Iridium(III) complexes formed by O-H and/Or C-H activation of 2-(arylazo)phenols

Reaction of 2-(arylazo)phenols with [Ir(PPh(3))(3)Cl] in refluxing ethanol in the presence of a base (NEt(3)) affords complexes of three different types, viz. [Ir(PPh(3))(2)(NO-R)(H)Cl] (R = OCH(3), CH(3), H, Cl and NO(2)), [Ir(PPh(3))(2)(NO-R)(H)(2)] and [Ir(PPh(3))(2)(CNO-R)(H)]. Structures of the [Ir(PPh(3))(2)(NO-Cl)(H)Cl], [Ir(PPh(3))(2)(NO-Cl)(H)(2)] and [Ir(PPh(3))(2)(CNO-Cl)(H)] complexes have been determined by X-ray crystallography. In the [Ir(PPh(3))(2)(NO-R)(H)Cl] and [Ir(PPh(3))(2)(NO-R)(H)(2)] complexes, the 2-(arylazo)phenolate ligands are coordinated to the metal center as monoanionic bidentate N,O-donors, whereas in the [Ir(PPh(3))(2)(CNO-R)(H)] complexes, they are coordinated to iridium as dianionic tridentate C,N,O-donors. In all three products formed in ethanol, the two PPh(3) ligands are trans. Reaction of 2-(arylazo)phenols with [Ir(PPh(3))(3)Cl] in refluxing toluene in the presence of NEt(3) affords complexes of two types, viz. [Ir(PPh(3))(2)(CNO-R)(H)] and [Ir(PPh(3))(2)(CNO-R)Cl]. Structure of the [Ir(PPh(3))(2)(CNO-Cl)Cl] complex has been determined by X-ray crystallography, and the 2-(arylazo)phenolate ligand is coordinated to the metal center as a dianionic tridentate C,N,O-donor and the two PPh(3) ligands are cis. All of the iridium(III) complexes show intense MLCT transitions in the visible region. Cyclic voltammetry shows an Ir(III)-Ir(IV) oxidation on the positive side of SCE and an Ir(III)-Ir(II) reduction on the negative side for all of the products.     

Heterolytic cleavage of dihydrogen promoted by sulfido-bridged tungsten-ruthenium dinuclear complexes

A series of sulfido-bridged tungsten-ruthenium dinuclear complexes Cp*W(mu-S)(3)RuX(PPh(3))(2) (4a; X = Cl, 4b; X = H), Cp*W(O)(mu-S)(2)RuX(PPh(3))(2) (5a; X = Cl, 5b; X = H), and Cp*W(NPh)(mu-S)(2)RuX(PPh(3))(2) (6a; X = Cl, 6b; X = H) have been synthesized by the reactions of (PPh(4))[Cp*W(S)(3)] (1), (PPh(4))[Cp*W(O)(S)(2)] (2), and (PPh(4))[Cp*W(NPh)(S)(2)] (3), with RuClX(PPh(3))(3) (X = Cl, H). The heterolytic cleavage of H(2) was found to proceed at room temperature upon treating 5a and 6a with NaBAr(F)(4) (Ar(F) = 3, 5-C(6)H(3)(CF(3))(2)) under atmospheric pressure of H(2), which gave rise to [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (7a) and [Cp*W(NHPh)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (8), respectively. When Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b) was treated with a Br?nstead acid, [H(OEt(2))(2)](BAr(F)(4)) or HOTf, protonation occurred exclusively at the terminal oxide to give [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](X) (7a; X = BAr(F)(4), 7b; X = OTf), while the hydride remained intact. The analogous reaction of Cp+W(mu-S)(3)Ru(PPh(3))(2)H (4b) led to immediate evolution of H(2). Selective deprotonation of the hydroxyl group of 7a or 7b was induced by NEt(3) and 4b, generating Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b). Evolution of H(2) was also observed for the reactions of 7a or 7b with CH(3)CN to give [Cp*W(O)(mu-S)(2)Ru(CH(3)CN)(PPh(3))(2)](X) (11a; X = BAr(F)(4), 11b; X = OTf). We examined the H/D exchange reactions of 4b, 5b, and 7a with D(2) and CH(3)OD, and found that facile H/D scrambling over the W-OH and Ru-H sites occurred for 7a. Based on these experimental results, the mechanism of the heterolytic H(2) activation and the reverse H(2) evolution reactions are discussed.     

