Low-temperature heat capacities and standard molar enthalpy of formation of the complex

Low-temperature heat capacities of a solid complex Zn(Val)SO₄·H₂O(s) were measured by a precision automated adiabatic calorimeter over the temperature range between 78 and 373 K. The initial dehydration temperature of the coordination compound was determined to be, T _D=327.05 K, by analysis of the heat-capacity curve. The experimental values of molar heat capacities were fitted to a polynomial equation of heat capacities (C _p,m) with the reduced temperatures (x), [x=f (T)], by least square method. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the complex relative to the standard reference temperature 298.15 K were given with the interval of 5 K. Enthalpies of dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] (Δ_sol H _m,l ⁰) and the Zn(Val)SO₄·H₂O(s) (Δ_sol H _m,2 ⁰) in 100.00 mL of 2 mol dm^–3 HCl(aq) at T=298.15 K were determined to be, Δ_sol H _m,l ⁰=(94.588±0.025) kJ mol^–1 and Δ_sol H _m,2 ⁰=–(46.118±0.055) kJ mol^–1, by means of a homemade isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as: Δ_f H _m ⁰ (Zn(Val)SO₄·H₂O(s), 298.15 K)=–(1850.97±1.92) kJ mol^–1, from the enthalpies of dissolution and other auxiliary thermodynamic data through a Hess thermochemical cycle. Furthermore, the reliability of the Hess thermochemical cycle was verified by comparing UV/Vis spectra and the refractive indexes of solution A (from dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] mixture in 2 mol dm^–3 hydrochloric acid) and solution A’ (from dissolution of the complex Zn(Val)SO₄·H₂O(s) in 2 mol dm^–3 hydrochloric acid).     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of specific heat capacity and standard molar combustion enthalpy of taurine by DSC

Using XRY-1C calorimeter, the standard molar enthalpy of taurine was determined to be ?2546.2?kJ?mol^?1 . The reliability of the instrument used was tested by using naphthalene as reference material; and through comparing the molar combustion enthalpy of naphthalene measured with its standard value found in literature, the absolute error and relative error were found to be 4.53?kJ?mol^?1 and 0.09%, respectively. The melting point and melting enthalpy of taurine were determined by Differential Scanning Calorimetry (DSC), which was found to be 588.45?K and ?22.197?kJ?mol^?1, respectively. Moreover, using the DSC method, the specific heat capacities C _p of taurine was measured and the relationship between C _p and temperature was established. The thermodynamic basic data obtained are available for the exploiting new synthesis method, engineering design and industry production of taurine.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

嘧霉胺的标准生成焓及其抗灰葡萄孢菌作用

用苯胺、氨基氰、乙酰丙酮三种物质合成了杀菌剂嘧霉胺(C12N3H13).并用溶解量热法在常压、298.15K下,分别测定了苯胺、氨基氰、乙酰丙酮和嘧霉胺在混合溶剂(VDMF:VDMSO=2:1)中的溶解焓:ΔsHmΘ(C6NH7(l),298.15K)=-(12.48±0.16)kJmol-1、ΔsHmΘ(NH2CN(s),298.15K)=-(8.06±0.42)kJmol-1、ΔsHmΘ(CH3COCH2COCH3(l),298.15K)=(1.26±0.03)kJmol-1和ΔsHmΘ[C12N3H13(s),298.15K]=(13.84±0.12)kJmol-1.根据热化学原理求出了298.15K时,合成反应的标准反应热ΔrHmΘ=-(35.65±0.47)kJmol-1,以及嘧霉胺(C12N3H13(s))的标准摩尔生成焓ΔfHmΘ(C12N3H13(s),298.15K)=(198.5±1.5)kJmol-1;用TAMair微量热仪测定了嘧霉胺(C12N3H13(s))在301.15K时对灰葡萄孢菌作用的产热曲线,根据产热曲线求算了在嘧霉胺作用下,灰葡萄孢菌生长代谢的最大发热功率Pmax、最大产热功率的时间tmax、速率常数k和抑制率I等热动力学参数.结果表明:嘧霉胺在低浓度下对灰葡萄孢菌有刺激作用,高浓度下为抑制作用,即嘧霉胺对微生物的生长具有双向生物效应,也称为Hormsis效应.     

