Tuning the gas phase redox properties of copper(II) ternary complexes of terpyridines to control the formation of nucleobase radical cations

Electrospray ionization (ESI) tandem mass spectrometry (MS/MS) of ternary copper(II) complexes of [Cu(terpyX)(M)]2+ (where terpyX = is a substituted 2,2':6',2'-terpyridine ligand; M = the nucleobases: adenine, guanine, thymine and cytosine) was examined as a means of forming radical cations of nucleobases in the gas phase. The following substituents were examined: 4'-NMe2-2,2':6',6'-terpyridine; 4'-OH-2,2':6',6'-terpyridine; 4'-F-2,2':6',6'-terpyridine; 2,2':6',6'-terpyridine; 4'-Cl-2,2':6',6'-terpyridine; 4'-Br-2,2':6',6'-terpyridine; 4'-CO2H-2,2':6',6'-terpyridine; 4'-NO2-2,2':6',6'-terpyridine and 6,6'-dibromo-2',2:6',2'-terpyridine. Each of the ternary complexes [Cu(terpyX)(M)]2+ was mass selected and subjected to collision induced dissociation (CID) in a quadrupole ion trap. The types of fragmentation reactions observed for these complexes depend on the nature of the substituent on the terpyridine ligand, while the yields of the radical cations of the nucleobases follow the order of their ionization energies (IEs): G (lowest IE) > A > C > T (highest IE). In general, radical cation formation is favoured for electron withdrawing substituents (e.g. NO2) while loss of the neutral nucleobase is favoured for electron donating substituents (e.g. NMe2). Loss of the protonated nucleobase is a major fragmentation pathway for the OH substituted terpyridine system, consistent with its ability to bind to a metal centre as a deprotonated ligand. Crystal structure determinations of (6,6'-dibromo-2',2:6',2'-terpyridine)bis(nitrato)copper(II) and diaqua(4'-oxo-2,2':6',6'-terpyridine)copper(II) nitrate monohydrate were performed and correlated with the ESI results.     

Synthesis and computational studies of Mg complexes supported by 2,2':6,2'-terpyridine ligands

The reactions of the substituted 2,2':6,2'-terpyridine ligands, 4'-mesityl-2,2':6',2'-terpyridine (mesitylterpy) (1a), 4,4',4'-tri-tert-butyl-2,2':6',2'-terpyridine (tri-(t)Buterpy) (1b) and 4'-phenyl-2,2':6',2'-terpyridine (phenylterpy) (1c) with Grignard reagents were investigated. When half an equivalent of mesitylterpy or tri-(t)Buterpy were treated with MeMgBr in diethyl ether, the only products were (R-terpy)MgBr(2) (R = mesityl (5a), or tri-(t)Bu (5b)) and Me(2)Mg and a similar reaction was observed in THF. Compounds 5a and 5b were characterized by X-ray crystallography. Changing the Grignard reagent to PhMgBr also generated 5a and 5b along with Ph(2)Mg, while the reaction between MeMgCl or PhMgCl and 1a or 1b generated (R-terpy)MgCl(2) (R = mesityl (6a), or tri-(t)Bu (6b)) and either Me(2)Mg or Ph(2)Mg, respectively. The products from reactions between phenylterpy (1c) and Grignard reagents were highly insoluble and could not be fully characterized but appeared to be the same as those from reactions with 1a and 1b. In contrast to other studies using tridentate nitrogen ligands, which formed either mixed halide alkyl species or dihalide and bis(alkyl) species depending on whether the Grignard reagent was reacted with the ligand in diethyl ether or THF, the formation of mixed halide, alkyl complexes of the type (R-terpy)MgR'X (R' = Me or Ph; X = Cl or Br) or dialkyl species such as (R-terpy)MgR'(2) (R' = Me or Ph) was not observed here, regardless of the reaction conditions. DFT studies were performed to complement the experimental studies. The experimental results could not be accurately reproduced unless π-stacking effects associated with free terpyridine were included in the model. When these effects were included, the calculations were consistent with the experimental results which indicated that the formation of the terpy Mg dihalide species and R'(2)Mg (R' = Me or Ph) is thermodynamically preferred over the formation of mixed alkyl halide Mg species. This is proposed to be due to the increased steric bulk of the terpy ligand in the coordination plane, compared with other tridentate nitrogen donors.     