Electronic and medium effects on the rate of arene C [bond] H activation by cationic Ir(III) complexes

A detailed mechanistic study of arene C [bond] H activation in CH(2)Cl(2) solution by Cp(L)IrMe(X) [L = PMe(3), P(OMe)(3); X = OTf, (CH(2)Cl(2))BAr(f); (BAr(f) = B[3,5-C(6)H(3)(CF(3))(2)](4))(-)] is presented. It was determined that triflate dissociation in Cp(L)IrMe(OTf), to generate tight and/or solvent-separated ion pairs containing a cationic iridium complex, precedes C [bond] H activation. Consistent with the ion-pair hypothesis, the rate of arene activation by Cp(L)IrMe(OTf) is unaffected by added external triflate salts, but the rate is strongly dependent upon the medium. Thus the reactivity of Cp(PMe(3))IrMe(OTf) can be increased by almost 3 orders of magnitude by addition of (n-Hex)(4)NBAr(f), presumably because the added BAr(f) anion exchanges with the OTf anion in the initially formed ion pair, transiently forming a cation/borate ion pair in solution (special salt effect). In contrast, addition of (n-Hex)(4)NBAr(f) to [CpPMe(3)Ir(Me)CH(2)Cl(2)][BAr(f)] does not affect the rate of benzene activation; here there is no initial covalent/ionic pre-equilibrium that can be perturbed with added (n-Hex)(4)NBAr(f). An analysis of the reaction between Cp(PMe(3))IrMe(OTf) and various substituted arenes demonstrated that electron-donating substituents on the arene increase the rate of the C [bond] H activation reaction. The rate of C(6)H(6) activation by [Cp(PMe(3))Ir(Me)CH(2)Cl(2)][BAr(f)] is substantially faster than [Cp(P(OMe)(3))Ir(Me)CH(2)Cl(2)][BAr(f)]. Density functional theory computations suggest that this is due to a less favorable pre-equilibrium for dissociation of the dichloromethane ligand in the trimethyl phosphite complex, rather than to a large electronic effect on the C [bond] H oxidative addition transition state. Because of these combined effects, the overall rate of arene activation is increased by electron-donating substituents on both the substrate and the iridium complex.     

Intramolecular alkyl phosphine dehydrogenation in cationic rhodium complexes of tris(cyclopentylphosphine)

[Rh(nbd)(PCyp(3))(2)][BAr(F) (4)] (1) [nbd = norbornadiene, Ar(F) = C(6)H(3)(CF(3))(2), PCyp(3) = tris(cyclopentylphosphine)] spontaneously undergoes dehydrogenation of each PCyp(3) ligand in CH(2)Cl(2) solution to form an equilibrium mixture of cis-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 a) and trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 b), which have hybrid phosphine-alkene ligands. In this reaction nbd acts as a sequential acceptor of hydrogen to eventually give norbornane. Complex 2 b is distorted in the solid-state away from square planar. DFT calculations have been used to rationalise this distortion. Addition of H(2) to 2 a/b hydrogenates the phosphine-alkene ligand and forms the bisdihydrogen/dihydride complex [Rh(PCyp(3))(2)(H)(2)(eta(2)-H(2))(2)][BAr(F) (4)] (5) which has been identified spectroscopically. Addition of the hydrogen acceptor tert-butylethene (tbe) to 5 eventually regenerates 2 a/b, passing through an intermediate which has undergone dehydrogenation of only one PCyp(3) ligand, which can be trapped by addition of MeCN to form trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(PCyp(3))(NCMe)][BAr(F) (4)] (6). Dehydrogenation of a PCyp(3) ligand also occurs on addition of Na[BAr(F) (4)] to [RhCl(nbd)(PCyp(3))] in presence of arene (benzene, fluorobenzene) to give [Rh(eta(6)-C(6)H(5)X){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (7: X = F, 8: X = H). The related complex [Rh(nbd){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] 9 is also reported. Rapid ( approximately 5 minutes) acceptorless dehydrogenation occurs on treatment of [RhCl(dppe)(PCyp(3))] with Na[BAr(F) (4)] to give [Rh(dppe){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (10), which reacts with H(2) to afford the dihydride/dihydrogen complex [Rh(dppe)(PCyp(3))(H)(2)(eta(2)-H(2))][BAr(F) (4)] (11). Competition experiments using the new mixed alkyl phosphine ligand PCy(2)(Cyp) show that [RhCl(nbd){PCy(2)(Cyp)}] undergoes dehydrogenation exclusively at the cyclopentyl group to give [Rh(eta(6)-C(6)H(5)X){PCy(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (17: X = F, 18: X = H). The underlying reasons behind this preference have been probed using DFT calculations. All the complexes have been characterised by multinuclear NMR spectroscopy, and for 2 a/b, 4, 6, 7, 8, 9 and 17 also by single crystal X-ray diffraction.     

