共查询到20条相似文献,搜索用时 78 毫秒
1.
A hetero-trimetallic lanthanide-substituted bismuth titanate (BLT, where lanthanide is praseodymium) with stoichiometry Pr(0.75)Bi(3.25) Ti(3)O(12) has been obtained as both highly homogenized crystalline and amorphous thin films using three different BLT precursors: (i). precursor A-(Pr(OC(3)H(7)(i))(3),Bi(OOCCH(3))(3),Ti(OC(3)H(7)(i))(4)); (ii). precursor B-(Pr(OC(3)H(7)(i))(2)(acac),Bi(OOCCH(3))(3),Ti(OC(3)H(7)(i))(3)(acac)); and (iii). precursor C-(Pr(OC(3)H(7)(i))(2)(acac),Bi(OOCCH(3))(3),Ti(OC(3)H(7)(i))(2)(acac))(2). These three BLT precursors (A, B, C) are prepared by reacting constituent monometallic precursors in the desired stoichiometry and by employing controlled acidic hydrolysis via the sol-gel method. Paramagnetic Pr(III), being a f(2) ion, gives characteristic 4f-4f transition bands (3H(4)-->3P(2), 3H(4)-->3P(1), 3H(4)-->3P(0), and 3H(4)-->1D(2)) in the visible region, the intensities of which have been found to be highly sensitive to even minor changes in the immediate coordination around Pr(III), occurring as a result of the progress of polycondensation reactions of three multicomponent BLT sols. We have used the changes with time in the intensities (represented by oscillator strengths of these four 4f-4f bands) and the magnitude and variation of the spectral parameters evaluated from the observed spectra with a view toward monitoring the sol-gel reactions of BLT precursors A, B, and C. 4f-4f transition spectra of the aliquots, withdrawn from the hydrolyzing A, B, and C sols at different time intervals, represent the changes occurring in the Pr(III) environment with the progress of sol-gel hydrolysis of BLT, and are used to investigate the kinetic performance in hydrolysis of the three precursors. Kinetics of hydrolysis of precursors A, B, and C indicate that all four f-f transition bands of Pr are almost equally sensitive to precursor hydrolysis in the order A>B>C. 相似文献
2.
Bimetallic alkoxides of praseodymium and neodymium with aluminum, viz., M[Al(OC(3)H(i)(7))(4)](3), where M = Pr(III)/Nd(III), have been used as catalysts in Meerwein-Ponndorf-Verley (MPV) reduction of 2-octanone and benzophenone in isopropanol to give their corresponding secondary alcohols. The reduction of ketones is investigated by following the absorption spectra involving 4f-4f transitions. During the MPV reduction the oscillator strengths (P) and the Judd-Ofelt intensity (T(lambda), lambda = 2,4,6) parameters corresponding to each 4f-4f band (H43-->D21, H43-->P03, H43-->P13, and H43-->P23 in praseodymium, and I9/24-->F3/24, I9/24-->F5/24, I9/24-->F7/24, I9/24-->G5/24, and I9/24-->G7/24 in neodymium alkoxides) at different time intervals have also been calculated and used in the determination of rates. Rates were calculated in terms of complexation of ketone and isopropanol with M[Al(OC(3)H(i)(7))(4)](3) during the MPV reaction, from the changes in both absorbance and oscillator strength with time, and were found to be comparable, verifying the Judd-Ofelt theory. The stronger oxyphilicity of Pr(III) and Nd(III) in M[Al(OC(3)H(i)(7))(4)](3) than of their analogue Al(III) in Al(OC(3)H(i)(7))(3) made the bimetallic alkoxides better catalyst in MPV reduction of ketones. 相似文献
3.
