对氯硝基苯在含镧的镍钼硼奈米触媒上的氢化反应

钼和镧是好的镍硼触媒的促进剂, 对于对氯硝基苯氢化反应有好的效果, 因此同时加入钼和镧在镍硼触媒上应该是有趣的研究题目. 本研究利用化学还原法制备了一系列含有不同量镧的镧钼镍触媒, 醋酸镍、钼酸胺及硝酸镧同时加入含有甲醇的水溶液中. 以X光绕射, 穿透式电子显微镜、高分辨率电子显微镜及X光光电能谱仪鉴定了这些触媒. 对氯硝基苯氢化反应是在批次反应器中于333 K、1.2 MPa氢气压力及500 r/min转速下操作. 即使在镍钼硼中加入很少量的镧, 对提高活性及对氯苯胺的选择性都有显著的效果, 加入适量的镧可以抑制镍钼硼的长范围的结晶排列, 并保持镍钼硼在非结晶状态. 镧以氧化态存在, 其功效为阻隔物, 避免镍钼硼聚集, 但是过量的镧会有相反的效果, 镧和镍的适当比例是0.2.     

碳纳米管微结构的改变对其容量性能的影响

以KOH为活性剂，通过在高温下将碳纳米管进行活化处理来实现对碳纳米管管壁结构的改变，得到了比表面积和孔容分别是活化处理前约3倍和1.5倍的活性碳纳米管.将活化处理前后两种碳纳米管分别制作成电化学超级电容器电极，在充满氩气的无水手套箱组装成模拟电化学超级电容器，在恒流充放电模式下进行电化学可逆容量的测试，发现活性碳纳米管的电化学容量远高于活化前碳纳米管，是它的2倍.从而发现碳纳米管被打断，管壁变粗糙的活性碳纳米管比一般碳纳米管更适合用于电化学超级电容器电极材料.     

尼龙/碳纳米管复合材料研究进展

碳纳米管(CNTs)由于其独特的结构,较高的长径比,较大的比表面积,且具有超强的力学性能和良好的导热性,已经证明是塑料的非常优异的导电填料,聚合物基碳纳米管复合材料可望应用于材料领域的多个方面,尤其在汽车、飞机及其它飞行器的制造等军事和商业应用上带来革命性的突破。本文介绍了碳纳米管的结构形态和碳纳米管的制备、纯化、修饰方法及聚合物基碳纳米管复合材料的制备、性能,并综述了近几年来尼龙/碳纳米管复合材料的研究进展及应用前景。     

Ru/ZSM-5催化葡萄糖选择性加氢制备山梨醇(英)

采用无有机模板剂一步法制备了Ru/ZSM-5催化剂,利用X射线衍射、N₂吸附-脱附、NH₃-程序升温脱附和CO₂-程序升温脱附、扫描电镜和透射电镜等方法对催化剂进行了表征.考察了反应温度、钌负载量和催化剂重复利用等因素对Ru/ZSM-5上葡萄糖加氢反应性能的影响,并与浸渍法制备的Ru/ZSM-5催化剂进行了对比.结果表明,与传统浸渍法相比,一步法制备的Ru/ZSM-5催化剂钌粒子具有更高的分散性和稳定性.在120℃和4 MPa的温和反应条件下,葡萄糖接近完全转化,山梨醇选择性高达99.2%,催化剂可重复利用5次,仍保持较高活性.     

Improvement of field emission properties from screen‐printed CNTs cathodes by heat treatment in a C2H2/H2 gas mixture

We developed a posttreatment method for the screen‐printed carbon nanotubes (CNTs) cathode to improve its field emission characteristics. The treatment was carried out at 500 °C and 20 kPa for 20 min in the atmosphere of C₂H₂/H₂ (volume ratio 1:2). After the treatment, the field emission characteristics were greatly improved. The turn‐on field lowered from 5.0 to 1.6 V/µm, and the emission current density increased from 2 × 10^?4 to 1.0 mA/cm² at the electric field of 2.6 V/µm. In the mean time, the emission site density and uniformity were significantly increased. Scanning electron microscope images revealed that a new top layer of CNTs film has re‐grown on the surface of the printed CNTs cathode during the treatment. This new re‐grown CNTs layer contributes to the drastic enhancement of field emission from the printed cathode. This heat‐treatment technique is very promising for practical application of CNTs in field emission display. Copyright © 2006 John Wiley & Sons, Ltd.     