Pyrazolyl-bridged iridium dimers. 18.(1) influence of metal-metal bonding on the geometry of diiridium(II) adducts and hydrido-diiridium complexes formed from the diiridium(I) prototype [Ir(mu-pz)(PPh(3))(CO)](2) (pzH = Pyrazole) by dihydrogen addition or protonation

Slow uptake of molecular dihydrogen by the diiridium(I) prototype [Ir(mu-pz)(PPh(3))(CO)](2) (1: pzH = pyrazole) is accompanied by formation of a 1,2-dihydrido-diiridium(II) adduct [IrH(mu-pz)(PPh(3))(CO)](2) (2), for which an X-ray crystal structure determination reveals that (unlike in 1) the PPh(3) ligands are axial, with the hydrides occupying trans coequatorial positions across the Ir-Ir bond (2.672 A). Reaction with CCl(4) effects hydride replacement in 2, affording the monohydride Ir(2)H(Cl)(mu-pz)(2)(PPh(3))(2)(CO)(2) (3) in which Ir-Ir = 2.683 A. At one metal center, H is equatorial and PPh(3) is axial, while at the other, Cl is axial as is found in the symmetrically substituted product [Ir(mu-pz)(PPh(3))(CO)Cl](2) (4) (Ir-Ir = 2.754 A) that is formed by action of CCl(4) on 1. Treatment of 1 with I(2) yields the diiodo analogue 5 of 4, which reacts with LiAlH(4) to afford the isomorph Ir(2)H(I)(mu-pz)(2)(PPh(3))(2)(CO)(2) (6) of 3 (Ir-Ir = 2.684 A). Protonation (using HBF(4)) of 1 results in formation of the binuclear cation Ir(2)H(mu-pz)(2)(PPh(3))(2)(CO)(2)(+) (7: BF(4)(-) salt), which shows definitive evidence (from NMR) for a terminally bound hydride in solution (CH(2)Cl(2) or THF), but 7 crystallizes as an axially symmetric unit in which Ir-Ir = 2.834 A. Reaction of 7 with water or wet methanol leads to isolation of the cationic diiridium(III) products [Ir(2)H(2)(mu-OX)(mu-pz)(2)(PPh(3))(2)(CO)(2)]BF(4) (8, X = H; 9, X = Me).     

One-pot synthesis of strong solid state emitting mono-cyclometalated iridium(III) complexes: study of their aggregation induced enhanced phosphorescence

Strong solid-state greenish-blue emitting, mono-cyclometalated iridium complexes, [Ir(ppy)(PPh(3))(2)(H)(Cl)], 2a and [Ir(F(2)ppy)(PPh(3))(2)(H)(Cl)], 2b [ppyH = 2-phenylpyridine; F(2)ppyH = 2-(2',4'-difluoro)phenylpyridine], have been synthesized by a convenient route. The 'aggregation induced enhanced phosphorescence (AIEP)' activity exhibited by these complexes has been rationalized.     

Coordination features of a hybrid scorpionate/phosphane ligand exemplified with Iridium