The standard molar enthalpy of formation,molar heat capacities,and thermal stability of anhydrous caffeine

The constant-volume energy of combustion of crystalline anhydrous caffeine (C₈H₁₀N₄O₂) in α (lower temperature steady) crystal form was measured by a bomb combustion calorimeter, the standard molar enthalpy of combustion of caffeine at T = 298.15 K was determined to be −(4255.08 ± 4.30) kJ · mol⁻¹, and the standard molar enthalpy of formation was derived as −(322.15 ± 4.80) kJ · mol⁻¹. The heat capacity of caffeine in the same crystal form was measured in the temperature range from (80 to 387) K by an adiabatic calorimeter. No phase transition or thermal anomaly was observed in the above temperature range. The thermal behavior of the compound was further examined by thermogravimetry (TG), differential thermal analysis (DTA) over the range from (300 to 700) K and by differential scanning calorimetry (DSC) over the range from (300 to 540) K, respectively. From the above thermal analysis a (solid–solid) and a (solid–liquid) phase transition of the compound were found at T = (413.39 and 509.00) K, respectively; and the corresponding molar enthalpies of these transitions were determined to be (3.43 ± 0.02) kJ · mol⁻¹for the (solid–solid) transition, and (19.86 ± 0.03) kJ · mol⁻¹ for the (solid–liquid) transition, respectively.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Determination of the interaction enthalpy between microemulsion droplets by isothermal titration microcalorimetry

A new experimental design for the measurement of the real heat of dilution of the microemulsion droplets by isothermal titration microcalorimetry (ITC) has been reported and used to study the interaction enthalpies of the droplets for the system of water/sodium bis(2-ethylhexyl)-sulfosuccinate (AOT)/toluene. The results are in good agreement with those determined from light-scattering experiments.     

Determination of the standard enthalpy of formation of paratungstate A ion

Enthalpy changes for the reaction of HCl(aq) withNa₂WO₄ (aq) were measured at T =  298.15 K in a HT-1000 calorimeter. The standard enthalpy of reaction for the formation ofW₇O₂₄^6 −  (aq) was calculated on the basis of the experimental results, Δ_rH_m^o(298.15K )  =  − (320.7  ±  1.0)kJ · mol ^− 1. Combining this with the values from the literature led to the standard enthalpy of formation of W₇O₂₄^6 − (aq),Δ_fH_m^o (298.15 K)  =  − 6689.8 kJ · mol ^− 1.     

The standard molar enthalpy of formation at 298.15 K of VS1.043 by combustion calorimetry in fluorine

The standard molar enthalpy of formation Δ_fH_m^o of VS_1.043 has been determined by fluorine-combustion calorimetry. The result obtained, −(230.3±2.2) kJ·mol⁻¹ at 298.15 K and p^o = 101.325 kPa, differs significantly from values deduced from high-temperature studies.     

Heat capacities and standard molar enthalpy of formation of pyrimethanil maleic salt and pyrimethanil fumaric salt

Novel anilino-pyrimidine fungicides, pyrimethanil maleic salt, and pyrimethanil fumaric salt (C₂₈H₃₀N₆O₄) were synthesized by a chemical reaction of pyrimethanil with maleic acid/fumaric acid. The low-temperature heat capacities of the two compounds were measured with an adiabatic calorimeter from 80 to 350 K. The heat capacities of pyrimethanil fumaric salt are bigger than that of pyrimethanil maleic salt in the measurement temperature range. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity-fitted curves. The melting points, the molar enthalpies (Δ_fus H _m), and entropies (Δ_fus S _m) of fusion of pyrimethanil maleic salt and pyrimethanil fumaric salt were determined from their DSC curves. The values indicate that pyrimethanil fumaric salt was more thermostable than pyrimethanil maleic salt. The constant-volume energies of combustion (Δ_c U _m ^o ) of pyrimethanil maleic salt and pyrimethanil fumaric salt were measured using an isoperibol oxygen bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpies of formation of the two compounds were derived and determined to be Δ_f H _m ^o (pyrimethanil maleic salt) = ?459.3 ± 4.9 kJ mol^?1 and Δ_f H _m ^o (pyrimethanil fumaric salt) = ?557.2 ± 4.8 kJ mol^?1, respectively. The results suggest that pyrimethanil fumaric salt is more chemically stable than pyrimethanil maleic salt.     

Standard molar enthalpy of formation of the ZnO nanosheets

ZnO nanosheets were prepared by a facile microemulsion-mediated hydrothermal route, and were characterized by X-ray powder diffraction, field-emission scanning electron microscopy, and transmission electron microscopy. As nano ZnO and bulk ZnO possess the same reaction essence, the relationship between standard molar enthalpies of formation of nano ZnO and bulk ZnO was built by designing a novel thermochemical cycle. Combined with microcalorimetry, standard molar enthalpy of formation of the as-prepared ZnO nanosheets at 298.15?K was successfully acquired as (?333.50?±?0.29) kJ?mol^?1. It is an effective strategy for standard molar enthalpies of formation of nano materials through building the relationship with its corresponding bulk material.     