层状双金属氢氧化物/碳纳米管复合物的制备及在有机溶剂中的分散

通过硝酸处理在碳纳米管(CNTs)表面生成了羧基(-COOH)基团, 随后采用尿素法在其水悬浮液中原位合成了层状双金属氢氧化物(LDH), 获得了层状双金属氢氧化物/碳纳米管复合物(LDH/CNTs), 考察了CNTs用量对LDH形貌与结构的影响. 结果表明, CNTs的用量对LDH的产率及结构无显著影响; 但当CNTs用量较低(<0.2 g/L)或过高(>4.0 g/L)时, 会导致LDH的粒径分布变宽. 对LDH/CNTs进行氯化及有机化处理, 获得了十二烷基苯磺酸根离子(DBS)插层的DBS-LDH/CNTs. 对DBS-LDH/CNTs在不同有机溶剂中分散及剥离程度的研究发现, DBS-LDH/CNTs在丁醇、 乙醇及二甲苯中均可良好分散且其悬浮液较稳定, LDH在不同溶剂中的剥离程度为丁醇>乙醇>二甲苯>四氢呋喃.     

Effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on selective hydrogenation of cinnamaldehyde over Pt/CNTs catalyst

Summary The effect of transition metals (Cr, Mn, Fe, Co, Ni and Cu) on the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding semi-hydrogenated product over Pt/CNTs catalyst has been studied in ethanol at 343 K under 2.0 MPa H₂ pressure. PtNi/CNTs catalyst shows good catalytic activity and selectivity of C=C bond hydrogenation, 68.4% for conversion of CMA and 97.0% for selectivity of hydrocinnamaldehyde (HCMA). PtCo/CNTs catalyst shows good catalytic activity and selectivity of C=O bond hydrogenation, 91.3% for conversion of CMA and 88.2% for selectivity of cinnamylalcohol (CMO).     

TiO2晶面依赖的Ir-TiOx相互作用对Ir/TiO2催化剂巴豆醛选择性加氢性能的影响

α,β-不饱和醇是一类重要的精细化学品,主要通过α,β-不饱和醛选择性加氢获得.由于α,β-不饱和醛分子中含有共轭的C=C键和C=O键,且后者键能更大,在热力学和动力学上均不利于C=O键的选择性加氢生成α,β-不饱和醇.因此,提高α,β-不饱和醛中C=O的加氢选择性是催化领域中一项挑战性的课题.巴豆醛属于典型的α,β-不饱和醛,研究其选择性加氢生成巴豆醇具有广泛的代表意义;Ir负载在具有还原性载体(如TiO2)上时,表现出很好的C=O加氢选择性,因此,成为近年来的研究热点.由于暴露不同晶面的TiO2具有不同的形貌和电子结构,因此研究Ir-TiO2相互作用的晶面依赖性及其对巴豆醛选择性加氢反应的影响具有重要意义.本文以分别暴露{101}、{100}和{001}晶面的锐钛矿TiO2纳米晶为载体,制备了负载型Ir/TiO2催化剂,系统研究了催化剂经过不同的预处理过程(在不同温度下H2还原和O2再氧化)后对巴豆醛的气相选择性加氢的性能.利用高分辨透射电镜、原位X射线光电子能谱和原位漫反射红外光谱及氨程序升温脱附等技术研究发现,预处理条件显著改变了Ir-TiOx的相互作用,包括Ir金属的几何、电子性质及催化剂表面酸性.这种相互作用与TiO2的暴露晶面密切相关,从而改变了不同Ir/TiO2催化剂上不同加氢反应行为.研究结果表明,经300℃预还原的Ir/TiO2-{101}催化剂催化性能最好,在80℃下初始反应速率为166.1 μmol g-Ir-1 s-1,巴豆醇的生成转化频率为0.022 s-1.与其他催化剂相比,Ir/TiO2-{101}催化剂表面Ir0浓度最高,表面酸度适中,因此表现出最佳的催化性能.同时Ir-TiOx界面在反应中的协同作用,对H2和巴豆醛分子中C=O键的吸附和活化起到了关键作用.然而当催化剂经过400℃的H2预还原后,由于产生了强的金属-载体相互作用使得TiOx对Ir粒子进行了包裹从而导致Ir-TiOx界面缺失,因而催化剂催化巴豆醛加氢性能降低.本文为理解金属-载体相互作用对巴豆醛选择性加氢反应的影响提供了新的见解,并为设计高性能α,β-不饱和醛选择性加氢催化剂提供了理论依据.     

Pd/TiN nanocomposite catalysts for selective hydrogenation of phenol and its derivatives

Pd/TiN nanocomposite catalysts were fabricated for one-step selective hydrogenation of phenol to cyclohexanone successfully. High conversion of phenol (99%) and selectivity of cyclohexanone (98%) were obtained at 30℃ and 0.2 MPa H₂ for 12 h in the mixed solvents of H₂O and CH₂Cl₂. The Pd nanoparticles were stable in the reaction, and no aggregation was detected after four successive runs. The catalytic activity and selectivity depended on slightly the Pd particle sizes. The generality of the catalysts for this reaction was demonstrated by the selective hydrogenation of phenol derivatives, which showed that the catalyst was selective for the formation of cyclohexanone.     