The reactions between triphenylbismuth, salicylic acid, and the metal alkoxides M(OCH(2)CH(3))(5) (M = Nb, Ta) or Ti[OCH(CH(3))(2)](4) have been investigated under different reaction conditions and in different stoichiometries. Six novel heterobimetallic bismuth alkoxy-carboxylate complexes have been synthesized in good yield as crystalline solids. These include Bi(2)M(2)(sal)(4)(Hsal)(4)(OR)(4) (M = Nb, Ta; R = CH(2)CH(3), CH(CH(3))(2)), Bi(2)Ti(3)(sal)(8)(Hsal)(2), and Bi(2)Ti(4)(O(i)Pr)(sal)(10)(Hsal) (sal = O(2)CC(6)H(4)-2-O; Hsal = O(2)CC(6)H(4)-2-OH). The complexes have been characterized spectroscopically and by single-crystal X-ray diffraction. Compounds of the group V transition metals contain metal ratios appropriate for precursors of ferroelectric materials. The molecules exhibit excellent solubility in common organic solvents and good stability against unwanted hydrolysis. The nature of the thermal decomposition of the complexes has been explored by thermogravimetric analysis and powder X-ray diffraction. We have shown that the complexes are converted to the corresponding oxide by heating in an oxygen atmosphere at 500 degrees C. The mass loss of the complexes, as indicated by thermogravimetric analysis, and the resulting unit cell parameters of the oxides are consistent with the formation of the desired heterobimetallic oxide. The complexes decomposed to form the bismuth-rich phases Bi(4)Ti(3)O(12) and Bi(5)Nb(3)O(15) as well as the expected oxides BiMO(4) (M = Nb, Ta) and Bi(2)Ti(4)O(11). 相似文献
4.
Kirillov E Lavanant L Thomas C Roisnel T Chi Y Carpentier JF 《Chemistry (Weinheim an der Bergstrasse, Germany)》2007,13(3):923-935
New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79). 相似文献
5.
A series of similarly structured Group 4 alkoxides was used to explore the cation effect on the final ceramic nanomaterials generated under different pH solvothermal (SOLVO) conditions. The synthesis of [Ti(μ-ONep)(ONep)(3)](2) (1, ONep = OCH(2)C(CH(3))(3)) and {[H][(μ-ONep)(3)M(2)(ONep)(5)(OBu(t))]} where M = Zr (2) and Hf (3, OBu(t) = OC(CH(3))(3)) were realized from the reaction of M(OBu(t))(4) (M = Ti, Zr, Hf) and H-ONep. Crystallization of 1 from py led to the isolation of [Ti(μ-ONep)(ONep)(3)](2)(μ-py) (1a) whereas the dissolution of 2 or 3 in py yielded {(μ(3)-O)(μ(3)-OBu(t))[(μ-ONep)M(ONep)(2)](3)} M = Zr (2a) and Hf (3a). The structurally similar congener set of 1-3 was used to investigate variations of their resultant nanomaterials under solvothermal conditions at high (10 M KOH), low (conc. (aq) HI), and neutral (H(2)O) pH conditions. Reproducible nanodots, -squares, and -rods of varied aspect ratios were isolated based on cation and the reaction pH. The hydrolysis products were reasoned to be the "seed" nucleation sites in these processes, and studying the hydrolysis behavior of 1-3 led to the identification of [Ti(6)(μ(3)-O)(7)(μ-O)(μ-ONep)(2)(ONep)(6)](2) (1b) for 1 but yielded 2a and 3a for 2 and 3, respectively. A correlation was found to exist between these products and the final nanomaterials formed for the acidic and neutral processes. The basic route appears to be further influenced by another property, possibly associated with the solubility of the final nanoceramic material. 相似文献
6.
