Structural investigations of anthranilimide derivatives by CoMFA and CoMSIA 3D-QSAR studies reveal novel insight into their structures toward glycogen phosphorylase inhibition

In the present work, three-dimensional quantitative structure–activity relationship (3-D QSAR) studies on a set of 70 anthranilimide compounds has been performed using docking-based as well as substructure-based molecular alignments. This resulted in the selection of more statistically relevant substructure-based alignment for further studies. Further, molecular models with good predictive power were derived using CoMFA (r ^2?=?0.997; Q ^2?=?0.578) and CoMSIA (r ^2?=?0.976; Q ^2?=?0.506), for predicting the biological activity of new compounds. The so-developed contour plots identified several key features of the compounds explaining wide activity ranges. Based on the information derived from the CoMFA contour maps, novel leads were proposed which showed better predicted activity with respect to the already reported systems. Thus, the present study not only offers a highly significant predictive QSAR model for anthranilimide derivatives as glycogen phosphorylase (GP) inhibitors which can eventually assist and complement the rational drug-design attempts, but also proposes a highly predictive pharmacophore model as a guide for further development of selective and more potent GP inhibitors as anti-diabetic agents.     

Combined 2D and 3D-QSAR,molecular modelling and docking studies of pyrazolodiazepinones as novel phosphodiesterase 2 inhibitors

Selective inhibition of phosphodiesterase 2 (PDE2) in cells where it is located elevates cyclic guanosine monophosphate (cGMP) and acts as novel analgesic with antinociceptive activity. Three-dimensional quantitative structure–activity relationship (QSAR) studies for pyrazolodiazepinone inhibitors exhibiting PDE2 inhibition were performed using comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA) and Topomer CoMFA, and two-dimensional QSAR study was performed using a Hologram QSAR (HQSAR) method. QSAR models were generated using training set of 23 compounds and were validated using test set of nine compounds. The optimum partial least squares (PLS) for CoMFA-Focusing, CoMSIA-SDH, Topomer CoMFA and HQSAR models exhibited good ‘leave-one-out’ cross validated correlation coefficient (q²) of 0.790, 0.769, 0.840 and 0.787, coefficient of determination (r²) of 0.999, 0.964, 0.979 and 0.980, and high predictive power (r²_pred) of 0.796, 0.833, 0.820 and 0.803 respectively. Docking studies revealed that those inhibitors able to bind to amino acid Gln859 by cGMP binding orientation called ‘glutamine-switch’, and also bind to the hydrophobic clamp of PDE2 isoform, could possess high selectivity for PDE2. From the results of all the studies, structure–activity relationships and structural requirements for binding to active site of PDE2 were established which provide useful guidance for the design and future synthesis of potent PDE2 inhibitors.     

Insight into the structural requirements of pyrimidine-based phosphodiesterase 10A (PDE10A) inhibitors by multiple validated 3D QSAR approaches

Schizophrenia is a complex disorder of thinking and behaviour (0.3?0.7% of the population is affected). The over-expression of phosphodiesterase 10A (PDE10A) enzyme may be a potential target for schizophrenia and Huntington’s disease. Because 3D QSAR analysis is one of the most frequently used modelling techniques, in the present study, five different 3D QSAR tools, namely CoMFA, CoMSIA, kNN-MFA, Open3DQSAR and topomer CoMFA methods, were used on a dataset of pyrimidine-based PDE10A inhibitors. All developed models were validated internally and externally. The non-commercial Open3DQSAR produced the best statistical results amongst 3D QSAR tools. The structural interpretations obtained from different methods were thoroughly analysed and were justified on the basis of information obtained from the crystal structure. Information from one method was mostly validated by the results of other methods and vice versa. In the current work, the use of multiple tools in the same analysis revealed more complete information about the structural requirements of these compounds. On the basis of the observations of the 3D QSAR studies, 12 new compounds were designed for better PDE10A inhibitory activity. The current investigation may help in further designing new PDE10A inhibitors with promising activity.     

3D-QSAR studies on indole and 7-azoindole derivatives as ROCK-2 inhibitors: An integrative computational approach

Rho Kinases (ROCK) has been found to regulate a wide range of fundamental cell functions such as contraction, motility, proliferation, and apoptosis. Recent experiments have defined new functions of ROCKs in cells, including centrosome positioning and cell-size regulation, which might contribute to various physiological and pathological states. In this study, we have performed pharmacophore modeling and 3D QSAR studies on a series of 36 indoles and 7-azoindoles derivatives as ROCK2 inhibitors to elucidate the structural variations with their inhibitory activities. Ligand based CoMFA and CoMSIA models were generated based on three different alignment methods such as systematic search, simulated annealing and pharmacophore. A total of 15 CoMFA models and 27 CoMSIA were generated using different alignments. One model from each alignment is selected based on the statistical values. Contour maps of the selected models were compared, analysed and reported. The 3D QSAR study revealed that electro positive group linked to the methoxy-benzene ring position of the structure will enhance the biological activity and bulkier substitutions are preferred in the methyl dihydroindole region. Also, it is found that the hydrogen bond donor substituted at the R₁ position enhances the inhibitory activity. In future, this study would give proper guidelines to further enhance the activity of novel inhibitors for ROCK2.     