Ligand substituent effect observed for ytterbocene 4'-cyano-2,2':6',2' '-terpyridine

A new N-heterocyclic complex of ytterbocene (Cp(2)Yb(II), Cp = C(5)Me(5)) has been prepared by the addition of 4'-cyano-2,2':6',2' '-terpyridine (tpyCN) to Cp(2)Yb(II)(OEt(2)) in toluene to give a dark blue species designated as Cp(2)Yb(tpyCN). The effect of the electron-withdrawing group (-CN) on the redox potentials of the charge-transfer form of this complex [in which an electron is transferred from the f(14) metal center to the lowest unoccupied (pi) molecular orbital of the tpyCN ligand to give a 4f(13)-pi(1) electronic configuration] has been quantified by cyclic voltammetry. The tpyCN ligand stabilizes this configuration by 60 mV more than that in the unsubstituted tpy ligand complex and by 110 mV more than that in the unsubstituted bpy ligand complex. Magnetic susceptibility measurements corroborate the enhanced stabilization of the 4f(13)-pi(1) configuration by the substituted terpyridyl ligand complex. Furthermore, the temperature dependence of the magnetic data is most consistent with a thermally induced valence tautomeric equilibrium between this paramagnetic 4f(13)-pi(1) form that dominates near room temperature and the diamagnetic 4f(14)-pi(0) form that dominates at low temperature. Differing coordination modes for the tpyCN ligand to the ytterbocene center have also been confirmed by isolation and X-ray crystallographic characterization of complexes binding through either the cyano nitrogen of tpyCN or the three terpyridyl nitrogen atoms of tpyCN.     

Synthesis of soluble bis-terpyridine ligands bearing ethynylene-phenylene spacers

Soluble and rigid terpyridine-based ditopic ligands bearing one to five phenylene/ethynylene modules have been synthesized by way of a stepwise procedure. Each module is attached to the terpyridine unit via an ethynylene fragment and functionalized at the 4-position with an additional ethynylene connector and in the 2,5-positions with two flexible dodecyloxy chains. The synthetic protocol is based on sequential Pd(0)-catalyzed cross-coupling reactions between a terpyridine subunit grafted with the necessary diethynyl/phenyl or ethynylphenyl/bromide appendage. For ditopic ligands displaying an even number of phenyl/ethynylene modules, the final step involves a single cross-coupling reaction between 4'-ethynylene-2,2':6',6' '-terpyridine and the appropriate bromo derivative. In the case of the ligands having an odd number of phenylene/ethynylene fragments, a double cross-coupling reaction between an extended dibromopolyphenylene intermediate and 4'-ethynylene-2,2':6',6' '-terpyridine or 1-(4'-ethynylene-2,2':6',2' '-terpyridine)-4-ethynylene-2,5-didodecyloxy-benzene is required. For ligands I-V, optimal preparative conditions were found with [Pd(0)(PPh(3))(4)] (6 mol %) in n-propylamine at 70 degrees C. Oxidative dimerization of the 1-(4'-ethynylene-2,2':6',2' '-terpyridine)-4-ethynylene-2,5-didodecyloxybenzene derivative in the presence of cupric salts and oxygen gives the corresponding homoditopic ligand II(2)() bearing a central diphenyldiacetylene spacer. Spectroscopic data for the new oligomers are discussed in terms of the extent of pi-electron conjugation. Upon increasing the number of phenylene/ethynylene modules, there is a progressive lowering in energy of absorption and fluorescence transitions.     