The synthesis of Group IV metal complexes that contain a tetradentate dianionic [OSSO]-carborane ligand [(HOC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2 (B(10)H(10))] (1a) is described. Reactions of TiCl(4) and Ti(OiPr)(4) with the [OSSO]-type ligand 1a afford six-coordinated titanium complex [Ti(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2)] (2a) and four-coordinated titanium complex [Ti(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))(OiPr)(2)] (2b), respectively. ZrCl(4) and HfCl(4) were treated with 1a to give six-coordinated zirconium complex [Zr(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2) (thf)(2)] (2c) and six-coordinated hafnium complex [Hf(OC(6)H(2)tBu(2)-4,6)(2)(CH(2))(2)S(2)C(2)(B(10)H(10))Cl(2)] (2d). All the complexes were fully characterized by IR, NMR spectroscopy, and elemental analysis. In addition, X-ray structure analyses were performed on complexes 2a and 2b and reveal the expected different coordination geometry due to steric hindrance effects. Extended X-ray absorption fine structure (EXAFS) spectroscopy was performed on complexes 2c and 2d to describe the coordination chemistry of this ligand around Zr and Hf. Six-coordinated titanium complex 2a showed good activity toward ethylene polymerization as well as toward copolymerization of ethylene with 1-hexene in the presence of methylaluminoxane (MAO) as cocatalyst (up to 1060 kg[mol(Ti)](-1) h(-1) in the case of 10 atm of ethylene pressure). 相似文献
7.
Kar S Chanda N Mobin SM Datta A Urbanos FA Puranik VG Jimenez-Aparicio R Lahiri GK 《Inorganic chemistry》2004,43(16):4911-4920
Paramagnetic diruthenium(III) complexes (acac)(2)Ru(III)(mu-OC(2)H(5))(2)Ru(III)(acac)(2) (6) and [(acac)(2)Ru(III)(mu-L)Ru(III)(acac)(2)](ClO(4))(2), [7](ClO(4))(2), were obtained via the reaction of binucleating bridging ligand, N,N,N',N'-tetra(2-pyridyl)-1,4-phenylenediamine [(NC(5)H(4))(2)-N-C(6)H(4)-N-(NC(5)H(4))(2), L] with the monomeric metal precursor unit (acac)(2)Ru(II)(CH(3)CN)(2) in ethanol under aerobic conditions. However, the reaction of L with the metal fragment Ru(II)(bpy)(2)(EtOH)(2)(2+) resulted in the corresponding [(bpy)(2)Ru(II) (mu-L) Ru(II)(bpy)(2)](ClO(4))(4), [8](ClO(4))(4). Crystal structures of L and 6 show that, in each case, the asymmetric unit consists of two independent half-molecules. The Ru-Ru distances in the two crystallographically independent molecules (F and G) of 6 are found to be 2.6448(8) and 2.6515(8) A, respectively. Variable-temperature magnetic studies suggest that the ruthenium(III) centers in 6 and [7](ClO(4))(2) are very weakly antiferromagnetically coupled, having J = -0.45 and -0.63 cm(-)(1), respectively. The g value calculated for 6 by using the van Vleck equation turned out to be only 1.11, whereas for [7](ClO(4))(2), the g value is 2.4, as expected for paramagnetic Ru(III) complexes. The paramagnetic complexes 6 and [7](2+) exhibit rhombic EPR spectra at 77 K in CHCl(3) (g(1) = 2.420, g(2) = 2.192, g(3) = 1.710 for 6 and g(1) = 2.385, g(2) = 2.177, g(3) = 1.753 for [7](2+)). This indicates that 6 must have an intermolecular magnetic interaction, in fact, an antiferromagnetic interaction, along at least one of the crystal axes. This conclusion was supported by ZINDO/1-level calculations. The complexes 6, [7](2+), and [8](4+) display closely spaced Ru(III)/Ru(II) couples with 70, 110, and 80 mV separations in potentials between the successive couples, respectively, implying weak intermetallic electrochemical coupling in their mixed-valent states. The electrochemical stability of the Ru(II) state follows the order: [7](2+) < 6 < [8](4+). The bipyridine derivative [8](4+) exhibits a strong luminescence [quantum yield (phi) = 0.18] at 600 nm in EtOH/MeOH (4:1) glass (at 77 K), with an estimated excited-state lifetime of approximately 10 micros. 相似文献
8.
