Molecular and crystal structure of 4,5,4′,5′-tetrahydro-2,2′-(1,4-phenylene)bisoxazoline

4,5,4,5-Tetrahydro-2,2-(1,4-phenylene)bisoxazoline, which is one of the most promising stabilizers-consolidators of heterochain polymers, was studied by X-ray structural analysis.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2506–2507, October, 1996.     

Blends of poly(∈-caprolactone) with cellulose alkyl esters: effect of the alkyl side-chain length and degree of substitu tion on miscibility

Cellulose alkyl esters, CELL- OCOCnH2n+1(n = 1 6), were synthesized by a homogeneous reaction of cotton cellulose with different acyl chlorides in N,N-dimethylacetamide--lithium chloride solution. The miscibility of the esterified celluloses with poly(-caprolactone) (PCL) was investigated, mainly through thermal analysis by differential scanning calorimetry (DSC). A polymer pair, cellulose butyrate (CB)/PCL, showed the highest miscibility of all the binary blends examined here; this is usual when relatively high-substituted esters (DS 2.0) are used as the respective component. The butyl ester derivatives with DS 1.5 showed poor miscibility with PCL     

Optical,mechanical, and thermal behavior of poly(vinyl alcohol) composite films embedded with biosafe and optically active poly(amide–imide)-ZnO quantum dot nanocomposite as a novel reinforcement

Poly(vinyl alcohol) (PVA), a polyhydroxy polymer, is the synthetic resin produced in the world due to the physical properties and complete biodegradability. This work tries to introduce novel reinforcement for PVA to improve properties without effect on its biocompatibility. The present investigation deals with the fabrication of new PVA/poly(amide–imide)-zinc oxide nanocomposites (PVA/PAI–ZnO NCs) with different PAI–ZnO loading by using ultrasound irradiation. At first, the surface of ZnO nanoparticles (NPs) was modified by biosafe diacid for the better dispersion of NPs and increasing possible interactions between NPs and PAI. Then, PAI–ZnO was used as filler in the PVA matrix. Surface morphology results were amazing. The TEM images and related histograms show a noticeable size decreasing of ZnO NPs from about 31 to 3 nm after preparation of NCs. Other analyses showed that the reinforcement of PAI–ZnO NC into the PVA matrix enhances mechanical and thermal properties of the PVA composites.     

Synthesis, molecular structure and intramolecular aromatic-ring stacking interaction of a novel binuclear Cu(Ⅱ) complex with 1, 10-phenanthroline and phenylacetate

The complex [Cu(phen)2(POAc)3]ClO·4H2O has been synthesized and investigated by elemental analysis, IR spec-troscopy and X-ray diffraction methods, where phen = 1,10-phenanthroline, POAc = phenylacetate group). The complex crystallizes in the triclinic space group PI with two molecules in a unit cell of dimensions a = 1.0579(2) nm, b = 1.2423(3) nm, c = 1.9190(4) nm, α = 71.84(1)°, β = 80.50(2)°, γ = 88.60(1)°, V = 2.3625(9) nm3, R = 0.0407 and Rw = 0.0656. The complex results from bridging of two Cu(phen)2 units by three carboxylate groups, and each Cu2 ion is in a distorted square pyramidal geometry with two nitrogen atoms of phen and three carboxylate oxygen atoms of POAc. It has been showed that intramolecular stacking interactions occur between the phenyl moieties of POAc and aromatic rings of phen, leading to a novel molecule structure with two coordinating modes of carboxylate ligands, of which two phenylacetates are μ2-carboxylate-O-bridging ligands, and the other is a μ2-carboxylate-     

Thermal degradation of bromine-containing polymers: Part 11—Blends of poly(2,3-dibromopropyl methacrylate) and poly(2,3-dibromopropyl acrylate) with poly(methyl methacrylate) and poly(methyl acrylate)

The products of degradation of blends of poly(2,3-dibromopropyl methacrylate) and poly(2,3-dibromopropyl acrylate) with poly(methyl methacrylate) and poly(methyl acrylate) are predominantly those to be expected from the degradation of the individual polymers. However, the appearance of methyl bromide and methanol from all four blends indicates that some interaction does occur across the phase boundary between the two constituent polymers. This is presumed to consist of the reaction of hydrogen bromide, formed by decomposition of the brominated polymers with the methyl groups of the acrylate and methacrylate polymers.     

Synthesis and structure of N,N′-bis(dihexylphosphorylmethyl)-1,4-diaminobutane

Russian Journal of General Chemistry - N,N′-Bis(dihexylphosphorylmethyl)-1,4-diaminobutane has been obtained via the Kabachnik–Fields reaction. Crystal structure of its salt with nitric...     

