Pyrene as chromophore and electrophore: encapsulation in a rigid polyphenylene shell

Starting from the fourfold ethynyl-substituted chromophore 1,3,6,8-tetraethynylpyrene as core, a series of polyphenylene dendrimers was prepared in high yield by combining divergent and convergent growth methods. The fluorescence quantum yields (Q(f)>0.92) of the encapsulated pyrene chromophore were independent of the size of the polyphenylene shell. Fluorescence quenching studies and temperature-dependent fluorescence spectroscopy were performed to investigate the site isolation of the core. They indicate that a second-generation dendrimer layer is needed to efficiently shield the encapsulated pyrene and prevent aggregate formation. Alkali-metal reduction of the encapsulated pyrene core was carried out to afford the corresponding pyrene radical anions, for which hampered electron transfer to the core was observed with increasing dendrimer generation, which is further proof of the site isolation due to the polyphenylene shell. To improve film formation and solubility of the material, solubilizing alkyl chains were introduced on the periphery of the spherical particles. Furthermore, highly transparent films obtained by a simple drop-casting method showed blue emission mainly from the unaggregated species. The materials presented herein combine high quantum efficiency, good solubility, and improved film-forming properties, which make them possible candidates for several applications in electronic devices.     

Preparation and spectroscopic properties of multiluminophore luminescent oxygen and temperature sensor films

A new luminescent oxygen and temperature sensor has been developed that utilizes two luminescent dyes, 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin platinum(II) (PtTFPP, the oxygen sensor) and tris(1,10-phenanthroline)ruthenium(II) dichloride (Ruphen, the temperature sensor). The two dyes are dispersed in an oxygen-permeable polymer binder consisting of a copolymer of 4-tert-butylstyrene (tBS) and 2,2,2-trifluoroethyl methacrylate (p-tBS-co-TFEM). To alleviate energy transfer and other quenching interactions between the two luminescent dyes in the p-tBS-co-TFEM binder, the Ruphen temperature sensor is encapsulated in polyacrylonitrile (PAN) polymer nanospheres that are prepared by coprecipitation of PAN and Ruphen from N,N-dimethylformamide solution. The temperature and air-pressure response of the emission from the sensor film is fully characterized by using emission spectroscopy. The emission from the two luminescent dyes is spectrally well-separated. The intensity of the Ruphen emission varies strongly with temperature (approximately 1.4% degrees C(-1)), whereas the intensity of the PtTFPP emission varies with temperature and air pressure. The two-dye luminescent coating is useful as a pressure-sensitive paint (PSP), where the emission from the Ruphen temperature sensor is used to correct for the temperature dependence of the pressure response of the PtTFPP sensor. To demonstrate the PSP application, a coupon coated with the sensor was imaged using a CCD camera, and the CCD images were analyzed by intensity ratio methods. Spectroscopic studies were also carried out on a sensor that contains three dyes in order to demonstrate the feasibility of including an intensity reference dye along with the temperature and pressure dyes into the sensor.     

Controlling solubility and modulating peripheral function in dendrimer encapsulated dyes

The synthesis of large dendrons and dendrimers with site-isolated dyes at their core has been explored. The dyes selected for this work were coumarin 343 and pentathiophene, as energy transfer processes prevail when the two dyes are intimately mixed but each should behave independently of the other if site-isolation is achieved. Because the two dyes have very different functional characteristics, a protocol involving orthogonal protecting groups and allowing the use of a single family of electroactive dendrons for their encapsulation had to be developed. The synthetic protocol must balance the need to incorporate electroactive groups at the periphery of the dendrons with the requirement for high solubility and a size sufficient to fully encapsulate the central dye. Because of their poor solubility and tendency to crystallize, dendrons with uniform triarylamine substitution proved unsatisfactory leading to the development of new unsymmetrical dendrons with alternating branched alkyl groups and triarylamine moieties at their periphery. These dendrons, which show excellent solubility and no tendency to crystallize, were assembled into large dendrimers using a modular protocol with the light emitting dye at their core. It is expected that the large size of the dendritic shell will provide effective site-isolation for the encapsulated central dyes enabling them to exhibit their intrinsic emission properties with minimal energy transfer between neighboring core fluorophores when processed in bulk thin films.     