Application of rotate-bomb calorimeter for determining the standard molar enthalpy of formation of Ln(Pdc)3(Phen)

Thirteen solid ternary complexes Ln(Pdc)₃(Phen) (Ln = La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu;) have been synthesized in absolute ethanol by rare-earth element chloride low hydrate reacting with the mixed ligands of ammonium pyrrolidinedithiocarbamate (APdc) and 1,10-phenanthroline · H₂O (o-Phen · H₂O) in the ordinary laboratory atmosphere without any cautions against moisture or air sensitivity. IR spectra of the complexes showed that the Ln³⁺ ion was coordinated with six sulfur atoms of three Pdc⁻ and two nitrogen atoms of o-Phen · H₂O. It was assumed that the coordination number of Ln³⁺ is eight. The constant-volume combustion energies of the complexes, Δ_c U, were determined by a precise rotate-bomb calorimeter at 298.15 K. Their standard molar enthalpies of combustion, Δ_c H _m ^o , and standard molar enthalpies of formation, Δ_f H _m ^o were calculated. The text was submitted by the authors in English.     

微波消解-原子吸收法测定啤酒中的微量铝

利用微波消解-原子吸收法测定了啤酒中的微量铝。在密闭容器中采用微波、HNO3-H2O2消化制备试样溶液,然后在酸性介质中,铝与8-羟基喹啉生成1∶3络合物,通过甲基异丁基甲酮(MIBK)萃取,用氧化亚氮-乙炔火焰原子吸收法测定有机相中铝即可测定啤酒中微量铝。本法在0~500μg/L范围内呈良好的线性关系(R2=0.9991),可用于啤酒中微量铝的测定。     

L-苏糖酸铜的制备及其标准生成焓

L 苏糖酸作为金属离子的载体,可使金属离子易与氨基酸或蛋白质结合而被动物吸收和利用[1]。本文以L 苏糖酸与Cu2(OH)2CO3·xH2O反应后的溶液浓缩加无水甲醇制得水合物Cu(C4H6O5)·0 5H2O(经HPLC分析,纯度>99 9%),用化学分析、元素分析、IR光谱、TD DTG和量热法进行了表征。1　实验部分1 1　试剂与仪器L 抗坏血酸(Vc)、B.R.(东北制药总厂);H2O2、CaCO3、H2C2O4和Cu2(OH)2CO3·xH2O均为A.R.(西安化学试剂厂);2400型元素分析仪(PE公司);Cu2+含量用Na2S2O3滴定法测定;TG 7型热重分析仪(PE公司);BRUKEREQUINOX 5…     

Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

铜-洛美沙星-曙红三元络合物分光光度法测定洛美沙星

pH 4.1的条件下,铜与洛美沙星、曙红反应生成三元络合物,使曙红溶液褪色并产生新的吸收峰,最大褪色峰谷波长位于508 nm,三元络合物吸收峰波长位于546 nm.利用吸收峰、谷的高度差,进行洛美沙星的测定,洛美沙星的质量浓度在0.7～3.8 mg/L范围内符合比耳定律.方法的表观摩尔吸光系数为5.47×104 L·mol-1·cm-1,检出限为0.46 mg/L.该方法用于HCl洛美沙星片剂样品中洛美沙星的测定,准确、灵敏、选择性好.对样品平行6次测定,相对标准偏差为0.42%～3.1%,回收率为92.6%～106.9%.     

Spectrophotometric determination of maneb by ternary complex formation with PAR and CTAB

A rapid, simple, direct, and sensitive method has been developed for the determination of maneb (manganese ethylenebisdithiocarbamate) based on the formation of manganese-4-(2′-pyridylazo) resorcinol complex by a ligand displacement reaction, which is rendered water soluble by a cationic surfactant cetyltrimethylammonium bromide (CTAB) by the formation of an ion association complex. Beer's law is obeyed over the concentration range 0.08–2.4 μg/ml of the final solution at 500 nm in pH range 8–12. The molar absorptivity and Sandell's sensitivity are calculated to be 8.84 × 10⁴ l.mol⁻¹.cm⁻¹ and 0.003 μg/cm², respectively. The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixture, grain samples and vegetables.