Acetylene on Cu(111): imaging a molecular surface arrangement with a constantly rearranging tip

Acetylene on Cu(111) is investigated by scanning tunnelling microscopy (STM); a surface pattern previously derived from diffraction measurements can be validated, if the variation of the STM image transfer function through absorption of an acetylene molecule onto the tip apex is taken into account. Density functional theory simulations point to a balance between short-range repulsive interactions of acetylene/Cu(111) associated with surface stress and longer range attractive interactions as the origin of the ordering.     

Preparing and regulating a bi-stable molecular switch by atomic manipulation

We present a scanning tunneling microscopy (STM) investigation into the influence of the STM tip on the adsorption site switching of polychlorinatedbiphenyl (PCB) molecules on the Si(111)-7?×?7 surface at room temperature. From an initially stable adsorption configuration, atomic manipulation by charge injection from the STM tip prepared a new bi-stable configuration that switched between two bonding arrangements. No switching rate bias dependence was found for +?1.0 to +?2.2?V. Assuming a thermally driven switching process we find that the measured energy barriers to switching are influenced by the exact location of the STM tip by more than 10%. We propose that this energy difference is due the dispersion interaction between the tip and the molecule.     

Image charge effect on the light emission of rutile TiO_2(110) induced by a scanning tunneling microscope

The plasmon-enhanced light emission of rutile TiO_2(110) surface has been investigated by a low-temperature scanning tunneling microscope(STM). We found that the photon emission arises from the inelastic electron tunneling between the STM tip and the conduction band or defect states of TiO_2(110). In contrast to the Au(111) surface, the maximum photon energy as a function of the bias voltage clearly deviates from the linear scaling behavior, suggesting the non-negligible effect of the STM tip on the band structure of TiO_2. By performing differential conductance( dI/dV) measurements, it was revealed that such a deviation is not related to the tip-induced band bending, but is attributed to the image charge effect of the metal tip, which significantly shifts the band edges of the TiO_2(110) towards the Femi level(E_F) during the tunneling process. This work not only sheds new lights onto the understanding of plasmon-enhanced light emission of semiconductor surfaces, but also opens up a new avenue for engineering the plasmon-mediated interfacial charge transfer in molecular and semiconducting materials.     

Local spectroscopy of image-potential-derived states: from single molecules to monolayers of benzene on Cu(111)

Stark-shifted image-potential states were measured with an STM tip for benzene adsorbed on a Cu(111) surface. A single benzene molecule locally shifts the position of the first image state toward the Fermi level by 0.2 eV relative to its position on the clean surface. The energetic position of this molecule-modified state shifts to lower energy with increasing coverage of benzene on the surface. This is attributed to local surface potential changes that are correlated with the lowering of the crystal work function due to adsorption of benzene.     

Mastering the molecular dynamics of a bistable molecule by single atom manipulation

At low temperature (5 K), a single biphenyl molecule adsorbed on a Si(100) surface behaves as a bistable device which can be reversibly switched by electronic excitation with the scanning tunneling microscope tip. Density functional theory suggests that the biphenyl molecule is adsorbed with one dissociated hydrogen atom bonded to a neighbor surface silicon atom. By desorbing this hydrogen atom with the STM tip, the interaction of the molecule with the surface is modified such that it becomes transformed into a multistable device with four stable states having switching yields increased by almost 2 orders of magnitude.     

利用扫描隧道显微镜表征和操纵单分子

扫描隧道显微镜（STM）提供给我们一种表征单分子的局域物理和化学特性的特殊方法，甚至还能帮助我们操纵单分子以构造分子尺度的新型器件。本文中我们采用了两种新型STM技术分别来表征封装在富勒烯笼里面的金属原子和构造一种具有较强Kondo效应的分子器件。空间dI/dV映像谱被用来探索单个Dy@C82分子中能量分辨的金属-笼杂化态，揭示了有关Dy原子在碳笼中的空间位置和Dy-碳笼之间相互作用的重要信息。我们也通过控制STM针尖诱导的高电压脉冲来诱导CoPc分子的边缘脱氢化，从而改变了这个分子在Au(111)表面的吸附构型，导致吸附在Au表面的完整CoPc分子所不具备的Kondo效应产生。     

Signature of tip electronic states on tunneling spectra

The influence of STM tip electronic states on the electron transport through an atomic object on a surface is studied both experimentally and theoretically. We present scanning tunnelling spectroscopy (STS) experimental results on Ag islands with two, blunt and sharp, STM tips. The data taken with the sharp tip have an additional peak at positive bias which corresponds to the tip apex atom state. We show that sudden tip sharpness variation and corresponding I(V) characteristic change may help to differentiate between electronic states of the tip and the sample. The experimental data are discussed and compared with theoretical calculations performed for two different tips. The current and differential conductance calculations are carried out by means of the Green's function technique and a tight-binding Hamiltonian.     

