Surface and transport properties of Au-In liquid alloys

Thermodynamic quantities on Au-In liquid alloys have been used as the input data for the interaction parameter calculations in the framework of the complex formation model (CFM). Once the interaction energies are computed the surface (surface tension and surface composition) and transport properties (chemical diffusion and viscosity) as well as the microscopic functions (concentration fluctuations in the long-wavelength limit and chemical short-range order parameter) have been calculated. The concentration and temperature dependent surface tension values have been compared with our new set of experimental data, obtained by the large drop method in the temperature range of T = 1273-1493 K. The anomalous change of surface tension for some alloy compositions may be attributed to a retention of order in the Au-In melts which is similar to the atomic arrangement in solid Au-In.     

Bulk and surface properties of liquid X-Zr (X=Ag, Cu) compound forming alloys

The phase diagrams of the Ag-Zr and Cu-Zr systems exhibit the existence of different intermetallic compounds in the solid state, and since the structure of a liquid alloy is in some respects similar to that of a crystal, the compound formation phenomenon in these liquid alloy systems has been analysed through the study of surface properties (surface tension and surface composition), dynamic properties (chemical diffusion and viscosity) and microscopic functions (concentration fluctuations in the long-wavelength limit and chemical short-range order parameter) in the frame of the compound formation model (CFM). Moreover, the associative tendency between unlike constituent elements qualitatively expressed by the microscopic functions indicates the glass-forming ability of both systems at higher Zr-concentrations. These results are in agreement with reported experimental data and confirm the applicability of a statistical mechanical theory in conjunction with the CFM to describe the mixing behaviour of compound forming alloys.     

Concentration dependence of thermodynamic,transport and surface properties in Ag–Cu liquid alloys

Thermodynamic, transport and surface properties of Ag–Cu liquid alloys have been investigated on the basis of a simple statistical model. The free energy of mixing, heat of mixing and entropy of mixing have been computed to understand the thermodynamic properties of Ag–Cu alloys in liquid state at 1,423 K. The concentration–concentration fluctuations in the long wavelength limit and the chemical short range order parameter have been determined to comprehend the microscopic and structural information of the alloy. The viscosity and surface tension of the alloy have been evaluated to analyze the transport and surface properties. The theoretical analysis reveals that the energy parameter is temperature dependent, and that Ag–Cu liquid alloy is a weakly interacting-phase separating system.     

Estimation of surface tension for high temperature melts of the binary Ag-X alloys

ABSTRACT

Surface tension is a key property to materials. In this work, the surface tension of the binary alloys Ag-X (Au, Cu, Ce, Bi, Sn, Sb, In, Ni, Y, Pd) is carried out by using Butler Model over enter composition ratio at a certain temperature. According to calculation results, the increasing surface tension of the Ag-X (Cu, Au, Ni, Y, Pd) alloy is accompanied by the composition increases. For Ag-Sn alloy, the surface tension calculated by Butler model is consistent with the experimental result at temperature 1273?K. However, other Ag-X alloys can’t be compared due to the lack of the related experimental data. Although the experimental data about surface tension of the Ag-X alloy are limited, we are possible to make a comparison between the calculated results for the surface tension in this study and the available experimental data. Taken together, the surface tension calculated by Butler model that especially the Ag-Sn alloy are consistent with the experimental results at temperature 1273?K.     

The surface tension of liquid Cu-Fe-Sb alloys

The results of study on the influence of temperature and iron and antimony on the surface tension of liquid ternary Cu-Fe-Sb systems are presented. The measurements were carried out with the sessile drop method, in a broad range of the alloy additions concentration (Fe and Sb). It was demonstrated that the surface tension varies as a linear function of temperature and concentration of iron. It was also demonstrated that antimony, in examined alloys, shows the properties characteristic of a surface-active substance, significantly reducing the surface tension value. The changes of the surface tensions as a function of concentration of antimony were described with the Szyszkowski's equation. Composition of surface layer, enriched with an antimony, was determined basing on the model, which used data regarding properties of binary systems. The surface tension values of Cu-Fe-Sb systems was also computed from model and compared with experimental data. A good agreement was obtained.     

