Electronic effect of substituents in coupling reactions between <Emphasis Type="Italic">para</Emphasis>-substituted benzamidoximes and nitrile ligands in <Emphasis Type="Italic">cis</Emphasis>-[PtCl<Subscript>2</Subscript>(EtCN)<Subscript>2</Subscript>] complex

The rate constants were determined for a number of reactions of nucleophilic addition of para-substituted benzamidoximes 4-RC₆H₄C(NH₂)=NOH to cis-[PtCl₂(EtCN)₂] at 23°C in acetone. A linear correlation between log (k _R/k _H) and σ _para was found, and reaction constant ρ²⁹⁶(σ _para ) was calculated. The prepared compounds were characterized by IR, ¹H NMR, and HR ESI⁺-MS.     

Kinetics and mechanism of benzyl <Emphasis Type="Italic">para</Emphasis>-chlorophenyl ketone oxidation

The oxidation of benzyl para-chlorophenyl ketone in chlorobenzene at 100°C occurs through the formation of short chains. Non-peroxide reaction products (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone, para-chlorobenzyl, benzaldehyde, and para-chlorobenzoic acid) are formed not only by the transformation of hydroperoxide (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone) but also (or solely) through the recombination of α-ketoperoxyl radicals with or without chain termination. α-Hydroperoxide decomposes predominantly through a heterolytic route to form para-chlorobenzoic acid and benzaldehyde. Benzaldehyde and 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone undergo radical chain oxidation in the reaction medium to form benzoic acid (benzaldehyde), para-chlorobenzyl, and benzoic and para-chlorobenzoic acids (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone). The homolytic decomposition of α-hydroperoxy ketone and α-hydroxy-α-hydroperoxy ketone causes the self-acceleration of the process and affords 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone or, to a lesser extent, benzaldehyde and para-chlorobenzoic acid (α-hydroperoxy ketone). para-Chlorobenzoic acid substantially accelerates the heterolytic decomposition of α-hydroxy-α-hydroperoxy ketone and the oxidation of benzyl para-chlorophenyl ketone with peroxy acids to ester according to the Baeyer-Villiger mechanism. The rate constants of the main steps of the process and kinetic parameters are calculated by solving the inverse kinetic problem.     

Theoretical Study of Substituent Effect in Aryl Group Migration in (<Emphasis Type="Italic">para</Emphasis>-C<Subscript>6</Subscript>H<Subscript>4</Subscript>X)Mn(CO)5 Complexes

In this study, we report substituent effect on aryl group migration in (para-C₆H₄X)Mn(CO)₅ complexes using mpw1pw91 quantum chemical calculations. These calculations reveal good linear relationships between barrier energy (ΔE), activation energy (ΔH^?), activation free energy (ΔG^?) values and rate constants with Hammett constants of X-substituents. The occupancy values of Mn–CO_cis and Mn–C(O)-(para-C₆H₄X) bonds in reactant, transition state and product were calculated by Natural bond orbital (NBO) method.     

Kinetics and mechanism of the catalytic reaction between ozone and <Emphasis Type="Italic">para</Emphasis>-cresol in acetic anhydride

The kinetics of the liquid-phase catalytic oxidation of para-cresol with an ozone-air mixture in the presence of manganese(II) acetate is reported. In an acetic anhydride medium, para-cresol reacts with ozone as para-cresyl acetate, which is formed at the instant the solution to be oxidized is prepared. Under these conditions, the major oxidation products are para-acetoxybenzyl acetate (63.5%) and para-acetoxybenzylidene diacetate (13.7%). The effect of the managanese(II) acetate concentration on the traction selectivity with respect to the oxidation of the methyl group of the substrate is reported. A mechanism consistent with the experimental data available on this catalytic redox reaction is suggested.     