Mechanism and application of a microcapsule enabled multicatalyst reaction

In this paper, we describe the development and application of a multistep one-pot reaction that is made possible by the site isolation of two otherwise incompatible catalysts. We prepared a microencapsulated amine catalyst by interfacial polymerization and used it in conjunction with a nickel-based catalyst for the transformation of an aldehyde to a Michael adduct via a nitroalkene intermediate. The amine-catalyzed conversion of an aldehyde to a nitroalkene was found to proceed through an imine rather than a nitroalcohol. Kinetic studies indicated that the reaction is first order in both the nickel catalyst and the shell of the encapsulated amine catalyst. Furthermore, we provide evidence against interaction between amine and nickel catalysts and present kinetic data that demonstrates that there is a rate enhancement of the Michael addition due to the urea groups on the surface of the microencapsulated catalyst. We applied our one-pot reaction to the development of a new synthetic route for pregabalin that proceeds with an overall yield of 74%.     

Core-shell nanoparticles: characterization and study of their use for the encapsulation of hydrophobic fluorescent dyes

Core-shell nanocapsules intended to be used as drug scavengers were prepared using a surfactant mixture containing octadecyltrimethoxysilane (OTMS) as a reactive amphiphile, to form spherical templates. A siloxane shell was grown on the surface of the templates by reacting tetramethoxysilane (TMOS) with the silanol groups obtained after the hydrolysis and condensation of OTMS. Dynamic light scattering (DLS) showed that particles with diameters in the range of 100-200 nm were obtained, with core and shell sizes controlled by varying component compositions. Atomic force microscopy (AFM) was used to study the effect of the silica coating of the templates on their robustness after deposition on a substrate. Subsequently, we present studies on the encapsulation of two hydrophobic fluorescent dyes, which are sensors of polarity and rigidity. Steady-state fluorescence spectroscopy was used to examine the fluorescence response of the dyes before and after shell growth. Changes in the emission of the encapsulated dyes were related to changes in the polarity and rigidity of the microenvironment where the dyes were located and correlated to the AFM results. Finally, dye-free core-shell particles were used to sequester the dyes from aqueous suspensions. Fluorescence of the sequestered species was compared to the dye-loaded particles to determine the final fate of the fluorophores in the nanoparticles.     

Fighting Aggregation‐Caused Quenching and Leakage of Dyes in Fluorescent Polymer Nanoparticles: Universal Role of Counterion

Dye‐loaded polymer nanoparticles (NPs) emerge as a powerful tool for bioimaging applications, owing to their exceptional brightness and controlled small size. However, aggregation‐caused quenching (ACQ) and leakage of dyes at high loading remain important challenges of these nanomaterials. The use of bulky hydrophobic counterions has been recently proposed as an effective approach to minimize ACQ and dye leakage, but the role of counterion structure is still poorly understood. Here, a systematic study based on ten counterions, ranging from small hydrophilic perchlorate up to large hydrophobic tetraphenylborate derivatives, reveals how counterion nature can control encapsulation and emission of a cationic dye (rhodamine B octadecyl ester) in NPs prepared by nanoprecipitation of a biodegradable polymer, poly‐lactide‐co‐glycolide (PLGA). We found that increase in counterion hydrophobicity enhances dye encapsulation efficiency and prevents dye adsorption at the particle surface. Cellular imaging studies revealed that ≥95 % encapsulation efficiency, achieved with most hydrophobic counterions (fluorinated tetraphenylborates), is absolutely required because non‐encapsulated dye species at the surface of NPs are the origin of dye leakage and strong fluorescence background in cells. The size of counterions is found to be essential to prevent ACQ, where the largest species, serving as effective spacer between dyes, provide the highest fluorescence quantum yield. Moreover, we found that the most hydrophobic counterions favor dye–dye coupling inside NPs, leading to ON/OFF fluorescence switching of single particles. By contrast, less hydrophobic counterions tend to disperse dyes in the polymer matrix favoring stable emission of NPs. The obtained structure‐property relationships validate the counterion‐based approach as a mature concept to fight ACQ and dye leakage in the development of advanced polymeric nanomaterials with controlled optical properties.     