Improved 3D-QSAR prediction by multiple-conformational alignment: A case study on PTP1B inhibitors

Three-dimension quantitative structure activity relationship (3D-QSAR) was one of the major statistical techniques to investigate the correlation of biological activity with structural properties of candidate molecules, and the accuracy of statistic greatly depended on molecular alignment methodology. Exhaustive conformational search and successful conformational superposition could extremely improve the predictive accuracy of QSAR modeling. In this work, we proposed a solution to optimize QSAR prediction by multiple-conformational alignment methods, with a set of 40 flexible PTP1B inhibitors as case study. Three different molecular alignment methods were used for the development of 3D-QSAR models listed as following: (1) docking-based alignment (DBA); (2) pharmacophore-based alignment (PBA) and (3) co-crystallized conformer-based alignment (CCBA). Among these three alignments, it was indicated that the CCBA was the best and the fastest strategy in 3D-QSAR development, with the square correlation coefficient (r²) and cross-validated squared correlation coefficient (q²) of comparative molecular field analysis (CoMFA) were 0.992 and 0.694; the r² and q² of comparative molecular similarity indices analysis (CoMSIA) were 0.972 and 0.603, respectively. The alignment methodologies used here not only generated a robust QSAR model with useful molecular field contour maps for designing novel PTP1B inhibitors, but also provided a solution for constructing accurate 3D-QSAR model for various disease targets. Undoubtedly, such attempt in QSAR analysis would greatly help us to understand essential structural features of inhibitors required by its target, and so as to discover more promising chemical derivatives.     

环氧酮肽蛋白酶体抑制剂的构效关系及基于分子相似性的分子设计

针对56个环氧酮肽衍生物,分别采用比较分子场分析(comparative molecular field analysis,CoMFA)、比较分子相似性形状指数分析(comparative molecular similarity indices analysis,CoMSIA)、Topomer CoMFA、Holo-gram QSAR(HQSAR)以及基于一维和二维描述符的支持向量机(support vector machine,SVM)方法进行了细致的构效关系研究。研究显示:通过引入一维和二维描述符的SVM建模方法,避免了柔性分子在三维构效关系研究中的构象选择和叠合难题,亦可有效避免过拟合现象的发生。所建最优SVM模型的决定系数R2、均方根误差(RMS)、交互验证系数Q2和外部预测R2pred分别为0.681,0.436,0.572和0.641。分析结果显示:电性、拓扑特征、疏水性和分子体积是影响环氧酮肽蛋白酶体抑制活性的主要因素。在此基础上,以活性最高样本分子(CID:42638286的)为模板,基于相似性评价方法对其侧链进行设计,结合Lipinski"5规则"类药性筛选,共得到12个新颖目标分子,且预测活性均达到纳摩尔水平。     

Integration of genetic virtual screening patterns and latent multivariate modeling techniques for QSAR optimization based on combinations and/or interactions between peptides and proteins

Both the concept and the model of snug quantitative structure-activity relationship (QSAR) were pro-posed and developed for molecular design through constructing QSAR based on some known mode of receptor/ligand interactions. Many disadvantages of traditional models can be avoided by using the proposed method because the traditional models only determined upon molecular structural features in sample sets themselves. A genetic virtual screening of peptide/protein combinations (GVSPPC) is proposed for the first time by utilizing this idea to examine peptide/protein affinity activities. A genetic algorithm (GA) was developed for screening combinative targets with an interaction mode for virtual receptors. GVSPPC succeeds in disposing difficulties in rational QSAR,in order to search for the ligand/receptor interactions on conditions of unknown structures. Some bioactive oligo-/poly-peptide systems covering 58 angiotensin converting enzyme (ACE) inhibitors and 18 double site mutation residues in camel antibody protein cAb-Lys3 were investigated by GVSPPC with satisfactory results (R 2 cu>0.91,Q 2 cv > 0.86,ERMS=0.19-0.95),respectively,which demonstrates that GVSPPC is more inter-pretable in the ligand-receptor interaction than the traditional QSAR method.     

