Acid–Base‐Responsive Intense Charge‐Transfer Emission in Donor–Acceptor‐Conjugated Fluorophores

Herein we report on the synthesis and acid‐responsive emission properties of donor–acceptor (D–A) molecules that contain a thienothiophene unit. 2‐Arylthieno[3,2‐b]thiophenes were conjugated with an N‐methylbenzimidazole unit to form acid‐responsive D–A‐type fluorophores. The D–A‐conjugated fluorophores showed intense intramolecular charge‐transfer (ICT) emission in response to acid. The effect of the substitution on their photophysical properties as well as their solvent‐dependence indicated non‐twisting ICT emission in protonated D–A molecules. The quinoidal character of 2‐arylthienothiophene as a donor part is discussed, as it is assumed that it contributes to suppression of the molecular twisting in the excited state, therefore decreasing the nonradiative rate constant, thereby resulting in the intense ICT emission. Acid–base‐sensitive triple‐color emission was also achieved by the introduction of a base‐responsive phenol group in the donor part.     

Mechanochromic Delayed Fluorescence Switching in Propeller‐Shaped Carbazole–Isophthalonitrile Luminogens with Stimuli‐Responsive Intramolecular Charge‐Transfer Excited States

Herein, the universal design of high‐efficiency stimuli‐responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli‐triggered TADF switching for a series of carbazole–isophthalonitrile‐based donor–acceptor (D–A) luminogens is demonstrated based on systematic photophysical and X‐ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D–A twisting in the excited‐state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light‐emitting diodes using a single TADF emitter.     

Stiff,Multistimuli‐Responsive Supramolecular Hydrogels as Unique Molds for 2D/3D Microarchitectures of Live Cells

Supramolecular hydrogels constructed through molecular self‐assembly of small molecules have unique stimuli‐responsive properties; however, they are mechanically weak in general, relative to conventional polymer gels. Very recently, we developed a zwitterionic amino acid tethered amphiphilic molecule 1 , which gave rise to a remarkably stiff hydrogel comparable with polymer‐based agarose gel, retaining reversible thermal‐responsive properties. In this study, we describe that rational accumulation of multiple and orthogonal noncovalent interactions in the supramolecular nanofibers of 1 played crucial roles not only in the mechanical reinforcement but also in the multistimuli responsiveness. That is, the zwitterionic amino acid moiety and the C C double bond unit of the hydrogelator 1 can function as a pH‐responsive unit and a light‐responsive unit, respectively. We also demonstrated that this stiff and multistimuli‐responsive supramolecular hydrogel 1 is applied as a unique mold for 2D and 3D‐patterning of various substances. More significantly, we succeeded in the fabrication of a collagen gel for spatial patterning, culturing, and differentiation of live cells by using hydrogel 1 molds equipped with 2D/3D microspace channels (100–200 μm in diameter).     

Proof of Potassium Ions by Luminescence Signaling Based on Weak Gold–Gold Interactions in Dinuclear Gold(I) Complexes

Two versatile luminescence ion probes for potassium ions have been designed based on the “switching on and off” of the gold–gold interaction. Addition of potassium ions to the gold(I ) complexes [Au₂(R₂PCH₂PR₂)(S-benzo[15]crown-5)₂] (see the picture; R=Ph, cyclohexyl; M⁺=K⁺) give rise to an intense red luminescence.     

Design of donor–acceptor–donor (D–A–D) type small molecule donor materials with efficient photovoltaic parameters

Four Donor–Acceptor–Donor (D–A–D) type of donor molecules (M1‐M4) with triphenylamine (TPA) as donor moiety, thiophene as bridge, and thiazolothiazole as acceptor unit were designed and its photovoltaic parameters were equated with reference molecule “R.” DFT functional CAM‐B3LYP/6‐31G (d,p) was found best for geometry optimization and TD‐CAM‐B3LYP/6‐31G (d,p) was found suitable for excited state calculations. Among designed donor molecules, M4 manifests suitable lowest band gap of 4.73 eV, frontier molecular orbital energy levels as well as distinctive broad absorption of 455.3 nm due to the stronger electron withdrawing group. The electron‐withdrawing substituents contribute to red shifts of absorption spectra and better stabilities for designed molecules. The theoretically determined reorganization energies of designed donor molecules suggested excellent charge mobility property. The lower λ_e values in comparison with λ_h illustrated that these four donor materials would be ideal for electron transfer and M4 would be best amongst the investigated molecules with lowest λ_e of 0.0177. Furthermore, the calculated Voc of M4 is 2.04 V with respect to PC₆₀BM (phenyl‐C61‐butyric acid methyl ester). This study revealed that the designed donor materials are suitable and recommended for high performance organic solar cell devices.     