Effect of polyvinyl alcohol on rare earths (Gd and Tb) separation by extraction resin

Small amounts of polyvinyl alcohol (PVA; 0.5-1.5 wt.%) added to extraction resin was synthesized by suspension polymerization. Their effects on the separation of rare earths (RE) were then investigated by conducting a relative comparison with the performance of pure extraction resin. The supporter and extractant of extraction resin were styrene-divinyl benzene copolymer and 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]), respectively. The size of PVA added extraction resin was reduced by 40% particle size of pure extraction resin. Furthermore, a higher level of PVA addition, shorter effluent range and smaller resolution values were shown in the extraction. In constant PVA added extraction resin, more diluted effluent concentration, longer effluent range and bigger resolution values were shown in the extraction. This could be the result of the bonding force between the rare earths and the extraction resin due to the nature of the interaction between the OH⁻ group in PVA and the OH⁻ group in extractants such as HEH[EHP]. Thus, the bonding force between the RE and extractants was determined by the level of PVA in the resins and the acidity of the effluent solution became another important factor in the extraction performance of the rare earths. As a result, the optimal level of PVA addition and the concentration of effluent for RE (Gd and Tb) separation were determined to be 0.5 wt.% of PVA and 0.05 M HCl of effluent, respectively.     

碳纳米管结构对碳纳米管载Pt催化剂电催化性能的影响

在制备单、双壁及不同管径的多壁碳纳米管(CNTs)的基础上, 用液相还原法把Pt沉积到单、双壁和管径不同的多壁CNTs上. 发现制得的CNTs载Pt(Pt/CNTs)催化剂对甲醇氧化的电催化活性随CNTs管径减小而增加. 这归结于管径小的CNTs的比表面积较大, 含氧基团多, 有利于提高Pt粒子分散度, 加上管径小的单壁CNTs具有更高的导电性, 这些因素都有利于提高Pt/CNTs催化剂对甲醇氧化的电催化活性.     

水对Ni/MgAlO催化丙酮加氢的影响

研究了H2O对Ni/MgAlO催化剂上丙酮加氢为异丙醇的催化反应的影响。结果发现,在丙酮中添加少量H2O可提高丙酮转化率,但超过5%的H2O量则会显著降低催化剂活性。吸附量热结果表明,催化剂表面吸附少量H2O会明显降低异丙醇的吸附热,但对丙酮吸附热的影响较小,这也许是反应体系中少量的H2O能促进丙酮加氢活性的原因之一。当催化剂表面吸附较多H2O后,丙酮、异丙醇和H2的吸附热都降低了,因此反而抑制了丙酮的加氢反应。此外,红外光谱结果表明,预吸附水抑制了催化剂表面异丙醇脱氢生成丙酮,并抑制吸附的丙酮在表面生成烯醇盐或异丙叉丙酮等物种,这也许是少量水能促进丙酮加氢生成异丙醇的另一个重要原因。     

Magnetic properties of ternary sodium oxides NaLnO2 (Ln=rare earths)

Magnetic properties of ternary sodium oxides NaLnO₂ (Ln=rare earths) are investigated. Their crystal structures are grouped into three types of structures, which are α-LiFeO₂, β-LiFeO₂, and α-NaFeO₂, depending on the size of rare earths. Their magnetic susceptibilities and specific heats have been measured from 1.8 to 300 K. Among them, NaGdO₂, NaDyO₂, and NaHoO₂ show antiferromagnetic transitions at 2.4, 2.2, and 2.4 K, respectively, and NaNdO₂ transforms to the ferromagnetic state below 2.4 K. NaSmO₂, NaErO₂, and NaYbO₂ exhibit a magnetic anomaly below 1.8 K.     

Development and application of carbon nanotubes assisted electromembrane extraction (CNTs/EME) for the determination of buprenorphine as a model of basic drugs from urine samples

In this work carbon nanotubes assisted electromembrane extraction (CNTs/EME) coupled with capillary electrophoresis (CE) and ultraviolet (UV) detection was developed for the determination of buprenorphine as a model of basic drugs from urine samples. Carbon nanotubes reinforced hollow fiber was used in this research. Here the CNTs serve as a sorbent and provide an additional pathway for solute transport. The presence of CNTs in the hollow fiber wall increased the effective surface area and the overall partition coefficient on the membrane; and lead to an enhancement in the analyte transport. For investigating the influence of the presence of CNTs in the SLM on the extraction efficiency, a comparative study was carried out between EME and CNTs/EME methods. Optimization of the variables affecting these methods was carried out in order to achieve the best extraction efficiency. Optimal extractions were accomplished with NPOE as the SLM, with 200 V as the driving force, and with pH 2.0 in the donor and pH 1.0 in the acceptor solutions with the whole assembly agitated at 750 rpm after 25 min and 15 min for EME and CNTs/EME, respectively.     