Interfacial segregation in Ag-Au,Au-Pd,and Cu-Ni alloys: I. (100) surfaces

Atomistic simulations of segregation to (100) free surface in Ag–Au, Au–Pd, and Cu–Ni alloy systems have been performed for a wide range of temperatures and compositions within the solid solution region of these alloy phase diagrams. In addition to the surface segregation profiles, surface free energies, enthalpies, and entropies were determined. These simulations were performed within the framework of the free energy simulation method, in which an approximate free energy functional is minimized with respect to atomic coordinates and atomic site occupation. The effects of the relaxation with respect to either the atomic positions or the atomic concentrations are discussed. For all alloy bulk compositions (0.05 C 0.95) and temperatures (400 T(K) 1,100) examined, Ag, Au, and Cu segregates to the surface in the Ag–Au, Au–Pd, and Cu–Ni alloy systems, respectively. The present results are compared with several theories for segregation. The resultant segregation profiles in Au–Pd and Ag–Au alloys are shown to be in good agreement with an empirical segregation theory, while in Cu–Ni alloys the disagreement in Ni-rich alloys is substantial. The width of the segregation profile is limited to approximately three to four atomic planes. The surface thermodynamic properties depend sensitively on the magnitude of the surface segregation, and some of them are shown to vary linearly with the magnitude of the surface segregation.     

Theoretical assessment on mixing properties of liquid Tl–Na alloys

Thermodynamic and structural properties of mixing of molten Tl–Na alloys at 673 K have been investigated using quasi-chemical model. To understand the mixing behaviour in more detail, emphasis is placed on the role of interaction energy term, and viscosity and surface tension of the alloys have also been analysed under statistical considerations. Our study shows negative deviation from the Raoultian behaviour in the properties of Tl–Na alloy thereby indicating hetero-coordination in the Tl–Na melt at 673 K in the full range of concentration. Theoretically, computed thermodynamic data at 673 K agree very well with the corresponding experimental data. The viscosities of the alloys computed from Kaptay equation show small negative deviation and those computed from Singh and Sommer’s formulation show small positive deviation from ideal values while the Budai-Benko-Kaptay equation predicts noticeable negative deviation in Na-rich end and positive deviation in Tl-rich end of the composition. The calculations of surface tension reveal that results obtained from layered structure approach and compound formation model are in good agreement in the Na-rich side and in reasonable agreement in Tl-rich side of the composition, while those computed from Butler equation show noticeable deviations in the intermediate compositions. Both the viscosity and surface tension of liquid Tl–Na alloys increase with addition of Tl-component, viscosity having approximately linear variation with concentration. The study shows that there is non-linear variation in surface composition with bulk concentration and for most of the compositions the surface of the alloy is enriched with Na-atoms which segregate to the surface.     

Thermo-physical properties of ternary Al–Cu–Fe alloy in liquid state

ABSTRACT

The thermodynamic and surface properties of the ternary Al–Cu–Fe alloy in the liquid state have been computed using different models. The thermodynamic properties, such as activity and excess free energy of mixing and the surface properties, such as surface tension have been calculated. The temperature dependence of activity and surface concentration of the components of the ternary Al–Cu–Fe alloy in fixed proportion of any two components have also been calculated. The surface tension of the alloy with respect to the change in temperature in the range 1823–2073?K has also been studied.     

Surface tension and density of liquid Sn-Cu alloys

The surface tension and density of Sn-Cu liquid alloys were measured with the sessile drop method, in a broad range of temperature. Total of seven compositions were investigated in the range from 0.018 to 0.5 mole fraction of Cu. With increasing concentration of Cu, both density and the surface tension are increased. With increasing temperature the density decreases linearly for all of the compositions. The surface tension exhibits similar behavior for most of the compositions, except for the alloy of 0.5 mole fractions of Cu, in which case the increase of the surface tension is observed. The obtained results are compared with existing literature data and Butler model calculations, and a relatively good agreement is observed.     

