Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

3,3′‐Bi(1,2,4‐oxadiazoles) Featuring the Fluorodinitromethyl and Trinitromethyl Groups

Here we report on the preparation of two hydrogen atom free 3,3′‐bi(1,2,4‐oxadiazole) derivatives. 5,5′‐Bis(fluorodinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole) was synthesised by fluorination of diammonium 5,5′‐bis(dinitromethanide)‐3,3′‐bi(1,2,4‐oxadiazole). For our previously reported analogue 5,5′‐bis(trinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole), a new synthetic route starting from new 3,3′‐bi(1,2,4‐oxadiazolyl)‐5,5′‐diacetic acid was developed. In this course also hitherto unknown 5,5′‐dimethyl‐3,3′‐bi(1,2,4‐oxadiazole) was isolated. The compounds were characterised by multinuclear NMR spectroscopy, IR and Raman spectroscopy, elemental analysis as well as mass spectrometry. X‐ray diffraction studies were performed and the crystal structures for the 5,5'‐dimethyl and 5,5'‐(fluorodinitromethyl) derivatives are reported. The energetic 5,5'‐(fluorodinitromethyl) and 5,5'‐(trinitromethyl) compounds do not contain any hydrogen atoms and show remarkable high densities. Furthermore, the thermal stabilities and sensitivities were determined by differential scanning calorimetry (DSC) and standardised impact and friction tests. The heats of formation were calculated by the atomisation method based on CBS‐4M enthalpies. With these values and the room‐temperature X‐ray densities, several detonation and propulsion parameters, such as the detonation velocity and pressure as well as the specific impulse of mixtures with aluminium, were computed using the EXPLO5 code.     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Syntheses and Promising Properties of Dense Energetic 5,5′‐Dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole and Its Salts

A planar energetic molecule with high density, 5,5′‐dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole ( 4 ), was obtained by the nitration of 5,5′‐diamino‐3,3′‐azo‐1,2,4‐oxadiazole using 100 % nitric acid. In addition, selected nitrogen‐rich salts were prepared. Of them, the neutral compound 4 and its hydroxylammonium salt, 6 , were further confirmed by single‐crystal X‐ray diffraction. Physicochemical and energetic properties including density, thermal stability, and sensitivity were investigated. The energetic performance from the calculated heats of formation and experimental densities indicates that many of them have potential applications as energetic materials.     

Synthesis,Crystal Structure,and Properties of Energetic Complex Magnesium 5,5′‐Dinitramino‐3,3′‐bi[1,2,4‐triazolate] Hexahydrate

Alkaline Earth metal (Mg) energetic complex with 5,5′‐dinitramino‐3,3′‐bi[1,2,4‐triazolate] dihydrate (DNABT) has been synthesized and structurally characterized by FTIR spectroscopy, elemental analysis, and single X‐ray diffraction. The thermal decomposition processes of the complex and DNABT were studied by means of the TDA‐TG technologies. Sensitivity tests reveal that the complex is more insensitive to mechanical stimuli than DNABT. Combustion behavior shows that 1 has good color performances.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Synthesis,Crystal Structure,and Thermal Behavior of a Novel Insensitive Energetic Cocrystal Composed of 3,3′‐Bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐Amino‐1,2,4‐triazole

A novel insensitive energetic cocrystal consisting of 3,3′‐bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐amino‐1,2,4‐triazole in a 1:2 molar ratio was prepared and characterized. The structure of this cocrystal was characterized by single‐crystal X‐ray diffraction. The crystal structure of the cocrystal is a monoclinic system with P1 space group. Properties of the cocrystal studied included thermal decomposition and detonation performance. This cocrystal has a crystal density of 1.689 g · cm^–3 at 173 K and good detonation performance (D = 6940 m · s^–1, P = 20.9 GPa). Moreover, measured impact and friction sensitivities (IS > 40 J, FS > 360 N) show that it can be classified as an insensitive energetic material. Its thermodynamic properties indicate that it has moderate thermal stability with a sharp exothermic peak (244 °C, 5 K · min^–1) and a high critical temperature of thermal explosion (523 K). In view of the observations above, it may serve as a promising alternative to known explosives such as TNT.     

Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

Regioselective synthesis of symmetrical pyridyl selenium compounds by bromine–magnesium exchange of bromopyridines using isopropyl magnesium chloride: X‐ray crystal structure of 2,2′,5,5′‐tetrabromo‐3,3′‐dipyridyldiselenide

2,2′‐Dipyridyl‐3,3′‐dipyridyl,5,5′‐dipyridyl‐diselenides have been synthesized by a convenient method employing non‐cryogenic conditions. Various bromopyridines (2‐Bromopyridine, 2,5‐dibromopyridines and 2,3,5‐Tribromopyridines) undergo selective monobromine–magnesium exchange to yield the corresponding pyridyl magnesium chlorides at room temperature upon treatment with ⁱPrMgCl. The resulting pyridyl magnesium chloride is quenched with elemental selenium, which upon further oxidation affords the above diselenides in good yields. The compounds prepared using this methodology have been characterized by elemental analysis, IR, NMR (¹H, ¹³C, ⁷⁷Se) and mass spectral analysis. The molecular structure of 2,2′,5,5′‐Tetrabromo‐3,3′‐dipyridyldiselenide has been established by single‐crystal X‐ray diffraction analysis. It exists as a dimeric form due to the non‐bonding interactions between the selenium of one pyridine moiety and the hydrogen of the other. Copyright © 2004 John Wiley & Sons, Ltd.     

Dense Energetic Nitraminofurazanes

3,3′‐Diamino‐4,4′‐bifurazane ( 1 ), 3,3′‐diaminoazo‐4,4′‐furazane ( 2 ), and 3,3′‐diaminoazoxy‐4,4′‐furazane ( 3 ) were nitrated in 100 % HNO₃ to give corresponding 3,3′‐dinitramino‐4,4′‐bifurazane ( 4 ), 3,3′‐dinitramino‐4,4′‐azofurazane ( 5 ) and 3,3′‐dinitramino‐4,4′‐azoxyfurazane ( 6 ), respectively. The neutral compounds show very imposing explosive performance but possess lower thermal stability and higher sensitivity than hexogen (RDX). More than 40 nitrogen‐rich compounds and metal salts were prepared. Most compounds were characterized by low‐temperature X‐ray diffraction, all of them by infrared and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and by differential scanning calorimetry (DSC). Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high energetic performances of the nitraminofurazanes as energetic materials. The sensitivities towards impact, friction, and electrostatic discharge were also explored. Additionally the general toxicity of the anions against vibrio fischeri, representative for an aquatic microorganism, was determined.     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Copper(II) and cadmium(II) isothiocyanate coordination polymers with 4,4′‐bi‐1,2,4‐triazole

The coordination polymers catena‐poly[[[(4,4′‐bi‐1,2,4‐triazole‐κN¹)bis(thiocyanato‐κN)copper(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′] dihydrate], {[Cu(NCS)₂(C₄H₄N₆)₂]·2H₂O}_n, (I), and poly[tetrakis(μ‐4,4′‐bi‐1,2,4‐triazole‐κ²N¹:N^1′)bis(μ‐thiocyanato‐κ²N:S)tetrakis(thiocyanato‐κN)tricadmium(II)], [Cd₃(NCS)₆(C₄H₄N₆)₄]_n, (II), exhibit chain and two‐dimensional layer structures, respectively. The differentiation of the Lewis acidic nature of Cu^II and Cd^II has an influence on the coordination modes of the triazole and thiocyanate ligands, leading to topologically different polymeric motifs. In (I), copper ions are linked by bitriazole N:N′‐bridges into zigzag chains and the tetragonal–pyramidal CuN₅ environment is composed of two thiocyanate N atoms and three triazole N atoms [basal Cu—N = 1.9530 (18)–2.0390 (14) Å and apical Cu—N = 2.2637 (15) Å]. The structure of (II) contains two types of crystallographically unique Cd^II atoms. One type lies on an inversion center in a distorted CdN₆ octahedral environment, with bitriazole ligands in the equatorial plane and terminal isothiocyanate N atoms in the axial positions. The other type lies on a general position and forms centrosymmetric binuclear [Cd₂(μ‐NCS‐κ²N:S)₂(NCS)₂] units (tetragonal–pyramidal CdN₄S coordination). N:N′‐Bridging bitriazole ligands link the Cd centers into a flat (4,4)‐network.     

