Highly efficient metal-free growth of nitrogen-doped single-walled carbon nanotubes on plasma-etched substrates for oxygen reduction

We have for the first time developed a simple plasma-etching technology to effectively generate metal-free particle catalysts for efficient metal-free growth of undoped and/or nitrogen-doped single-walled carbon nanotubes (CNTs). Compared with undoped CNTs, the newly produced metal-free nitrogen-containing CNTs were demonstrated to show relatively good electrocatalytic activity and long-term stability toward oxygen reduction reaction (ORR) in an acidic medium. Owing to the highly generic nature of the plasma etching technique, the methodology developed in this study can be applied to many other substrates for efficient growth of metal-free CNTs for various applications, ranging from energy related to electronic and to biomedical systems.     

Cobalt nanoparticles embedded in nitrogen-doped carbon nanotubes for efficient catalysis of oxygen reduction reaction

Journal of the Iranian Chemical Society - The oxygen reduction reaction (ORR) is a key process to limit the property of the metal-air batteries. In this paper, cobalt nanoparticles embedded in...     

Pre-fixing defects in carbon framework for revealing the active sites of oxygen reduction reaction at nitrogen-doped carbon nanotubes

Nitrogen-doped carbon-based materials are promising non-platinum group metal electrocatalysts for the oxygen reduction reaction (ORR).Understanding their ORR ac...     

基于氮掺杂碳载铁复合物的锌空电池氧阴极催化剂

迫在眉睫的环境和能源问题推动人类探索可行、可靠和可再生的能源技术.锌-空气电池和氢氧燃料电池等器件显示出高能量转换效率,但是仍有许多难题有待克服,例如阴极侧上缓慢的氧还原反应(ORR),以及高昂的成本极大地限制了铂基催化剂在商业上的广泛应用.因此,开发高性能的廉价ORR催化剂具有重要意义.过渡金属碳氮化合物(M-N-C, M=Co, Fe等)成为最有希望替代铂基催化剂的一类材料, M-N-C催化剂可以通过直接热解含有过渡金属、氮和碳物种的前驱体合成.然而热解时金属原子易团聚,多孔结构不能被有效地控制,导致相对较差的催化活性.目前, MOF衍生的催化剂在能源转化和储存技术中得到了广泛的关注,其具有丰富的氮含量、高比表面积和可调的孔道结构等特点.本文报道了一种简便可靠可控的合成铁氮共掺杂碳十二面体纳米结构催化剂的方法,并作为阴极电催化剂用于锌空气电池中,测试结果证实,合成的铁氮共掺杂的纳米碳具有与铂基材料相当的活性和更加优异的稳定性.表面吸附了的邻菲罗啉铁的ZIF-8在碳化过程中,氮基团能够结合铁形成Fe Nx结构单元,因此可得到铁氮共掺杂的电催化剂.粉末X射线衍射,扫描电镜证实ZIF-8的成功合成.经过热解得到的催化剂中Fe Nx或Fe Cx衍射峰较弱,表明样品中铁含量较低,存在部分无定型铁.通过拉曼光谱分析发现,引入的邻菲罗啉在热解过程中诱导了缺陷的形成,所以Fe-NCDNA-0的ID/IG比值明显高于NC.同时ID/IG随着铁含量的增加而减少,这是因为铁可以诱导石墨化,诱导效应随着铁含量的增加而增加.分析氮气吸附-脱附等温线得出,引入邻菲罗啉之后,比表面积增加;而铁的引入因其占据了微孔结构,导致比表面积下降.同时电镜证实Fe-NCDNA-2具有较大的形貌扭曲,使得该材料具有较大的比表面积.系统的电化学研究表明,氮掺杂有利于增强ORR活性,在引入铁之后形成高效的活性中心会进一步提高催化性能.因此, Fe-NCDNA-2在碱性条件下表现出优异的ORR性能.线性扫描伏安法曲线表明,铁氮共掺杂的材料表现出与Pt/C相似的性能,其中Fe-NCDNA-2的半波电位(E1/2)为0.863 V,比商业Pt/C的电位更正(E1/2=0.841 V).同时, Fe-NCDNA-2具有更加优异的稳定性,测试30000 s后的电流保持率为80%(Pt/C:64%).在中性介质中,合成的材料也展示了较高的ORR活性.Fe-NCDNA-2的E1/2=0.715 V,催化30000 s后电流保持率77%,均优于商业Pt/C催化剂.组装的锌空气电池进一步验证其作为氧还原催化剂实际应用的可行性.相比于以Pt/C为催化剂做空气阴极的电池,以Fe-NCDNA-2组装的电池表现出更高的开路电压,更高的功率密度(184 m Wcm^-2),以及更加优异的充放电循环稳定性.该工作也有利于启发研究人员探索类似的氮掺杂过渡金属碳材料在各种催化上的应用.     

