Dianthra[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DATT): synthesis, characterization, and FET characteristics of new π-extended heteroarene with eight fused aromatic rings

A novel highly π-extended heteroarene with eight fused aromatic rings, dianthra[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DATT), was selectively synthesized via a newly developed synthetic strategy, fully characterized by means of single crystal X-ray structural analysis, and examined as an organic semiconductor in thin film transistors. Even with its highly extended acene-like π-system, DATT is a fairly air-stable compound with IP of 5.1 eV. Single crystal X-ray structural analysis revealed its planar molecular structure and the lamella-like layered structure with typical herringbone packing. Theoretical calculations of the solid state electronic structure based on the bulk single crystal structure suggest that DATT affords almost comparable intermolecular orbital couplings between HOMOs (t(HOMO)) with those of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT), implying its good potential as an organic semiconductor for organic field-effect transistors. In fact, field-effect mobilities as high as 3.0 cm(2) V(-1) s(-1) were achieved with vapor-processed DATT-based devices, which is comparable with that of DNTT-based devices. The molecular ordering of DATT in the thin film state, however, turned out to be not completely uniform; as elucidated by in-plane and out-of-plane XRD measurements, the face-on molecular orientation was contaminated in the edge-on orientation, the former of which is not optimal for efficient carrier transport and thus could limit the mobility.     

Effect of Materials Parameters on the Shape of Face-On Lamellae in Semi-Conducting Polymers: Insights From Qualitative Theory

Polymer semiconductors frequently form crystals or mesophases with lamellae, that comprise alternating layers of stacked backbones and side chains. Controlling lamellar orientation in films is essential for obtaining efficient charge carrier transport. Herein, lamellar orientation is investigated in an application-relevant setup: lamellae assembled on a substrate that strongly favors face-on orientation, but exposed to a film surface that promotes orientation along an “easy” direction, other than face on. It is assumed that the face-on order propagates from the substrate, but the lamellae bend to reduce their surface energy. A qualitative free-energy model is developed. The deformation is investigated as a function of film thickness, effective Young modulus, anchoring coefficient, and easy direction at the free surface. The calculations highlight the importance of elastic constants – lamellae can substantially deform already when Young moduli are only an order of magnitude smaller than the values that are reported for crystals. Softer Young moduli are expected when lamellar assembly occurs in a non-solidified mesophase that can be an equilibrium or (more speculatively) a transient state prior to crystallization. The alternative scenario of a two-layered film is also evaluated, where edge-on and face-on grains form, respectively, at the free surface and substrate.     

Influence of molecular order on the local work function of nanographene architectures: a Kelvin-probe force microscopy study.

We report a Kelvin-probe force microscopy (KPFM) investigation on the structural and electronic properties of different submicron-scale supramolecular architectures of a synthetic nanographene, including extended layers, percolated networks and broken patterns grown from solutions at surfaces. This study made it possible to determine the local work function (WF) of the different pi-conjugated nanostructures adsorbed on mica with a resolution below 10 nm and 0.05 eV. It revealed that the WF strongly depends on the local molecular order at the surface, in particular on the delocalization of electrons in the pi-states, on the molecular orientation at surfaces, on the molecular packing density, on the presence of defects in the film and on the different conformations of the aliphatic peripheral chains that might cover the conjugated core. These results were confirmed by comparing the KPFM-estimated local WF of layers supported on mica, where the molecules are preferentially packed edge-on on the substrate, with the ultraviolet photoelectron spectroscopy microscopically measured WF of layers adsorbed on graphite, where the molecules should tend to assemble face-on at the surface. It appears that local WF studies are of paramount importance for understanding the electronic properties of active organic nanostructures, being therefore fundamental for the building of high-performance organic electronic devices, including field-effect transistors, light-emitting diodes and solar cells.     