Synthesis and investigation of poly(p-phenylenediamine)–poly(1,4-benzoquinonediimine-<Emphasis Type="Italic">N,N</Emphasis>-diyl-1,4-phenylene)

Poly(1,4-benzoquinonediimine-N,N-diyl-1,4-phenylene) having similar structure to pernigraniline was synthesized by chemical oxidative polymerization of p-phenylenediamine and its salt using potassium peroxydisulfate as an oxidant in molar ratio 1:0.8, in acetic acid, at 278 K. Acetylation of amino end groups of polymers were carried out aiming to prevent self-condensation of amino groups with 1,4-benzoquinone diimine groups by 1,4-addition. Attempting to carry out the reduction of obtained polymer with hydrazine hydrate, it was shown that 1,4-addition of hydrazine to quinonediimine groups occurs instead of expected reduction reaction. When doping obtained polymers with iodine, the electrical conductivity increases up to 10^?4 S/cm.     

Synthesis and properties of poly(amide–imide)s containing a N-methylcarbazole group

A new dicarboxylic acid monomer containing the N-methylcarbazole and imide structures, 3,6-bis(trimellitimido)-N-methylcarbazole (I), was prepared from the condensation of 3,6-diamino-N-methylcarbazole (c) and trimellitic anhydride. The diamine c was synthesized in three steps starting from the methylation of carbazole, followed by nitration and catalytic hydrazine reduction. A series of N-methylcarbazole-containing poly(amide–imide)s were synthesized by direct polycondensation from the diimide–diacid I with various aromatic diamines. These poly(amide–imide)s had inherent viscosities of 0.66–1.47 dl/g and were readily soluble in a variety of organic solvents, including N-methyl-2-pyrrolidone and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films of these polymers could be cast from DMAc solutions, and these films exhibited excellent mechanical strength. The glass-transition temperatures of these poly(amide–imide)s were in the range 317–362 °C. All the poly (amide–imide) did not degrade noticeably below 480 °C in nitrogen, and the 10% weight loss temperatures and char yields at 800 °C were above 520 °C and 60% in nitrogen, respectively, indicating high thermal stability. Received: 8 February 2000/Accepted: 23 March 2000     

Crystal structure,interaction with DNA,and bovine serum albumin of the cobalt(II) complex of demethylcantharate and 2,2′-bipyridine

A new cobalt(II) complex [Co(DCA)(bipy)(H₂O)] (DCA?=?demethylcantharate, 7-oxabicyclo[2.2.1]heptane-2,3-dicarboxylate, C₈H₈O₅; bipy?=?2,2′-bipyridine, C₁₀H₈N₂) was synthesized from cobalt acetate, demethylcantharidin, and bipy. This complex was characterized by elemental analysis, molar conductance, infrared spectra, and X-ray single-crystal diffraction. It crystallized in orthorhombic crystal system and Pbca space group. The DNA binding of the complex was investigated by electronic absorption spectra and viscosity measurements. The complex binds to DNA via partial intercalation with binding constant K _b of 4.02?×?10⁴?L?M^?1. The complex could quench the intrinsic fluorescence of bovine serum albumin through static quenching. The binding constant K _A was 7.28?×?10⁶?L?M^?1 and binding site was one.     

Liquid crystal polymers—22: Synthesis and properties of monomers for the preparation of poly(2-alkyl-1,4-phenylene terephthalates)

A series of n- and iso-alkylhydroquinone and diacetate monomers was synthesized at high purity for the preparation of a series of high molecular weight aromatic polyesters of the type: poly(2-alkyl-1,4-phenylene terephthalates). The reductive alkylation of benzoquinone with the appropriate trialkylborane was selected for the synthesis of the substituted hydroquinones.     

Preparation and structure of poly(4,4′-oxydiphenylene)pyromellitimide asymmetric ultrafiltration membranes

A process was developed for preparing asymmetric ultrafiltration poly(4,4′-oxydiphenylene)pyromel litimide membranes, involving wet forming of the membranes from the prepolymer, followed by catalytic solidphase thermal transformation of the prepolymer into the polyimide. The influence exerted on the structure and characteristics of the membranes by the compositions of the forming solution and precipitation bath, and also by thermal imidization conditions was examined. The optimal conditions were determined for preparing asymmetric ultrafiltration poly(4,4′-oxydiphenylene)pyromellitimide membranes exhibiting the water permeability coefficient of (10−500) × 10⁻⁶ m³ m⁻² s⁻¹ atm⁻¹ and molecular weight cut-off in the range (5−100) × 10³ g mol⁻¹.     

Synthesis and characterization of trimethoxysilyl-functionalized poly(phthalazinone ether ketone)

A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone)(PPEK)was prepared for the boundary lubricant application in micro-electro-mechanical system(MEMS).The synthesis of functionalized PPEK was started from the hydro- xylation of PPEK,then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane(GPTMS). The structures of the functional PPEK were confirmed by FTIR,~1H NMR,~(29)Si NMR,and UV-vis spectrum.     

