In vitro production of Clostridium difficile spores for use in the efficacy evaluation of disinfectants: a precollaborative investigation

Clostridium difficile is a strict anaerobic spore-forming bacterium, and an increasingly common nosocomial pathogen. The U.S. Environmental Protection Agency (EPA) is responsible for the registration of disinfectants, including products designed to treat environmental surfaces contaminated with spores of C. difficile. Product efficacy data are required for registration; however, there is a lack of methodology for generating high-quality spore suspensions for evaluating product performance. As such, a study was carried out to select a suitable C. difficile strain and to develop a stand-alone method to prepare a spore suspension that meets specific criteria necessary for quantitative testing of disinfectants. The criteria are: (1) a spore titer of > 8 log10/mL, (2) > or = 90% spores to vegetative cells, and (3) resistance of spores (determined by viability) to 2.5 M hydrochloric acid (HCl). Several strains of C. difficile (toxigenic and nontoxigenic) were grown on various media (solid and liquid) for varying lengths of time to determine the best combination of incubation conditions and media to optimize spore production and quality. Once the spore production procedure was optimized, a toxigenic strain of C. difficile [American Type Culture Collection (ATCC) 43598] was selected for use in trials to verify repeatability from one production run to the next. The spore suspension was initiated by spreading vegetative cells of C. difficile (ATCC 43598) on CDC anaerobic 5% sheep blood agar plates and incubating for 7-10 days at 36 +/- 1 degrees C under anaerobic conditions. Spores were harvested when > or = 90% of the cells converted to spores as determined by observation using phase-contrast microscopy. The spores were washed three times with saline-Tween-80, resuspended in cold deionized water, heated to 70 degrees C for 10 min, evaluated microscopically for quality, and enumerated on cycloserine-cefoxitin-fructose agar containing horse blood and taurocholate. The spore suspension was used to inoculate brushed stainless steel carriers (1 cm in diameter) with and without a soil load in accordance with the Standard Quantitative Carrier Disk Test Method (ASTM E-2197-02) to determine carrier load. Once it was determined that > 6 log10 spores/carrier could be recovered, spores were evaluated for resistance to HCI. The sporulation method presented in this report is simple and repeatable and results in spore suspension of high titer (> 8 log10/mL) and quality (> or = 90% spores to vegetative cells) that met acid resistance criteria (spores were resistant to 2.5 M HCI for 10 min). In addition, recovery from brushed stainless steel carriers with and without soil load was > 6 log10 spores/carrier. A 6 log10 performance standard was set forth in the EPA's interim guidance for generating data to support a label claim for effectiveness against C. difficile spores on hard, nonporous surfaces. This precollaborative investigation successfully demonstrated the use of a methodology for in vitro production of C. difficile spores (ATCC 43598) necessary for conducting efficacy tests. A proposal will be submitted to the AOAC INTERNATIONAL Methods Committee on Antimicrobial Efficacy Testing for a collaborative study; see Appendix.     

Clostridium difficile toxin B: characterization and sequence of three peptides

The cytotoxin, also named toxin B, was isolated from a toxigenic strain of Clostridium difficile, purified to homogeneity and partially characterized. The purification procedure included ultrafiltration followed by anion-exchange chromatography. We noticed that a non-specific nucleic material eluted with the protein during the purification. The presence of these nucleic acids appeared to be important for the toxic activity of the protein. Some characteristics of the cytotoxin were examined, especially the amino acid composition and the sequence of three tryptic fragments.     

Total Synthesis of Five Lipoteichoic acids of Clostridium difficile

The emergence of hypervirulent resistant strains have made Clostridium difficile a notorious nosocomial pathogen and has resulted in a renewed interest in preventive strategies, such as vaccines based on (synthetic) cell wall antigens. Recently, the structure of the lipoteichoic acid (LTA) of this species has been elucidated. Additionally, this LTA was found to induce the formation of protective antibodies against C. difficile in rabbits and mice. The LTA from C. difficile is isolated as a microheterogenous mixture, differing in size and composition, impeding any structure–activity relationship studies. To ensure reliable biological results, pure and well‐defined synthetic samples are required. In this work the total synthesis of LTAs from C. difficile with defined chain length is described and the initial biological results are presented.     