A series of bis(aryl) bismuth compounds containing (N,C,N)-pincer ligands, [2,6-(Me(2)NCH(2))(2)C(6)H(3)](-) (Ar'), have been synthesized and structurally characterized to compare the coordination chemistry of Bi(3+) with similarly sized lanthanide ions, Ln(3+). Treatment of Ar'(2)BiCl, 1, with ClMg(CH(2)CH═CH(2)) affords the allyl complex Ar'(2)Bi(η(1)-CH(2)CH═CH(2)), 2, in which only one allyl carbon atom coordinates to bismuth. Complex 1 reacts with KO(t)Bu and KOC(6)H(3)Me(2)-2,6 to yield the alkoxide Ar'(2)Bi(O(t)Bu), 3, and aryloxide Ar'(2)Bi(OC(6)H(3)Me(2)-2,6), 4, respectively, but the analogous reaction with the larger KOC(6)H(3)(t)Bu(2)-2,6 forms [Ar'(2)Bi][OC(6)H(3)(t)Bu(2)-2,6], 6, in which the aryloxide ligand acts as an outer sphere anion. Chloride is removed from 1 by NaBPh(4) to form [Ar'(2)Bi][BPh(4)], 5, which crystallizes from THF in an unsolvated form with tetraphenylborate as an outer sphere counteranion. 相似文献
9.
Syntheses and properties of group-4 complexes incorporating the tridentate, dianionic ligand N,N-(dipyrrolyl-alpha-methyl)-N-methylamine, dpma, have been investigated. Addition of 1 equiv of H(2)dpma to Ti(NMe(2))(4) and Zr(NMe(2))(4) results in transamination with 2 dimethylamides providing Ti(NMe(2))(2)(dpma) and Zr(NMe(2))(2)(NHMe(2))(dpma), respectively. Addition of 2 equiv of H(2)dpma to Zr(NMe(2))(4) and Hf(NMe(2))(4) results in production of the homoleptic complexes Zr(dpma)(2) and Hf(dpma)(2). Conversely, treatment of Ti(NMe(2))(4) with 2 equiv of H(2)dpma does not provide Ti(dpma)(2), which was available by addition of 2 Li(2)dpma to TiCl(4). The properties of the isostructural series M(dpma)(2) were investigated by single crystal X-ray diffraction, cyclic voltammetry, (14)N NMR, and other techniques. By (14)N NMR, it was found that the pyrrolyl resonance chemical shift changes approximately linearly with the electronegativity of the metal center, which was attributed to pi-interaction between the pyrrolyl nitrogen lone pair and the metal. Other complexes produced during this study include Ti(CH(2)SiMe(3))(NMe(2))(dpma), TiCl(2)(THF)(dpma), and Ti(OCH(2)CF(3))(2)(THF)(dpma). Two isomers for Ti(CH(2)SiMe(3))(NMe(2))(dpma) were isolated and characterized. 相似文献
10.
Palard I Schappacher M Belloncle B Soum A Guillaume SM 《Chemistry (Weinheim an der Bergstrasse, Germany)》2007,13(5):1511-1521
Poly(trimethylene carbonate) (PTMC) was synthesized through ring-opening polymerization by using a rare-earth borohydride initiator, [Sm(BH(4))(3)(thf)(3)]. This initiator shows a high activity to give high-molar-mass PTMCs with molar-mass distributions ranging from 1.2 to 1.4, and with a regular structure void of ether linkages. The polymers were characterized by (1)H and (13)C NMR spectroscopy, (1)H-(1)H COSY, (1)H-(13)C HMQC NMR spectroscopy, size-exclusion chromatography (SEC), viscosimetry, and MALDI-TOF MS analyses. A coordination-insertion mechanism was established based on detailed NMR characterizations, especially of the polymer chain end-functions. The monomer initially coordinates the samarium to give [Sm(BH(4))(3)(tmc)(3)], 1. The monomer then opens up through cleavage of the cyclic ester oxygen--acyl bond and inserts into the Sm--HBH(3) bond resulting in an alkoxide complex, [Sm{O(CH(2))(3)OC(O)HBH(3)}(3)], 2, or [Sm{O(CH(2))(3)OC(O)H}(3)], 2', which then propagates the polymerization of TMC to give the active polymer [Sm({O(CH(2))(3)OC(O)}(n)O(CH(2))(3)OC(O)HBH(3))(3)], 3 or [Sm(O(CH(2))(3)OC(O){O(CH(2))(3)OC(O)}(n)O(CH(2))(3)OC(O)H)(3)], 3'. Finally, acidic hydrolysis of 3 or 3' gives HO(CH(2))(3)OC(O)[O(CH(2))(3)OC(O)](n)O(CH(2))(3)OC(O)H, 4. This novel alpha-hydroxy,omega-formatetelechelic PTMC represents the first example of a formate-terminated polycarbonate. TMC and epsilon-caprolactone (CL) were copolymerized to afford both random PTMC-co-PCL and block PTMC-b-PCL copolymers that were characterized by (1)H NMR spectroscopy, SEC, and differential scanning calorimetry (DSC). The structure of the block copolymers depends on the order of addition of monomers: if CL is introduced first, dihydroxytelechelic HO-PTMC-b-PCL-OH polymers are formed, whereas introduction of TMC first or simultaneous addition of comonomers leads to hydroxyformatetelechelic HC(O)O-PTMC-b-PCL-OH analogues. 相似文献
11.