Oligonucleotide-stabilized Ag nanocluster fluorophores

Single-stranded oligonucleotides stabilize highly fluorescent Ag nanoclusters, with emission colors tunable via DNA sequence. We utilized DNA microarrays to optimize these scaffold sequences for creating nearly spectrally pure Ag nanocluster fluorophores that are highly photostable and exhibit great buffer stability. Five different nanocluster emitters have been created with tunable emission from the blue to the near-IR and excellent photophysical properties. Ensemble and single molecule fluorescence studies show that oligonucleotide encapsulated Ag nanoclusters exhibit significantly greater photostability and higher emission rates than commonly used cyanine dyes.     

Synthesis and characterization of dually labeled Pickering-type stabilized polymer nanoparticles in a downscaled miniemulsion system

Dual fluorescently labeled polymer particles were prepared in a downscaled Pickering-type miniemulsion system. Stable dispersions were obtained and the size of the hybrid particles could be varied between ca. 180 and 430 nm. Silica nanoparticles were employed as sole emulsifier, which were labeled by a fluorescein dye (FITC) or (encapsulated) quantum dots, and the polymer core was labeled by a perylene derivative. Downscaling of the Pickering-type miniemulsion system is intriguing by itself as it allows the use of precious nanoparticles as emulsifiers. Here, silica particles with a fluorescent core and an overall diameter between 20 and 40 nm were prepared and employed as stabilizer. The dual excitation and emission of both dyes was tested by fluorescence measurements and confocal laser scanning microscopy (cLSM).     

Water-soluble phosphonate-substituted BODIPY derivatives with tunable emission channels

Water-soluble BODIPY dyes have been readily obtained by introduction of phosphonate fragments either on the boron for the green and yellow emitting dyes or on the side chain for the red emitting dyes. Hydrolysis of the phosphonate is realized at the end of the reaction sequence and allows isolation of the targets by precipitation. All these novel dyes are soluble and fluorescent in water with quantum yields in the 23-59% range and emission wavelength spanning from 667 to 509 nm.     

Imaging-Guided Delivery of a Hydrophilic Drug to Eukaryotic Cells Based on Its Hydrophobic Ion Pairing with Poly(hexamethylene guanidine) in a Maleated Chitosan Carrier

Imaging-guided delivery is developed for hydrophobic drugs, and to a much lesser extent, hydrophilic ones. In this work we have designed a novel strategy for real-time monitoring of hydrophilic drug delivery. Traditionally, the drug and the dye are covalently attached to a nanocarrier or are electrostatically adsorbed. Recently, we found an efficient way to bind the drug by ion-paring with an appropriate counter-ion to form the aggregate that embeds a hydrophobic dye with a considerable fluorescence enhancement. We synthesized a series of carbocyanine dyes of hydrophobicity sufficient for solubilization in hydrophobic ion pairs, which restores their emission in the near-infrared (NIR) region upon the formation of the ternary aggregates. To avoid using toxic surfactants, we applied an amphiphilic polymer-oligomer poly(hexamethylene guanidine) (PHMG) as a counter-ion. Сeftriaxone was used as a model hydrophilic drug ensuring the highest fluorescent signal. The so-formed drug–counter-ion–dye aggregates were encapsulated into a cross-linked maleated chitosan carrier. Confocal laser scanning microscopy (CLSM) studies have demonstrated internalization of the encapsulated model drug by breast adenocarcinoma cells at 40 min after treatment. These results suggest the potential application of hydrophobic ion pairs containing an NIR dye in imaging-guided delivery of hydrophilic compounds.     