Surface tension modelling of liquid Cd–Sn–Zn alloys

The thermodynamic model in conjunction with Butler equation and the geometric models were used for the surface tension calculation of Cd–Sn–Zn liquid alloys. Good agreement was found between the experimental data for limiting binaries and model calculations performed with Butler model. In the case of ternary alloys, the surface tension variation with Cd content is better reproduced in the case of alloys lying on vertical sections defined by high Sn to Zn molar fraction ratio. The calculated surface tension is in relatively good agreement with the available experimental data. In addition, the surface segregation of liquid ternary Cd–Sn–Zn and constituent binaries has also been calculated.     

Calculation of the surface tension of liquid Ga-based alloys

As known, Eyring and his collaborators have applied the structure theory to the properties of binary liquid mixtures. In this work, the Eyring model has been extended to calculate the surface tension of liquid Ga–Bi, Ga–Sn and Ga–In binary alloys. It was found that the addition of Sn, In and Bi into Ga leads to significant decrease in the surface tension of the three Ga-based alloy systems, especially for that of Ga–Bi alloys. The calculated surface tension values of these alloys exhibit negative deviation from the corresponding ideal mixing isotherms. Moreover, a comparison between the calculated results and corresponding literature data indicates a good agreement.     

Long-Period Structures in Noble-Metal Alloys: New Aspects

Proceeding from precise calculation of the electronic structure and the generalized electronic susceptibility, a systematic study of the relationship between the nesting properties of the Fermi surface (FS) and the character of long-period ordered superstructures (LPSs) in noble-metal alloys, Cu–Au, Cu–Pd, and Ag–Mg, is performed. An answer is provided as to why in Cu–Au, Cu–Pd, and Cu–Pt alloys so-called incommensurate LPSs, characterized by an irrational period and smeared antiphase boundaries, are formed. The reasons for occurrence of such LPSs within a short temperature range only are clarified. The dependence of the long period M on the long-range order parameter in Cu–Au alloys is accounted for. The causes for formation of two-dimensional LPSs in Au₃Cu and Cu₃Pd alloys are found. It is shown that their stability may be explained for by energy gaps opening on coinciding patches of FS in two mutually perpendicular directions. Arguments are drawn in favor of the fact that among quasicrystalline substances, phases with incommensurate LPSs occupy an intermediate position between incommensurate systems and quasicrystals. An attempt is made to identify the reasons for qualitatively different behavior of LPSs with large and small superperiods. It is shown that the dependence of LPS's behavior on the value of 2M is controlled by the quality of nesting on FS and the nesting vector sensitivity (2k _F) to variations in the long-range order parameter .     

Surface tension estimation of high temperature melts of the binary alloys Ag–Au

Abstract

Surface tension calculation of the binary alloys Ag–Au at the temperature of 1381 K, where Ag and Au have similar electronic structures and their atomic radii are comparable, are carried out in this study using several equations over entire composition range of Au. Apparently, the deviations from ideality of the bulk solutions, such as activities of Ag and Au are small and the maximum excess Gibbs free energy of mixing of the liquid phase is for instance ?4500 J/mol at X_Au = 0.5. Besides, the results obtained in Ag–Au alloys that at a constant temperature the surface tension increases with increasing composition while the surface tension decreases as the temperature increases for entire composition range of Au. Although data about surface tension of the Ag–Au alloy are limited, it was possible to make a comparison for the calculated results for the surface tension in this study with the available experimental data. Taken together, the average standard error analysis that especially the improved Guggenheim model in the other models gives the best agreement along with the experimental results at temperature 1383 K although almost all models are mutually in agreement with the other one.     

Surface properties of liquid In-Zn alloys

The measurements of surface tension and density of zinc, indium and liquid In-Zn alloys containing 0.9, 0.85, 0.75, 0.70, 0.60, 0.40, 0.25 and 0.10 mole fraction of In were carried out using the method of maximum pressure in gaseous bubbles (MBP) as well as dilatometric technique. The technique of sessile drop was additionally applied in the measurements of surface tension for pure indium and zinc. The measurements were performed at temperature range 474-1151 K. The isotherms of surface tension calculated based on Butler's equation at 700 and 1100 K corresponded well with the experimental values for zinc content lower than 0.6 mole fraction. The surface tension calculated for alloys of higher zinc concentrations (0.6 < X_Zn < 0.95) had a positive value of the surface tension temperature coefficient (dσ/dT), which did not coincide with the experimental results. The density as well as molar volume of liquid In-Zn alloys showed almost identical behaviour like the ideal solutions. The observed little deviations were contained within assessed experimental errors.     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Effect of Grain Boundary Segregation and Migration on Diffusion Profiles: Analysis and Experiments