Comparison of catalytic performance of synthesized EU-1 zeolite with dealuminated EU-1 zeolite for <Emphasis Type="Italic">m</Emphasis>-xylene isomerization reaction

EU-1 zeolite was synthesized with high purity by a hydrothermal method and under optimum conditions: synthesis time 72 h, temperature 200°C, and aging time 12 h. Then, the synthesized EU-1 zeolite was modified by dealumination with nitric acid and the changes of the properties such as surface area, pore volume, and Si/Al ratio were investigated. The catalytic performance of these two catalysts was studied and compared with a commercial mordenite catalyst for meta-xylene isomerization reaction in a fixed bed reactor. The results showed that the modification of catalyst with acid increases Si/Al ratio from 25 to 50 due to the removal of a number of aluminium atoms from the framework of zeolite. Also the catalyst surface area increased from 300.237 m² g^?1 for EU-1 to 333.639 m² g^?1 for modified EU-1. According to results, the modified Eu-1 had higher para/ortho ratio, meta-xylene conversion, and para-xylene yield than EU-1 and commercial mordenite in the meta-xylene isomerization reaction.     

Effect of the structure of the <Emphasis Type="Italic">ortho</Emphasis>, <Emphasis Type="Italic">meta</Emphasis>, and <Emphasis Type="Italic">para</Emphasis> isomers of perhydroterphenyl on their reactivity in heterogeneous catalytic dehydrogenation

The kinetics of the dehydrogenation of the individual ortho, meta, and para isomers of perhydroterphenyl and their mixtures over a (3 wt % Pt)/C catalyst has been investigated in a flow reactor at 280–340°C. The rate of the isomerization of the stereoisomers of the initial substrate (perhydroterphenyl) and terphenyl dehydrogenation products has an effect on the hydrogen release kinetics. The highest reactivity in isomerization is shown by the ortho isomer. The largest amount of hydrogen (7.0 wt %) is released in the dehy-drogenation of perhydro-meta-terphenyl and perhydro-para-terphenyl, whose conversion at 320°C is 96%.     

μ<Subscript>2</Subscript>-Oxobis[(aroxo)tris(<Emphasis Type="Italic">para</Emphasis>-tolyl)antimony]: Synthesis and Structure

µ₂-Oxobis[(2,4,6-tribromophenoxo)tris(para-tolyl)antimony] (I), µ₂-oxobis[(2,3,4,5,6-pentachlorophenoxo) tris(para-tolyl)antimony] (II), and µ₂-oxobis(2,4-dinitrophenoxo)tris(para-tolyl)antimony] (III) have been synthesized with high yields by the reaction of tris(para-tolyl)antimony with 2,4,6-tribromo-, 2,3,4,5,6-pentachloro-, and 2,4-dinitrophenol, respectively, in ether in the presence of tert-butylhydroperoxide. The Sb atoms in complexes I, II, and III have a distorted trigonal bipyramidal coordination with the aroxyl ligands and the bridging oxygen atom in axial positions. The central Sb–O–Sb moiety in molecules of complexes I–III has an angular structure.     

Formation of solvate structures by the <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, and <Emphasis Type="Italic">para</Emphasis>-isomers of hydroxybenzoic acid in supercritical fluid

The solvate structures formed by the ortho-, meta-, and para-isomers of hydroxybenzoic acid (o-HBA, m-HBA, and p-HBA) with a polar co-solvent (methanol at a concentration of 0.030 and 0.035 mole fractions) in supercritical carbon dioxide at a constant density of 0.7 g/cm³ and temperatures of 318 and 328 K have been studied by the classic molecular dynamics. It has been determined that a stable hydrogen-bonded complex with the co-solvent forms via the hydrogen of the carboxyl group for all isomers. The probability of this complex existence is high at all temperatures and concentrations. In the o-HBA molecule, the other functional groups are engaged in the intramolecular hydrogen bond, but not involved in interactions with methanol. It has been found that m-HBA and p-HBA can be involved in hydrogen bonds with methanol via hydroxyl hydrogen and oxygen atoms; they are characterized by the presence of one more co-solvent molecule (rarely, two molecules) in their solvation shell and intermittent formations/breakages of hydrogen bonds via other functional groups. These bonds are far less stable, and their formation is sensitive to change of temperature and co-solvent concentration. It has been concluded that the degree of selective solvation of m-HBA and p-HBA by co-solvent molecules is approximately the same, but the rate of structural rearrangements in the nearest environment of m-HBA is higher than that of p-HBA.     

