On the plastic zone size of solids containing doubly periodic rectangular-shaped arrays of cracks under longitudinal shear

Multiple cracks interaction plays an important role in fracture behavior of materials. A number of studies have been devoted to analytical and numerical analyses of the doubly periodic arrays of cracks. A very natural and highly accurate solution procedure is proposed to describe the interaction effect among the doubly periodic rectangular-shaped arrays of cracks. The proposed solution is implemented in the framework of continuously distributed dislocation model and singular integral equation approach. The accuracy of this solution is proved through a comparison of results from the present simulation and known closed form solutions. Further, the interaction effects among the periodic cracks on the plastic zone size and crack tip opening displacement are studied. It is found that the interaction distance among the vertical and horizontal periodic cracks is quite different.     

The interaction of doubly periodic cracks

In this paper, an extremely accurate and efficient method for computing the interaction of a set of or multiple sets of general doubly periodic cracks has been presented on the basis of superposition principle, pseudo-traction method, and isolating analysis technique. A great number of typical examples are given in this paper. The stress intensity factors (SIF), the minimum strain energy density factors (SED) of crack tip and the critical stress (CRS) of crack growth are calculated with the accuracy of six significant digits for the rectangularly distributed periodic cracks and five significant digits for the general doubly periodic cracks. The relation of the interaction effect of the double periodic cracks with the periods and the ratio of crack length to crack spacing is analyzed. Also in this paper, the key technique problems for this method are discussed.     

Interface crack problems for mode II of double dissimilar orthotropic composite materials

The fracture problems near the similar orthotropic composite materials are interface crack tip for mode Ⅱ of double disstudied. The mechanical models of interface crack for mode Ⅱ are given. By translating the governing equations into the generalized hi-harmonic equations, the stress functions containing two stress singularity exponents are derived with the help of a complex function method. Based on the boundary conditions, a system of non-homogeneous linear equations is found. Two real stress singularity exponents are determined be solving this system under appropriate conditions about bimaterial engineering parameters. According to the uniqueness theorem of limit, both the formulae of stress intensity factors and theoretical solutions of stress field near the interface crack tip are derived. When the two orthotropic materials are the same, the stress singularity exponents, stress intensity factors and stresses for mode II crack of the orthotropic single material are obtained.     

ON PROBLEMS OF FRACTURE OF MATERIALS IN COMPRESSION ALONG TWO INTERNAL PARALLEL CRACKS

I.Relati0ns0fN0n-LinearThe0ryandDerivati0nofLinearizedRelati0nsinCoordinates0fN0n.DeformedStateNotationsareintroduced:x,-x'-Lagrangiancoordinateswhichinthenatural(non-def0rmed)statecoincidewithCartesiancoordinateswith0rthse,.Coordinatesx,willbeassumedtobe…     

双周期圆截面纤维复合材料平面问题的解析法

结合双准周期Riemann边值问题理论与Eshelby等效夹杂原理，为双周期圆截面纤维复合材 料平面问题发展了一个实用有效的解析方法，获得了问题的全场级数解并与有限元结果进行 了比较. 该方法为非均匀材料的力学性质分析和复合材料等新材料的微结构设计提供了 一个有效的计算工具，也可用来评估有限元等数值与近似方法的精度.     

具有孔洞的双周期热弹性平面问题的复势

首先论述了针对调和变温场的热弹性平面问题的复变函数方法,给出了受调和变温时有限 多连通域中复势的一般表达式. 然后基于已知实部的双周期解析函数及其原函数的表示和多 值性分析,导出了双周期调和变温下具有双周期分布孔洞物体平面弹性问题的两个复势函数 的一般公式,由此论证了两种特殊情形下物体的温度应力为零.     