Stimuli‐Responsive Reversible Fluorescence Switching in a Crystalline Donor–Acceptor Mixture Film: Mixed Stack Charge‐Transfer Emission versus Segregated Stack Monomer Emission

We report on a molecularly tailored 1:1 donor–acceptor (D‐A) charge‐transfer (CT) cocrystal that manifests strongly red‐shifted CT luminescence characteristics, as well as noteworthy reconfigurable self‐assembling behaviors. A loosely packed molecular organization is obtained as a consequence of the noncentrosymmetric chemical structure of molecule A1 , which gives rise to considerable free volume and weak intermolecular interactions. The stacking features of the CT complex result in an external stimuli‐responsive molecular stacking reorganization between the mixed and demixed phases of the D‐A pair. Accordingly, high‐contrast fluorescence switching (red?blue) is realized on the basis of the strong alternation of the electronic properties between the mixed and demixed phases. A combination of structural, spectroscopic, and computational studies reveal the underlying mechanism of this stimuli‐responsive behavior.     

Efficient Intramolecular Charge Transfer in Oligoyne‐Linked Donor–π–Acceptor Molecules

Studies are reported on a series of triphenylamine–(C?C)_n–2,5‐diphenyl‐1,3,4‐oxadiazole dyad molecules (n=1–4, 1 , 2 , 3 and 4 , respectively) and the related triphenylamine‐C₆H₄–(C?C)₃–oxadiazole dyad 5 . The oligoyne‐linked D–π–A (D=electron donor, A=electron acceptor) dyad systems have been synthesised by palladium‐catalysed cross‐coupling of terminal alkynyl and butadiynyl synthons with the corresponding bromoalkynyl moieties. Cyclic voltammetric studies reveal a reduction in the HOMO–LUMO gap in the series of compounds 1 – 4 as the oligoyne chain length increases, which is consistent with extended conjugation through the elongated bridges. Photophysical studies provide new insights into conjugative effects in oligoyne molecular wires. In non‐polar solvents the emission from these dyad systems has two different origins: a locally excited (LE) state, which is responsible for a π*→π fluorescence, and an intramolecular charge transfer (ICT) state, which produces charge‐transfer emission. In polar solvents the LE state emission vanishes and only ICT emission is observed. This emission displays strong solvatochromism and analysis according to the Lippert–Mataga–Oshika formalism shows significant ICT for all the luminescent compounds with high efficiency even for the longer more conjugated systems. The excited‐state properties of the dyads in non‐polar solvents vary with the extent of conjugation. For more conjugated systems a fast non‐radiative route dominates the excited‐state decay and follows the Engelman–Jortner energy gap law. The data suggest that the non‐radiative decay is driven by the weak coupling limit.     

Are water–aromatic complexes always stabilized due to π–H interactions? LMP2 study

Eight complexes of various aromatic molecules with water have been studied theoretically at the local Møller–Plesset 2nd order theory (LMP2)/aug‐cc‐pVTZ(‐f)//LMP2/6‐31+G* level of theory. Two types of complexes can be formed, depending on the electronic structure of aromatic molecules. Donor hydrocarbons form A‐type complexes, while aromatics bearing electron‐withdrawing substituents form B‐type complexes. A‐type complexes are stabilized due to π–H interactions with the OH bond pointing to the aromatic molecule plane, while B‐type complexes have geometry with the oxygen atom pointing to the aromatic molecule plane stabilized by the interaction of highest occupied molecular orbital (HOMO) of water molecule with π* orbitals of the aromatics. It has been found that a (? HOMO–lowest unoccupied molecular orbital (LUMO)/2 value of aromatic molecule, which can be called “molecular electronegativity,” is useful to predict the type of complex formed by aromatic molecule and water. Aromatic hydrocarbons with “molecular electronegativity” of <0.15 tend to form A‐type complexes, while aromatic molecules with “molecular electronegativity” of <0.15 a.u. form B‐type complexes. The binding energy of water–aromatic complexes undergoes a minimum in the area of switching from A‐type to B type complexes, which can be rationalize in terms of frontier orbital interactions. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Luminescent mesogen jacketed poly(1‐alkyne) bearing lateral terphenyl with hexyloxy tail