Structure of aminonitrones and electronic effect of substituents on their acid-base properties

A series of para-substituted aromatic aminonitrones p-RC₆H₄C(NH₂)=N⁺(Me)O^– (R = NMe₂, H, Br, Cl, CF₃) have been prepared. Acidity constants of the conjugate acids RC₆H₄C(NH₂)N⁺(Me)OH at 25°C in a EtOH–H₂O mixture (5: 95) have been determined by potentiometric titration. A linear correlation between log (k_R/k_H) and σ_para values has been revealed, and a ρ²⁹⁸(σ_para) parameter has been determined as of 0.635.     

Sodium perborate/NaNO<Subscript>2</Subscript>/KHSO<Subscript>4</Subscript>-triggered synthesis and kinetics of nitration of aromatic compounds

Sodium perborate (SPB) was used as efficient green catalyst for NaNO₂/KHSO₄-mediated nitration of aromatic compounds in aqueous acetonitrile medium. Synthesis of nitroaromatic compounds was achieved under both conventional and solvent-free microwave conditions. Reaction times were comparatively shorter in the microwave-assisted than conventional reaction. The reaction kinetics for nitration of phenols in aqueous bisulfate and acetonitrile medium indicated first-order dependence on [Phenol], [NaNO₂], and [SPB]. Reaction rates accelerated with introduction of electron-donating groups but retarded with electron-withdrawing groups. Kinetic results did not fit well quantitatively with Hammett’s equation. Observed deviations from linearity were addressed in terms of exalted Hammett’s constants (\( \bar{\sigma } \) or σ_eff), para resonance interaction energy (ΔΔG_p) parameter, and Yukawa–Tsuno parameter (r). This term provides a measure of the extent of resonance stabilization for a reactive structure that builds up charge (positive) in its transition state. The observed negative entropy of activation (?ΔS^#) suggests greater solvation and/or cyclic transition state before yielding products.     

Stereochemistry of dihydroxylation of <Emphasis Type="Italic">N</Emphasis>-arylbicyclo[2.2.1]-hept-5-ene-<Emphasis Type="Italic">endo</Emphasis>- and -<Emphasis Type="Italic">exo</Emphasis>-2,3-dicarboximides

Stereochemistry of the oxidation of N-arylbicyclo[2.2.1]hept-5-ene-endo-and-exo-2,3-dicarboximides at the double bond with peroxyacetic acid generated in situ in the presence of sulfuric acid and with an anhydrous dioxane solution of peroxyacetic acid was studied. In both cases, the reaction was stereospecific, regardless of the substituent in the N-aryl group and configuration of the imide ring, but the reaction direction depended on the presence of water in the system. In the first case, the corresponding trans-5,6-dihydroxy derivatives were formed, while in the second, exo-5,6-epoxy derivatives. The oxidation of N-arylbicyclo[2.2.1]-hept-5-ene-endo-and-exo-2,3-dicarboximides with a solution of potassium permanganate in aqueous acetone gave the corresponding N-aryl-cis-5,6-dihydroxybicyclo[2.2.1]heptane-endo-and-exo-2,3-dicarboximides. The exo,cis,exo and exo,cis,endo configurations of the synthesized compounds were determined by ¹H NMR spectroscopy.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Reaction of transsilylation of <Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-trimethylsilylacetamide with silanes ClCH<Subscript>2</Subscript>SiR<Superscript>1</Superscript>R<Superscript>2</Superscript>Cl

The reaction of N-methyl-N-trimethylsilylacetamide with silanes ClCH₂SiR¹R²Cl (R¹, R² = H, Me; H, Ph; Ph₂) leads to the formation of (O→Si) chelate compounds with pentacoordinate silicon: N-[chloro(methyl)-silyl]methyl-, N-[chloro(phenyl)silyl]methyl-, and N-[chloro(diphenyl)silyl]methyl-N-methylacetamides. From the data of multinuclear NMR spectroscopy, the intermediates of the reaction of N-methyl-N-trimethylsilylacetamide with ClCH₂SiPhHCl and ClCH₂SiPh²Cl are stable in CDCl₃ solution at room temperature during several days and slowly rearrange to the final (O–Si) chelate compounds.     