Boyle TJ Segall JM Alam TM Rodriguez MA Santana JM 《Journal of the American Chemical Society》2002,124(24):6904-6913
The chemical interconversions observed for a novel family of trihydroxymethyl ethane (THME-H(3)) ligated Sn(II) compounds have been determined using single-crystal X-ray and (119)Sn NMR experiments. (mu-THME)(2)Sn(3) (1) was isolated from the reaction of 3 equiv of [Sn(NR(2))(2)](2) (R = SiMe(3)) with 4 equiv of THME as a unique trinuclear species capped above and below the plane of Sn atoms by two THME ligands. Upon reaction with "Sn(NR(2))(2)", compound 1 rearranged to yield another novel molecule [(mu-THME)Sn(2)(NR(2))](2) (2). Compound 2 could also be formed directly from the stoichiometric mixture of THME-H(3) and [Sn(NR(2))(2)](2). Further studies revealed that 1 would also rearrange in the presence of Sn(OR)(2) to form [(mu-THME)Sn(2)(mu-OR)](2) [OR = OMe (3), OCH(2)Me (4), OCH(2)CH(Me)CH(2)CH(3) (5), OCH(2)CMe(3) (6, ONep), OC(6)H(5) (7, not structurally characterized), OC(6)H(4)Me-3 (8), OC(6)H(4)Me-2 (9), OC(6)H(3)(Me)(2)-2,6 (10), OC(6)H(3)(CHMe(2))(2)-2,6 (11). Additionally, 3-11 could by synthesized from the reaction of 2 and the appropriate H-OR. (119)Sn solution NMR studies of 2-11, in THF-d(8), indicate that an equilibrium between the parent complex and its disassociation products (1 and the free parent Sn alkoxy or amide precursor) exists at room temperature. This is a likely reason behind the ease of interconversion observed for 1. The generality of this exchange was further verified through the reaction of 1 with [Ti(mu-ONep)(ONep)(3)](2), which led to the isolation of (mu-ONep)(2)Sn(3)(mu-THME)(2)Ti(ONep)(2) (12). For 12, the solid-state structure was maintained in solution with no indication of an equilibrium. 相似文献
12.
Dubberley SR Friedrich A Willman DA Mountford P Radius U 《Chemistry (Weinheim an der Bergstrasse, Germany)》2003,9(15):3634-3654
New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented. 相似文献
13.
