A novel resorufin based fluorescent “turn-on” probe for the selective detection of hydrazine and application in living cells

In this study, a resorufin derivative RTP-1, which is a novel fluorescent ‘‘turn-on' probe for sensitive detection of hydrazine within 30 min, is designed and synthesized. The selective deprotection of the ester group of the probe by hydrazine led to a prominent enhancement of fluorescent intensity, as well as a remarkable color change from colorless to pink, which could be distinguished by naked eye. The fluorescence enhancement showed decent linear relationship with hydrazine concentration ranging from 0 to 50 mmol/L, with a detection limit of 0.84 mmol/L. The specificity of RTP-1 for hydrazine to a number of metal ions, anions and amines is satisfactory. The sensing mechanism of RTP-1 and hydrazine was evaluated by HPLC, ESI mass spectrometry and density functional theory(DFT).Moreover, we have utilized this fluorescent probe for imaging hydrazine in living cells, and the fluorescence was clearly observed when the cells were incubated with hydrazine(100 mmol/L) for 30 min.     

A new BODIPY-based fluorescent “turn-on” probe for highly selective and rapid detection of mercury ions

A new fluorescent sensor based on the BODIPY fluorophore and the carboxyl-thiol metal bonding receptor for Hg²⁺ was designed and synthesized. The sensor is highly selective for Hg²⁺ (about 630-fold fluorescence enhancement) over relevant competing metal ions, sensitive to ppb levels of Hg²⁺ (with detection limit of 5.7?nM), and fast response toward Hg²⁺ (within 30?s) in aqueous solution.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

A highly selective HBT-based “turn-on” fluorescent probe for hydrazine detection and its application

As one of the important industrial chemicals, hydrazine (N₂H₄) can be inhaled through the skin, leading to many serious health issues. In this paper, we constructed a novel turn-on fluorescent probe HBTM for N₂H₄ detection based on ESIPT and ICT mechanism by incorporating the methyl dicyanvinyl group to 2-(2′-hydroxylphenyl) benzothiazole (HBT) fluorophore. The probe showed the following advantages: high sensitivity with detection limit of 2.9 × 10^?7 M, high selectivity over other related interfering species, wide linear range of 0–140 μM and pH value adaptation. Moreover, the probe could detect N₂H₄ on paper strips and image N₂H₄ in living cells.     

A reversible fluorescent INHIBIT logic gate for determination of silver and iodide based on the use of graphene oxide and a silver–selective probe DNA

We describe a reversible fluorescent DNA–based INHIBIT logic gate for the determination of silver(I) and iodide ions using graphene oxide (GO) as a signal transducer and Ag(I) and iodide as mechanical activators. The basic performance, optimized conditions, sensitivity and selectivity of the logic gate were investigated and revealed that the method is highly sensitive and selective over potentially interfering ions. The limits of detection for Ag(I) and iodide are 10 nM and 50 nM, respectively. This logic gate was successfully applied to the determination of Ag(I) and iodide in (spiked) tap water and river water. It was also used for the determination of iodide in human urine samples with satisfactory results. Compared to other methods, this INHIBIT logic gate is simple in design and has small background interference.

A simple and reversible fluorescent DNA-based INHIBIT logic gate is designed by using graphene oxide as a signal transducer and silver ions and iodide as mechanical activators.

     

Ultrasensitive detection of aliphatic nitro-organics based on “turn-on” fluorescent sensor array

The broad class of explosives includes nitro aromatics as well as challenging aliphatic nitro-organics whose detection is important from counter-terrorism and national security perspectives. Here we report a turn-on fluorescent sensor array based on aggregation-induced emission (AIE) fluorophores as receptors. To achieve a good sensing system with fast response, good sensitivity and low detection limit, three receptors with abundant chemical diversities for target analytes were synthesized. The turn-on response of the individual receptor showed highly variable and cross-reactive analyte-dependent changes in fluorescence. The excellent ability to identify a variety of explosives, especially the challenging aliphatic nitro-organics (2,3-dimethyl-2,3-dinitrobutane (DMNB), 1,3,5-trinitro-1,3,5-triazinane (RDX), cyclotetramethylene tetranitramine (HMX) and entaerythritol tetranitrate (PETN)), was demonstrated in qualitative and quantitative analyses with 100% accuracy. The fluorescence signal amplification in the presence of explosives allows for application of these receptors in a sensor microarray suitable for high-throughput screening. These results suggested that the cross-reactive sensor array based on AIE fluorophores could find a wide range of applications for sensing various analytes or complex mixtures.     