3D QSAR and molecular docking studies of benzimidazole derivatives as hepatitis C virus NS5B polymerase inhibitors

The urgent need for novel HCV antiviral agents has provided an impetus for understanding the structural requisites of NS5B polymerase inhibitors at the molecular level. Toward this objective, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) of 67 HCV NS5B polymerase inhibitors were performed using two methods. First, ligand-based 3D QSAR studies were performed based on the lowest energy conformations employing the atom fit alignment method. Second, receptor-based 3D QSAR models were derived from the predicted binding conformations obtained by docking all NS5B inhibitors at the allosteric binding site of NS5B (PDB ID: 2dxs). Results generated from the ligand-based model were found superior (r2cv values of 0.630 for CoMFA and 0.668 for CoMSIA) to those obtained by the receptor-based model (r2cv values of 0.536 and 0.561 for CoMFA and CoMSIA, respectively). The predictive ability of the models was validated using a structurally diversified test set of 22 compounds that had not been included in a preliminary training set of 45 compounds. The predictive r2 values for the ligand-based CoMFA and CoMSIA models were 0.734 and 0.800, respectively, while the corresponding predictive r2 values for the receptor-based CoMFA and CoMSIA models were 0.538 and 0.639, respectively. The greater potency of the tryptophan derivatives over that of the tyrosine derivatives was interpreted based on CoMFA steric and electrostatic contour maps. The CoMSIA results revealed that for a NS5B inhibitor to have appreciable inhibitory activity it requires hydrogen bond donor and acceptor groups at the 5-position of the indole ring and an R substituent at the chiral carbon, respectively. Interpretation of the CoMFA and CoMSIA contour maps in context of the topology of the allosteric binding site of NS5B provided insight into NS5B-inhibitor interactions. Taken together, the present 3D QSAR models were found to accurately predict the HCV NS5B polymerase inhibitory activity of structurally diverse test set compounds and to yield reliable clues for further optimization of the benzimidazole derivatives in the data set.     

Pharmacophore generation,atom-based 3D-QSAR and molecular dynamics simulation analyses of pyridine-3-carboxamide-6-yl-urea analogues as potential gyrase B inhibitors

DNA gyrase subunit B (GyrB) is an attractive drug target for the development of antibacterial agents with therapeutic potential. In the present study, computational studies based on pharmacophore modelling, atom-based QSAR, molecular docking, free binding energy calculation and dynamics simulation were performed on a series of pyridine-3-carboxamide-6-yl-urea derivatives. A pharmacophore model using 49 molecules revealed structural and chemical features necessary for these molecules to inhibit GyrB. The best fitted model AADDR.13 was generated with a coefficient of determination (r²) of 0.918. This model was validated using test set molecules and had a good r² of 0.78. 3D contour maps generated by the 3D atom-based QSAR revealed the key structural features responsible for the GyrB inhibitory activity. Extra precision molecular docking showed hydrogen bond interactions with key amino acid residues of ATP-binding pocket, important for inhibitor binding. Further, binding free energy was calculated by the MM-GBSA rescoring approach to validate the binding affinity. A 10 ns MD simulation of inhibitor #47 showed the stability of the predicted binding conformations. We identified 10 virtual hits by in silico high-throughput screening. A few new molecules were also designed as potent GyrB inhibitors. The information obtained from these methodologies may be helpful to design novel inhibitors of GyrB.     

Binding Model and 3D-QSAR of 3-（2-Chloropyrid-5- ylmethylamino）-2-cyanoacrylates as PSⅡ Electron Transport Inhibitor

The binding model of 3-（2-chloropyrid-5-ylmethylamino）-2-cyanoacrylate photosystem Ⅱ （PSⅡ） electron transport inhibitors with the D 1 protein of PSII was built. The high herbicidal activity of this kind of inhibitors was explained by docking studies： in addition to usual factors, the N atom on the pyridine ring could form an H-bond with the backbone amide of Phe265 on the D1 protein. 3D-QSAR analysis on sixteen 3-（2-chloropyrid-5-yl- methylamino）-2-cyanoacrylate compounds was performed using CoMFA method to explain the nature of interactions between the compounds and D1 protein. These studies may provide useful insights for designing new PSII electron transport inhibitors.     

A combined molecular modeling study on gelatinases and their potent inhibitors

Zinc‐dependent matrix metalloproteinase (MMP) family is considered to be an attractive target because of its important role in many physiological and pathological processes. In the present work, a molecular modeling study combining protein‐, ligand‐ and complex‐based computational methods was performed to analyze a new series of β‐N‐biaryl ether sulfonamide hydroxamates as potent inhibitors of gelatinase A (MMP‐2) and gelatinase B (MMP‐9). Firstly, the similarities and differences between the binding sites of MMP‐2 and MMP‐9 were analyzed through sequence alignment and structural superimposition. Secondly, in order to extract structural features influencing the activities of these inhibitors, quantitative structure‐activity relationship (QSAR) models using genetic algorithm‐multiple linear regression (GA‐MLR), comparative molecular field (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were developed. The proposed QSAR models could give good predictive ability for the studied inhibitors. Thirdly, docking study was employed to further explore the binding mode between the ligand and protein. The results from all the above analyses could provide the information about the similarities and differences of the binding mode between the MMP‐2, MMP‐9 and their potent inhibitors. The obtained results can provide very useful information for the design of new potential inhibitors. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010