Titania-coated monolithic silica as separation medium for high performance liquid chromatography of phosphorus-containing compounds

A method of preparing titania-coated monolithic silica stationary phase has been developed to achieve liquid chromatographic separation of phosphorus-containing compounds, which have recently been attracting increasing attention in biochemical research. The titania-coated silica columns exhibited efficient separation with low pressure drop, which is a typical feature of monolithic structures, and also possessed phospho-selectivity, which is a unique property of the titania surface. The material characteristics of titania-coated monolithic silica were examined, and then resin-clad columns were applied to the HPLC analysis of phosphorylated compounds. Highly efficient separation of phosphorylated substances indicated that the novel titania-coated monolithic silica column will find applications as a useful tool in the field of biochemistry, especially in post-genomic analyses.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Ionic liquid as a green catalytic reaction medium for esterifications

Esterifications of alcohols with carboxylic acids in the room temperature ionic liquid 1-butylpyridinium chloride–aluminium(III) chloride as green reaction medium in catalytic quantities have been investigated. Excellent conversion and selectivities were achieved, and the most of resultant esters could be easily recovered due to immiscibility with the ionic liquid.     

Specific peptides as alternative to antibody ligands for biomagnetic separation of Clostridium tyrobutyricum spores

Nowadays, the reference method for the detection of Clostridium tyrobutyricum in milk is the most-probable-number method, a very time-consuming and non-specific method. In this work, the suitability of the use of superparamagnetic beads coated with specific antibodies and peptides for bioseparation and concentration of spores of C. tyrobutyricum has been assessed. Peptide or antibody functionalized nanoparticles were able to specifically bind C. tyrobutyricum spores and concentrate them up to detectable levels. Moreover, several factors, such as particle size (200 nm and 1 μm), particle derivatization (aminated and carboxylated beads), coating method, and type of ligand have been studied in order to establish the most appropriate conditions for spore separation. Results show that concentration of spore is favored by a smaller bead size due to the wider surface of interaction in relation to particle volume. Antibody orientation, related to the binding method, is also critical in spore recovery. However, specific peptides seem to be a better ligand than antibodies, not only due to the higher recovery ratio of spores obtained but also due to the prolonged stability over time, allowing an optimal recovery of spores up to 3 weeks after bead coating. These results demonstrate that specific peptides bound to magnetic nanoparticles can be used instead of traditional antibodies to specifically bind C. tyrobutyricum spores being a potential basis for a rapid method to detect this bacterial target.     

Laser fragmentation in liquid medium: a new way for the synthesis of PbTe nanoparticles

Synthesis of PbTe nanoparticles has been performed by pulsed laser fragmentation of PbTe micron-sized powders in distilled water with a Nd:YAG laser. The influence of various experimental parameters (wavelength, treatment duration, and output energy) on the yield of fragmentation, the size and the crystallographic structure of the nanoparticles produced has been investigated. Characterization of the nanopowders was performed by X-ray diffraction analyses and transmission electron microscopy observations. Thanks to a careful control of the synthesis parameters, PbTe nanoparticles with an average diameter close to 6 nm and exhibiting a sharp distribution in size have been produced.     