Thickness-dependent molecular chain and lamellar crystal orientation in ultrathin poly(di-n-hexylsilane) films

The molecular chain and lamellar crystal orientation in ultrathin films (thickness < 100 nm) of poly-(di-n-hexylsilane) (PDHS) on silicon wafer substrates have been investigated by using transmission electronic microscopy, wide-angle X-ray diffraction, atomic force microscopy, and UV absorption spectroscopy. PDHS showed a film thickness-dependent molecular chain and lamellar crystal orientation. Lamellar crystals grew preferentially in flat-on orientation in the monolayer ultrathin films of PDHS, i.e., the silicon backbones were oriented along the surface-normal direction. By contrast, the orientation of lamellar crystals was preferentially edge-on in ultrathin films thicker than ca. 13 nm, i.e., the silicon backbones were oriented parallel to the substrate surface. We interpret the different orientations of molecular chain and lamellar crystal as due to the reduction of the entropy of the polymer chain near the substrate surface and the particularity of the crystallographic (001) plane of flat-on lamellae, respectively. A remarkable influence of the orientations of the silicon backbone on the UV absorption of these PDHS ultrathin films was observed due to the one-dimensional nature of sigma-electrons delocalized along the silicon backbone. With the silicon backbones perpendicular or parallel to the surface of the substrate, the UV absorbance increased or decreased with an increase of the angle between the incident UV beam direction and direction normal to the thin film, respectively.     

Enhancement of thermoelectric properties of D-A conjugated polymer through constructing random copolymers with more electronic donors

Developing new D-A conjugated polymer system for thermoelectric (TE) application is highly desirable. Herein, a series of random copolymers by incorporating 3,4-ethylenedioxythiophene (EDOT) electron rich units into a diketopyrrolopyrrole (DPP) D-A conjugated polymer were designed and synthesized. Compared to the alternating conjugated copolymer PDPP-3T, the HOMO level of the random copolymers are increased as part of the electron deficiency acceptor DPP units in the polymer chain were superseded by electron rich EDOT, which could contribute to effective p-doping. Moreover, through incorporating EDOT to construct random copolymers, it can also induce an orientation change from face-on dominated to edge-on dominated orientation as well as enhance the packing of copolymer chains, which is beneficial to the charge transport. Under same doping condition, the electrical conductivities of the doped polymers increase and the Seebeck coefficient decrease as the increasing of EDOT content, resulting in an optimized power factor of 6.4 μW m⁻¹ K⁻² for the random polymer with EDOT content of 40% which is four times higher than that of alternating conjugated copolymer PDPP-3T. These results demonstrated that constructing random copolymers by incorporating more electronic donors into D-A conjugated polymers may be a promising strategy for developing TE conjugated polymers.     

Controlled conjugated backbone twisting for an increased open-circuit voltage while having a high short-circuit current in poly(hexylthiophene) derivatives

Conjugated polymers with nearly planar backbones have been the most commonly investigated materials for organic-based electronic devices. More twisted polymer backbones have been shown to achieve larger open-circuit voltages in solar cells, though with decreased short-circuit current densities. We systematically impose twists within a family of poly(hexylthiophene)s and examine their influence on the performance of polymer:fullerene bulk heterojunction (BHJ) solar cells. A simple chemical modification concerning the number and placement of alkyl side chains along the conjugated backbone is used to control the degree of backbone twisting. Density functional theory calculations were carried out on a series of oligothiophene structures to provide insights on how the sterically induced twisting influences the geometric, electronic, and optical properties. Grazing incidence X-ray scattering measurements were performed to investigate how the thin-film packing structure was affected. The open-circuit voltage and charge-transfer state energy of the polymer:fullerene BHJ solar cells increased substantially with the degree of twist induced within the conjugated backbone--due to an increase in the polymer ionization potential--while the short-circuit current decreased as a result of a larger optical gap and lower hole mobility. A controlled, moderate degree of twist along the poly(3,4-dihexyl-2,2':5',2'-terthiophene) (PDHTT) conjugated backbone led to a 19% enhancement in the open-circuit voltage (0.735 V) vs poly(3-hexylthiophene)-based devices, while similar short-circuit current densities, fill factors, and hole-carrier mobilities were maintained. These factors resulted in a power conversion efficiency of 4.2% for a PDHTT:[6,6]-phenyl-C(71)-butyric acid methyl ester (PC(71)BM) blend solar cell without thermal annealing. This simple approach reveals a molecular design avenue to increase open-circuit voltage while retaining the short-circuit current.     