Synthesis and antimicrobial activity of novel fused [1,2,4]triazino[5,6-<Emphasis Type="Italic">b</Emphasis>]indole derivatives

Synthesis of new fused systems of triazino[5,6-b]indole starting with preparation of 3-amino[1,2,4]-triazino[5,6-b]indole 1 by reaction of isatin with 2-aminoguanidinium carbonate in boiling acetic acid is presented [1]. Intermediate compound 1 reacted with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine and gave new heterotetracyclic nitrogen systems, such as 3-(N ²-guanidinylimino)indole-2(1H)-one 2, 3-(N-ethoxycarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 3, 3-(N-ethoxymethyleneamino)-4H-[1,2,4]-triazino[5,6-b]indole 4, 3-(hydrazinothiocarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 5, respectively. N-(1,3-dioxoindene-2-ylidene)-4H-[1,2,4]triazino[5,6-b]indol-3-amine 6 was synthesized by reaction of compound 1 with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine. New fused indole systems, pyrimido[2′,1′:3,4][1,2,4]triazino[5,6-b]indol-3(4H)-one 8, 9, 11, 12 and 1H-imidazo[2′,1′:3,4][1,2,4]triazino-[5,6-b]indol-2(3H)-one 10, were synthesized in the reaction of the intermediate 1 with bifunctional compounds. Structures of the products were elucidated from their elemental analysis and spectral data (IR, ¹H and ¹³C NMR and mass spectra). Antimicrobial activity of some synthesized compounds was tested.     

Preparation of stereochemically pure <Emphasis Type="Italic">E</Emphasis>- and <Emphasis Type="Italic">Z</Emphasis>-alkenoic acids and their methyl esters from bicyclo[<Emphasis Type="Italic">n</Emphasis>.1.0]alkan-1-ols. Application in the synthesis of insect pheromones

Oxidative cleavage of exo- and endo-alkyl- and hydroxyalkyl-substituted bicyclo[n.1.0]alkan-1-ols with (diacetoxy-λ³-iodanyl)benzene gave the corresponding methyl alkenoates exclusively with E or Z configuration of the double bond. This reaction was used as the key stage in the syntheses of stereoisomerically pure components of pest insect pheromones: (E)-dodec-9-en-1-yl acetate (European pine shoot moth Rhyacionia buoliana), (Z)-tetradec-11-en-1-yl acetate (European oak leafroller Tortrix viridana), and (3E,8Z,11Z)-tetradeca-3,8,11-trien-1-yl acetate (tomato leafminer Tuta absoluta).     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Structure and Reactivity of Bicyclo[2.2.1]hept-2-ene-<Emphasis Type="Italic">endo</Emphasis>-5,<Emphasis Type="Italic">endo</Emphasis>-6-dicarboxylic (endic) Acid Hydrazide

Establishing of the structure of hydrazinolysis product obtained from bicyclo[2.2.1]hept-2-ene-endo-5, endo-6-dicarboxylic (endic) acid was performed by preparation of the compound under alternative conditions followed by comparison of the characteristics and spectral parameters of the resulting substances, and also by quantum-chemical calculations by the density functional method of the chemical shifts in ¹H and ¹³C NMR spectra of different reaction products. The X-ray diffraction analysis of the hydrazide was also carried out. The compound obtained was assigned a structure of N-aminobicyclo[2.2.1] hept-2-ene-endo-5,endo-6-dicarboximide. The products were prepared by its reactions with arylsulfonyl chlorides, benzoyl chlorides, m-tolyl and p-toluene-sulfonyl isocyanates, phenyl isothiocyanate, with o-nitrobenzaldehyde, and oxiranes (1,2-epoxycyclohexane and 2,3-epoxypropylcarbazole). The aromatic sulfonamides, carboxamides, and ureas were epoxidized by performic acid obtained in situ from the formic acid and hydrogen peroxide. Products of [3+2]-cycloaddition of aryl azides to the strained double bond in the N-aminobicyclo[2.2.1] hept-2-ene-endo-5,endo-6-dicarboximide and its derivatives. The structures of compounds obtained were confirmed by their IR, 1H and 13C NMR spectra.     