Cyclometalated ruthenium(II) complexes with a bis-carbene CCC-pincer ligand

The first series of cyclometalated ruthenium complexes with a CCC-pincer bis-carbene ligand have been obtained as bench-stable compounds. Single-crystal X-ray analysis of one of these complexes with 4'-di-p-anisylamino-2,2':6',2'-terpyridine is presented. The Ru(II/III) redox potentials and MLCT absorptions of these complexes can be varied by attaching an electron-donating or -withdrawing group on the noncyclometalating ligand.     

A platinum-ruthenium dinuclear complex bridged by bis(terpyridyl)xanthene

4,5-Bis(terpyridyl)-2,7-di-tert-butyl-9,9-dimethylxanthene (btpyxa) was prepared to serve as a new bridging ligand via Suzuki coupling of terpyridin-4'-yl triflate and 2,7-di-tert-butyl-9,9-dimethylxanthene-4,5-diboronic acid. The reaction of btpyxa with either 1 equiv or an excess of PtCl(2)(cod) (cod = 1,5-cyclooctadiene) followed by anion exchange afforded mono- and dinuclear platinum complexes [(PtCl)(btpyxa)](PF(6)) ([1](PF(6))) and [(PtCl)(2)(btpyxa)](PF(6))(2) ([2](PF(6))(2)), respectively. The X-ray crystallography of [1](PF(6)).CHCl(3) revealed that the two terpyridine units in the ligand are nearly parallel to each other. The heterodinuclear complex [(PtCl)[Ru((t)Bu(2)SQ)(dmso)](btpyxa)](PF(6))(2) ([4](PF(6))(2)) (dmso = dimethyl sulfoxide; (t)Bu(2)SQ = 3,5-di-tert-butyl-1,2-benzosemiquinone) and the monoruthenium complex [Ru((t)Bu(2)SQ)(dmso)(trpy)](PF(6)) ([5](PF(6))) (trpy = 2,2':6',2' '-terpyridine) were also synthesized. The CV of [2](2+) suggests possible electronic interaction between the two Pt(trpy) groups, whereas such an electronic interaction was not suggested by the CV of [4](2+) between Pt(trpy) and Ru((t)Bu(2)SQ) frameworks.     

Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

Functionalized platinum(II) terpyridyl alkynyl complexes as colorimetric and luminescence pH sensors

A series of platinum(II) terpyridyl alkynyl complexes that have been derivatized with basic amino functionalities, [Pt(tpy)(C[triple bond]C-C6H4-NR2-4]X (X = OTf-, R = CH3 1, R = CH2CH2OCH3 2, R = H 3; X = Cl-, R = CH3 4, R = CH2CH2OCH3 5, R = H 6) (tpy = 2,2':6',2' '-terpyridine), have been synthesized and characterized. Their photophysical responses at various acid concentrations were studied. The abilities of the complexes to function as colorimetric and luminescence pH sensors were demonstrated with dramatic color changes and luminescence enhancement upon introduction of acid.     

Electrochemical probing of ground state electronic interactions in polynuclear complexes of a new heteroditopic ligand

The synthesis and electronic properties of dinuclear ([(bipy)2Ru(I)M(terpy)][PF6]4(bipy = 2,2'-bipyridine, terpy = 2,2':6',2'-terpyridine; M = Ru, Os)) and trinuclear ([[(bipy)2Ru(I)]2M][PF6]6 M = Ru, Os, Fe, Co) complexes bridged by 4'-(2,2'-bipyridin-4-yl)-2,2':6',2'-terpyridine (I) have been investigated and are compared with those of mononuclear model complexes. The electrochemical analysis using cyclic voltammetry and differential pulse voltammetry reveals that there are no interactions in the ground state between adjacent metal centres. However, there is strong electronic communication between the 2,2'-bipyridine and 2,2':6',2'-terpyridine components of the bridging ligand. This conclusion is supported by a step-by-step reduction of the dinuclear and trinuclear complexes and the assignment of each electrochemical process to localised ligand sites within the didentate and terdentate domains. The investigation of the electronic absorption and emission spectra reveals an energy transfer in the excited state from the terminating bipy-bound metal centres to the central terpy-bound metal centre. This indicates that the bridge is able to facilitate energy transfer in the excited state between the metal centres despite the lack of interactions in the ground state.     

