共查询到17条相似文献,搜索用时 343 毫秒
1.
光敏感双亲性梳状SMA聚合物的合成及其胶束化 总被引:1,自引:0,他引:1
以含香豆素型苯乙烯类光敏单体(coumarin-containing styrene monomer, CS)与苯乙烯(St)、马来酸酐(MA)为反应单体, 以偶氮二异丁腈(AIBN)为引发剂制备了光敏感三元苯乙烯-马来酸酐共聚物(SMA)双亲交替聚合物P(St/CS-alt-MA), 再利用羧酸酐基元与正辛胺的室温胺解反应获得光敏感双亲性梳状聚合物P(St/CS-alt-MAA8). 用傅立叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)、1H核磁共振(1H-NMR)等对该双亲梳状聚合物进行结构表征. 通过香豆素基元的光二聚作用, 使梳状聚合物溶解在DMSO中进行光照预交联; 非交联与预交联聚合物分别在选择性溶剂中自组装形成胶束; 利用羧酸基元与NaOH的离子化作用改变聚合物胶束的亲疏水性质. 动态激光光散射(DLS)与芘荧光探针实验表明预交联聚合物胶束较非交联胶束粒径大, 负载芘的能力强; 离子化作用使聚合物胶束解离重组成粒径更小的胶束, 但预交联胶束较非交联胶束小, 离子化后胶束疏水微区更加紧密, 负载芘的能力也增大. 相似文献
2.
以壳寡糖/Pluronic(R)聚合物纳米聚集体(COPNs)、肝素为组装基元构建仿(肝素/壳聚糖)多层膜,验证多层膜负载疏水药物的可行性.Pluronic(R)P123与1,3-丙烷磺内酯反应合成末端磺酸化的Pluronic(R)聚合物,其与Pluronic(R)F127在水溶液中自组装形成表面带负电荷的混合胶束.利用壳寡糖与混合胶束的静电作用,获得COPNs,粒径与表面电位分析、透射电镜表征COPNs为直径(27.61±2.46) nm、表面zeta电位(6.12±1.82)mV、稳定的球形结构.石英晶体微天平(QCM)跟踪检测证明COPNs与肝素可在基材表面实现交替沉积;原子力显微镜(AFM)表征多层膜表面拓扑形貌,证明COPNs在表面沉积过程中稳定.将疏水的荧光探针芘载入COPNs参与多层膜的构建,荧光光谱实验结果表明多层膜可成功包载芘,且多层膜内芘的载入量与组装层数相关.以葛根素为模型药物,载药量测定与体外释药实验结果表明多层膜具有包载和缓释疏水药物的能力. 相似文献
3.
基于聚合物复合物和层层组装技术实现了大分子药物硫酸软骨素和小分子药物头孢曲松钠在聚合物膜中的高效负载以及差别性释放. 壳聚糖(CHI)和大分子药物硫酸软骨素(CSS)通过静电相互作用力复合, 制备了壳聚糖-硫酸软骨素复合物(CHI-CSS). 以CHI-CSS复合物和透明质酸(HA)为构筑基元, 通过层层组装构筑负载有硫酸软骨素的聚合物复合物膜. 利用后扩散的负载方法将小分子药物头孢曲松钠(CTX)负载到聚合物膜中, 从而实现大分子和小分子2种药物在聚合物膜中的负载. 聚合物膜中负载的CTX和CSS在生理条件下具有快慢不同的差别性释放动力学特性, CTX在6 h内快速释放, 而CSS长效缓释长达14 d. 快速释放的抗生素CTX能够有效抑制细菌感染, 而酶降解作用下缓慢释放的CSS可促进伤口愈合, 在包括头颈外科在内的外科术后感染防治领域有良好应用前景. 相似文献
4.
采用芘荧光法研究了海藻酸钠(NaAlg)与十二烷基硫酸钠(SDS)在不同pH水溶液中的相互作用.以芘单体的荧光光谱第一峰与第三峰的荧光强度之比(I1/I3)及激基缔合物与单体荧光强度之比(IE/IM)来探测芘分子所处环境的极性.结果表明:NaAlg水溶液随pH值降低,出现了聚合物的疏水微区;pH从7降到5,NaAlg类似简单盐,对SDS的临界胶束浓度(CMC)有明显的影响;在pH 3时,海藻酸主链上有足够的疏水片段,使得SDS与海藻酸通过疏水性作用而聚集.NaCl对NaAlg /SDS体系的影响亦较明显. 相似文献
5.