Coupled solution for anisotropic piezoelectric materials with cracks

The coupled elastic and electric fields for anisotropic piezoelectric materials with electrically permeable cracks are analyzed by using Stroh formula in anisotropic elasticity. It is shown from the solution that the tangent component of the electric field strength and the normal component of the electric displacement along the faces of cracks are all constants, and the electric field intensity and electric displacement have the singularity of type (1/2) at the crack tip. The energy release rate for crack propagation depends on both the stress intensity factor and material constants. The electric field intensity and electric displacement inside electrically permeable cracks are all constants.     

Three-dimensional instability problems for viscoelastic composite materials and structural members

Investigations of viscoelastic composite materials and structural members carried out using the TDLTSDB and initial-imperfection method are reviewed. The investigations address the internal and surface loss of stability of layered and fibrous composites, the loss of stability of plates, and the delamination (buckling) of plates with cracks. Each of these problems is reviewed separately. New areas of further research are proposed. The review focuses on the investigations carried out by the author and his students Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 3–27, October 2007.     

Fracture analysis for torsion problems of a composite cylinder with curvilinear cracks

The Salnt-Venant torsion problems of a composite cylinder with curvilinear cracks were investigated. By considering the bimaterial interface as a boundary of the outer bar or inner one, the problem was reduced to the solution of boundary integral equations on the crack, external boundary and interface. Using the new boundary element method, some typical torsion problems of a composite cylinder involving a straight or kinked crack were calculated. The obtained results were compared with data in the literature to show validity and applicability of the present method.     

The cut-and-try method in determining the saturate spacing of transverse cracks of composite laminates

In this paper, the saturate spacing of transverse cracks of the 90° ply is originally calculated by the 3-D finite element method. Thus, a new approach is put forward for predicting the saturate spacing of transverse cracks.     

Problem of the periodic welding of anisotropic elastic plane with different materials

ＩｎｔｒｏｄｕｃｔｉｏｎＵｐｔｏｎｏｗ,ｔｈｅｒｅｈａｖｅｂｅｎｍａｎｙｒｅｓｅａｒｃｈｅｓｏｎｔｈｅｐｌａｎｅｗｅｌｄｉｎｇｐｒｏｂｌｅｍｏｆｉｓｏｔｒｏｐｉｃｍａｔｅｒｉａｌｓ．ｅ．ｇ．［１］ａｎｄ［２］ｅｔｃ．Ｈｏｗｅｖｅｒ,ｆｏｒｔｈｅｐｌａ...     

Certain elastoplastic problems for a plane weakened by a doubly periodic system of circular holes

Elastoplastic problems for an infinite perforated plane possessing a square grid of circular holes are examined. It is assumed that the level of stresses and the grid spacing are such that the circular holes envelop the corresponding plastic zone, though neighboring plastic regions are not connected. The elastoplastic problem for a triangular grid has been previously examined [1] under the assumption that the matter in the elastic and plastic regions is homogeneous.     

Crack problems of piezoelectric materials

This paper presents an analysis of crack problems in homogeneous piezoelectrics or on the interfaces between two dissimilar piezoelectric materials based on the continuity of normal electric displacement and electric potential across the crack faces. The explicit analytic solutions are obtained for a single crack in piezoelectrics or on the interfaces of piezoelectric bimaterials. A class of boundary problems involving many cracks is also solved. For homogeneous materials it is found that the normal electric displacementD ₂ induced by the crack is constant along the crack faces which depends only on the applied remote stress field. Within the crack slit, the electric fields induced by the crack are also constant and not affected by the applied electric field. For the bimaterials with realH, the normal electric displacementD ₂ is constant along the crack faces and electric fieldE ₂ has the singularity ahead of the crack tip and a jump across the interface. The project is supported by the National Natural Science Foundation of China(No. 19704100) and the Natural Science Foundation of Chinese Academy of Sciences(No. KJ951-1-201).     