In many experimental studies, curved penetration profiles are observed for grain boundary diffusion performed in the B kinetics regime in contrast to the shape expected from the solutions of the second Fick's equation. To explain these curvatures the effects of grain boundary structure, grain boundary migration, and grain boundary segregation have been successively proposed in the literature. Using previous data for Cu–Ag and Cu–Ni and new ones on Cu–Fe and Cu–Zn systems we will show how it is possible to separate all these possible contributions and how, knowing the true origin of the curvature, one can deduce much quantitative information impossible (or very difficult) to obtain by other techniques.     

Thermodynamics and surface properties of liquid Al–Ga and Al–Ge alloys

The surface properties of Al–Ga and Al–Ge liquid alloys have been theoretically investigated at a temperature of 1100 K and 1220 K respectively. For the Al–Ga system, the quasi chemical model for regular alloy and a model for phase segregating alloy systems were applied, while for the Al–Ge system the quasi chemical model for regular and compound forming binary alloys were applied. In the case of Al–Ga, the models for the regular alloys and that for the phase segregating alloys produced the same value of order energy and same values of thermodynamic and surface properties, while for the Al–Ge system, the model for the regular alloy reproduced better the thermodynamic properties of the alloy. The model for the compound forming systems showed a qualitative trend with the measured values of the thermodynamic properties of the Al–Ge alloy and suggests the presence of a weak complex of the form Al₂Ge₃. The surface concentrations for the alloys show that Ga manifests some level of surface segregation in Al–Ga liquid alloy while the surface concentration of Ge in Al–Ge liquid alloy showed a near Roultian behavior below 0.8 atomic fraction of Ge.     

Interfacial segregation in Ag-Au,Au-Pd,and Cu-Ni alloys: II. [001] Σ5 twist grain boundaries

Atomistic simulations of segregation to [001] 5 twist boundaries in Cu–Ni, Au–Pd, and Ag–Au alloy systems have been performed for a wide range of temperatures and compositions within the solid solution region of these alloy phase diagrams. In addition to the grain boundary segregation profiles, grain boundary free energies, enthalpies, and entropies were determined. These simulations were performed within the framework of the free energy simulation method, in which an approximate free energy functional is minimized with respect to atomic coordinates and atomic site occupation. For all alloy bulk compositions (0.05 C 0.95) and temperatures (400 T (K) 1,100) examined, Cu and Au segregates to the boundary in the Cu–Ni and Au–Pd alloy systems, respectively; although in the Ag–Au alloys, the majority element segregates to the boundary. The width of the segregation profile is limited to approximately three to four (002) atomic planes. The classical theories for the segregation, and the effects of the relaxation with respect to either the atomic positions or the atomic concentrations, are discussed. The boundary thermodynamic properties depend sensitively on the magnitude of the boundary segregation, and some of them are shown to vary linearly with the magnitude of the grain boundary segregation.     

Surface tension of liquid Cu-Ti binary alloys measured by electromagnetic levitation and thermodynamic modelling

The surface tension of liquid Cu-Ti alloys has been measured by using the containerless technique of electromagnetic levitation and theoretically calculated in the framework of the compound formation model. Measurements have been carried out on alloys covering the entire range of composition and over the temperature range 1275-2050 K. For all investigated alloys the surface tension can be described by a linear function of the temperature with negative slope.Due to the presence of different intermetallic compounds in the solid state the surface properties of liquid Cu-Ti alloys are satisfactory described by the compound formation model.     

Prediction of thermodynamic and surface properties of Pb−Hg liquid alloys at different temperatures

The thermodynamic properties, such as free energy of mixing, heat of mixing, activity and structural properties, such as concentration fluctuation in long wavelength limit, short-range order parameter of Pb–Hg liquid alloy at 600 K have been calculated using theoretical modelling. It has then been correlated with modified Butler model to compute the surface tension of the alloys at different temperatures. The Pb–Hg system at 600 K is found to be ordering at higher concentration of Pb.