使用裂解气相色谱对几种阻燃聚丙烯材料热稳定性及阻燃机理的探讨

用裂解气相色谱（PyGC)考察了经三种类型阻燃剂（含磷、含溴、含溴和磷）改性的聚丙烯的热稳定性。利用PyGC-MS法分析不同样品的高温裂角产物,以此来推测阻燃材料受热分解时气相以及凝聚相所发生的反应,推断阻燃机理,分析影响阻燃效果的因素,为阻燃剂的开发提供有益参考。结果证实,它们都影响聚丙烯的热降解。溴系阻燃剂和磷系阻燃剂是分别从气相阻断、凝固相加速成炭实现阻止燃烧的,而磷-溴型阻燃剂同时具备单纯含磷或者含溴阻燃能力。     

光固化阻燃单体、树脂合成及其阻燃机理研究

本文综述了过去十余年间中国科技大学施文芳教授研究组在光固化阻燃技术领域的工作成果，主要包括活性单体、稀释剂、光固化树脂配方等体系，品类有磷酸酯类单体、含磷丙烯酸酯、超支化丙烯酸酯树脂、膦酸酯类单体和树脂、丙烯酸化环状磷腈、甲基丙烯酸化三聚氰胺、含磷环氧单体等十余种。同时介绍了这些配方体系的合成、性能和应用方法，以及对其热降解、阻燃性能评价和阻燃机理的研究。     

含磷萘基环氧的制备及其固化物的热分析

含磷萘基环氧的制备及其固化物的热分析;环氧;磷;改性;热性质;阻燃     

有机磷系及石墨烯阻燃环氧树脂研究进展

环氧树脂作为一种优异的树脂基体,被广泛地应用于众多领域,但因其极易燃烧,所以常常需要对其进行阻燃处理。本文简要综述了近几年有机磷系化合物及石墨烯阻燃环氧树脂的研究进展,其中有机磷系化合物阻燃部分重点介绍了以阻燃剂中间体9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)及其衍生物和聚磷酸铵(APP)为代表的含磷阻燃剂在环氧树脂中的阻燃机理和阻燃进展;同时也介绍了石墨烯及其衍生物在环氧树脂阻燃领域的最新研究进展,并对其发展前景进行了展望。     

新型侧基含磷共聚酯的合成、表征及性能

以精制对苯二甲酸（TPA）、乙二醇（EG）和含磷反应型阻燃剂9,10-二氢-9-氧杂-10-[2,3-二（2-羟基乙氧基）羰基丙基]-10-磷杂菲-10-氧化物为原料,利用熔融缩聚法合成了含磷量分别为0．35％、0．65％的阻燃聚酯。通过熔融纺丝法将聚酯制成纤维及织物,研究了纤维的染色性能,并通过极限氧指数法和垂直燃烧法研究了织物的阻燃性能。FT-IR和NMR研究结果表明：阻燃共聚酯含磷量为0．35％时,其氧指数（LOI）达31．5％,并无熔滴、烟雾产生,具有优异的阻燃性能和抗熔滴性能。DSC、TG和XPS的研究结果表明：侧基舍磷单元的引入降低了聚酯的Tg和Tm,较低的Tm将有利于材料加工性能的改善;阻燃聚酯侧基上的P-C、P-O键易断裂并挥发至气相中,从而降低了聚酯热稳定性,阻燃聚酯可能以气相阻燃机理为主发挥阻燃作用。此外,含磷共聚酯纤维具有较优异的染色性能。     

有机磷类阻燃剂的合成及应用进展

由于有机磷阻燃剂具有高效、低毒、无污染及无烟等特点,该领域的研究在国内外得到极大的关注,已经在合成和应用等方面取得了显著成就。 本文对磷系阻燃剂的阻燃机理及近年来磷系阻燃剂的应用进展作了简要综述。 分别综述了各类有机含磷阻燃剂的研究进展,并提出了有机磷阻燃剂今后的发展方向。     

磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍,并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

磷系阻燃共聚酯的结构与性能

采用磷系阻燃剂2-羧乙基苯基次磷酸（CEPPA）作为第3单体,通过聚合反应制备了含磷的阻燃共聚酯。采用核磁共振、DSC、元素分析和极限氧指数仪表征阻燃共聚酯的化学组成、序列分布、结晶性能、磷含量和极限氧指数。结果表明：大部分CEPPA单元以无规分布的形式共聚到聚酯分子链中,小部分CEPPA单元以短嵌段的形式共聚在聚酯分子链中,且随着阻燃剂含量增加,无规系数变小。由于分子链的规整性下降,与聚对苯二甲酸乙二酯（PET）相比,阻燃共聚酯的Tg和Tm下降,结晶度减小。随阻燃剂含量的增加,极限氧指数值增加,当阻燃共聚酯中的磷含量达到9．08mg／g时,极限氧指数值达到33％以上。     