A highly selective and easy-to-synthesize Zn(Ⅱ) fluorescent probe based on 6-methoxyquinolin

A novel fluorescent Zn²⁺ probe based on 6-methoxyquinolin was synthesized in four steps from inexpensive starting materials.It exhibits very strong fluorescence responses and has a remarkably high selectivity to Zn²⁺ than other physiological relevant metal ions.This new compound could be used as low-priced yet high-quality Zn²⁺ probe.     

An oxidative cyclization reaction based fluorescent “Turn-On” probe for highly selective and rapid detection of hypochlorous acid

A novel fluorescent turn-on probe, PHC1, for the detection of hypochlorous acid has been developed based on hypochlorous acid-initiated oxidative intramolecular cyclization. Endowed by the fast reaction rate, PHC1 features rapid detection kinetics, as well as high degree of selectivity and sensitivity for HClO.     

A new selective ‘turn-on’ small fluorescent cationic probe for recognition of RNA in cells

Fluorescent imaging probes have revolutionised cell biology by monitoring cellular objects. However, the lack of fluorescent probes with high selectivity for RNA has been a drawback. Thus, selective RNA binding for fluorescent sensors is essential. Here, we report the selective fluorescence enhancement upon addition of RNA. By exploiting a selective recognition of small tetra-cationic probe 1 for RNA, we also explain the possible binding mode for RNA. As a membrane-permeant fluorescence probe, 1 provides selective imaging of RNA not only in human neuroblastoma tumour SH-SY5Y cell line used for Parkinson's disease but also in the unicellular green alga cells. Further exploitation could open new opportunities in neurotoxin and cancer biology.     

A one-step selective fluorescence turn-on detection of cysteine and homocysteine based on a facile CdTe/CdS quantum dots–phenanthroline system

In this paper, we report a simple, selective, sensitive and low-cost turn-on photoluminescent sensor for cysteine and homocysteine based on the fluorescence recovery of the CdTe/CdS quantum dots (QDs)–phenanthroline (Phen) system. In the presence of Phen, the fluorescence of QDs could be quenched effectively due to the formation of the non-fluorescent complexes between water-soluble thioglycolic acid (TGA)-capped QDs and Phen. Subsequently, upon addition of cysteine and homocysteine, the strong affinity of cysteine and homocysteine to QDs enables Phen to be dissociated from the surface of QDs and to form stable and luminescent complexes with cysteine and homocysteine in solution. Thus, the fluorescence of CdTe/CdS QDs was recovered gradually. A good linear relationship was obtained from 1.0 to 70.0 μM for cysteine and from 1.0 to 90.0 μM for homocysteine, respectively. The detection limits of cysteine and homocysteine were 0.78 and 0.67 μM, respectively. In addition, the method exhibited a high selectivity for cysteine and homocysteine over the other substances, such as amino acids, thiols, proteins, carbohydrates, etc. More importantly, the sensing system can not only achieve quantitative detection of cysteine and homocysteine but also could be applied in semiquantitative cysteine and homocysteine determination by digital visualization. Therefore, as a proof-of-concept, the proposed method has potential application for the selective detection of cysteine and homocysteine in biological fluids.     

A novel “turn-on” dipyrrin-type fluorescent detector of Zn2+ based on tetraphenylethene

A tetraphenylethene-containing dipyrrin (TPEpy) has been synthesized and its photophysical properties and metal detecting properties have been investigated. TPEpy displays a high selectivity and sensitivity with a detection limit of 8.96 × 10^?8 M for Zn²⁺ in aqueous media.     

A novel colorimetric and “turn-on” fluorescent sensor for selective detection of Cu2+

In this work, a new highly selective and sensitive fluorescent sensor for detecting Cu²⁺ was developed based on rhodamine fluorophore. It displayed strong fluorescence “turn-on” effect upon addition of Cu²⁺, and possessed the function of naked eye recognition. The fluorescence enhancement also enabled the sensor to quantitatively analyze Cu²⁺ due to the formation of a stable 1:1 metal–ligand complex in a short time, and the complex possesses relatively good pH stability. In addition, the density functional theory calculations were adopted to investigate the molecular orbitals as well as the spatial structure. Simultaneously, the cell imaging and zebra fish experiments provided a broader application prospect in biological system.     