Although the pentacoordinated complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(cod)] (1; pz=pyrazolyl, cod=1,5-cyclooctadiene), isolated from the reaction of [{Ir(mu-Cl)(cod)}(2)] with [Li(tmen)][B(allyl)(CH(2)PPh(2))- (pz)(2)] (tmen=N,N,N',N'-tetramethylethane-1,2-diamine), shows behavior similar to that of the related hydridotris(pyrazolyl)borate complex, the carbonyl derivatives behave in a quite different way. On carbonylation of 1, the metal--metal-bonded complex [(Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}CO)(2)(mu-CO)] (2) that results has a single ketonic carbonyl bridge. This bridging carbonyl is labile such that upon treatment of 2 with PMe(3) the pentacoordinated Ir(I) complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PMe(3))] (3) was isolated. Complex 3 shows a unique fac coordination of the hybrid ligand with the allyl group eta(2)-bonded to the metal in the equatorial plane of a distorted trigonal bipyramid with one pyrazolate group remaining uncoordinated. This unusual feature can be rationalized on the basis of the electron-rich nature of the metal center. The related complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PPh(3))] (4) was found to exist in solution as a temperature-dependent equilibrium between the cis-pentacoordinated and trans square planar isomers with respect to the phosphorus donor atoms. Protonation of 3 with different acids is selective at the iridium center and gives the cationic hydrides [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PMe(3))]X (X=BF(4) (5), MeCO(2) (6), and Cl (7)). Complex 7 further reacts with HCl to generate the unexpected product [Ir(CO)Cl{(Hpz)B(CH(2)PPh(2))(pz)CH(2)CH(Me)}(PMe(3))]Cl (9; Hpz=protonated pyrazolyl group) formed by the insertion of the hydride into the Ir-(eta(2)-allyl) bond. In contrast, protonation of complex 4 with HCl stops at the hydrido complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PPh(3))]Cl (8). X-ray diffraction studies carried out on complexes 2, 3, and 9 show the versatility of the hybrid scorpionate ligand in its coordination.     

Organometallic chemistry of fluorinated allenes

Reaction of 1,1-difluoroallene and tetrafluoroallene with a series of transition metal complex fragments yields the mononuclear allene complexes [CpMn(CO)(2)(allene)] (1), [(CO)(4)Fe(allene)] (2), [(Ph(3)P)(2)Pt(C(3)H(2)F(2))] (4), [Ir(PPh(3))(2)(C(3)H(2)F(2))(2)Cl] (5), and the dinuclear complexes [mu-eta(1)-eta(3)-C(3)H(2)F(2))Fe(2)(CO)(7)] (3), [Ir(PPh(3))(C(3)H(2)F(2))(2)Cl](2) (6), and [mu-eta(2)-eta(2)-C(3)H(2)F(2))(CpMo(CO)(2))(2)] (9), respectively. In attempts to synthesize cationic complexes of fluorinated allenes [CpFe(CO)(2)(C(CF(3))=CH(2))] (7a), [CpFe(CO)(2)(C(CF(3))=CF(2))] (7b) and [mu-I-(CpFe(CO)(2))(2)][B(C(6)H(3)-3,5-(CF(3))(2))(4)] were isolated. The spectroscopic and structural data of these complexes revealed that the 1,1-difluoroallene ligand is coordinated exclusively with the double bond containing the hydrogen-substituted carbon atom. 1,1-Difluoroallene and tetrafluoroallene proved to be powerful pi acceptor ligands.     

C-H activation and C=C double bond formation reactions in iridium ortho-methyl arylphosphane complexes

The Vaska-type iridium(I) complex [IrCl(CO){PPh(2)(2-MeC(6)H(4))}(2)] (1), characterized by an X-ray diffraction study, was obtained from iridium(III) chloride hydrate and PPh(2)(2,6-MeRC(6)H(3)) with R=H in DMF, whereas for R=Me, activation of two ortho-methyl groups resulted in the biscyclometalated iridium(III) compound [IrCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)] (2). Conversely, for R=Me the iridium(I) compound [IrCl(CO){PPh(2)(2,6-Me(2)C(6)H(3))}(2)] (3) can be obtained by treatment of [IrCl(COE)(2)](2) (COE=cyclooctene) with carbon monoxide and the phosphane in acetonitrile. Compound 3 in CH(2)Cl(2) undergoes intramolecular C-H oxidative addition, affording the cyclometalated hydride iridium(III) species [IrHCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}] (4). Treatment of 2 with Na[BAr(f) (4)] (Ar(f)=3,5-C(6)H(3)(CF(3))(2)) gives the fluxional cationic 16-electron complex [Ir(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)][BAr(f) (4)] (5), which reversibly reacts with dihydrogen to afford the delta-agostic complex [IrH(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}][BAr(f)(4)] (6), through cleavage of an Ir-C bond. This species can also be formed by treatment of 4 with Na[BAr(f)(4)] or of 2 with Na[BAr(f)(4)] through C-H oxidative addition of one ortho-methyl group, via a transient 14-electron iridium(I) complex. Heating of the coordinatively unsaturated biscyclometalated species 5 in toluene gives the trans-dihydride iridium(III) complex [IrH(2)(CO){PPh(2)(2,6-MeC(6)H(3)CH=CHC(6)H(3)Me-2,6)PPh(2)}][BAr(f) (4)] (7), containing a trans-stilbene-type terdentate ligand, as result of a dehydrogenative carbon-carbon double bond coupling reaction, possibly through an iridium carbene species.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Taking TiF4 complexes to extremes--the first examples with phosphine co-ligands

