Synthesis and sorption properties of layered hydrous manganese dioxide saturated with <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-metal cations

Layered compounds based on hydrous manganese dioxide (hereafter, Mn-phases) saturated with s-metal (Ba²⁺), p-metal (Pb²⁺), and d-metal (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) cations, analogues of manganese minerals of oceanic ferromanganese formations (vernadite, birnessite, buserite-I, and asbolan), were prepared at 4–6°C. All Mn-phases have poorly ordered structures. The sorption properties of phase compounds were studied in relation to alkali-metal (Na⁺ and K⁺) and other s-, p-, and d-metal cations. The exchange capacities of Mn-phases for alkali cations are very low, within 0.02–0.10 mg-equiv/g; for the other cations, the exchange capacities are 0.13–4.20 mg-equiv/g. The sorption of divalent metal cations depends on the phase and chemical composition of the Mn-phase.     

Theoretical study on the interaction of glutathione with group IA (Li+, Na+, K+), IIA (Be2+, Mg2+, Ca2+), and IIIA (Al3+) metal cations

The structures and energies of complexes obtained upon interaction between glutathione (GSH) and alkali (Li⁺, Na⁺, K⁺), or alkaline earth metal (Be²⁺, Mg²⁺, Ca²⁺), or group IIIA (Al³⁺) cations were studied using quantum chemical density functional theory. The characteristics of the interactions between GSH and the metal cations at different nucleophilic sites of GSH were examined selecting systematically, both mono- and multi-coordinating were taken into account. The results indicated that the heteroatom of GSH, the radius and charge of metal ion, and the coordination number of the metal cation with the ligand played important roles in determining the stability of these complexes. Moreover, the intramolecular hydrogen migration in GSH could be promoted by the metal cations during coordination reaction. Furthermore, the Al³⁺ cation might catalyze the decarboxylation reaction and stimulate the formation of covalent bond between S atom and adjacent O atom of GSH.     

Long-range magnetic ordering in Ba2CoS3: A neutron diffraction study

Neutron powder diffraction has been used to determine the magnetic structure of the quasi-one-dimensional compound Ba₂CoS₃, which contains linear [001] chains of vertex-sharing CoS₄ tetrahedra, spaced apart by Ba²⁺ cations. At 1.5 K the Co²⁺ cations in the chains are antiferromagnetically ordered with an ordered magnetic moment of 1.97(4) μ_B per cation aligned along [100]. Each Co²⁺ cation is ferromagnetically aligned with four cation in neighbouring chains and antiferromagnetically aligned with two others.     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.     

Thermopower composition dependence in ferrospinels

The composition dependence of thermoelectric power (Seebeck coefficient) in ferrospinels with fixed valence foreign cations has been calculated via combined small polaron and cation distribution models. Satisfactory agreement with experimental data is achieved assuming cation distribution thermodynamic constants to be independent of foreign cation concentration. Data are analyzed for a trivalent foreign cation (Al³⁺) at elevated temperature and for divalent foreign cations (Ni²⁺, Mg²⁺, Zn²⁺) at lower temperatures.     

Stability constants for some divalent metal ion/crown ether complexes in methanol determined by polarography and conductometry

Stability constants in methanol at 25.0°C were evaluated for the complexes of the divalent cations Ca²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Mg²⁺, Co²⁺ and Cu²⁺ with the macrocyclic polyethers 15-crown-5 (15C5), 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6) and dibenzo-24-crown-8 (DB24C8). The log K values of the 1:1 complexes were generally in the range 2.1–4.2, which is low in comparison to the values of the corresponding crown ether/alkali metal ion complexes. M₂L complexes were observed for the systems Pb²⁺/18C6, Pb²⁺/DC18C6, Ca²⁺/DC18C6 and Cu²⁺/D18C6, whereas ML₂ complexes were found for Ca²⁺/18C6 and Cu²⁺/18C6. Within the series of complexes studied, there was no clear relationship between cation diameter and hole size.     