Nitrene transfer reactions catalyzed by gold complexes

We report here the first gold-catalyzed nitrene transfer reaction. A gold(I) compound, supported by 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine (tBu3tpy) as the ligand, efficiently catalyzes olefin aziridination with the use of the commercially available oxidant PhI(OAc)2 and sulfonamides. This system also mediates carbene insertion into benzene.     

Synthesis and properties of the elusive ruthenium(II) complexes of 4'-cyano-2,2':6',2' '-terpyridine

The heteroleptic and homoleptic ruthenium(II) complexes of 4'-cyano-2,2':6',2' '-terpyridine are synthesized by palladium catalyzed cyanation of the corresponding Ru(II) complexes of 4'-chloro-2,2':6',2' '-terpyridine. The introduction of the strongly electron-withdrawing cyano group into the Ru(tpy)(2)(2+) moiety dramatically changes its photophysical and redox properties as well as prolongs its room temperature excited-state lifetime.     

From encapsulation to polypseudorotaxane: unusual anion networks driven by predesigned metal bis(terpyridine) complex cations

Solvothermal reactions of CuSCN, metal (Mn2+, Fe2+, Co2+, Ni2+, Cu2+) sulfate, and terpyridine (2,2':6',2' '-terpyridine or 4'-p-tolyl-2,2':6',2' '-terpyridine) in the presence of triphenylphosphine yielded a series of hybrid coordination compounds, in which in situ formed metal bis(terpyridine) complex cations are encapsulated by a 3D anionic network or entangled by 2D heartlike networks, forming encapsulation or polypseudorotaxane supramolecules. The complex cations play a role as template to direct the fabrication of the structures.     

The d10 route to dye-sensitized solar cells: step-wise assembly of zinc(II) photosensitizers on TiO2 surfaces

Dye-sensitized solar cells have been assembled using a sequential approach: a TiO(2) surface was functionalized with an anchoring ligand, followed by metallation with Zn(OAc)(2) or ZnCl(2), and subsequent capping with a chromophore functionalized 2,2':6',2'-terpyridine; the DSCs exhibit surprisingly good efficiencies confirming the effectiveness of the new strategy for zinc-based DSC fabrication.     

Self-assembled monolayers of Ru/Os dinuclear complexes: probing monolayer structure and interaction energies by electrochemical means

Monolayers of [Ru(bpy)2(micro-1)M2][PF6]4 salts (M = Os, Ru; bpy = 2,2'-bipyridine, 1 = 4'-(2,2'-bipyridin-4-yl)-2,2':6',2' '-terpyridine, tpy = 2,2':6',2' '-terpyridine, and 2 = 4'-(4-pyridyl)-2,2':6',2' '-terpyridine) were self-assembled on platinum and investigated by fast-scan electrochemistry. The electrochemistry of the complexes in solution and confined to the surface in self-assembled monolayers (SAMs) exhibited an almost ideal behavior. Scan-rate-dependent measurements of the peak current density (jp) were used to determine interaction energies within the monolayer. It is shown that the tpy coordination sites of the dinuclear complexes interact more strongly within the SAM than the bipyridine-coordinated fragments. This result was supported by peak potential shifts, which are due to interaction forces in SAMs. The alignment of the rodlike complexes relative to the surface is discussed, and the results of molecular mechanics calculations indicate that the species adopt a tilted orientation.     