Mesogen jacketed liquid crystalline poly(1‐alkyne) and poly(1‐phenyl‐1‐alkyne) linked pendants of terphenyl mesogens with hexyloxy tails at the waist position (? {RC?C? [(CH₂)₃OOC‐terpheyl‐(OC₆H₁₃)₂]}_n? , where R?H, PHATP(OC6)2 ; R?C₆H₅, PPATP(OC6)2 ) were synthesized. The influences of structural variations on the thermal, mesomorphic, and luminescent properties were investigated. Polymerizations of all monomers are carried out by WCl₆‐Ph₄Sn catalysts successfully. The polymers are stable (T_d ≥ 340 °C) and soluble in common solvents. The monomers and polymers show enantiotropic SmA phases in the heating and cooling processes, and the lateral side chains of the mesogenic units are perpendicular to the main chain. The “jacket effect” of chromophoric terphenyl core “shell” around the main chain also contributes to polymers with high photoluminescence, and the pendant‐to‐backbone energy transfer path is involved in the luminescence process of this polymers. In comparison with monosubstituted polyacetylene PHATP(OC6)2 , the disubstituted polyacetylene PPATP(OC6)2 shows better photoluminescence in both THF solution and film, and exhibited about 40 nm red‐shifted than PHATP(OC6)2 , indicating that the “jacket effect” of terphenyl mesogens forces poly(1‐phenyl‐1‐alkyne) backbone to extend in a more planar conformation with a better conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,optical and photoconducting properties of platinum poly‐yne polymers functionalized with electron‐donating and electron‐withdrawing bithiazole units

By virtue of the electron‐donating and electron‐withdrawing properties of the thiazole ring, a new soluble rigid‐rod organometallic polymer containing electron‐donating and electron‐withdrawing trans‐[‐Pt‐(PBu₃)₂‐C≡C—R—C≡C—]_n (R = bithiazolediyl) groups is prepared by CuI‐catalyzed dehydrohalogenation. The thermal properties and the optical absorption and photoluminescence spectra of the polymer are reported. The polymer is luminescent with a singlet emission peak at 539 nm and photoconducting in a single‐layer sandwich structure photocell. The optical gap of the polymer is reduced compared to that for the oligothienyl analogue.     

High‐Contrast Red–Green–Blue Tricolor Fluorescence Switching in Bicomponent Molecular Film

Highly efficient red–green–blue (RGB) tricolor luminescence switching was demonstrated in a bicomponent solid film consisting of (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(4‐butoxyphenyl)acrylonitrile) (DBDCS) and (2Z,2′Z)‐3,3′‐(2,5‐bis(6‐(9H‐carbazol‐9‐yl)hexyloxy)‐1,4‐phenylene)bis(2‐(3,5‐bis(trifluoromethyl)phenyl)acrylonitrile) (m‐BHCDCS). Reversible RGB luminescence switching with a high ratiometric color contrast (λ_em=594, 527, 458 nm for red, green, and blue, respectively) was realized by different external stimuli such as heat, solvent vapor exposure, and mechanical force. It was shown that Förster resonance energy transfer in the bicomponent mixture could be efficiently switched on and off through supramolecular control.     

Charge Transfer Induces Formation of Stimuli‐Responsive,Chiral, Cohesive Vesicles‐on‐a‐String that Eventually Turn into a Hydrogel

A charge transfer (CT) mediated two‐component, multistimuli responsive supergelation involving a L ‐histidine‐appended pyrenyl derivative (PyHisOMe) as a donor and an asymmetric bolaamphiphilic naphthalene‐diimide (Asym‐NDI) derivative as an acceptor in a 2:1 mixture of H₂O/MeOH was investigated. Asym‐NDI alone self‐assembled into pH‐responsive vesicular nanostructures in water. Excellent selectivity in CT gel formation was achieved in terms of choosing amino acid appended pyrenyl donor scaffolds. Circular dichroism and morphological studies suggested formation of chiral, interconnected vesicular assemblies resembling “pearls‐on‐a‐string” from these CT mixed stacks. XRD studies revealed the formation of monolayer lipid membranes from these CT mixed stacks that eventually led to the formation of individual vesicles. Strong cohesive forces among the interconnected vesicles originate from the protrusion of the oxyethylene chains from the surfaces of the chiral vesicles.     