Bismuth(III) compounds containing the Kl?ui's oxygen tripodal ligand [CpCo{P(O)(OEt)(2)}(3)](-) (L(OEt)(-)) have been synthesized, and their interactions with dichromate in aqueous media were studied. The treatment of Bi(5)O(OH)(9)(NO(3))(4) with NaL(OEt) in water afforded [L(OEt)Bi(NO(3))(2)](2) (1), whereas that of BiCl(3) with NaL(OEt) in CH(2)Cl(2) yielded L(OEt)BiCl(2) (2). Chloride abstraction of 2 with AgX afforded [L(OEt)BiX(2)](2) [X(-) = triflate (OTf(-)) (3), tosylate (OTs(-)) (4)]. In aqueous solutions at pH > 4, 4 underwent ligand redistribution to give the bis(tripod) complex [(L(OEt))(2)Bi(H(2)O)][OTs] (5). The treatment of 4 with Na(2)Cr(2)O(7) in acetone/water afforded the Bi(III)/Cr(VI) oxo cluster [(L(OEt))(4)Bi(4)(μ(3)-CrO(4))(2)(μ(3)-Cr(2)O(7))(2)] (6) containing a unique Bi(4)Cr(4)O(12) oxometallic core. Compound 6 oxidized benzyl alcohol to give ca. 6 equiv of benzaldehyde. The reaction between 2 and CrO(3) yielded [L(OEt)Bi(OCrO(2)Cl)](2)(μ-Cl)(2) (7). The crystal structures of complexes 4-7 have been determined. 相似文献
14.
H Choujaa AL Johnson G Kociok-Köhn KC Molloy 《Dalton transactions (Cambridge, England : 2003)》2012,41(37):11393-11401
The tungsten aminoalkoxides W(O)(OPr(i))(3)L [L = dmae, OCH(2)CH(2)NMe(2) (1); bdmap, OCH(CH(2)NMe(2))(2) (2); tdmap, OC(CH(2)NMe(2))(3) (3)] have been synthesised. Controlled hydrolysis of 1-3 has allowed isolation of W(4)O(4)(μ-O)(6)(dmae)(4) (4), W(4)O(4)(μ-O)(4)(OPr(i))(4)(bdmap)(4) (5), W(6)O(6)(μ-O)(9)(tdmap)(6) (6), W(4)O(4)(μ-O)(6)(tdmap)(4) (7), W(4)O(4)(μ-O)(6)(tdmap)(4)·4H(2)O (7a), all of which have been characterised by X-ray crystallography. 4, 7, 7a each embody a W(4)O(6) core with adamantane structure, 5 incorporates a folded W(4)O(4) square and 6 has a trigonal prismatic W(6)O(9) at its heart. 7 decomposes in air at to give orthorhombic WO(3), while 1-3 decomposed under an autogenerated pressure (Reaction under Autogenic Pressure at Elevated Temperatures, RAPET) to form mixtures of carbon-coated WO(x) needles and carbon spherules. 相似文献
15.
Hollingsworth N Kanna M Kociok-Köhn G Molloy KC Wongnawa S 《Dalton transactions (Cambridge, England : 2003)》2008,(5):631-641
Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C. 相似文献
16.
Sarazin Y Howard RH Hughes DL Humphrey SM Bochmann M 《Dalton transactions (Cambridge, England : 2003)》2006,(2):340-350
The reactions of the bulky amino-bis(phenol) ligand Me(2)NCH(2)CH(2)N[CH(2)-3,5-Bu(t)(2)-C(6)H(2)OH-2](2)(1-H(2)) with Zn[N(SiMe(3))(2)](2)(4), [Mg[N(SiMe(3))(2)](2)](2)(5) and Ca[N(SiMe(3))(2)](2)(THF)(2)(6) yield the complexes 1-Zn, 1-Mg and 1-Ca in good yields. The X-ray structure of 1-Ca showed the complex to be dimeric, with calcium in a distorted octahedral coordination geometry. Five of the positions are occupied by an N(2)O(3) donor set, while the sixth is taken up by an intramolecular close contact to an o-Bu(t) substituent, a rare case of a Ca...H-C agostic interaction (Ca...H distances of 2.37 and 2.41 Angstroms). Another sterically hindered calcium complex, Ca[2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)O](2)(THF)(2).(C(7)H(8))(2/3)(7), was prepared by reaction of 6 with the iminophenol 2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)OH (3-H). According to the crystal structure 7 is monomeric and octahedral, with trans THF ligands. The complex Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2)(2-Ti) was prepared by treatment of Ti(OPr(i)(4)) with the new amino-bis(phenol) Me(2)NCH(2)CH(2)N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)OH-2](2)(2-H(2)). The reduction of 2-Ti with sodium amalgam gave the titanium(III) salt Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2).Na(THF)(2)(8). A comparison of the X-ray structures of 2-Ti and 8 showed that the additional electron in 8 significantly reduced the intensity of the pi-bonding from the oxygen atoms of the isopropoxide groups to titanium. 1-Ca and 8 were active initiators for the ring-opening polymerisation of epsilon-caprolactone (up to 97% conversion of 200 equivalents in 2 hours) and yielded polymers with narrow molecular weight distributions. 相似文献
17.