The first soft donor adducts of TiF(4), [TiF(4)(diphosphine)] (diphosphine = o-C(6)H(4)(PMe(2))(2), R(2)P(CH(2))(2)PR(2), R = Me or Et) have been prepared from [TiF(4)(MeCN)(2)] and the diphosphines in rigorously anhydrous CH(2)Cl(2), as extremely moisture sensitive yellow solids, and characterised by multinuclear NMR ((1)H, (31)P, (19)F), IR and UV/vis spectroscopy. The crystal structure of [TiF(4){Et(2)P(CH(2))(2)PEt(2)}] has been determined and shows a distorted six-coordinate geometry with disparate Ti-F(transF) and Ti-F(transP) distances and long Ti-P bonds. Weaker soft donor ligands including Ph(3)P, Ph(2)P(CH(2))(2)PPh(2), o-C(6)H(4)(PPh(2))(2), Ph(2)As(CH(2))(2)AsPh(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr do not form stable complexes with TiF(4), although surprisingly, fluorotitanate(IV) salts of the previously unknown doubly protonated ligand cations [LH(2)][Ti(4)F(18)] (L = o-C(6)H(4)(PPh(2))(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr) are formed in some cases as minor by-products. The structure of [o-C(6)H(4)(PPh(2)H)(2)][Ti(4)F(18)] shows the first authenticated example of a diprotonated o-phenylene-diphosphine. The synthesis and full spectroscopic characterisation are reported for a range of TiF(4) adducts with hard N- or O-donor ligands for comparison purposes, along with crystal structures of [TiF(4)(thf)(2)], [TiF(4)(Ph(3)EO)(2)]·2CH(2)Cl(2) (E = P or As), and [TiF(4)(bipy)].     

Azametallacycles from Ag(I)- or Cu(II)-promoted coupling reactions of dialkylcyanamides with oximes at Pt(II)

The dialkylcyanamide complexes cis-[PtCl(NCNR(2))(PPh(3))(2)][BF(4)] 1 and cis-[Pt(NCNR(2))(2)(PPh(3))(2)][BF(4)](2) 2 (R = Me or Et) have been prepared by treatment of a CH(2)Cl(2) solution of cis-[PtCl(2)(PPh(3))(2)] with the appropriate dialkylcyanamide and one or two equivalents of Ag[BF(4)], respectively. Compounds 2 can also be obtained from 1 by a similar procedure. Their reaction with oximes, HON=CR'R' ' (R'R' ' = Me(2) or C(4)H(8)), in CH(2)Cl(2) and in the presence of Ag[BF(4)] or Cu(CH(3)COO)(2), leads to the novel type of azametallacycles cis-[Pt(NH=C(ON=CR'R")-NR2)(PPh3)2][BF4]2 4 upon an unprecedented coupling of the organocyanamides with oximes, in a process that proceeds via the mixed oxime-organocyanamide species cis-[Pt(NCNR(2))(HON=CR'R' ')(PPh(3))(2)][BF(4)](2) 3, and is catalyzed by either Ag(+) or Cu(2+) which activate the ligating organocyanamide by Lewis acid addition to the amide group. In contrast, in the organonitrile complexes cis-[Pt(NCR)(2)(PPh(3))(2)][BF(4)](2) 5 (R = C(6)H(4)OMe-4 or Et), obtained in a similar way as 2 (but by using NCR instead of the cyanamide), the ligating NCR is not activated by the Lewis acid and does not couple with the oximes. The spectroscopic properties of those complexes are reported along with the molecular structures of 2b (R = Et), 4a1 (R = Me, R'R' ' = Me(2)), and 4b1 (R = Et, R'R' ' = Me(2)), as established by X-ray crystallography which indicates that in the former complex the amide-N-atoms are trigonal planar, whereas in the latter (4a1 and 4b1) the five-membered rings are planar with a localized N=C double bond (imine group derived from the cyanamide) and the exocyclic amide and alkylidene groups (in 4b1) are involved in two intramolecular H-bonds to the oxygen atom of the ring.     