Reversible Multistimuli‐Response Fluorescent Switch Based on Tetraphenylethene–Spiropyran Molecules

Two tetraphenylethene (TPE)‐functionalized spiropyran (SP) molecules with very similar structure were designed and synthesized. The two molecules exhibit aggregation‐induced emission (AIE) properties, as well as multistimuli‐responsive color‐changing properties, such as photochromism and acidchromism. The investigation of their different photochromic and acidchromic characteristics and dual‐response fluorescent switch during isomerization indicated that the different link position between TPE and SP will significantly affect the extended π‐conjugated system, resulting in completely different photochromic and acidchromic properties.     

Chiral Atropisomeric Indenocorannulene Bowls: Critique of the Cahn–Ingold–Prelog Conception of Molecular Chirality

Chiral corannulenes abound, but suffer generally from configurational lability associated with bowl‐to‐bowl inversion, 1 thus obviating questions of stereogenicity and stereoelement construction. 2 In contrast, peri‐annulated corannulenes show greatly increased barriers for bowl‐to‐bowl inversion; specifically indenocorannulenes invert on a time scale too slow to observe by normal NMR methods and raise the possibility of creating chiral atropisomeric bowl‐shaped aromatics. 3 Two methods for preparing indenocorannulene from simple 2‐haloarylcorannulenes—silyl cation C–F activation, 4 and Pd‐mediated C–Cl activation^[5]—enable the synthesis of an array of such chiral atropisomeric indenocorannulenes. 6 Resolution of the enantiomers by high‐performance liquid chromatography over chiral support phases motivates the study of chiroptical properties, the assignment of absolute “Cartesian” configuration, and the assessment of configurational stability. 7 These studies bring into question any systematic assignment of nontrivial stereoelements (i.e. not the molecule in its entirety) and refute any assertion of congruence between “Cahn–Ingold–Prelog elements” and the physical or “Cartesian” basis of chirality.     

Loading Photochromic Molecules into a Luminescent Metal–Organic Framework for Information Anticounterfeiting

Stimuli‐responsive photoluminescent materials have attracted considerable attention owing to their potential applications in security protection because the information recorded directly in materials with static luminescent outputs are usually visible under either ambient or UV light. Herein, we realize reversible information anticounterfeiting by loading a photoswitchable diarylethene derivative into a lanthanide metal–organic framework (MOF). Light triggers the open‐ and closed‐form isomerization of the diarylethene unit, which respectively regulates the inactivation and activation of the photochromic FRET process between the diarylethene acceptor and lanthanide donor, resulting in reversible luminescence on–off switching of the lanthanide emitting center in the MOF host. This photoresponsive host–guest system allows for reversible multiple information pattern visible/invisible transformation by simply alternating the exposure to UV and visible light.     

Multistimuli‐Responsive Supramolecular Organogels Formed by Low‐Molecular‐Weight Peptides Bearing Side‐Chain Azobenzene Moieties

This work demonstrates that the incorporation of azobenzene residues into the side chain of low‐molecular‐weight peptides can modulate their self‐assembly process in organic solvents leading to the formation of stimuli responsive physical organogels. The major driving forces for the gelation process are hydrogen bonding and π–π interactions, which can be triggered either by thermal or ultrasound external stimuli, affording materials having virtually the same properties. In addition, a predictive model for gelation of polar protic solvent was developed by using Kamlet–Taft solvent parameters and experimental data. The obtained viscoelastic materials exhibited interconnected multistimuli responsive behaviors including thermal‐, photo‐, chemo‐ and mechanical responses. All of them displayed thermoreversability with gel‐to‐sol transition temperatures established between 33–80 °C and gelation times from minutes to several hours. Structure–property relationship studies of a designed peptide library have demonstrated that the presence and position of the azobenzene residue can be operated as a versatile regulator to reduce the critical gelation concentration and enhance both the thermal stability and mechanical strength of the gels, as demonstrated by comparative dynamic rheology. The presence of N‐Boc protecting group in the peptides showed also a remarkable effect on the formation and properties of the gels. Despite numerous examples of peptide‐based gelators known in the literature, this is the first time in which low‐molecular‐weight peptides bearing side chain azobenzene units are used for the synthesis of “intelligent” supramolecular organogels. Compared with other approaches, this strategy is advantageous in terms of structural flexibility since it is compatible with a free, unprotected amino terminus and allows placement of the chromophore at any position of the peptide sequence.     