Synthesis, characterization and electrochemistry of 4'-functionalized 2,2':6',2'-terpyridine ruthenium(II) complexes and their biological activity

The synthesis and characterization of Ru(II) terpyridine complexes derived from 4'-functionalized 2,2':6',2'-terpyridine ligands by a multi step procedure have been described. The complexes are redox-active, showing both metal-centred (oxidation) and ligand-centred (reduction) processes. The antibacterial and antifungal activity of the synthesized ruthenium(II) complexes [Ru(attpy)2](PF6)2 (attpy = 4'-(4-acryloyloxymethylphenyl)-2,2':6',2'-terpyridine); [Ru(mttpy)2](PF6)2 (mttpy = 4'-(4-methacryloyloxymethylphenyl)-2,2':6',2'- terpyridine); [Ru(mttpy)(MeOPhttpy)](PF6)2 (MeOPhttpy = 4'-(4-methoxyphenyl)-2,2':6',2'-terpyridine); and [Ru(mttpy)(ttpy)](PF6)2 (ttpy = 4'-(4-methylphenyl)-2,2':6',2'-terpyridine) were tested against four human pathogens (Proteus vulgaris, Proteus mirabilis, Pseudomonas aeruginosa and Escherichia coli) and five plant pathogens (Curvularia lunata, Fusarium oxysporum, Fusarium udum, Macrophomina phaseolina and Rhizoctonia solani) by the well diffusion method and MIC values of the complexes are reported. A biological study of the complexes indicated that the complexes [Ru(mttpy)2](PF6)2 and [Ru(mttpy)(MeOPhttpy)](PF6)2 exhibit very good activity against most of the test pathogens and their activity is better than those of some of the commercially available antibiotics like tetracycline and the fungicide carbendazim.     

Bi- and terpyridyl platinum(II) chloro complexes: molecular catalysts for the photogeneration of hydrogen from water or simply precursors for colloidal platinum?

Platinum(II) bi- and terpyridyl chloro complexes, Pt(dcbpy)Cl2 and [Pt(ttpy)Cl]+, where dcbpy = 4,4'-dicarboxyl-2,2'-bipyridine and ttpy = 4-tolyl-2,2':6',2'-terpyridine, are used to investigate the nature of the active catalyst for the photocatalytic production of hydrogen from water. In a Pt(II) chloro system that contains a sacrificial electron donor, either MeOH or triethanolamine (TEOA), and titanium dioxide (TiO2) as an electron relay, sizable amounts of H2 can be observed upon UV bandgap irradiation. The quantity of H2 can be significantly reduced in the presence of mercury under the same conditions. Using a known sensitizer, [Pt(ttpy)(phenylacetylide)]+ (1), combined with a Pt(II) chloro complex in a similar system, there is a substantial induction period until the evolution of H2, under visible light (lambda > 410 nm) irradiation. It is suggested that the Pt(II) chloro complexes are simply acting as precursors to Pt colloids that function as the H2 generating catalyst     

Highly active and tunable catalysts for O2 evolution from water based on mononuclear ruthenium(II) monoaquo complexes

The catalytic activity of [Ru(tpy)(bpy)OH(2)](2+) (tpy = 2,2':6',2'-terpyridine and bpy = 2,2'-bipyridine) increased by a 4'-substituted ethoxy group on the tpy ligand by more than one order of magnitude to give 1.1 × 10(-1) s(-1) of catalyst turnover frequency, which is comparable with the hitherto-reported champion data.     