On the modelling of dynamic problems for plates with a periodic structure

Summary The subject of analysis is the bending of elastic plates exhibiting a nonhomogeneous periodic structure and/or a periodically variable thickness in a certain direction parallel to the plate's midplane. The fundamental modelling problem is how to obtain an effective 2D-model of a plate under consideration, i.e., a 2D-model represented by PDEs with constant coefficients. This problem for periodic plates has been solved independently in [5] and [10], using asymptotic homogenization. However, homogenization neglects dynamic phenomena related to the plate's rotational inertia and cannot be applied to the analysis of higher-order vibration frequences. The main aim of this contribution is to formulate a new non-asymptotic effective 2D-model of a periodic plate which is free from the mentioned drawbacks and describes the dynamic behaviour of plates having the thickness of the order of the period length. The proposed model is applied to the analysis of some vibration problems.     

Heat flow disturbed by periodic array of insulated interface cracks

The thermal effects of an interface crack between two dissimilar half-spaces is considered. The interface cracks are partially or fully insulated, and spaced in a periodic array. Using the complex variable technique, the temperature and fluxes are found in closed form, and the interactions between heat flows due to nearby cracks are determined.     

Fracture of a body with a periodic set of coaxial cracks under forces directed along them: an axisymmetric problem

Linearized solid mechanics is used to solve an axisymmetric problem for an infinite body with a periodic set of coaxial cracks. Two nonclassical fracture mechanisms are considered: fracture of a body with initial stresses acting in parallel to crack planes and fracture of materials compressed along cracks. Numerical results are obtained for highly elastic materials described by the Bartenev–Khazanovich, Treloar, and harmonic elastic potentials. The dependence of the fracture parameters on the loading conditions, the physical and mechanical characteristics of the material, and the geometrical parameters is analyzed Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 3–18, February 2009.     

Simulation of elastic wave diffraction by multiple strip-like cracks in a layered periodic composite

The problem of numerical simulation of the steady-state harmonic vibrations of a layered phononic crystal (elastic periodic composite) with a set of strip-like cracks parallel to the layer boundaries is solved, and the accompanying wave phenomena are considered. The transfer matrix method (propagator matrix method) is used to describe the incident wave field. It allows one not only to construct the wave fields but also to calculate the pass bands and band gaps and to find the localization factor. The wave field scattered by multiple defects is represented by means of an integral approach as a superposition of the fields scattered by all cracks. An integral representation in the form of a convolution of the Fourier symbols of Green’s matrices for the corresponding layered structures and a Fourier transform of the crack opening displacement vector is constructed for each of the scattered fields. The crack opening displacements are determined by the boundary integral equation method using the Bubnov-Galerkin scheme, where Chebyshev polynomials of the second kind, which take into account the behavior of the solution near the crack edges, are chosen as the projection and basis systems. The system of linear algebraic equations with a diagonal predominance of components arising when the system of integral equations is discretized has a block structure. The characteristics describing qualitatively and quantitatively the wave processes that take place under the diffraction of plane elastic waves by multiple cracks in a phononic crystal are analyzed. The resonant properties of a system of defects and the influence of the relative positions and sizes of defects in a layered phononic crystal on the resonant properties are studied. To obtain clearer results and to explain them, the energy flux vector is calculated and the energy surfaces and streamlines corresponding to them are constructed.     

压电界面裂纹裂尖强度因子的显式计算公式

对常见横观各向同性压电材料(TIP)中界面裂纹的裂纹面与压电材料的极化方向成任意夹角的一般情况进行了研究,通过推导得到了计算裂尖强度因子的显式外推公式,同时给出了裂纹面与极化方向垂直的典型情况下的外推公式.这些显式计算公式为常见数值方法如有限元法及边界元法在压电材料断裂力学中的应用提供了便利.     

On the dynamic behavior of a functionally graded piezoelectric strip with periodic cracks vertical to the boundary

The dynamic anti-plane problem for a functionally graded piezoelectric strip containing a periodic array of parallel cracks, which are perpendicular to the boundary, is considered. Integral transforms techniques are employed to reduce the problem to the solution of singular integral equations. Numerical results are presented to show the influences of geometry, electromechanical combination factor and material gradient parameter on the fracture behavior.