Determination of dissolved oxygen by catalytic reduction on Nafion-methyl viologen chemically modified electrode

A small size Nafion-methyl viologen chemically modified electrode (Nafion-MV CME) together with a small size electrolytic cell were constructed for the purpose of dissolved oxygen (DO) determination. The catalytic reduction of DO on Nafion-MV CME results in fast and sensitive DO determination. The mechanism of such detection is also considered.     

Synergistic assembly of dendrimer-templated platinum catalysts on nitrogen-doped carbon nanotube electrodes for oxygen reduction

A study of the synergistic tuning of nitrogen-doped carbon nanotubes (NCNTs) as support- and size-monodisperse platinum nanoparticles templated from G4-NH2 dendrimers (Pt-DEN's) as catalysts targeted toward oxygen reduction is reported. UV-vis spectroscopy, adsorption isotherms, TGA, TEM, and voltammetry were used to characterize the loading and activity of Pt-DENs immobilized on CNT and NCNT supports. The facile uptake of Pt-DENs was found to be influenced by the number of edge plane sites on the NCNT support with higher adsorption rates observed for NCNTs with increased nitrogen content. Pt-DEN/NCNT composites exhibit high activity with a mass-transport-limited current density and mass activity of 2.3 mA cm(-2) and 0.05 mA g(-1), respectively, for the oxygen reduction reaction (ORR).     

Fluorination of multiwall nitrogen-doped carbon nanotubes

A film of oriented nitrogen-doped multiwall carbon nanotubes was grown on a silicon substrate as a result of the thermolysis of an acetonitrile + ferrocene mixture. The fluorination of the film by BrF₃ vapor at room temperature removed the substrate; however, the vertical orientation of the nanotubes was not destroyed. Analysis of micrographs of a fluorinated sample obtained with a high-resolution transmission electron micro-scope showed that only the surface walls of the nanotubes were fluorinated. The fluorine concentration of the product as determined from X-ray photoelectron spectroscopy was about 16%. A comparison of the N1s spectra of the starting and fluorinated samples showed that the nitrogen atoms of CN_x nanotubes changed their electronic state as a result of fluorination. Matching of the X-ray photoelectron spectroscopic data with the results of quantum-chemical calculations for fragments of fluorinated nitrogen-doped nanotubes showed that fluorine atoms preferred to attach to pyridine-like nitrogen atoms or to carbon atoms in the ortho or meta positions relative to a nitrogen atom.     

Potential dependent and structural selectivity of the oxygen reduction reaction on nitrogen-doped carbon nanotubes: a density functional theory study

Nitrogen-doped carbon nanotubes (NCNTs) are attractive for electrocatalytic applications in fuel cells due to their low cost and high electrocatalytic activity. By using density functional theory calculations, the electrocatalytic mechanisms of the oxygen reduction reaction (ORR) under electrochemical conditions are studied at graphite-like N groups (N(G)) and pyridine-like N groups (N(P)) of NCNTs, in which the effect of electrode potentials on the activation energy (E(a)) and reaction energy (E(r)) is taken into account. The ORR occurs at both N(G) and N(P) defect sites via two different four-electron OOH and two-electron H(2)O(2) mechanisms. At the lower potential region, both mechanisms are simultaneously responsible for the reaction at N(G) and N(P) defect sites; while at higher potentials, the four-electron mechanism becomes dominant and the ORR at N(P) defect sites is more energetically favorable than that at N(G) defect sites.     