An outer-sphere two-electron platinum reagent

A strategy for designing cooperative outer-sphere two-electron platinum reagents is demonstrated. The novel platinum(II) complex, [Pt(tpy)(pip2NCN)][BF4] (1(BF4-)) (tpy = 2,2':6',2' '-terpyridine, pip2NCN- = 2,6-(CH2N(CH2)5)2-C6H3-), in which the metal is bonded to two pincer type ligands, has been prepared. Treatment of 1 with protic acid results in protonation of the pendant piperdyl groups, allowing for the isolation of [Pt(tpy)(pip2NCNH2)][PF6]3 (2(PF6-)3). 1H NMR spectra of 1 and 2 establish that in each complex the terpyridyl ligand is tridentate, whereas the piperdyl ligand is monodentate, bonded to platinum through the phenyl ring. The structure of the protonated complex was confirmed by an X-ray crystallographic study of crystals of 2(Cl-)3.4H2O. The cyclic voltammagram of 1 exhibits two reversible one-electron reduction waves at E degrees ' = -0.98 V and E degrees ' = -1.50 V (E degrees ' = (Epc + Epa)/2), with a DeltaEp of 65 and 61 mV, respectively. In contrast to other Pt(II) complexes, including 2, this complex also undergoes a nearly reversible two-electron oxidation process at E degrees ' = 0.40 V (DeltaEp = 43 mV, 0.01 V/s). The accumulated data are consistent with the unusual ligand architecture of 1 being capable of stabilizing and allowing for facile interconversion between the Pt(II) and Pt(IV) oxidation states.     

Reversible luminescence switching in a ruthenium(II) bis(2,2':6',2'-terpyridine)-benzoquinone dyad

An electroactive luminescent switch has been synthesized that comprises a hydroquinone-functionalized 2,2':6',2'-terpyridine ligand coordinated to a ruthenium(II) (4'-phenylethynyl-2,2':6',2'-terpyridine) fragment. The assembly is sufficiently rigid that the hydroquinone-chromophore distance is fixed. Excitation of the complex via the characteristic metal-to-ligand charge-transfer (MLCT) absorption band produces an excited triplet state in which the promoted electron is localized on the terpyridine ligand bearing the acetylenic group. The triplet lifetime in butyronitrile solution at room temperature is 46 +/- 3 ns but increases markedly at lower temperature. Oxidation of the hydroquinone to the corresponding benzoquinone switches on an electron-transfer process whereby the MLCT triplet donates an electron to the quinone. This reaction reduces the triplet lifetime to 190 +/- 12 ps and essentially extinguishes emission. The rate of electron transfer depends on temperature in line with classical Marcus theory, allowing calculation of the electronic coupling matrix element and the reorganization energy as being 22 cm(-1) and 0.84 eV, respectively. The switching behavior can be monitored using luminescence spectroelectrochemistry. The on/off level is set by temperature and increases as the temperature is lowered.     

Synthesis and redox behavior of biferrocenyl-functionalized ruthenium(II) terpyridine gold clusters

Spectroscopic and electrochemical characterizations of ferrocene- and biferrocene-functionalized terpyridine octanethiolate monolayer-protected clusters were investigated and reported. The electrochemical measurements of Ru2+ coordinated with 4'-ferrocenyl-2,2':6',2' '-terpyridine and 4'-biferrocenyl-2,2':6',2' '-terpyridine complexes were dominated by the Ru2+/Ru3+ redox couple (E(1/2) at approximately 1.3 V), Fe(2+)/Fe(3+) redox couples (E(1/2) from approximately 0.6 to approximately 0.9 V), and terpy/terpy-/terpy2- redox couples (E(1/)(2) at ca. -1.2 and ca. -1.4 V). The substantial appreciable variations detected in the Ru2+/Ru3+ and Fe2+/Fe3+ oxidation potentials indicate that there is an interaction between the Ru2+ and Fe2+ metal centers. The coordination of the Ru2+ metal center with 4'-ferrocenyl-2,2':6',2' '-terpyridine and 4'-biferrocenyl-2,2':6',2' '-terpyridine leads to an intense 1[(d(pi)Fe)6] --> 1[d(pi)Fe)5(pi*terpyRu)1] transition in the visible region. The 1[(d(pi)Fe)6] -->1[d(pi)Fe)5(pi*terpyRu)1] transition observed at approximately 510 nm revealed that there was a qualitative electronic coupling between metal centers. The coordination of the Ru2+ transition metal center lowers the energy of the pi*terpy orbitals, causing this transition.