含磷/氮/硫协效阻燃剂的合成及对环氧树脂的阻燃作用

本文以DOPO(9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物)、苯甲醛和4,4’-二氨基二苯砜(DDS)为原料,一锅法合成了含磷、氮、硫的化合物PNS。以PNS为阻燃剂,双酚A型树脂DGEBA为基材,DDS为环氧固化剂,制备了阻燃环氧固化物PNS/DGEBA/DDS,研究了PNS对DGEBA阻燃性能的影响,并与商业化有机磷阻燃剂DOPO作对比,同时初步探讨了PNS的阻燃机理。研究结果表明,PNS呈现磷/氮/硫协效阻燃作用,具有比DOPO更优异的残炭生产促进作用、抑烟效果和阻燃作用。在体系磷含量为1.5 wt%时,PNS-1.5/DGEBA/DDS的LOI值高达33.2%,并获UL 94最高阻燃级别V-0级,总烟释放量相较于DOPO-1.5/DGEBA/DDS降低15.4%,DGEBA/DDS降低2.86%,呈现良好的抑烟性能。     

磷自由基对不饱和键的双官能化反应的研究进展

有机膦化合物在有机反应、光电材料、阻燃材料以及药物化学等研究领域都具有广泛的用途,因而探索更高效、更绿色的方法实现有机膦化合物的合成是有机膦化学工作者的主要目标之一.通过磷自由基与不饱和化合物的双官能团化反应可以在一步反应中实现含磷杂环以及多环化合物的构建.按磷自由基引发方式的不同,对近年来磷自由基与不饱和化合物的双官能团化反应的研究进展进行了综述.     

Influence of T31 content on combustion and thermal degradation behaviors on flame-retardant epoxy composites

To study the influence of the T31 content on the combustion properties and thermal degradation behaviors of flame-retardant epoxy composites, a series of flame-retardant epoxy composites were prepared using E-44 epoxy resin as matrix, T31 curing agent as curing agent, and intumescent flame retardant (IFR, based on phosphorus acid, melamine, and pentaerythritol) as flame retardant. The influence of T31 content on combustion behaviors and thermal degradation properties of the flame-retardant epoxy composites were studied using cone calorimeter test (CCT) and thermal-gravimetric analysis (TG), respectively. The cone calorimeter test results indicate that the decrease of T31 can significantly decrease the HRR, THR, SPR, and enhance the char residue of the epoxy composites. EP-4 with 7.0 wt% T31 shows the lowest HRR, SPR and the highest char residue. Furthermore, the TG results indicate that the EP-4 has the highest char residue among all the epoxy composites.     

Thermal and physical properties of flame-retardant epoxy resins containing 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol and cured with dicyanate ester

2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an advancement reaction with the diglycidyl ether of bisphenol-A epoxy (DGEBA) resin at various stoichiometric ratios. DOPONQ-containing advanced epoxy was separately cured with various dicyanate esters to form flame-retardant epoxy/cyanate ester systems. The effect of the phosphorus content and dicyanate ester structure on the curing characteristic, glass transition temperature, dimensional stability, thermal stability, flame retardancy, and dielectric property was studied and compared with that of the control advanced bisphenol-A epoxy system. The DOPONQ-containing epoxy/cyanate ester systems exhibited higher glass transition temperatures as well as better thermal dimensional and thermal degradation stabilities. The flame retardancy of the phosphorus-containing epoxy/dicyanate ester system increased with the phosphorus content, and a UL-94 V-0 rating could be achieved with a phosphorus content as low as 2.1%.     

DOPO基膦酸铝盐的制备及其阻燃环氧树脂的性能研究

以10-羟基-9-氧杂-10-磷杂菲-10-氧化物(DOPO-OH)和六水合氯化铝为原料合成了一种DOPO基膦酸铝盐(DOPO-Al)阻燃剂,通过红外光谱、扫描电镜、能谱、核磁共振磷谱和热失重表征了其结构,并制备了DOPO-Al阻燃的环氧树脂,通过极限氧指数、锥形量热、热失重和差示扫描量热测试分析了该树脂的阻燃和热性能。结果表明,DOPO-Al为高温阻燃剂,其初始热分解温度(T_5%)高达595.5℃。DOPO-Al能提高环氧树脂的阻燃性能和耐热性。当DOPO-Al添加量为7.5%(wt)时,环氧树脂的LOI值由24.1%提高至31.3%;在燃烧过程中,使其热释放速率峰值、平均热释放速率、总热释放、总烟释放和总烟产量均降低,使残留物增加幅度高达135%。炭层分析表明DOPO-Al存在凝聚相阻燃机理。环氧树脂的T_5%和玻璃化转变温度分别高达368.9℃和161.8℃,所制备阻燃环氧树脂具有较好的热性能。     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

Synthesis and thermal characterization of phosphorus containing siliconized epoxy resins