Two‐Photon‐Induced Fluorescence in New π‐Expanded Diketopyrrolopyrroles

Structurally unique π‐expanded diketopyrrolopyrroles (EDPP) were designed and synthesized. Strategic placement of a fluorene scaffold at the periphery of a diketopyrrolopyrrole through tandem Friedel–Crafts‐dehydration reactions resulted in dyes with supreme solubility. The structure of the dyes was confirmed by X‐ray crystallography verifying a nearly flattened arrangement of the ten fused rings. Despite the extended ring system, the dye still preserved good solubility and was further functionalized by using Pd‐catalyzed coupling reactions, such as the Buchwald–Hartwig amination. Photophysical studies of these new functional dyes revealed that they possess enhanced properties when compared with expanded DPPs in terms of two‐photon absorption cross‐section. It is further demonstrated that in addition to the initial diacetals, the final electrophilic cyclization step can also be applied to diketones. By placing two amine groups at peripheral positions of the resulting dyes, values of two‐photon absorption cross‐section on the level of 2000 GM around 1000 nm were achieved, which in combination with high fluorescence quantum yield (Φ_fl), generated a two‐photon brightness of approximately 1600 GM. These characteristics in combination with strong red emission (665 nm) make these new π‐expanded diketopyrrolopyrroles of major promise as two‐photon dyes for bioimaging applications. Finally, the corresponding N‐alkylated DPPs displayed a solid‐state fluorescence.     

Color and fastness of natural dyes encapsulated by a sol-gel process for dyeing natural and synthetic fibers

Natural dyes, namely, indigo carmine, cochineal carmine, curcumin and annatto, were encapsulated in silica by a sol-gel method and applied in the dyeing of different textile fibers by exhaustion. For comparative reasons, dyeing using the free (non-encapsulated) bare dyes was also carried out. The hybrid materials were analyzed by a set of techniques to investigate their elemental, structural, textural and morphological properties, and the results showed that it was possible to obtain stable natural dyes for applications in textile dyeing. The silica-structured dyes showed better affinities with the fibers (WO, PA, PAC and PET) in dyeing with cochineal carmine, while cotton (CO) showed better affinities with the encapsulated curcumin and annatto dyes. The performances of the encapsulated dyes were evaluated by color and washing fastness measurements and resulted in improved dye absorption and wash fastness properties. The color change and color transfer measurements of the encapsulated dyes were better (rated at 4–5 on a scale of 1–5) compared to the bare dyes.

Open image in new window

     

Red‐Emitting Rhodamines with Hydroxylated,Sulfonated, and Phosphorylated Dye Residues and Their Use in Fluorescence Nanoscopy

Fluorescent dyes emitting red light are frequently used in conventional and super‐resolution microscopy of biological samples, although the variety of the useful dyes is limited. We describe the synthesis of rhodamine‐based fluorescent dyes with absorption and emission maxima in the range of 621–637 and 644–660 nm, respectively and demonstrate their high performance in confocal and stimulated emission depletion (STED) microscopy. New dyes were prepared by means of reliable chemical transformations applied to a rhodamine scaffold with three variable positions. They feature polarity, water solubility, variable net charges, improved stabilities of N‐hydroxysuccinimidyl (NHS) esters, as well as large fluorescence quantum yields in dye solutions and antibody conjugates. The photophysical and imaging properties of dyes containing three different polar groups, namely primary phosphate, sulfonic acid (in two different positions), and hydroxyl were compared. A dye with two primary phosphate groups was explored as a valuable alternative to dyes with “classical” sulfonic acid groups. Due to the increased net charge of the phosphorylated dye (q=?4 at pH 8), it demonstrated a far better electrophoretic mobility compared with analogues with two sulfonic acid groups (q=?2). As an example, one fluorescent dye was designed to be especially convenient for practical use. It is characterized by sufficiently high chemical stability of the NHS ester, its simple isolation, handling, and solubility in aqueous buffers, as well as in organic solvents. All these features, accompanied by a zero net charge in conjugates, were accomplished by the introduction of hydrophilic groups of two types: two hydroxyl groups and one sulfonic acid residue.     