Structural Characterization of YMexMn1−xO3 (Me=Cu, Ni, Co) Perovskites

The structural properties of the YMe_xMn_1−xO₃ (Me=Cu, Ni, Co) pseudobinary oxides have been studied by X-ray diffraction and electrical measurements. The powders were prepared by solid state reaction between the corresponding oxides. The incorporation in solid solution of small divalent cations, Cu²⁺, Ni²⁺, and Co²⁺, substituting for Mn in the hexagonal YMnO₃ compound, leads to a phase transition in which a perovskite-type structure is formed. The amount of substituting cation necessary for such a transition depends on the cation nature and, to a small extent, on the ionic radius. The phase transition depends strongly on the progressive substitution of the Jahn-Teller Mn³⁺ cation and therefore of the cooperative Jahn-Teller interaction weakness. The steric influence plays a secondary role, as is shown by the very small variation of the tolerance factor, t, as a function of the cation content. The solid solutions with perovskite-type structure show semiconducting behavior. The conductivity mechanism is of a thermally activated small polaron hopping.     

Interaction of divalent metal cations and nucleotides: A computational study

In this study, the anionic phosphate group of nucleotides was found to be the best site to bind the divalent metal cations Be²⁺, Mg²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ to form the most stable complexes. Molecular orbital calculations at the semiempirical level were performed on nucleotidemetal cation complexes to report energies of complexation reactions, geometrical parameters of complexes and charge distributions on the complexes. In the discussion, complexational preferences of divalent metal cations, the charge transfer involved in the binding of the metal cations to the phosphate anion of the nucleotides and their conformational effects are included.     

How Divalent Cations Interact with the Internal Channel Site of Guanine Quadruplexes

The formation of guanine quadruplexes (GQ) in DNA is crucial in telomere homeostasis and regulation of gene expression. Pollution metals can interfere with these DNA superstructures upon coordination. In this work, we study the affinity of the internal GQ channel site towards alkaline earth metal (Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺), and (post-)transition metal (Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺) cations using density functional theory computations. We find that divalent cations generally bind to the GQ cavity with a higher affinity than conventional monovalent cations (e. g. K⁺). Importantly, we establish the nature of the cation-GQ interaction and highlight the relationship between ionic and nuclear charge, and the electrostatic and covalent interactions. The covalent interaction strength plays an important role in the cation affinity and can be traced back to the relative stabilization of cations’ unoccupied atomic orbitals. Overall, our findings contribute to a deeper understanding of how pollution metals could induce genomic instability.     

Tuning supramolecular G-quadruplexes with mono- and divalent cations

Supramolecular G-quadruplexes (SGQs) are formed via the cation promoted self-assembly of guanine derivatives into stacks of planar hydrogen-bonded tetramers. Here, we present results on the formation of SGQs made from the 8-(m-acetylphenyl)-2′-deoxyguanosine (mAGi) derivative in the presence of various mono- and divalent cations. NMR and HR ESI-MS data indicate that varying the cation can efficiently tune the molecularity, the fidelity and stability (thermal and kinetic) of the resulting SGQs. The results show that, parallel to the previously reported potassium-templated hexadecamer (mAGi₁₆·3K⁺), Na⁺, Rb⁺ and NH₄⁺ also promote the formation of similar supramolecules with high fidelity and molecularity. In contrast, the divalent cations Pb²⁺, Sr²⁺ and Ba²⁺ template the formation of octamers (mAGi₈), with the latter two inducing higher thermal stabilities. Molecular dynamics simulations for the hexadecamers containing monovalent cations enabled critical insights that help explain the experimental observations.     

Ester and Ketone Groups Substituted Mono- and Di- Azo-coupled Azocalix[4]arenes as Extractant for Hg+ and Hg2+, or Cr3+Cations

This article describes extraction properties of mono- (A1–A8) and di- (B1–B8) substituted azocalix[4]arene analogues. The ionophore solvent extractions of alkaline-earth (Sr²⁺), basic metal (Pb²⁺) and transition metal cations (Ag⁺, Hg⁺, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cr³⁺) from aqueous phase to organic phase were carried out by azocalix[4]arene derivatives. It has been observed that they show a good extraction behavior toward selected heavy metal (Hg) and toxic metal (Cr), while A4 and B4 prefer Hg⁺, Hg²⁺ and Cr³⁺ among transition metal cations, respectively. The azocalix[4]arenes (A1–A8) and (B1–B8) are not efficient extractants for all of the selected metal cations, whereas A4 and B4 are selective only for Hg metal cation.     