采用芘荧光法研究了聚氧化乙烯(PEO)与十二烷基硫酸钠(SDS)在不同质量浓度的水溶液中的相互作用。以芘单体的荧光光谱第一峰与第三峰的荧光强度之比(I_1/I_3)及激基缔合物与单体荧光强度之比(I_E/I_M)来探测芘分子所处环境的极性。结果表明:Py-PEO-SDS水溶液在极小质量浓度下基本不形成疏水微区,当质量浓度超过一定值时开始大量形成疏水微区,I_1/I_3值迅速下降。在溶液浓度为6g·L~(-1)时,SDS分子开始与聚合物分子相互作用,芘探针分子开始与形成的预胶束发生吸附作用,同时开始形成高荧光电子产率的激基缔合物;在溶液浓度为20g·L~(-1)时,随着SDS溶液浓度的增加,芘探针分子全部进入胶束中,形成的激基缔合物急速增加并且在I_E/I_M最高值点达到最大量。 相似文献
6.
塑料表面载银微凝胶层层组装膜的制备及抗菌活性 总被引:1,自引:0,他引:1
以载银聚烯丙基胺盐酸盐-葡聚糖微凝胶与聚苯乙烯磺酸钠为构筑基元,利用层层组装技术制备了一种可直接沉积在疏水的塑料基底表面的载银抗菌微凝胶膜. 研究结果表明,该载银抗菌微凝胶膜具有很好的抗菌能力,并且其抗菌活性可以通过控制载银微凝胶膜的组装层数方便地进行调控. 这种制备在塑料表面的载银抗菌微凝胶膜具有良好的稳定性和基底粘附力,能够保障其长效抗菌的实现. 相似文献
7.
以丙烯酸(AA)、甲基丙烯酸十八酯(OMA)、十二烷基硫酸钠(SDS)为原料,采用胶束共聚的方法合成了疏水缔合(HA)凝胶.在HA凝胶内部,表面活性剂SDS与疏水单体OMA组成的增溶胶束起到物理交联作用,将亲水的聚合物链交联起来.通过单向拉伸试验证实了该凝胶具有较高的机械性能.此外,也测试了HA凝胶在不同pH值溶液中的溶胀行为.结果显示,HA凝胶具有特殊的溶胀行为,其溶胀过程可以分为凝胶溶蚀、溶胀平衡和凝胶瓦解3个阶段.在强酸性条件下,凝胶的溶胀被抑制,没有出现凝胶瓦解阶段.在强碱性条件下,凝胶的溶胀被促进,溶胀平衡阶段被越过.盐的存在也会抑制HA凝胶的溶胀,但在SDS溶液中,溶液中的SDS会促使凝胶中的疏水改性聚合物溶解到溶液中去,组成新的缔合结构,而使溶液增稠。 相似文献
8.
9.
10.
合成了聚乙烯亚胺接枝二茂铁(PEI-Fc)两亲聚合物, 采用水包油法制备包埋疏水性抗癌药阿霉素(DOX)的载药胶束, 并利用胶束表面正电荷的PEI链段有效缔合DNA, 获得尺寸合适、 表面带正电荷的阿霉素与基因共负载微载体. 在磷酸盐(PBS)缓冲溶液中, 共负载微载体能够缓慢释放出DOX. 在硝酸铈铵存在下, 二茂铁从疏水性转变为亲水性, 使载药胶束完全解离, 由于PEI-Fc与DNA之间的静电作用, 使基因超分子组装体稳定存在, 显示出很好的氧化响应特性. 细胞培养结果表明, 表面带正电荷的共负载微载体易被HepG2细胞内吞, 并可转染, 且随着DOX的释放逐渐杀死HepG2肝癌细胞, 为安全稳定、 具有刺激响应的药物与基因共负载微载体的制备提供了可行的途径. 相似文献
11.
Wang L Wang X Xu M Chen D Sun J 《Langmuir : the ACS journal of surfaces and colloids》2008,24(5):1902-1909
Multilayer films containing microgels of chemically cross-linked poly(allylamine hydrochloride) (PAH) and dextran (named PAH-D) were fabricated by layer-by-layer deposition of PAH-D and poly(styrene sulfonate) (PSS). The successful fabrication of PAH-D/PSS multilayer films was verified by quartz crystal microbalance measurements and cross-sectional scanning electron microscopy. The as-prepared PAH-D/PSS multilayer films can reversibly load and release negatively charged dyes such as methyl orange (MO) and fluorescein sodium and mercaptoacetic acid-stabilized CdTe nanoparticles. The loading capacity of the film for MO can be as large as approximately 3.0 microg/cm2 per bilayer, which corresponds to a MO density of 0.75 g/cm3 in the film. The high loading capacity of the PAH-D/PSS films originates from the cross-linked film structure with sufficient binding groups of protonated amine groups, as well as their high swelling capability by solvent. The loaded material can be released slowly when immersing the films in 0.9% normal saline. Meanwhile, the PAH-D/PSS multilayer films could deposit directly on either hydrophilic or hydrophobic substrates such as quartz, polytetrafluoroethylene, polystyrene, poly(ethylene terephthalate), and polypropylene. The microgel films of PAH-D/PSS are expected to be widely useful as matrixes for loading functional guest materials and even for controlled release. 相似文献
12.