Novel D-A-D Fluorescent Dyes Based on 9-(p-Tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a Donor Unit for Solution-Processed Organic Light-Emitting-Diodes

New fluorescent D-A-D dyes containing 9-(p-tolyl)-2,3,4,4a,9,9a-hexahydro-1H-carbazole as a donor unit and 2,1,3-benzochalcogenadiazoles as an electron-withdrawing group were synthesized. The photoluminescent and electroluminescent properties of novel dyes for fluorescent OLED application were investigated. It was demonstrated that the replacement of lightweight heteroatoms by heavier ones enables the fine tuning of the maximum emission without significantly reducing the luminescence quantum yield. The maximum quantum yield value of 62.6% for derivatives based on 2,1,3-benzoxadiazole (1a) in cyclohexane was achieved. Two devices with the architecture of glass/ITO/PEDOT-PSS/poly-TPD/EML/TPBi/LiF/Al (EML = emitting layer) were fabricated to check the suitability of the synthesized compounds as a single active emission layer in OLED. These OLEDs exhibited clear red electroluminescence of the dyes with the maximum current efficiency of 0.85 Cd/A.     

Preparation of Fluorescence Tunable Polymer Nanoparticles by One-step Mini-emulsion

Fluorescence tunable polymer nanoparticles were prepared by incorporating two hydrophobic fluorescent dyes (9, 10-diphenylanthracene: DPA and nitrobenzoxadiazolyl: NBD) into polymethylmethacrylate (PMMA) nanoparticles via one-step mini-emulsion polymerization method. The prepared fluorescent nanoparticles exhibit the spectral properties of both DPA and NBD dye, indicating that the two fluorophores have been incorporated into the nanoparticles. The nanoparticles greatly enhance the fluorescence emission of the two hydrophobic dyes in aqueous media probably by providing good protection of the dye molecules in the polymer nanoparticles matrix. Moreover, by varying the doping ratio of the two hydrophobic dyes, the polymer nanoparticles exhibit tunable and distinguishable emission characteristics under a single wavelength excitation via occuring fluorescence resonance energy transfer (FRET).     

π‐Expanded α,β‐Unsaturated Ketones: Synthesis,Optical Properties,and Two‐Photon‐Induced Polymerization

A library of π‐expanded α,β‐unsaturated ketones was designed and synthesized. They were prepared by a combination of Wittig reaction, Sonogashira reaction, and aldol condensation. It was further demonstrated that the double aldol condensation can be performed effectively for highly polarized styrene‐ and diphenylacetylene‐derived aldehydes. The strategic placement of two dialkylamino groups at the periphery of D ‐π‐A‐π‐D molecules resulted in dyes with excellent solubility. These ketones absorb light in the region 400–550 nm. Many of them display strong solvatochromism so that the emission ranges from 530–580 nm in toluene to the near‐IR region in benzonitrile. Ketones based on cyclobutanone as central moieties display very high fluorescence quantum yields in nonpolar solvents, which decrease drastically in polar media. Photophysical studies of these new functional dyes revealed that they possess an enhanced two‐photon absorption cross section when compared with simpler ketone derivatives. Due to strong polarization of the resulting dyes, values of two‐photon absorption cross sections on the level of 200–300 GM at 800 nm were achieved, and thanks to that as well as the presence of the keto group, these new two‐photon initiators display excellent performance so that the operating region is 5–75 mW in some cases.     