Novel concentration-driven structural interconversion in shape-specific solids supported by the octahedral [Re(6)(mu3-Se)8]2+ cluster core

A complex containing the face-capped octahedral [Re(6)(mu(3)-Se)(8)](2+) cluster core, cis-[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](SbF(6))(2) (1), is used as a ditopic ligand with an enforced right angle between the two 4,4'-dipyridyl moieties for the coordination of Cd(2+) ion. Two coordination polymers, [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](2)[Cd(NO(3))(2)]](SbF(6))(4).21C(4)H(10)O.21CH(2)Cl(2) (2) and [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)][Cd(NO(3))(3)]](NO(3)).2C(4)H(10)O.CH(2)Cl(2) (3), are obtained. The relative concentration of Cd(2+) determines which species is isolated, and the conversion of the first structure into the second is demonstrated experimentally.     

Acceptor (CF3)PCPH pincer reactivity with (PPh3)3Ir(CO)H

The syntheses of Ir(I) and Ir(III) complexes incorporating the electron-withdrawing pincer ligand (1,3-C(6)H(4)(CH(2)P(CF(3))(2))(2)) ((CF(3))PCPH) with (PPh(3))(3)Ir(CO)H and subsequent chemistry are reported. Under ambient conditions, reaction of 1 equiv. (CF(3))PCPH with (PPh(3))(3)Ir(CO)H gave the mono-bridged complex [Ir(CO)(PPh(3))(2)(H)](2)(μ-(CF(3))PCPH) (1). Reaction of (PPh(3))(3)Ir(CO)H with excess (CF(3))PCPH and MeI gave the doubly-bridged complex [Ir(CO)(PPh(3))(H)](2)(μ-(CF(3))PCPH)(2) (2), whereas the tetrameric oligomer [Ir(CO)(PPh(3))(H)](4)(μ-(CF(3))PCPH)(4) (2-sq) was obtained from a 1:1 ligand:metal mixture in benzene in the presence of excess MeI. At higher temperatures (165 °C) the reaction of (CF(3))PCPH with (PPh(3))(3)Ir(CO)H afforded the 5-coordinate Ir(I) complex ((CF(3))PCP)Ir(CO)(PPh(3)) (3). Complex 3 shows mild catalytic activity for the decarbonylation of 2-naphthaldehyde in refluxing diglyme (162 °C).     

Preparation, Molecular and Electronic Structures, and Magnetic Properties of Face-Sharing Bioctahedral Titanium(III) Compounds: [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PR(3))(2)

Reduction of TiCl(4) with 1 equiv of HSnBu(3) followed by addition of [PPh(4)]Cl and then PR(3) leads to two new dinuclear titanium(III) compounds, [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PR(3))(2)] (R = Et and R(3) = Me(2)Ph), both of which contain an anion with the face-sharing bioctahedral type structure. Their crystal structures are reported. [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PEt(3))(2)].2CH(2)Cl(2) crystallized in the triclinic space group P&onemacr;. Cell dimensions: a = 12.461(1) ?, b = 20.301(8) ?, c = 11.507(5) ?, alpha = 91.44 degrees, beta = 113.27(1) degrees, gamma = 104.27(2) degrees, and Z = 2. The distance between titanium atoms is 3.031(2) ?. [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PMe(2)Ph)(2)].CH(2)Cl(2) also crystallized in the triclinic space group P&onemacr; with cell dimensitions a = 11.635(4) ?, b = 19.544(3) ?, c = 11.480(3) ?, alpha = 100.69(2) degrees, beta = 109.70(1) degrees, gamma = 95.08(2) degrees, and Z = 2. The distance between titanium atoms in this compound is 2.942(1) ?. Variable temperature magnetic susceptibilities were measured for [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PEt(3))(2)]. Electronic structure calculations were carried out for a model ion, [Ti(2)(&mgr;-Cl)(3)Cl(4)(PH(3))(2)](-), and another well-known anion, [Ti(2)(&mgr;-Cl)(3)Cl(6)](3)(-), by employing an ab initio configuration interaction method. The results of the calculations reveal that the metal-metal interaction in these Ti(III) face-sharing compounds can be best described by strong antiferromagnetic coulping that leads to a singlet ground state and a thermally accessible triplet first excited state. Accordingly the measured magnetic data were satisfactorily fitted to a spin-only formula.     