The reaction of manganese(II) salts with organophosphonic acid [t-BuPO(3)H(2) or cyclopentyl phosphonic acid (C(5)H(9)PO(3)H(2))] in the presence of ancillary nitrogen ligands [1,10-phenanthroline (phen) or 2,6-bis(pyrazol-3-yl)pyridine (dpzpy)], afforded, depending on the stoichiometry of the reactants and the reaction conditions, dinuclear, trinuclear, and tetranuclear compounds, [Mn(2)(t-BuPO(3)H)(4)(phen)(2)]·2DMF (1), [Mn(3)(C(5)H(9)PO(3))(2)(phen)(6)](ClO(4))(2)·7CH(3)OH (2), [Mn(3)(t-BuPO(3))(2)(dpzpy)(3)](ClO(4))(2)·H(2)O (3), [Mn(4)(t-BuPO(3))(2)(t-BuPO(3)H)(2)(phen)(6)(H(2)O)(2)](ClO(4))(2) (4), and [Mn(4)(C(5)H(9)PO(3))(2)(phen)(8)(H(2)O)(2)](ClO(4))(4) (5). Magnetic studies on 1, 2, and 4 reveal that the phosphonate bridges mediate weak antiferromagnetic interactions between the Mn(II) ions have also been carried out. 相似文献
18.
A new selection method for atomic layer deposition (ALD) or chemical vapor deposition (CVD) precursors is proposed and tested. Density functional theory was used to simulate Sr and Ba precursors, and several precursors were selected and used to grow films via ALD as test cases for the precursor selection method. The precursors studied were M(x)2 (M = Sr, Ba; x = tetramethylheptanedionate (tmhd), acetylacetonate (acac), hexafluoroacetylacetonate (hfac), cyclopentadienyl (H(5)C(5)), pentamethylcyclopentadienyl (Me(5)C(5)), n-propyltetramethylcyclopentadienyl (PrMe(4)C(5)), tris(isopropylcyclopentadienyl) (Pr(3)(i)H(2)C(5)), tris(isopropylcyclopentadienyl)(THF) (Pr(3)(i)H(2)C(5))(OC(4)H(8)), tris(isopropylcyclopentadienyl)(THF)2 (Pr(3)(i)H(2)C(5))(OC(4)H(8))2, tris(tert-butylcyclopentadienyl) (Bu(3)(t)H(2)C(5)), tris(tert-butylcyclopentadienyl)(THF) (Bu(3)(t)H(2)C(5))(OC(4)H(8)), heptafluoro-2,2-dimethyl-3,5-octanedionate (fod)). The energy required to break bonds between the metal atom and the ligands was calculated to find which precursors react most readily. In the case of tmhd and Cp precursors, the energy required to break bonds in the precursor ligand was studied to evaluate the most likely mechanism of carbon incorporation into the film. Trends for Ba and Sr followed each other closely, reflecting the similar chemistry among alkaline earth metals. The diketonate precursors have stronger bonds to the metals than the Cp precursors, but weaker bonds within the ligand, explaining the carbon contamination found in experimentally grown films. Atomic layer deposition of SrO was tested with Sr(tmhd)2 and Sr(PrMe(4)Cp)2 and oxygen, ozone, and water as oxygen sources. No deposition was measured with tmhd precursors, and SrO films were deposited with PrMe(4)Cp with a source temperature of 200 degrees C and at substrate temperatures between 250 and 350 degrees C with growth rates increasing for oxygen sources in this order: O2 < H2O < O2 + H2O. The experimental results support the predictions based upon calculations: PrMe(4)Cp and Me(5)Cp precursors are expected to be the best precursors among those studied for Ba and Sr film growth. 相似文献
19.