Design and synthesis of squaraine based near infrared fluorescent probes

A novel class of dialkylanthracene containing squaraine dyes (Sq1-3) possessing intense absorption and emission in the NIR region has been synthesized. Structural and electronic features investigated using DFT methods suggest that the significant bathochromic shifts observed on replacing dialkylaniline by dialkylanthracene in this class of molecules can be attributed to a reduction in the HOMO-LUMO gap mainly due to enhanced hydrogen bonding between the carbonyl group of the cyclobutane ring and the neighboring aromatic hydrogen in the dyes containing the anthracene moiety. The absence of fluorescence in aqueous media and high fluorescence when encapsulated into hydrophobic domains make this class of dyes especially useful as probes for mapping such domains in biological systems.     

Dibenzothiophene Sulfone Derivatives as Plasma Membrane Dyes

Dibenzothiophene 5,5-dioxide (DBTOO) derivatives have recently been shown to processes utility as fluorescent cell dyes. In an effort to extend the functionality of DBTOO-based dyes to include the visualization of cellular membranes, two lipophilic DBTOO were synthesized and their ability to incorporate into the plasma membrane of HeLa cells was examined by fluorescent microscopy. The photophysical properties of the two new DBTOO derivatives were determined and both have good fluorescent quantum yields and a visible blue emission. Due to agreeable wavelengths of excitation and emission, a standard 4′,6-diamindino-2-phenylindole (DAPI) filter set worked well with these dyes. After co-staining, it was confirmed that both DBTOO dyes localized in the plasma membrane. The quality of the overlap was quantified using Pearson correlation coefficient, which indicated a strong overlap between the DBTOO dyes and the standard plasma membrane dye. The novel dyes also displayed relatively low toxicity to the HeLa cells with IC₅₀ between 10 and 100 µm . Thus, this work reports a new use of DBTOO derivatives as fluorescent microscopy stains.     

White Emitters by Tuning the Excited‐State Intramolecular Proton‐Transfer Fluorescence Emission in 2‐(2′‐Hydroxybenzofuran)benzoxazole Dyes

The synthesis, structural, and photophysical properties of a new series of original dyes based on 2‐(2′‐hydroxybenzofuran)benzoxazole (HBBO) is reported. Upon photoexcitation, these dyes exhibit intense dual fluorescence with contribution from the enol (E*) and the keto (K*) emission, with K* being formed through excited‐state intramolecular proton transfer (ESIPT). We show that the ratio of emission intensity E*/K* can be fine‐tuned by judiciously decorating the molecular core with electron‐donating or ‐attracting substituents. Push–pull dyes 9 and 10 functionalized by a strong donor (nNBu₂) and a strong acceptor group (CF₃ and CN, respectively) exhibit intense dual emission, particularly in apolar solvents such as cyclohexane in which the maximum wavelength of the two bands is the more strongly separated. Moreover, all dyes exhibit strong solid‐state dual emission in a KBr matrix and polymer films with enhanced quantum yields reaching up to 54 %. A wise selection of substituents led to white emission both in solution and in the solid state. Finally, these experimental results were analyzed by time‐dependent density functional theory (TD‐DFT) calculations, which confirm that, on the one hand, only E* and K* emission are present (no rotamer) and, on the other hand, the relative free energies of the two tautomers in the excited state guide the ratio of the E*/K* emission intensities.     

The effect of dyes on photo-induced chemiluminescence emission from polymers

Weak photo-induced chemiluminescence (PICL) emission is observed when polymers are exposed to UVA or visible light. The presence of dyes can either increase PICL intensity via Type I photosensitisation which generates polymer free radicals, or reduce it via photo-protection. PICL studies on the eight Blue Wool Standards (BWSs) that are used commercially as lightfastness standards show higher PICL intensity from the least photostable BWSs that use triphenylmethane dyes and lower intensity from more photostable BWSs using UVA and visible wavelengths. The relative PICL intensities do not correlate in a stepwise manner with lightfastness ratings of the BWSs. However dye/polymer combinations that emit high levels of PICL relative to the undyed material are unlikely to have acceptable lightfastness. The xanthene dyes fluorescein and eosin Y are more strongly photosensitising than triphenylmethane dyes on wool and both produce higher PICL emission than undyed wool when irradiated with visible light.