Tip-Pressure-Induced Incoherent Energy Gap in CaFe_2As_2

In CaFe_2As_2,superconductivity can be achieved by applying a modest c-axis pressure of several kbar.Here we use scanning tunneling microscopy/spectroscopy(STM/S) to explore the STM tip pressure effect on single crystals of CaFe_2As_2.When performing STM/S measurements,the tip-sample interaction can be controlled to act repulsive with reduction of the junction resistance,thus to apply a tip pressure on the sample.We End that an incoherent energy gap emerges at the Fermi level in the differential conductance spectrum when the tip pressure is increased.This energy gap is of the similar order of magnitude as the superconducting gap in the chemical doped compound Ca_(0.4)Na_(0.6)Fe_2As_2 and disappears at the temperature well below that of the bulk magnetic ordering.Moreover,we also observe the rhombic distortion of the As lattice,which agrees with the orthorhombic distortion of the underlying Fe lattice.These Endings suggest that the STM tip pressure can induce the local Cooper pairing in the orthorhombic phase of CaFe_2As_2.     

纳腔等离激元对分子上和分子旁边的隧穿电子诱导发光的作用研究

本文使用含时量子主方程,从理论上计算了当分子或者等离激元分别被激发的情形下等离激元-分子耦合体系发光特性的时间和光谱演化,并在此基础上讨论了纳腔等离激元在扫描隧道显微镜（STM）诱导发光中发挥的不同作用.当STM针尖在分子上方,隧穿电子可以直接激发分子时,纳腔等离激元的主要作用是通过提高分子的辐射速率来增强其发光,此时耦合体系表现出具有分子特征的尖锐发光峰.另一方面,当STM针尖非常靠近分子边缘但没有载流子注入直接激发分子时,等离激元-分子之间的相干耦合会在这两个量子客体之间产生相消干涉,导致在分子激子能量附近出现法诺共振,使我们观察到具有法诺凹谷特征的等离激元发光光谱.     

Single molecule vibrationally mediated chemistry

Tunnelling electrons may scatter inelastically with an adsorbate, releasing part of their energy through the excitation of molecular vibrations. The resolution of inelastic processes with a low temperature scanning tunnelling microscope (STM) provides a valuable tool to chemically characterize single adsorbates and their adsorption mechanisms. Here, we present a molecular scale picture of single molecule vibrational chemistry, as resolved by STM. To understand the way a reaction proceed it is needed knowledge about both the excitation and damping of a molecular vibration. The excitation is mediated by the specific coupling between electronic molecular resonances present at the Fermi level and vibrational states of the adsorbate. Thus, the two-dimensional mapping of the inelastic signal with an STM provides the spatial distribution of the adsorbate electronic states (near the Fermi level) which are predominantly coupled to the particular vibrational mode observed. The damping of the vibration follows a competition between different mechanisms, mediated via the creation of electron-hole pairs or via anharmonic coupling between vibrational states. This latter case give rise to effective energy transfer mechanisms which eventually may focus vibrational energy in a specific reaction coordinate. In this single-molecule work-bench, STM provides alternative tools to understand reactivity in the limit of low excitation rate, which demonstrate the existence of state-specific excitation strategies which may lead to selectivity in the product of a reaction.     

The calculation of transition probabilities for atomic oxygen

In this contribution we present scanning tunnelling microscopy (STM) and spectroscopy (STS) investigations on isolated cobalt clusters in contact with Ge(001). Mass-filtered nanoparticles with diameters ranging from 3 to 11 nm are generated using an arc cluster ion source (ACIS) and deposited under soft landing conditions (E_kin/atom < 0.5 eV). Since the tip radius is of the same order as the nanoparticle diameters the recorded STM images are significantly affected by tip folding. By means of the “blind reconstruction method" it is possible to approximate the tip shape. After a respective deconvolution of the image structural features of the particle facets become observable. According to the equilibrium shape of the clusters being a truncated octahedron in the size range under investigation, hexagonal and rectangular features appear in the images. STS is sensitive to occupied and unoccupied states near the Fermi level and reveals the existence of distinct states in the tunnelling conductivity of the substrate as well as on the clusters. The richly structured density of states of the germanium surface serves here as tip condition test. First measurements of the tunnelling conductivity of the Co_N/Ge(001) are presented and discussed.     

Atomically resolved spin-dependent tunneling on the oxygen-terminated Fe3O4(111)

We employ spin-polarized STM to study the spin-dependent tunneling between a magnetite (111) sample and an antiferromagnetic tip through a vacuum barrier at room temperature. Atomic scale STM images show significant magnetic contrast corresponding to variations in the local surface states induced by oxygen vacancies. The estimated variations in tunneling magnetoresistance of 250% suggest that the spin-transport properties are significantly altered locally by the presence of surface defects.     