高效液相色谱法同时测定乙酰丙酮反应液中的乙酰丙酮和丙酮

建立了一种同时检测乙烯酮-丙酮法制乙酰丙酮反应液中乙酰丙酮和丙酮的高效液相色谱法(HPLC)。采用Agilent Eclipse XDB-C18色谱柱,以四氢呋喃-水(15:85, v/v)溶液为流动相(用0.1 mol/L磷酸二氢钠缓冲盐调节pH为4.0～5.0),流速0.6 mL/min,紫外检测波长270 nm,采用外标法定量。在优化的条件下,乙酰丙酮和丙酮的线性范围分别为0.01～50.00 mg/L和0.01～30.00 mg/L,相关系数均为0.9999以上。使用HPLC测定乙酰丙酮和丙酮的含量,其相对标准偏差均小于1.0%,结果表明方法的重复性好;反应液中添加乙酰丙酮和丙酮的加标回收率均为99.00%～101.50%。与应用紫外分光光度法测定乙酰丙酮的结果相比,平均相对误差为1.48%。所建立的方法为用丙酮生产乙酰丙酮等类似混合体系中乙酰丙酮的定量分析提供了依据,同时为酮类化合物的测定提供了准确、便捷的方法。     

Electrophoretic mobility of a liquid drop in a salt-free medium

A theory is proposed for the electrophoretic mobility mu of dilute spherical liquid drops of radius a in salt-free media containing only counterions (e.g., nonaqueous media). As in the case of the electrophoretic mobility of rigid particle in salt-free media, there is a certain critical value of the drop surface charge separating two cases, that is, the low-surface-charge case and the high-surface-charge case. For the low-surface-charge case, mu coincides with that of a drop in an electrolyte solution in the limit of very low electrolyte concentrations kappaa-->0 (Hückel's limit), where kappa is the Debye-Hückel parameter. For the high-surface-charge case, however, mu becomes constant independent of the drop surface charge, since the counterion condensation takes place near the drop surface.     

Progress toward developing a carbohydrate-conjugate vaccine against Clostridium difficile ribotype 027: synthesis of the cell-surface polysaccharide PS-I repeating unit

Clostridium difficile strain ribotype 027 is a hypervirulent pathogen that is responsible for recent, severe outbreaks of serious nosocomial infections. As a foundation for the development of a preventative carbohydrate-based vaccine, we have synthesized a pentasaccharide cell wall repeating unit from PS-I unique to this strain, by the linear assembly of four monosaccharide building blocks.     

高效液相色谱法测定不同产地枇杷叶中的3种黄酮类成分

建立了高效液相色谱同时测定枇杷叶中3种黄酮类成分的分析方法。该方法分析了不同产地枇杷叶中芦丁、槲皮素和山柰酚的含量差异。枇杷叶粉末用甲醇超声提取后,加盐酸回流,制备样品测试液。采用Diamonsil C18色谱柱（250 mm×4.6 mm,5 μm）,以0.4%（v/v）磷酸水溶液-乙腈为流动相,梯度洗脱。分别对7个不同产地的枇杷叶样品中的芦丁、槲皮素和山柰酚进行测定。结果表明,芦丁、槲皮素、山柰酚在各自的质量浓度范围内线性关系良好（r>0.99）,加标回收率分别为96.33%、95.81%和95.80%,RSD分别为6.48%、0.90%和3.02%。该方法操作简单、分离度好、重复性高。不同产地枇杷叶中3种黄酮类成分的含量存在差异,其中芦丁的差异最大,而山柰酚的含量最稳定且在不同产地样品中均可检出,或可用作枇杷叶药材质量控制的标志成分。     

Rational design of inhibitors and activity-based probes targeting Clostridium difficile virulence factor TcdB

Clostridium difficile is a leading cause of nosocomial infections. The major virulence factors of this pathogen are the multi-domain toxins TcdA and TcdB. These toxins contain a cysteine protease domain (CPD) that autoproteolytically releases a cytotoxic effector domain upon binding intracellular inositol hexakisphosphate. Currently, there are no known inhibitors of this protease. Here, we describe the rational design of covalent small molecule inhibitors of TcdB CPD. We identified compounds that inactivate TcdB holotoxin function in cells and solved the structure of inhibitor-bound protease to 2.0??. This structure reveals the molecular basis of CPD substrate recognition and informed the synthesis of activity-based probes for this enzyme. The inhibitors presented will guide the development of therapeutics targeting C. difficile, and the probes will serve as tools for studying the unique activation mechanism of bacterial toxin CPDs.     