Interactions between synthetic and indigenous naphthenic acids and divalent cations across oil–water interfaces: effects of addition of oil-soluble non-ionic surfactants

Interactions between naphthenic acids and divalent metal cations across model oil–alkaline water interfaces were investigated by correlating changes in dynamic interfacial tension (IFT), to plausible reaction mechanisms. The measurements were carried out by using a CAM 200 optical instrument, which is based on the pendant drop technique. The naphthenic acids used were synthesised model compounds as well as commercial acid mixtures from crude distillation and extracted acid fractions from a North Sea crude oil. The divalent cations involved Ca²⁺, Mg²⁺, Sr²⁺, and Ba²⁺, which are all common in co-produced formation water and naphthenate deposits. The results show that the dynamic IFT strongly depends on naphthenic acid structure, type of divalent cation, and the concentration of the compounds as well as the pH of the aqueous phase. Introducing divalent cations to systems involving saturated naphthenic acids caused mostly a permanent lowering of the IFT. The decline in IFT is due to electrostatic attraction forces across the interface between the cations in the aqueous phase and the carboxylic-groups at the o/w interface, which cause a higher interfacial density of naphthenic acid monomers. The permanent lowering in IFT is likely due to formation of positively charged monoacid complexes, which possess high interfacial activity. On the other hand, in the case of the aromatic model compounds, the cations affected the IFT differently. This is mainly discussed in light of degree of cation hydration and steric conditions. Various oil-soluble non-ionic surfactant mixtures were also introduced to systems involving a model naphthenic acid and Ca²⁺ in order to investigate how the interfacial competition affected the local interactions. Based on the behaviour of dynamic IFT, probable inhibition mechanisms are discussed.Electronic Supplementary Material Supplementary material is available for this article at     

Electrostatic bonding models: A test on group 1 and 2 metal complexes with H2O,NH3, H2S,PH3, and related ligands

Electrostatic models frequently proposed to describe ion–molecule interactions have been tested on the adducts formed by Group 1 and 2 cations with H₂O, NH₃, H₂S, PH₃, their methyl analogs, and their anions. The results from the model calculations were compared with all-electron calculations (geometry optimized, MP2, TZP basis sets) carried out on adducts formed with Li⁺, Na⁺, K⁺, Ca²⁺, and Mg²⁺. The electrostatic potential model was utilized in two ways: The attraction of the point charge was calculated with and without relaxation of the ligand. A third model allowed relaxation of the ligand but treated the cation as a frozen core. The final model was the crude point charge/point dipole approximation. At long range, the models satisfactorily track the effects on energy of gross changes in the ion–ligand interaction (monovalent versus divalent ions, neutral ligands versus anions, parent ligands versus methyl derivatives), but correlation at close range is poor, especially for binding by divalent cations. The hypothesis that the calculated strength of cation–dipole binding is dependent on calculated dipole moment could not be verified. © 1995 by John Wiley & Sons, Inc.     

Ion-chromatographic separation of metal cations in the presence of a-hydroxyisobutyric acid

Separations of metal cations on a column packed with the strongly acidic cation exchanger Separon SGX CX were investigated in the presence of -hydroxyisobutyric acid (HIBA) in the mobile phase. A retention model based on the general theory of side equilibria was elaborated and relations describing dependences of capacity factors of analytes on the compositon of the mobile phase were derived. Effects of HIBA concentration and pH of the mobile phase on the analyte retention were studied in detail. Stability constants of divalent metal cations (Cd²⁺, Co²⁺, Mn²⁺, Ni²⁺ and Zn²⁺) with HIBA were calculated from the experimental dependences of the reciprocal values of capacity factors on the ligand concentration.     

Qualitative and quantitative 1H NMR spectroscopy for determination of divalent metal cation concentration in model salt solutions,food supplements,and pharmaceutical products by using EDTA as chelating agent

This paper introduces an ¹H NMR method to identify individual divalent metal cations Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Sn²⁺, and Pb²⁺ in aqueous salt solutions through their unique signal shift and coupling after complexation with the salt of ethylenediaminetetraacetic acid (EDTA). Furthermore, quantitative determination applied for the divalent metal cations Ca²⁺, Mg²⁺, Hg²⁺, Sn²⁺, Pb²⁺, and Zn²⁺ (limit of quantification: 5–22 μg/ml) can be achieved using an excess of EDTA with aqueous model salt solutions. An internal standard is not required because a known excess of EDTA is added and the remaining free EDTA can be used to recalculate the quantity of chelated metal cations. The utility of the method is demonstrated for the analysis of divalent cations in some food supplements and in pharmaceutical products.     