A Self‐Assembled Luminescent Host That Selectively Senses ATP in Water

Metal‐ion‐directed self‐assembly has been used to construct kinetically inert, water‐soluble heterometallic Ru₂Re₂ hosts that are potential sensors for bioanions. A previously reported metallomacrocycle and a new derivative synthesised by this approach are found to be general sensors for bioanions in water, showing an “off–on” luminescent change that is selective for nucleotides over uncharged nucleobases. Through a change in the ancillary ligands coordinated to the ruthenium centres of the host, an “off–on” sensor has been produced. Whilst this host only shows a modest enhancement in binding affinities for nucleotides relative to the other two host systems, its sensing response is much more specific. Although a distinctive “off–on” luminescence response is observed for the addition of adenosine triphosphosphate (ATP), related structures such as adenine and guanosine triphosphate (GTP) do not induce any emission change in the host. Detailed and demanding DFT studies on the ATP‐ and GTP‐bound host–guest complexes reveal subtle differences in their geometries that modulate the stacking interactions between the nucleotide guests and the ancillary ligands of the host. It is suggested that this change in stacking geometries affects solvent accessibility to the binding pocket of the host and thus leads to observed difference in the host luminescence response to the guests.     

Stimulus‐Responsive Metal–Organic Frameworks

Materials that can recognize the changes in their local environment and respond by altering their inherent physical and/or chemical properties are strong candidates for future “smart” technology materials. Metal–organic frameworks (MOFs) have attracted a great deal of attention in recent years owing to their designable architecture, host–guest chemistry, and softness as porous materials. Despite this fact, studies on the tuning of the properties of MOFs by external stimuli are still rare. This review highlights the recent developments in the field of stimulus‐responsive MOFs or so‐called smart MOFs. In particular, the various stimuli used and the utility of stimulus‐responsive smart MOFs for various applications such as gas storage and separation, sensing, clean energy, catalysis, molecular motors, and biomedical applications are highlighted by using representative examples. Future directions in the developments of stimulus‐responsive smart MOFs and their applications are proposed from a personal perspective.     

Acyl Fluorides in Late‐Transition‐Metal Catalysis

In this Review, we summarize the current state of the art in late‐transition‐metal‐catalyzed reactions of acyl fluorides, covering both their synthesis and further transformations. In organic reactions, the relationship between stability and reactivity of the starting substrates is usually characterized by a trade‐off. Yet, acyl fluorides display a very good balance between these properties, which is mostly due to their moderate electrophilicity. Thus, acyl fluorides (RCOF) can be used as versatile building blocks in transition‐metal‐catalyzed reactions, for example, as an “RCO” source in acyl coupling reactions, as an “R” source in decarbonylative coupling reactions, and as an “F” source in fluorination reactions. Starting from the cleavage of the acyl C?F bond in acyl fluorides, various transformations are accessible, including C?C, C?H, C?B, and C?F bond‐forming reactions that are catalyzed by transition‐metal catalysts that contain the Group 9–11 metals Co, Rh, Ir, Ni, Pd, or Cu.     

A EuIII‐MOF with Bis(2‐carboxyethyl)isocyanurate for Luminescence Sensing of Fe3+ and SCN– Ions

The water‐stable 3D lanthanide‐organic framework (Ln‐MOF) {[Eu(bci)(H₂O)] · 2H₂O}_n ( 1 ) [H₂bci = bis(2‐carboxyethyl)isocyanurate] was synthesized under hydrothermal conditions. Compound 1 ‐ Eu exhibits a 3D open‐framework connected by Eu–(μ‐O)₂–Eu chains and bci ligands. Meanwhile, 1 ‐ Eu exhibits highly efficient luminescent sensing for environmentally relevant Fe³⁺ and SCN^– ions through luminescence quenching. These results indicated that it could be utilized as a multi‐responsive luminescence sensor.