Siliconized epoxy matrix resin was developed by reacting diglycidyl ethers of bisphenol A (DGEBA) type epoxy resin with hydroxyl terminated polydimethylsiloxane (silicone) modifier, using γ-aminopropyltriethoxysilane crosslinker and dibutyltindilaurate catalyst. The siliconized epoxy resin was cured with 4, 4-diaminodiphenylmethane (DDM), 1,6-hexanediamine (HDA), and bis (4-aminophenyl) phenylphosphate (BAPP). The BAPP cured epoxy and siliconized epoxy resins exhibit better flame-retardant behaviour than DDM and HDA cured resins. The thermal stability and flame-retardant property of the cured epoxy resins were studied by thermal gravimetric analysis (TGA) and limiting oxygen index (LOI). The glass transition temperatures (T_g) were measured by differential scanning calorimetry (DSC) and the surface morphology was studied by scanning electron microscopy (SEM). The heat deflection temperature (HDT) and moisture absorption studies were carried out as per standard testing procedure. The thermal stability and flame-retardant properties of the cured epoxy resins were improved by the incorporation of both silicone and phosphorus moieties. The synergistic effect of silicone and phosphorus enhanced the limiting oxygen index values, which was observed for siliconized epoxy resins cured with phosphorus containing diamine compound.     

环三磷腈类阻燃剂的合成及应用研究进展

简要介绍了制备环三磷腈类阻燃剂所需起始原料六氯环三磷腈的合成方法、合成及取代反应机理;介绍了环三磷腈阻燃剂的阻燃机理;着重阐述了近20年间反应型的羟基/氨基环三磷腈、环氧基环三磷腈、含不饱和双键的环三磷腈、羧基环三磷腈阻燃剂,以及添加型烷氧基环三磷腈、芳氧基环三磷腈的合成及阻燃应用,同时综述了其应用材料的热稳定性能和阻燃性能,并对其发展趋势作了总结和展望。     

Flame-retardant modification of UV-curable resins with monomers containing bromine and phosphorus

UV-curable urethane acrylate resin and oligoester acrylate resin have been effectively flame retarded with vinyl-type flame-retardant monomers containing both bromine and phosphorus atoms. Thermogravimetric analysis indicates that the decomposition temperature of flame-retardant monomer is more closely matched to the decomposition temperature of cured oligoester acrylate resin than to that of cured urethane acrylate resin. The efficiency of each flame-retardant monomer in oligoester acrylate resin is higher than in urethane acrylate resin by a factor of ～ 2.2. The individual and the combined effects of tribromophenyl acrylate and triphenyl phosphate on the oxygen index of UV curable urethane acrylate resin have been studied. The bromine phosphorus synergistic action of the two flame-retardant components is evaluated quantitatively, and a maximum intermolecular bromine phosphorus synergism was observed in a flame-retarded formulation containing a Br/P atom ratio of 2. In the three acrylic monomers containing both bromine and phosphorus atoms, the optimum intramolecular bromine phosphorus synergism was observed at a monomer also containing a Br/P atom ratio of 2.     

A novel flame retardant containing phosphorus,nitrogen, and sulfur

In this article, a novel intumescent flame retardant (IFR) PNSFR containing three flame-retardant elements, phosphorus, nitrogen, and sulfur was designed and synthesized. Then a series of flame-retardant thermoplastic polyurethanes (TPU) were prepared using the PNSFR. The effects of the flame retardant on the flammability of TPU/PNSFR composites were investigated by limited oxygen index (LOI) and UL-94 vertical burning. The results showed that TPU containing 10 mass% PNSFR had the highest LOI value (36) and could reach the V-0 rating. The flame-retardant mechanism of PNSFR in TPU was also disclosed using thermogravimetric analysis (TG), scanning electron micrograph, TG-infared spectrometry, and Fourier transform infrared spectroscopy. The sulfur and phosphorus elements of PNSFR can be kept in residual char. Moreover, an optimal loading amount of the IFR in TPU is in favor of forming dense and continuous char layer to prevent heat transfer and the spread of flammable gases. The IFR PNSFR may find potential use for various flame-retardant polyurethanes.     

Influence of oxidation state of phosphorus on the thermal and flammability of polyurea and epoxy resin

The focus of this study is an investigation of the effect of oxidation state of phosphorus in phosphorus-based flame retardants on the thermal and flame retardant properties of polyurea and epoxy resin. Three different oxidation states of phosphorus (phosphite, phosphate and phosphine oxide) additives, with different thermal stabilities at a constant phosphorus content (1.5 wt.%) have been utilized. Thermal and flame retardant properties were studied by TGA and cone calorimetry, respectively. The thermal stability of both polymers decreases upon the incorporation of phosphorus flame retardants irrespective of oxidation state and a greater amount of residue was observed in the case of phosphite. Phosphate was found to be better flame retardant in polyurea, whereas phosphite is suitable for epoxy resin. Phosphite will react with epoxy resin by trans-esterification, which is demonstrated by FTIR and ³¹P NMR. Further, TG–FTIR and XPS studies also provide information on flame retardancy of both polymers with phosphorus flame retardants.