Obtention and characterization of a ciclesonide: methyl-beta cyclodextrin complex

Conformationally mobile, di-ionizable 1,2-dimethoxy-p-tert-butylcalix[4]arene ligands are synthesized and compared with 1,3-dimethoxyl analogues to probe the influence of regiochemistry on metal ion extraction efficiency and selectivity. Extraction of hard alkali metal and alkaline earth metal cations, intermediate Pb²⁺, and soft Hg²⁺ from aqueous solutions into chloroform are utilized to evaluate the effect of this structural variation on the ability of the ligands to complex monovalent and divalent metal ion species.     

Heat of adsorption of carbon dioxyde and ethene on zeolites a exchanged with Li+, Ni2+ and Cu2+

Various contents of Li⁺, Ni²⁺ or Cu²⁺ were introduced in zeolite NaA by conventional cation exchange. Crystal damages are observed on samples having suffered the lowerpH. The heat of adsorption of CO₂ and C₂H₄ was determined by isothermal calorimetry. Very high initial heats (100–120 kJ mol^?1) are found in NaA as well as in Li⁺ exchanged samples, perhaps due to chemisorption on alkaline cations; they vanish when Ni²⁺ or Cu²⁺ replaces more than 20% of Na⁺, in like manner with Co²⁺ or ZnI²⁺. For the adsorption of C₂H₄, high initial heats are absent in the case of NaA, but gradually appear when divalent cations are introduced. Apart from these strong initial values, the heats of adsorption present a plateauvs. the adsorbed amount. Abnormal low values at the plateau are indicative of crystal damages.     

On the metal ion selectivity of PNP-lariat ether—an insight from density functional theory calculations

The complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with [N₃P₃R₄O(CH₂CH₂O)₄] (R?=?H(1), NMe₂(2), NC(NMe₂)₂(3)) PNP-lariat ethers were systematically studied in the gas phase by using density functional theory (DFT) B3LYP-D3/6-311+G(3df,2p)//B3LYP/6-31+G(d,p) method. The gas phase cation affinities were calculated to span the wide range between 64.2 and 496.1 kcal mol^?1 in order K⁺?<?Na⁺?<?Li⁺?<?Ca²⁺?<?Mg²⁺?<?Be²⁺. The structural and electronic properties of 1–3 and their complexes were investigated and effects of electron-donor substituents were analyzed. The electron-donor substituents were found to promote the cation affinity. Sidearm coordinative interaction with the crown ether-complexed metal ion has been noticed. The nature of the metal–ligand interactions was investigated using Bader’s Quantum theory of atoms in molecule. It has been found that the Be²⁺–N bonds are partly covalent in nature while other coordinate bonds are of the electrostatic nature. The electron density at the bond critical points was found to be consistent with cation affinity. Natural bond orbital analysis was performed on the optimized geometries. The results showed that the stabilization interaction energies are caused by the donation of O/N lone pair electrons to the LP* orbitals of the metal cations. The amount of charge transfer follows the cation affinity order. The largest charge transfer and associated second-order perturbation stabilization energy were observed for Be²⁺ complexes.

     

Interfacial Behavior of Naphthenic Acids and Multivalent Cations in Systems with Oil and Water. I. A Pendant Drop Study of Interactions Between n‐Dodecyl Benzoic Acid and Divalent Cations

Abstract

Dynamic interfacial tension (IFT) measurements were used to investigate the interactions between a dissociated model naphthenic acid (p‐(n‐dodecyl) benzoic acid) and various divalent metallic cations (Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺) across a toluene/hexadecane–water interface. The measurements were performed by using the pendant drop technique. The results obtained, plotted as IFT vs. time gave curves with similar shapes but different slopes and levels of the equilibrium IFT, depending upon the acid and salt concentrations and the type of cation added. Due to differences in degree of hydration of the various cations, the products of the reaction between dissociated acid monomers and the cations showed differences in solubility, which, in turn, affected the IFT. Based on the shapes of the curves, the mechanisms of the reactions involved in the process are discussed.     

Hydroxide flux synthesis and crystal structure of the ordered palladate, LuNaPd6O8

We report the single crystal structure of LuNaPd₆O₈ grown from a sodium hydroxide flux. The utilization of a hydroxide flux has led to the preparation of the first ordered substitution of a lanthanide metal and an alkali metal on the A-site in a platinum group oxide and the first palladate to contain both a lanthanide metal and an alkali metal. The 1:1 ordered substitution of Lu³⁺ and Na⁺ in place of the commonly observed divalent cation leads to slabs of LuO₈ and NaO₈ cubes bridged together by PdO₄ square planes. The compound crystallizes in the cubic space group Pm-3 (#200) with a=5.72500(10) Å and is structurally related to other cubic palladium oxides.