A turn-on fluorescence-sensing technique for glucose determination based on graphene oxide–DNA interaction

Graphene is a two-dimensional carbon nanomaterial one atom thick. Interactions between graphene oxide (GO) and ssDNA containing different numbers of bases have been proved to be remarkably different. In this paper we propose a novel approach for turn-on fluorescence sensing determination of glucose. Hydrogen peroxide (H₂O₂) is produced by glucose oxidase-catalysed oxidation of glucose. In the presence of ferrous iron (Fe²⁺) the hydroxyl radical (?OH) is generated from H₂O₂ by the Fenton reaction. This attacks FAM-labelled long ssDNA causing irreversible cleavage, as a result of the oxidative effect of ?OH, producing an FAM-linked DNA fragment. Because of the weak interaction between GO and short FAM-linked DNA fragments, restoration of DNA fluorescence can be achieved by addition of glucose. Due to the excellent fluorescence quenching efficiency of GO and the specific catalysis of glucose oxidase, the sensitivity and selectivity of this method for GO-DNA sensing are extremely high. The linear range is from 0.5 to 10 μmol L^?1 and the detection limit for glucose is 0.1 μmol L^?1. The method has been successfully used for analysis of glucose in human serum. Figure

?     

A highly sensitive ＂turn-on＂ fluorescent probe for bovine serum albumin protein detection and quantification based on AIE-active distyrylanthracene derivative

A sulfonated 9,10-distyrylanthracene derivative with aggregation-induced emission （AIE） property is designed and synthesized. It shows a highly sensitive and selective fluorescence enhancement property for bovine serum albumin （BSA） protein detection and quantification. Analysis on the interaction between the probe molecule and BSA reveals the essential role of the hydrophobic cavities of the protein folding structure.     

A highly selective turn-on colorimetric and luminescence sensor based on a triphenylamine-appended ruthenium(Ⅱ) dye for detecting mercury ion

A dual colorimetric and luminescent sensor based on a heteroleptic ruthenium dye[Ru(Hipdpa)(Hdcbpy)(NCS)_2]~-·0.5H~+ 0.5[N(C_4H_9)_4]~+ Ru(Hipdpa) {where Hdcbpy = monodeprotonted-4,4'-dicarboxy-2.2'-bipyridineand Hipdpa = 4-(1H-imidazo[4,5-f][l,10]phenanthroIin-2-yl)-N,N-diphenylaniIine} for selective detection of Hg~(2+) is presented.The results of spectrophotometric titrations revealed an evident luminescence intensity enhancement(I/I_0 =11) and a considerable blue shift in visible absorption and luminescence maxima with the addition of Hg~(2+).The sensitive response of the optical sensor on Hg~(2+) was attributed to the binding of the electron-deficient Hg~(2+) to the electron-rich sulfur atom of the thiocyanate(NCS) ligand in the Ru(Hipdpa).which led to an increase in the energy gap between the highest occupied molecular orbital(HOMO) and the lowest unoccupied molecular orbital(LUMO).Accordingly,the blue shift in the absorption spectrum of Ru(Hipdpa) due to the binding of Hg~(2+) was obtained.Ru(Hipdpa) was found to have decreased Hg~(2+) detection limit and improved linear region as compared to di(tetrabutylammonium) ris-bis(isothiocyanato)bis(2,2'-bipyridine-4-carboxylic acid-4'-carboxylate)ruthenium(Ⅱ) N719.Moreover,a dramatic color change from pink to yellow was observed,which allowed simple monitoring of Hg~(2+) by either naked eyes or a simple colorimetric reader.Therefore,the proposed sensor can provide potential applications for Hg~(2+) detection.     

A selective coumarin-based “turn-on” fluorescent sensor for the detection of cysteine and its applications for bioimaging

A coumarin-based compound (1) was designed and synthesized as a new turn-on fluorescent probe for the detection of cysteine. The in vivo imaging of Hi5 cell and Caenorhabditis elegans had further confirmed the cysteine detection by compound 1.     

Preparation and recognition performance of ratio-fluorescent probe based on sulfadiazine imprinted polymersEI北大核心CSCD

A novel ratio-fluorescent probe based on molecular imprinting polymer ( MIP) for the detection of sulfadiazine was prepared by using nitrogen-doped carbon quantum dots (N-CQDs) as the fluorescence response signal, silica-embedded cadmium telluride quantum dots ( CdTe QDs) as the fluorescence reference signal, sulfadiazine ( SDZ) as template molecule, acrylamide as functional monomer, N, N-methyl bisacrylamide as crosslinking agent and 2,2-Azobisisobutyronitrile as initiator. The results showed that the probe has a core-shell structure and fluorescence sensitive to SDZ, by the characterization of scanning electron microscopy, transmission electron microscopy, and fluorescence spectrophotometer. Under the wavelength of 360 nm, the ratio-fluorescent signal of probe showed a linear response with SDZ concentration in the range of 0-100 μmol / L with the detection limit of 11 nmol / L. Also, the ratio-fluorescent probe was applied to the detection of SDZ with a recovery of 92. 0%-95. 1% and relative standard deviation (RSD) of 3. 6% in real water samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.