光时间分别可达到10-4和10-3数量级.     

中心波长1080 nm的高功率光纤光栅研制与测试

介绍了基于紫外光侧写和相位掩模法制作双包层光纤光栅的工艺,制作了一对中心波长1080 nm的光纤光栅,测试光谱得到其反射谱带宽分别为2 nm和1 nm。采用自制的光纤光栅搭建了一个高功率光纤振荡器,得到最高502 W的激光输出,并测试了输出激光的光谱和光束质量。     

Low birefringence depressed cladding photosensitive fiber

The highly Ge-doped photosensitive fiber （PSF） has been widely used in the fabrication of fiber Bragg gratings （FBGs）. Its birefringence and cladding mode coupling characteristics greatly influence FBG＇s transmission feature in communication application areas. In this work, a new concept of the PSF is introduced which, along with an optimized birefringence design, a precisely controlled fabrication process, and a cladding mode depressed design, results in a written FBG with -25-dB clad mode-depressed ratio and a polarization mode dispersion value less than 0.045 ps.     

闪耀光纤光栅写制技术及解调技术研究

利用相位掩模法,对闪耀光纤光栅的写制技术进行了研究.在载氢光敏光纤中写制了不同倾斜角度的闪耀光纤光栅,给出了相应的结果谱图.利用闪耀光纤光栅的包层耦合模,通过侧面光检测技术,实现了一种以闪耀光纤光栅为分光器件的光纤光栅波长解调系统.对C波段的波长进行了解调,给出了实验系统及相应结果分析.     

Bandwidth controllable transmission filter based on Moiré fiber Bragg grating

A new and efficient technique for fabrication of bandwidth controllable π–phase-shifted fiber Bragg grating (FBG) based on moiré grating using a uniform phase mask is demonstrated. The feasibility of writing a moiré grating into an ordinary SMF-28 fiber using stretching and double exposure by ultraviolet fringe is reported. We analyzed the relation between the initial differentia of phase of two exposures and the transmission spectrum of phase-shifted FBG. Moreover, we present a novel method to control the initial differentia of phase of two exposures. Using this technique, two kinds of resonant filters with a 3-dB line-width of 0.01 nm centered at 1553.79 nm and of 0.5 nm centered at 1554.57 nm respectively were fabricated with same uniform phase mask.     

Coupling between counterpropagating cladding modes in fiber Bragg gratings

We present an experimental demonstration of energy transfer between counterpropagating cladding modes in a fiber Bragg grating (FBG). A strong FBG written in a standard photosensitive optical fiber is illuminated with a single cladding mode, and the power transferred between the forward propagating cladding mode and different backward propagating cladding modes is measured by using two auxiliary long period gratings. Resonances between cladding modes having 30 pm bandwidth and 8 dB rejection have been observed.     

Phase-only sampled 45 channel fiber Bragg grating written with a diffraction-compensated phase mask

A novel phase-only sampled 45 channel fiber Bragg grating (channel spacing, 100 GHz) with high interchannel and intrachannel reflection uniformity and precise dispersion matching capability to an 80 km SMF-28 fiber is demonstrated. This grating is fabricated by the side-writing technique, in which phase information of continuous phase-only sampling is completely incorporated into a diffraction-compensated phase mask.     

Bandwidth controllable transmission filter based on Moiré fiber Bragg grating

A new and efficient technique for fabrication of bandwidth controllable π–phase-shifted fiber Bragg grating (FBG) based on moiré grating using a uniform phase mask is demonstrated. The feasibility of writing a moiré grating into an ordinary SMF-28 fiber using stretching and double exposure by ultraviolet fringe is reported. We analyzed the relation between the initial differentia of phase of two exposures and the transmission spectrum of phase-shifted FBG. Moreover, we present a novel method to control the initial differentia of phase of two exposures. Using this technique, two kinds of resonant filters with a 3-dB line-width of 0.01 nm centered at 1553.79 nm and of 0.5 nm centered at 1554.57 nm respectively were fabricated with same uniform phase mask.     