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Aromatic polyimides are distinguished for their excellent mechanical and thermal properties in many engineering fields1. However, aromatic polyimides are normally insoluble in common organic solvents, which restricts their applications in some fields. Many efforts have been taken to improve their solubility. Introducing bulky side groups and non-coplanar structure into polymers bone chains is a good way to obtain the polymers with excellent mechanical and thermal properties2. In this paper…     

Synthesis and structure of (O → Si)-chelate fluorosilane,a novel complex of pentacoordinate silicon with N-acetylvaline

A novel organosilicon complex of N-acetylvaline was synthesized by the reaction of the relative disiloxane derivative with BF3 etherate. According to X-ray and NMR data, the silicon atom of the final product is pentacoordinated in both the solid state and solution. The coordination state of silicon was correctly predicted by quantum-chemical calculations.     

Photoconducting and photodielectric properties of heterostructures based on poly-n-epoxypropylcarbazole and poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene] doped with zinc octabutylphthalocyanine

We have studied the photoconducting and photodielectric properties of heterostructures based on poly-N-epoxypropylcarbazole and poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene] doped with zinc 2,3,9,10,16,17,23,24-octabutylphthalocyanine located between SnO₂ :In₂O₃ and Ag electrical contacts, in the absorption region of the metal complex. We have observed that the photosensitivity is higher when the poly-N-epoxypropylcarbazole films are deposited on a SnO₂ :In₂O₃ electrode. The increased photosensitivity of the heterostructures compared with monolayers of the films is explained by the high efficiency of dissociation of the photogenerated electron–hole pairs and the decrease in the effect of traps for nonequilibrium charge carriers at the film interfaces.     

Coordination compounds of copper and nickel with N,N′-[4,4′-(perfluoro-1,4-phenylene)bis(oxy)bis(4,1-phenylene)]-bis[2-(pyridin-2-ylmethylidene)hydrazinecarbothioamide] and its derivatives

N,N′-[4,4′-(Perfluoro-1,4-phenylene)bis(oxy)bis(4,1-phenylene)]bis[2-(pyridin-2-ylmethylidene)-hydrazinecarbothioamide] as well as its methyl and phenyl derivatives react with copper and nickel chlorides in ethanol to form coordination compounds. In the products, the hydrazinecarbothioamides act as doubly deprotonated bridging ligands. The prepared complexes have been found to inhibit in vitro the growth and propagation of the myeloid human leukemia HL-60 cancer cells at the 10^?5–10^?7 mol/L concentration.     

Fabrication of a novel poly(dimethylsiloxane) microchips with two sharpened stretching tips

An integrated poly(dimethylsiloxane) (PDMS) microchip with two sharpened stretching has been presented. The sample was directly introduced into the separation channel through the stretching inlet tip without complicated power switching supplies and without injection cross-channel. Operations of running buffer refreshing or channel cleaning also becomes simple by vacuumed in one end and placed another tip into solution vial. The fabrication method can be easily applied in most analytical laboratories at low cost in the absence of soft lithography and plasma bonding equipments. Characteristics of the chips were tested and it can be used to separate fluorescence labeled molecules.     

Synthesis, crystal structure, and luminescence properties of the tetranuclear complex of cadmium(II) acetate with 4,4′-(1,4-phenylenediisopropylidene)bis-aniline

The complex compound [CdL_1.25(CH₃CO₂)₂(H₂O)], where L = NH₂-C₆H₄-C(CH₃)₂-C₆H₄-C(CH₃)₂-C₆H₄-NH₂ was synthesized and its crystal structure was determined. The crystals are triclinic, space group P $ \bar 1 $ , a = 10.160(1) ?,b = 17.442(1) ?, c = 20.232(1) ?, ?? = 67.93(1)°, ?? = 87.22(1)°, ?? = 77.65(1)°, V = 3340.2(4) ?³, ??_calc = 1.392 g/cm³, Z = 4. The structure contains two crystallographically non-equivalent Cd²⁺ ions, each coordinating two nitrogen atoms of two ligands L, four oxygen atoms of two bidentate acetate groups, and one water molecule. The coordination polyhedron of Cd²⁺ ions is anirregular sevenvertex polyhedron. The interaction of cadmium with ligands L gives rise to centrosymmetric tetranuclear complexes [Cd₄L₅].     

Synthesis,characterization, and interaction with DNA of Cu(II) and Zn(II) complexes with 2,2′-bipyridyl-6,6′-dicarboxylic acid

Two transition metal complexes, [Cu₂(bpdc)₂H₂O]·2H₂O (1) and Zn(bpdc)(H₂O)₂ (2) (H₂bpdc?=?2,2′-bipyridine-6,6′-dicarboxylic acid), were synthesized and characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Complex 1 is dinuclear with two five-coordinate cupric ions and 2 is mononuclear with one six-coordinate zinc. Interactions of 1 and 2 with DNA have been investigated using UV–Vis absorption spectra. The cleavage reaction on DNA has been monitored by agarose gel electrophoresis.