Synthesis and reactivity of the hydrido- and alkylrhenium methylidene complexes Cp*(PMe3)2(R)Re=CH2 (R = H, CH3)

Protonolysis of the dimethylrhenium(III) compound Cp(PMe(3))(2)Re(CH(3))(2) (3) led to formation of the highly reactive hydridorhenium methylidene compound [Cp(PMe(3))(2)Re(CH(2))(H)][OTf] (4), which was characterized spectroscopically at low temperature. Although 4 decomposed above -30 degrees C, reactivity studies performed at low temperature indicated it was in equilibrium with the coordinatively unsaturated methylrhenium complex [Cp(PMe(3))(2)Re(CH(3))][OTf] (2). Methylidene complex 4 was found to react with PMe(3) to afford [Cp(PMe(3))(3)Re(CH(3))][OTf] (6) and with chloride anion to give Cp(PMe(3))(2)Re(Me)Cl (7). When BAr(f) anion was added to 4, the thermally stable methylrhenium methylidene complex [Cp(PMe(3))(2)Re(CH(2))(CH(3))][BAr(f)] (8) was isolated upon warming to room temperature. The mechanisms of formation of both 4 and 8 are discussed in detail, including DFT calculations. The novel carbonyl ligated complex Cp(CO)(2)Re(CH(3))OTf (12) was prepared, isolated, and found to not undergo migration reactions to form methylidene complexes.     

Synthetic and structural studies of the coordination behavior of 2-pyridylbis(diphenylphosphino)methane

The coordination chemistry of the potentially semilabile tridentate ligand 2-pyridylbis(diphenylphosphino)methane (NPP) has been investigated. Bidentate (N, P) coordination occurs in CoCl(2)(NPP) (1) and [CdX(mu-X)(NPP)](2) (X = Cl (2); OAc (3)), prepared from the corresponding metal salts, in fac-Re(CO)(3)Br(NPP) (4) and in Fe(CO)(2)(MA)(NPP) (6). The last is one of three products from the reaction of Fe(CO)(4)(MA) (MA = maleic anhydride) with NPP, the other two being Fe(CO)(3)(NPP) (7; P, P coordinated) and the unusual cyclic ylid Ph2PC(2-C5H4N)PPh2C(CH2CO2H)C(=O)(5). The ligand shows tridentate coordination in Cr(CO)(3)(NPP) (9), RuCl(2)(PPh(3))(NPP) (10), and possibly in PtCl(2)(NPP) (8). Carbon monoxide displaces one phosphorus arm of the ligand in 10. Anhydrous NiCl(2) and NPP react in the presence of methanol to give NiCl(2)(P(OMe)Ph(2))(Ph(2)PCH(2)py) (12) in which the NPP ligand has been cleaved. This in turn reacts with O(2) to form trans-NiCl(2)(Ph(2)P(O)CH(2)py)(2) (13). The methine proton of NPP is transferred to the metal on reaction with Pt(C(2)H(4))(PPh(3))(2) and [Ir(COD)(NPP)]BF(4) to form the hydride complexes Pt(H)(PPh(3))(NPP-H) (14) and [Ir(H)(NPP)(NPP-H)]BF(4) (15). In 15 the intact NPP ligand is tridentate. The structures of 1 - 7 and 12 - 15 have been determined.     

Facile carbon-fluorine bond activation and subsequent functionalisation of 1,1-difluoroethylene and tetrafluoroethylene promoted by adjacent metal centres

The bridging fluoroolefin ligands in the complexes [Ir(2)(CH(3))(CO)(2)(μ-olefin)(dppm)(2)][OTf] (olefin = tetrafluoroethylene, 1,1-difluoroethylene; dppm = μ-Ph(2)PCH(2)PPh(2); OTf(-) = CF(3)SO(3)(-)) are susceptible to facile fluoride ion abstraction. Both fluoroolefin complexes react with trimethylsilyltriflate (Me(3)SiOTf) to give the corresponding fluorovinyl products by abstraction of a single fluoride ion. Although the trifluorovinyl ligand is bound to one metal, the monofluorovinyl group is bridging, bound to one metal through carbon and to the other metal through a dative bond from fluorine. Addition of two equivalents of Me(3)SiOTf to the tetrafluoroethylene-bridged species gives the difluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-OTf)(μ-C=CF(2))(dppm)(2)][OTf]. The 1,1-difluoroethylene species is exceedingly reactive, reacting with water to give 2-fluoropropene and [Ir(2)(CO)(2)(μ-OH)(dppm)(2)][OTf] and with carbon monoxide to give [Ir(2)(CO)(3)(μ-κ(1):η(2)-C≡CCH(3))(dppm)(2)][OTf] together with two equivalents of HF. The trifluorovinyl product [Ir(2)(κ(1)-C(2)F(3))(OTf)(CO)(2)(μ-H)(μ-CH(2))(dppm)(2)][OTf], obtained through single C-F bond activation of the tetrafluoroethylene-bridged complex, reacts with H(2) to form trifluoroethylene, allowing the facile replacement of one fluorine in C(2)F(4) with hydrogen.     