Wideband multichannel dispersion compensation based on a strongly chirped sampled Bragg grating and phase shifts

A novel multichannel dispersion compensator based on a strongly chirped sampled Bragg grating with phase shifts is demonstrated experimentally. With a single phase mask, various channel spacings and dispersion can be achieved by proper control of the sampling period and the phase shifts. A 100 GHz channel-spacing compensator with a dispersion of -1000 ps/nm and another 200 GHz channel-spacing compensator with a dispersion of -500 ps/nm are designed. As an example, a 40 channel, 100 GHz channel-spacing compensator with a dispersion of approximately -560 ps/nm is fabricated. All the designs are based on one phase mask, thus showing the flexibility of our method.     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法，在D形内包层掺Yb3+双包层光纤一端直接写制出Bragg光栅，用作双包层光纤激光器的输出腔镜.试验得到了线宽为0.196nm，波长为1058.2nm，最高输出功率为570mW的稳定激光输出，解决了激光器中模式竞争造成的输出不稳定现象.从速率方程出发，对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析，结果与实验符合很好. 关键词： 双包层光纤光栅 掺Yb3＋双包层光纤激光器 相位掩模 速率方程     

波长无啁啾调谐窄线宽掺Yb3+双包层光纤激光器

用相位掩模法, 在圆形掺Yb3+双包层光纤上制作了Bragg光纤光栅,并用它作为双包层光纤激光器的输出腔镜, 在光栅反射中心波长1055.2 nm位置得到了窄线宽的激光输出, FWHM为0.271 nm, 信噪比约为40 dB.这种结构的双包层光纤激光器, 在双包层增益光纤和后腔镜间没有连接损耗, 减小了双包层光纤激光器体积. 用自行制作的等强度梁对作为输出腔镜的光纤光栅做双向应力调谐, 实现了激光波长无啁啾调谐输出, 调谐范围1051.1~1060.04nm,调谐量达8.9nm, 调谐过程中激光3 dB线宽基本无变化.     

Bragg gratings photoinduced in ZBLAN fibers by femtosecond pulses at 800 nm

Fiber Bragg gratings were written in thulium-doped and undoped single-mode ZBLAN fibers by focusing femtosecond laser pulses on the fiber core through a phase mask. Maximum index modulation of the order of 1 x 10(-3) was induced in both types of fibers. Measurements of the transverse refractive index changes across the core and cladding regions indicate that the grating formation originates from a negative index change.     

New nanosecond Q-switched Nd:VO4 laser fifth harmonic for fast hydrogen-free fiber Bragg gratings fabrication

We demonstrate the fabrication of fiber Bragg gratings using a novel high-repetition rate nanosecond Q-switched Nd:VO₄ laser fifth harmonic (213 nm) source for the first time in boron and hydrogen-free, Ge doped fiber. Strong gratings are rapidly obtained with the phase mask technique in hydrogen-free B/Ge doped photosensitive fiber with relatively low average power (100 mW), as well as in standard Corning SMF28 fiber. The evolution of the refractive index change during UV-exposure is presented. Photosensitivity of fibers to the 213 nm light is compared to the fourth harmonic (266 nm) light, as well as picosecond 213 nm radiation and is shown to be significantly higher than both. We believe that the photosensitivity of SMF28 fiber is due to a single-photon rather than two-photon absorption process.     

A novel way to write fiber Bragg gratings with controllable wavelength and chirp using a phase mask

A novel method for writing long fiber Bragg grating (FBG) with arbitrary multi-wavelength and chirp at the same place of a fiber by using a phase mask is presented. An experimental equation is derived for Bragg wavelength, and the Bragg wavelength is found to be a function of the distance between the fiber and the phase mask. The chirp of the overlapped FBG is decided by the angle between phase mask and fiber. A multi-wavelength FBG with 4, 8, 16 channels has been written by using a unique phase mask.