Electrocatalytic reduction of coreactant by highly loaded dendrimer-encapsulated palladium nanoparticles for sensitive electrochemiluminescent immunoassay

Dendrimer-encapsulated palladium nanoparticles anchored on a carbon nanohorn were designed as a nonenzymatic tracing tag for sensitive quantum dot-based electrochemiluminescent immunoassay by electrocatalytic reduction of dissolved O(2) as the coreactant.     

A facile approach for constructing nitrogen-doped carbon layers over carbon nanotube surface for oxygen reduction reaction

Fabricating nitrogen-doped carbon layers over the conductive substrate is a cost-effective and efficient approach to develop practical oxygen reduction reaction (ORR) catalyst. In the current work, relying on the commercially available carbon nanotube (CNT), nitrogen-doped carbon layers over CNT is constructed by annealing the in situ formed complex over the CNT surface derived from iron ion inducing diaminonaphthalene (DAN) polymerization and DAN self-polymerization. Physical and electrochemical characterizations are carefully conducted to comparatively analyze the structure and activity relationship. The significance of iron in constructing nitrogen-doped carbon layers and tuning active sites of N types over multiwall carbon nanotube for ORR is demonstrated by X-ray photoelectron spectroscopy and Raman scattering spectrum. The excellent performance of nitrogen-doped carbon layers over CNT (catalyzed by iron) towards ORR is displayed by rotating ring-disk electrode. Specifically, the onset potential, half-wave potential, and limiting current density are 0.961 V, 0.831 V, and 5.20 mA cm^?2 respectively, very close to the state-of-the-art commercial Pt/C catalyst. Both high surface area and efficient N active sites should be considered in the nitrogen-doped carbon materials design and fabrication for ORR. Considering the large-scale availability, it has significant value in fuel cells commercial applications.     

Fe-N-modified multi-walled carbon nanotubes for oxygen reduction reaction in acid

We report a facile synthesis of Fe-N-C catalysts based on the surface functionalization of multi-walled carbon nanotubes (MWCNTs), which show high activity and stability for oxygen reduction reaction (ORR) in acid. Fe-N-MWCNT catalysts, whose ORR mass activities could vary by 3-4 times depending on the choice of Fe precursors, were found to have considerably higher ORR mass activity and higher stability than N-modified MWCNTs (N-MWCNTs). The Fe-N-MWCNT catalyst with a dominant Fe-N(x) moiety (with x ≈ 4) and a surface Fe/C ratio of ～0.004 exhibits the highest ORR mass activity in acid (～0.7 mA mg(-1)(Fe-N-MWCNT) at 0.8 V vs. RHE), where the lower mass activity of other Fe-N-MWCNT catalysts can be attributed to lower Fe/C ratios and Fe-N(x) moieties (with x smaller than 4) as revealed from X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS) spectroscopy. Moreover, the enhanced stability of Fe-N-MWCNTs in comparison to N-MWCNTs can be attributed to less H(2)O(2) production during ORR as determined from rotating ring disk electrode (RRDE) measurements, and higher activity for H(2)O(2) electro-reduction by rotating disk electrode (RDE) measurements. The large surface Fe/C ratio and Fe-N(x) moiety corresponding to high ORR activity and stability of Fe-N-MWCNTs demonstrate that surface functionalization can be very helpful to graft active catalytic sites onto carbon nanostructures, and to provide insights into the ORR mechanism of non-noble metal catalysts (NNMCs) for proton exchange membrane fuel cells (PEMFCs).     