High hydride count rhodium octahedra, [Rh6(PR3)6H12][BArF4]2: synthesis, structures, and reversible hydrogen uptake under mild conditions

A new class of transition metal cluster is described, [Rh(6)(PR(3))(6)H(12)][BAr(F)(4)](2) (R = (i)Pr (1a), Cy (2a); BAr(F)(4) = [B{C(6)H(3)(CF(3))(2)}(4)](-)). These clusters are unique in that they have structures exactly like those of early transition metal clusters with edge-bridging pi-donor ligands rather than the structures expected for late transition metal clusters with pi-acceptor ligands. The solid-state structures of 1a and 2a have been determined, and the 12 hydride ligands bridge each Rh-Rh edge of a regular octahedron. Pulsed gradient spin-echo NMR experiments show that the clusters remain intact in solution, having calculated hydrodynamic radii of 9.5(3) A for 1a and 10.7(2) A for 2a, and the formulation of 1a and 2a was unambiguously confirmed by ESI mass spectrometry. Both 1a and 2a take up two molecules of H(2) to afford the cluster species [Rh(6)(P(i)Pr(3))(6)H(16)][BAr(F)(4)](2) (1b) and [Rh(6)(PCy(3))(6)H(16)][BAr(F)(4)](2) (2b), respectively, as characterized by NMR spectroscopy, ESI-MS, and, for 2b, X-ray crystallography using the [1-H-CB(11)Me(11)](-) salt. The hydride ligands were not located by X-ray crystallography, but (1)H NMR spectroscopy showed a 15:1 ratio of hydride ligands, suggesting an interstitial hydride ligand. Addition of H(2) is reversible: placing 1b and 2b under vacuum regenerates 1a and 2a. DFT calculations on [Rh(6)(PH(3))(6)H(x)()](2+) (x = 12, 16) support the structural assignments and also show a molecular orbital structure that has 20 orbitals involved with cluster bonding. Cluster formation has been monitored by (31)P{(1)H} and (1)H NMR spectroscopy, and mechanisms involving heterolytic H(2) cleavage and elimination of [HP(i)Pr(3)](+) or the formation of trimetallic intermediates are discussed.     

Synthesis and reactivity of bridging and terminal hydrosulfido palladium and platinum complexes. Crystal structures of [NBu4]2[(Pt(c6F5)2(mu-SH)]2], [Pt(C6F5)2(PPh3)[S(H)AgPPh3]], and [Pt(C6F5)2(PPh3)[S(AuPPh3)2]

The reactions of the hydroxo complexes [M(2)R(4)(mu-OH)(2)](2)(-) (M = Pd, R = C(6)F(5), C(6)Cl(5); M = Pt, R = C(6)F(5)), [[PdR(PPh(3))(mu-OH)](2)] (R = C(6)F(5), C(6)Cl(5)), and [[Pt(C(6)F(5))(2)](2)(mu-OH)(mu-pz)](2-) (pz = pyrazolate) with H(2)S yield the corresponding hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-), [[PdR(PPh(3))(mu-SH)](2)], and [[Pt(C(6)F(5))(2)](2)(mu-SH)(mu-pz)](2-), respectively. The monomeric hydrosulfido complexes [M(C(6)F(5))(2)(SH)(PPh(3))](-) (M = Pd, Pt) have been prepared by reactions of the corresponding binuclear hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-) with PPh(3) in the molar ratio 1:2, and they can be used as metalloligands toward Ag(PPh(3))(+) to form the heterodinuclear complex [(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and toward Au(PPh(3))(+) yielding the heterotrinuclear complexes [M(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]]. The crystal structures of [NBu(4)](2)[[Pt(C(6)F(5))(2)(mu-SH)](2)], [Pt(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and [Pt(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]] have been established by X-ray diffraction and show no short metal-metal interactions between the metallic centers.