Development of a method for high LET irradiation of liquid systems

A variety of processes, from material sterilization and cancer treatment to used nuclear fuel recycling, benefit from quantifying the sensitivity of the system to radiation. Determining the effects of alpha irradiation on a system may be of complementary interest to the effects of gamma irradiation, as alpha radiation has higher linear energy transfer (LET) and will likely result in different chemical damage effects. This becomes important in advanced nuclear fuel cycle processes where the radioactive materials to be handled in solutions contain significant amounts of alpha emitters. Here we describe a method for studying high LET radiation in a liquid system using a TRIGA^® reactor and the ¹⁰B(n,α)⁷Li reaction. By fitting a model based on neutron diffusion and absorption to experimentally obtained Fricke dosimetry data, the high LET dose to a sample was predictable over the full range of reactor power available and varying ¹⁰B concentration. This method may be applied to study the effects of high LET radiation on any liquid system as long as a suitable molecule containing boron is used and appropriate neutron diffusion coefficients are known. A wide range of high LET dose rates from <10 Gy/h to >1,000 kGy/h may be obtained with this method.     

Solvent-dependent behavior of arylvinylketones in HUSY-zeolite: a green alternative to liquid superacid medium

Depending on the reaction conditions, arylvinylketones can be directly and efficiently converted using zeolites to indanones by cyclization or to dihydrochalcones through regioselective aryl addition or chemoselective hydride transfer.     

Hydrotalcite catalysis in ionic liquid medium: a recyclable reaction system for heterogeneous Knoevenagel and nitroaldol condensation

Knoevenagel condensation proceeds efficiently in recyclable [bmim]PF₆ and [bmim]BF₄ without any catalyst, and hydrotalcites in ionic liquid serve as a safe and recyclable reaction system for both Knoevenagel as well as nitroaldol condensations.     

Syntheses of new diluents for medium birefringence liquid crystals materials

New liquid crystals of 3HEHV ((4-trans-propyl-cyclohexyl-1), (4?-vinyl-cyclohexyl-1?)-ethane-1,2) and 3HB2V ((4-trans-propyl-cyclohexyl-1), (4-butenyl-3,4)-benzene) were synthesised and evaluated as the diluents for medium birefringence liquid crystal mixtures. The procedures transferring cis-isomers into trans-isomers of the cyclohexane were described. The results showed that both 3HEHV and 3HB2V decrease the crystallisation temperature and the viscosities by doping them with the medium birefringence mixtures in a fraction of 15%. The characteristics of the structures are correlated with the properties of the mixtures.     

Technologies for producing liquid motor fuels from wastes of renewable vegetable resources

The present paper analyzes the trends in the development of motor fuel world market and discusses the prospects for the development of novel technologies for producing fuels from renewable vegetable resources (second-generation fuels derived from raw material of low nutritive value) in Russia and the world. The comparative characteristics of various types of motor fuels are presented and a comparison of the economic possibilities for their production is outlined.     

Electron-transfer studies in a lyotropic columnar hexagonal liquid crystalline medium

We have studied the electron-transfer properties of some redox systems on a gold electrode in a lyotropic hexagonal columnar liquid crystalline phase (H1 phase) using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The liquid crystalline medium consists of the nonionic surfactant Triton X-100 and water. The redox reactions that have been studied are ferrocene/ferricenium, [Fe(CN)6]3-/4-, and [Ru(NH3)6]3+/2+. We have confirmed by polarizing optical microscopy that the liquid crystalline nature of the medium is maintained even after the addition of the redox species and the supporting electrolyte. The CV studies show a significant shift in the half-peak potentials of these redox reactions in the liquid crystalline medium. From the EIS studies, we have measured the diffusion coefficients and the kinetic parameters for the redox species. These results are discussed and compared with the values obtained in the conventional solvent medium. The CV and impedance studies demonstrate that the hexagonal columnar phase provides a novel controlled environment for the study of electron-transfer reactions in biological and physiological media.