Synthesis,Characterization, and Energetic Properties of Alkaline and Alkaline Earth Salts of 5,5′‐bistetrazole‐1,1′‐diolate

5,5′‐Bistetrazole‐1,1′‐diolate‐based energetic salts from alkaline (Li⁺, K⁺, and Na⁺) and alkaline earth metal salts (Mg²⁺, Ca²⁺, and Ba²⁺) were synthesized in a simple, straightforward manner and were characterized by IR and NMR spectroscopy, and elemental analysis. Single‐crystal X‐ray diffraction of 4 salts (Li⁺, Na⁺, K⁺, and Mg²⁺) is given. The X‐ray structures show that in the title compounds, the metal atoms are bonded to the nitrogen and oxygen in the bistetrazole ring to form the sandwich structure. In addition, thermal stabilities of all title compounds were determined with differential thermal analysis‐thermal gravity analysis. All these new materials exhibit excellent thermal stabilities, high density, and excellent insensitivity to impact (h ₅₀ > 60 cm). Especially, the potassium salt is of interest as potential “green heat‐resistance explosive” with high density and high thermal stability as well as low sensitivity.     

Synthesis,Characterisation and Crystal Structures of Two Bi‐oxadiazole Derivatives Featuring the Trifluoromethyl Group

The synthesis, characterisation, and crystal structure determination of the closely related compounds 3,3′‐bi‐(5‐trifluoromethyl‐1,2,4‐oxadiazole) and 5,5′‐bi‐(2‐ trifluoromethyl‐1,3,4‐oxadiazole) are reported. These two compounds are known for their bioactivity; however, in this study they serve as model compounds to evaluate the suitability of the heterocyclic oxadiazole ring system for energetic materials when the fluorine atoms in the exocyclic CF₃ groups are substituted successively by nitro groups. Quantum chemical calculations for the bi‐1,3,4‐ oxadiazole derivatives with difluoronitromethyl, fluorodinitromethyl, and trinitromethyl groups have been carried out and predict promising energetic performances for both explosive and propulsive applications.     

Two Energetic Salts based on 5,5′‐Bitetrazole‐1,1′‐diolate: Syntheses,Characterization, and Properties

Two salts based on 1H,1′H‐5,5′‐bitetrazole‐1,1′‐diolate (BTO) anion with pyrazole ( 1 ) and imidazole ( 2 ) cations were synthesized with metathesis reactions. Structural characterization was accomplished for them by using the element analysis, Fourier transform infrared spectroscopy (FT‐IR), NMR and mass spectrum, and X‐ray single crystal diffraction. Thermal analysis for the title salts were determined by means of differential scanning calorimetry (DSC) and thermogravimetry‐derivative thermogravimetry (TG‐DTG) as well as the calculation of non‐isothermal kinetic parameters. Consequently, both salts shown acceptable thermal stabilities as the decomposition temperatures were over 200 °C. The enthalpies of formation were calculated for these salts using the measured combustion energies with a result of 70.6 kJ · mol^–1 for 1 and –47.8 kJ · mol^–1 for 2 , respectively. Impact and friction sensitivities were also tested and the results indicated that these salts both have low sensitivities (>40 J, 120 N). The title energetic salts possess acceptable performance, they can therefore be applied in the field of energetic materials.