Single quantum dots as scanning tunneling microscope tips

We report the use of single quantum dot structures as tips on a scanning tunneling microscope (STM). A single quantum dot structure with a diameter of less than 200 nm and a height of 2 μm was fabricated by reactive ion etching. This dot was placed on a 40 μm-high mesa and mounted on the tip of a STM. The topography of large structures such as quantum wires or gold test substrates is clearly resolved with such a tip. To check the transport properties of the tip, quantum dot arrays were fabricated on resonant tunneling double barrier structures using the same process parameters. Conventional tunneling spectroscopy clearly resolved the 0D states in our samples. Using a metal substrate as second electrode such STM tips can be used to perform high resolution energy spectroscopy on single dots and free standing wire structures.     

STM manipulation of a subphthalocyanine double-wheel molecule on Au(111)

A new class of double-wheel molecules is manipulated on a Au(111) surface by the tip of a scanning tunneling microscope (STM) at low temperature. The double-wheel molecule consists of two subphthalocyanine wheels connected by a central rotation carbon axis. Each of the subphthalocyanine wheels has a nitrogen tag to monitor its intramolecular rolling during an STM manipulation sequence. The position of the tag can be followed by STM, allowing us to distinguish between the different lateral movements of the molecule on the surface when manipulated by the STM tip.     

Bistability of single 1,5 cyclooctadiene molecules on Si(001)

The adsorption and current-induced bistability of single 1,5 cyclooctadiene molecules on Si(001) were studied in ultrahigh vacuum by low-temperature scanning tunneling microscopy (STM). After a dosage of ≈0.05 L at room temperature followed by cooling to the measuring temperature of 7 K, we find that the cyclic alkene molecule preferably adsorbs in the bridge structure with both C=C double bonds reacting with two adjacent Si dimers via [2+2] cycloaddition reaction. The time-dependent current measured upon tunneling through the adsorbed molecule at fixed STM tip height displays a switching between two current levels with the same mean residence time in each level. Higher bias and/or reduced tip height—and therefore higher current—increase the switching rate, suggesting that the reversible switching is due to inelastic electron tunneling. The observed bistability is interpreted as a dynamic interconversion between two degenerate conformations of the adsorbed molecule.     

Conductance switching of a phthalocyanine molecule on an insulating surface

We study the electron transport through the double-barrier junction consisted of the phthalocyanine molecule adsorbed on a NaCl bilayer on a metal substrate and the STM tip from first principles. The hydrogen tautomerization reaction happened in the molecule changes the spatial extensions of the molecular π orbitals under the tip, leading to junction conductance switching. Shifting the molecule to locate on different ions also varies the conductance. The transport channels of the tautomers on different adsorbed sites are identified.     

Model calculations of STM imaging and manipulation of oxygen on Pt(111)

We study tip-adsorbate–substrate interactions in scanning tunneling microscopy (STM) manipulation and imaging, and the influence of impurities on the images. Thence, we perform molecular dynamics simulations and calculate qualitative STM images for oxygen on Pt(1 1 1) surface. The adsorption site of the oxygen molecule is found to be in accordance with ab initio calculations. The calculated STM image has a good resemblance to the experimental ones. The contamination of the tip by oxygen or water alters the STM image strongly. Molecular dynamics simulations on manipulations of oxygen on the surface reveal several mechanisms of how molecular oxygen can be either produced or decomposed with STM tip. Finally, we find out that transfer of oxygen from the surface to an STM tip is not very probable.     

Energy-exchange processes by tunneling electrons

Resistive heating, emission heating or cooling (e.g., the Nottingham effect), and thermal fluctuation radiation are examples of energy exchange processes which are fundamental in electron field emission and in tunneling junctions of scanning tunneling microscopy. These exchange processes are analyzed for both electronic tunneling processes. We first discuss the energy delivered by a monoatomic tip in the field emission process. Strong phonon excitation is expected for field emission currents exceeding 1 nA. Secondly we present a theoretical calculation of the thermal deposition associated with the Nottingham effect in a tunneling junction. The calculation is based on the free electron model for the electrode materials and the tunneling process across a planar vacuum gap. Our results show that the thermal power is deposited not only at the electron receiving electrode but also at the emitting electrode. This originates from a finite probability for electrons below the Fermi level to tunnel through the tunneling barrier replaced by electrons starting from the Fermi level. The comparison between the calculations and the recent STM measurements is given. Finally we discuss the other energy exchange processes in the tunneling junction, and conclude that the thermal coupling between the tip and the sample of STM is extremely small under UHV conditions. This is important for high temperature STM.     

Channel selective scanning tunneling spectroscopy

In this paper we simulate STM and STS experiments for CO monomers and dimers on Cu(1 1 1) surface. We show that the contrast of STM images can be attributed to interference effects between tunneling channels, and suggest that functionalizing the microscope tip improves the channel selectivity of STM. Furthermore, we show that voltage and position dependent tunneling spectra also reflect the same interference effects, but adds the energy resolution to the channel analysis. Especially in the case of nonresonant tunneling, STS measures local density of states only indirectly. The present study suggests that STS in constant height mode can be used in investigating the phase and energy sensitivity of tunneling channels in adsorbate molecules and nanostructures.