Self-supported bimodal-pore structured nitrogen-doped carbon fiber aerogel as electrocatalyst for oxygen reduction reaction

Self-supported 3-dimensional (3D) nitrogen-doped bimodal-pore structured carbon fiber aerogel is synthesized via a facile carbonization process using prawn shells as the raw material. The fabricated N-doped carbon fiber aerogel possesses micro- and meso-porous pores with an N doping level of 5.9% and a high surface area of 526 m² g^− 1. As an electrocatalyst, the resultant N-doped carbon fiber aerogel exhibits superior electrocatalytic activity towards oxygen reduction reaction (ORR) with a more positive ORR onset-potential, better stability and high resistance to crossover effect compared to the commercial Pt/C electrocatalyst.     

Synthesis of highly nitrogen-doped multi-walled carbon nanotubes

We present a new synthesis route for nitrogen doped carbon nanotubes (CNx) based on the aerosol method. Tubes with a record high concentration of nitrogen (approximately 20 atom%) have been synthesized, confirmed by electron energy loss spectroscopy (EELS). A strong correlation between the N/C ratio and morphology of the tubes is observed and discussed.     

Polyelectrolyte functionalized carbon nanotubes as efficient metal-free electrocatalysts for oxygen reduction

Having a strong electron-withdrawing ability, poly(diallyldimethylammonium chloride) (PDDA) was used to create net positive charge for carbon atoms in the nanotube carbon plane via intermolecular charge transfer. The resultant PDDA functionalized/adsorbed carbon nanotubes (CNTs), either in an aligned or nonaligned form, were demonstrated to act as metal-free catalysts for oxygen reduction reaction (ORR) in fuel cells with similar performance as Pt catalysts. The adsorption-induced intermolecular charge-transfer should provide a general approach to various carbon-based efficient metal-free ORR catalysts for oxygen reduction in fuel cells, and even new catalytic materials for applications beyond fuel cells.     

Signal amplification of streptavidin-horseradish peroxidase functionalized carbon nanotubes for amperometric detection of attomolar DNA

A novel biosensing strategy for selective electrochemical detection of DNA down to the attomolar level with a linear range of 5 orders of magnitude was developed by the specific recognitions of target DNA and streptavidin to biotin labelled molecular beacon and signal amplification of streptavidin-horseradish peroxidase functionalized carbon nanotubes.     

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.     

Gold nanoparticles/carbon nanotubes composite microspheres for catalytic reduction of 4-nitrophenol

The layer-by-layer assembly of polyethyleneimine and carbon nanotubes is carried out through the electrostatic interactions on colloidal polystyrene templates. The successful spherical growth of polyethyleneimine/carbon nanotube multilayers could be investigated by SEM. The subsequent in situ preparation and deposition of gold nanoparticles on the core–shell composites could yield novel microsphere complexes, which are characterized by SEM, TEM, EDX and XRD. The functional hierarchical microspheres with gold nanoparticles exhibit good catalytic activity in the reaction of reducing 4-nitrophenol to 4-aminophenol.     

Co-and N-doped carbon nanotubes with hierarchical pores derived from metal-organic nanotubes for oxygen reduction reaction

Biomolecules with a broad range of structure and heteroatom-containing groups offer a great opportunity for rational design of promising electrocatalysts via versatile chemistry.In this study,uniform folic acid-Co nanotubes(FA-Co NTs) were hydrothermally prepared as sacrificial templates for highly porous Co and N co-doped carbon nanotubes(Co-N/CNTs) with well-controlled size and morphology.The formation mechanism of FA-Co NTs was investigated and FA-Co-hydrazine coordination interaction together with the H-bond interaction between FA molecules was characterized to be the driving force for growth of one-dimensional nanotubes.Such distinct metal-ligand interaction afforded the resultant CNTs rich Co-N_x sites,hierarchically porous structure and Co nanoparticle-embedded conductive network,thus an overall good electrocatalytic activity for oxygen reduction.Electrochemical tests showed that Co-N/CNTs-900 promoted an efficient 4 e ORR process with an onset potential of 0.908 V vs.RHE,a limiting current density of 5.66 mA cm^-2 at 0.6 V and a H_2 O_2 yield lower than 5%,comparable to that of 20%Pt/C catalyst.Moreover,the catalyst revealed very high stability upon continuous operation and remarkable tolerance to methanol.