水对Ni/MgAlO催化丙酮加氢的影响

研究了H2O对Ni/MgAlO催化剂上丙酮加氢为异丙醇的催化反应的影响。结果发现,在丙酮中添加少量H2O可提高丙酮转化率,但超过5%的H2O量则会显著降低催化剂活性。吸附量热结果表明,催化剂表面吸附少量H2O会明显降低异丙醇的吸附热,但对丙酮吸附热的影响较小,这也许是反应体系中少量的H2O能促进丙酮加氢活性的原因之一。当催化剂表面吸附较多H2O后,丙酮、异丙醇和H2的吸附热都降低了,因此反而抑制了丙酮的加氢反应。此外,红外光谱结果表明,预吸附水抑制了催化剂表面异丙醇脱氢生成丙酮,并抑制吸附的丙酮在表面生成烯醇盐或异丙叉丙酮等物种,这也许是少量水能促进丙酮加氢生成异丙醇的另一个重要原因。     

1-辛烯在Co/CNTs催化剂上的氢甲酰化研究： 钌的促进作用

采用等体积浸渍法制备了碳纳米管负载的钴及钴-钌双金属催化剂，并以1-辛烯的氢甲酰化反应为探针，研究了所制催化剂的催化性能；用TEM、XRD、TPR、TG技术对催化剂的形貌、物相结构、还原行为和热稳定性进行了研究。结果表明，金属钌能够促进金属钴在碳纳米管上的均匀担载，并有助于金属钴的还原，降低了催化剂的还原温度。1-辛烯的氢甲酰化反应结果表明，少量钌的加入，可明显提高反应的转化率和C9-醛的选择性；在双金属催化剂中，金属催化剂的粒径更小，分布更均匀，钌的加入对钴金属催化剂有促进作用。     

Highly selective hydrogenation of halonitroaromatics to aromatic haloamines by ligand modified Ni-based catalysts

Ligand modification of Ni-based catalysts by coordination of dicyandiamide to Ni metal leads to enhanced selectivity for the selective hydrogenation of halonitroaromatics.The selectivity of above 99.9%to aromatic haloamines can be achieved at the conversion of 100%.The results of H₂-TPD and FT-IR experiments show that Ni^-H⁺ species possessing the properties of Lewis acid site on the surface of Raney Ni could be responsible for the hydrodehalogenation.When Raney Ni was treated by dicyandiamide,Ni^-H⁺ species interacted with N atom from the dicyandiamide.This interaction was stable even at reaction temperature,which reduced the possibility to form the intermediate state of Ar-Cl...H⁺Ni^-.And then C-Cl bond could not be polarized and activated.The hvdrodechlorination process was suppressed effectively.     

聚苯乙炔/碳纳米管复合材料的导电性能研究

本文以无水A lC l3作催化剂合成聚苯乙炔(PPA),用H2SO4对其进行磺化改性,采用其混法制得了PPA/碳纳米管(CNTs)及磺化PPA/CNTs复合材料,对二者的常温电导率及变温电导率进行了测试。结果表明:磺化PPA的电导率较PPA的提高了3个数量级;随着CMTs含量增加,复合材料的电导率升高;PPA/CNTs导电的阈值是3%,达极限电导率(0.04S/m)所需CNTs含量为25%,而磺化PPA/CNTs导电的阈值是2%,达极限电导率所需CNTs(0.14 s/m)含量为25%。并分析了温度变化对复合材料电阻变化的影响因素。     

Colloidal metal dispersions as catalysts for selective surface hydrogenation of biomembranes, 1. Preparation and characterization of palladium catalysts

Paliadium sols containing largely uniform, nanosize metallic, particles stabilized by poly(N-vinyl-2-pyrrolidone) were found to be active microheterogeneous catalysts for hydrogenation of water soluble olefinic substrates as well as of unsaturated lipid dispersions. The same metallic particles were supported on the surface of crosslinked insoluble poly(N-vinyl-2-pyrrolidone) and served as easily removable macroheterogeneous hydrogenation catalysts.     

A kinetic study of the liquid-phase hydrogenation of phenylpropanal over alumina-supported Ir catalysts

Hydrogenation of phenylpropanal over Ir was investigated under mild conditions. An LH-kinetic model is presented that describes successfully experimental results specially the negative effects of temperature and initial concentrations.