Jura M Levason W Petts E Reid G Webster M Zhang W 《Dalton transactions (Cambridge, England : 2003)》2010,39(42):10264-10271
The first soft donor adducts of TiF(4), [TiF(4)(diphosphine)] (diphosphine = o-C(6)H(4)(PMe(2))(2), R(2)P(CH(2))(2)PR(2), R = Me or Et) have been prepared from [TiF(4)(MeCN)(2)] and the diphosphines in rigorously anhydrous CH(2)Cl(2), as extremely moisture sensitive yellow solids, and characterised by multinuclear NMR ((1)H, (31)P, (19)F), IR and UV/vis spectroscopy. The crystal structure of [TiF(4){Et(2)P(CH(2))(2)PEt(2)}] has been determined and shows a distorted six-coordinate geometry with disparate Ti-F(transF) and Ti-F(transP) distances and long Ti-P bonds. Weaker soft donor ligands including Ph(3)P, Ph(2)P(CH(2))(2)PPh(2), o-C(6)H(4)(PPh(2))(2), Ph(2)As(CH(2))(2)AsPh(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr do not form stable complexes with TiF(4), although surprisingly, fluorotitanate(IV) salts of the previously unknown doubly protonated ligand cations [LH(2)][Ti(4)F(18)] (L = o-C(6)H(4)(PPh(2))(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr) are formed in some cases as minor by-products. The structure of [o-C(6)H(4)(PPh(2)H)(2)][Ti(4)F(18)] shows the first authenticated example of a diprotonated o-phenylene-diphosphine. The synthesis and full spectroscopic characterisation are reported for a range of TiF(4) adducts with hard N- or O-donor ligands for comparison purposes, along with crystal structures of [TiF(4)(thf)(2)], [TiF(4)(Ph(3)EO)(2)]·2CH(2)Cl(2) (E = P or As), and [TiF(4)(bipy)]. 相似文献
20.
Westerheide L Müller FK Than R Krebs B Dietrich J Schindler S 《Inorganic chemistry》2001,40(8):1951-1961
The iron(III) complexes [Fe(2)(HPTB)(mu-OH)(NO(3))(2)](NO(3))(2).CH(3)OH.2H(2)O (1), [Fe(2)(HPTB)(mu-OCH(3))(NO(3))(2)](NO(3))(2).4.5CH(3)OH (2), [Fe(2)(HPTB)(mu-OH)(OBz)(2)](ClO(4))(2).4.5H(2)O (3), [Fe(2)(N-EtOH-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3CH(3)OH.1.5H(2)O (4), [Fe(2)(5,6-Me(2)-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3.5CH(3)OH.C(2)H(5)OC(2)H(5).0.5H(2)O (5), and [Fe(4)(HPTB)(2)(mu-F)(2)(OH)(4)](ClO(4))(4).CH(3)CN.C(2)H(5)OC(2)H(5).H(2)O (6) were synthesized (HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, N-EtOH-HPTB = N,N,N',N'-tetrakis(N' '-(2-hydroxoethyl)-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, 5,6-Me(2)-HPTB = N,N,N',N'-tetrakis(5,6-dimethyl-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane). The molecular structures of 2-6 were established by single-crystal X-ray crystallography. Iron(II) complexes with ligands similar to the dinucleating ligands described herein have been used previously as model compounds for the dioxygen uptake at the active sites of non-heme iron enzymes. The same metastable (mu-peroxo)diiron(III) adducts were observed during these studies. They can be prepared by adding hydrogen peroxide to the iron(III) compounds 1-6. Using stopped-flow techniques these reactions were kinetically investigated in different solvents and a mechanism was postulated. 相似文献