Liu X Zhou L Geng W Sun J 《Langmuir : the ACS journal of surfaces and colloids》2008,24(22):12986-12989
Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers. 相似文献
13.
Matthew G. Kellum Christopher A. Harris Charles L. Mccormick Sarah E. Morgan 《Journal of polymer science. Part A, Polymer chemistry》2011,49(5):1104-1111
Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
14.
Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers
A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films. 相似文献
15.
Garcia A Marquez M Cai T Rosario R Hu Z Gust D Hayes M Vail SA Park CD 《Langmuir : the ACS journal of surfaces and colloids》2007,23(1):224-229
Microgels with photo-, thermally, and pH-responsive properties in aqueous suspension have been synthesized and characterized using dynamic light scattering and UV-visible spectroscopy. The new route involved first preparing poly(N-isopropylacrylamide) (PNIPAM)-allylamine copolymer microgels and a spiropyran photochrome (SP) bearing a carboxylic acid group. Then the functionalized spiropyran was coupled to the microgel via an amide bond. The dark-equilibrated gel particles feature spiropyran molecules in the polar, merocyanine form. After irradiation of visible light, the particle size becomes smaller because spiropyran changes to the relatively nonpolar, closed spiro form. The PNIPAM-SP microgels undergo a volume phase transition in water from a swollen state to a collapsed state with increasing temperature under all light conditions. However, the transition temperature range of the PNIPAM-SP is much broader than that for the PNIPAM without SP. The PNIPAM-SP microgels are monodisperse and self-assemble into a crystalline lattice while in suspension. The UV-visible spectra of an aqueous suspension of PNIPAM-SP microgel in the dark-adapted, merocyanine form showed both an absorption peak around 512 nm due to the merocyanine (giving a reddish color to the suspension) and two sharp peaks from Bragg diffraction of colloidal crystallites. Upon visible irradiation, the 512-nm band bleached significantly due to spiropyran photoisomerization. The spiropyran photoisomerization and accompanying color changes of the suspension were reversible upon alternating dark, UV, and visible light irradiation. Due to the residues of amine groups, the swelling capability of PNIPAM-SP microgels reduces as the pH value is changed from 7 to 10. 相似文献
16.
The release of two compositionally different solutes from a composite gel composed of two different populations of microgel particles embedded in a single bulk gel matrix is described, showing the potential of the "plum-pudding gel" as a multifunctional platform for controlled surface release. One hydrophobic solute (pyrene) and one hydrophobic and charged solute (rhodamine 123) were chosen as the solutes to be released. Hydrophobic microgels composed of 50% N-isopropylacrylamide (NIPAM) and 50% N-tert-butylacrylamide (BAM) were loaded with pyrene, and anionic microgels composed of 30% acrylic acid (AAc), 20% NIPAM, and 50% BAM were loaded with rhodamine 123. The two solute-loaded microgel populations were incorporated into a single bulk gel network, from which the two solutes were released simultaneously and independently. Using this structural motif, solutes that are mutually incompatible can be incorporated into a single matrix with which they may also be incompatible. The electrostatically incorporated solute was released much more slowly than the hydrophobically attracted solute, indicating that the microgel composition can be tailored to the specific solute, and thus control its release rate. The choice of bulk matrix was also found to influence the release rate much more than expected, offering a further control element to the system. 相似文献
17.
Aqueous microgels for the growth of hydroxyapatite nanocrystals 总被引:1,自引:0,他引:1
Schachschal S Pich A Adler HJ 《Langmuir : the ACS journal of surfaces and colloids》2008,24(9):5129-5134
In present article, we demonstrate that aqueous microgels can be used as containers for the in-situ synthesis of hydroxyapatite. The hydroxyapatite nanocrystals (HAp NCs) become integrated into microgels forming hybrid colloids. The HAp NCs loaded in the microgel can be varied over a broad range. The HAp NCs are localized within the microgel corona. The deposition of the inorganic nanocrystals decreases the colloidal stability of the microgels and leads to particle aggregation at high HAp NCs loading. Because of the strong interactions between HAp NCs and polymer chains, the swelling degree of microgels decreases, and temperature-sensitive properties disappear at high loading of the inorganic component. We demonstrate that hybrid colloids can be used as building blocks for the preparation of nanostructured films on solid substrates. 相似文献