Copper,cobalt, and nickel complexes of azomethine compounds containing phenylazo group in the amine fragment: Syntheses,structures, and magnetic properties

The Cu, Ni, and Со complexes based on the following new azomethine compounds containing azobenzene groups in the ortho- or para-positions of the amine fragment are synthesized: 2-allyl-6-[(E)-[4-(E)-phenylazophenyl]iminomethyl]phenol (HL¹), 2-allyl-6-[(E)-[4-methyl-2-[(E)-phenylazo]-p-tolylazo] iminomethyl]phenol (HL²), 5-methoxy-2-[(E)-[4-[(E)-phenylazo]phenyl]iminoethyl]phenol (HL³), and 5-methoxy-2-[(E)-[4-methyl-2-[(E)-p-tolylazo]phenyl]iminomethyl]phenol (HL⁴). The structures of the complexes are determined by the data of IR and ¹Н NMR spectroscopy (for the azomethine compounds), X-ray absorption spectroscopy, and magnetochemistry. The coordination centers of all Cu complexes have a distorted square structure. A direct dependence of the geometry of the coordination polyhedron on the position of azobenzene groups in the amine fragments of the ligands is found for the Ni and Co complexes. The octahedral environment of the nickel and cobalt ions takes place in the case of the ortho-position of the amine fragment, whereas the square environment for the Ni complexes or the tetrahedral environment for the Co complexes is observed at the para-position. The molecular structures of two azomethines HL¹ and HL⁴ are determined by X-ray diffraction analysis (CIF files CCDC nos. 1552836 (HL¹) and 1552837 (HL⁴)).     

Photoactivation of the oxidation process of <Emphasis Type="Italic">para</Emphasis>-chlorophenol in aqueous solutions

Kinetics of the oxidative destruction of para-chlorophenol in a combined iron-persulfate system under the action of simulated sunlight was studied. It was shown that, under additional photoirradiation, a deep conversion of chlorophenol and main intermediate products of its destruction is provided, with iron compounds serving not only as catalysts, but also as photochemical oxidation sensitizers. The degree of mineralization of para-chlorophenol and products of its oxidation under a photoactivated treatment for two hours reached a value of 60%, whereas that in the “dark” reaction did not exceed 1%. In the combined oxidizing system S₂O ₈ ^2– /Fe²⁺/UV-Vis, a considerable synergic effect was observed due to the formation of reactive oxygen intermediate both via decomposition persulfate and through reduction of Fe³⁺ from inactive Fe³⁺ intermediates.     

Rh<Subscript>2</Subscript>(OAc)<Subscript>4</Subscript>-catalyzed reaction of 2-(2-carbonylvinyl)-3-phenyl-2<Emphasis Type="Italic">H</Emphasis>-azirines with diazo esters

Rh₂(OAc)₄-catalyzed reaction of 2-(2-carbonylvinyl)-3-phenyl-2H-azirines with diazo esters proceeds through an intermediate generation of azirinium ylide suffering a nonstereoselective ring opening to form (3Z)- and (3E)-2-azahexa-1,3,5-trienes. The former depending on configuration of the C ⁵ =C ⁶ bond may undergo cyclization either in derivative of 2,3-dihydropyridine, or in pyrrolium ylide that isomerizes into a derivative of 1H-pyrrole. According to DFT calculation, the preferred formation of pyrroles at increasing volume of Z-substituent at the atom C ⁶ and of substituents at the atom C ¹ of 2-azahexatriene occurs due to the destabilization of more sterically loaded transition states of 1,6-cyclization.