Langmuir monolayers of a photoisomerizable macrocycle surfactant

An amphiphilic photoisomerizable macrocycle has been prepared that forms stable Langmuir monolayers at the air-water interface. The hydrophilic core of the molecule switches between closed and open isomers upon irradiation by the appropriate wavelengths of light. Isotherm measurements, Brewster angle microscope images, and atomic force micrographs (of transferred Langmuir-Blodgett films) suggest a phase transition between a face-on to a tilted edge-on molecular orientation as a function of surface concentration. In the face-on phase, in situ photoisomerization results in a reversible increase in surface pressure due to greater molecular crowding in the open configuration.     

Nanoarchitectonics on Electrosynthesis and Assembly of Conjugated Metallopolymers

In contrast to edge-on and face-on orientations, end-on uniaxial conjugated polymers have the theoretical possibility of providing a macroscopic crystalline film. However, their fabrication is insurmountable due to sluggishly thermodynamic equilibrium states. Herein, we report the programmatic pathway to fabricate nanoarchitectonics on end-on uniaxial conjugated metallopolymers by surface-initiated simultaneous electrosynthesis and assembly. Self-assembled monolayer (SAM) with bottom-up oriented electroactive molecules as a temple allows orientation, stacking, and reactive addition of monomers triggered by switching alternative redox reactions as well as crystallization of small molecules. Repeating the same reaction can repair the unreactive site on the SAM and dynamically and statistically ensure maximum iterative coverage with ideal linear coefficients between optical or electrical responses and iterative times. The resulting nanoarchitectonics on uniaxially assembled end-on polymers over centimeter-sized areas have a subnanometer-uniform morphology and exhibit ultrahigh modulus as well as an inorganic indium tin oxides and the highest conductance among conjugated molecular monolayers. Their memristive devices provide quantitative electrical and optical responses as a function of molecular length, bias, and iterative junctions. Precise processing of nanoarchitectonics as an electrically assisted assembly or printing technique can present sophisticated optoelectric functions and dimensional batch-to-batch consistency for micro-sized organic materials and electronics.     

Nanostructure dependence of field-effect mobility in regioregular poly(3-hexylthiophene) thin film field effect transistors

Low polydispersity regioregular polythiophenes with number average molecular weights ranging from 2 to 13 kDa were cast under the same conditions from solution to form a series of field effect transistors (FETs). Tapping mode AFM and grazing incidence small-angle X-ray scattering revealed that in all cases the polymers formed regular nanofibrillar morphologies with the width of nanofibrils proportional to the weight average contour length of polymer chains, indicating that conjugated backbones were oriented perpendicular to the nanofibril axes. FET charge carrier mobilities exhibited exponential dependence on nanofibril width, pointing to the decisive role of extended conjugated pathways in charge transport.     

Supramolecular ordering of tripod dyes at the air/water interface

Monolayers of 2-(3,4,5-(trisdodecyloxyl)phenyl)[1,3,4]oxadiazole based "tripod" dye, P2G, has been studied at the air/water interface with in situ X-ray reflectivity. Compression of the disordered Langmuir-Blodgett monolayer film induces a transition to a unique ordered phase, representing a supramolecular assembly with a unique spatial distribution and orientation of the molecules. At low pressure, the molecules having face-on orientation are interdigitated by the three arms. After first transition in the pi-A isotherm, the molecular conformation is turned into an edge-on orientation, where the molecules are self-assembled into supramolecular structures.     

Siloxane-terminated solubilizing side chains: bringing conjugated polymer backbones closer and boosting hole mobilities in thin-film transistors

We introduce a novel siloxane-terminated solubilizing group and demonstrate its effectiveness as a side chain in an isoindigo-based conjugated polymer. An average hole mobility of 2.00 cm(2) V(-1) s(-1) (with a maximum mobility of 2.48 cm(2) V(-1) s(-1)), was obtained from solution-processed thin-film transistors, one of the highest mobilities reported to date. In contrast, the reference polymer with a branched alkyl side chain gave an average hole mobility of 0.30 cm(2) V(-1) s(-1) and a maximum mobility of 0.57 cm(2) V(-1) s(-1). This is largely explained by the polymer packing: our new polymer exhibited a π-π stacking distance of 3.58 ?, while the reference polymer showed a distance of 3.76 ?.     

Control of the interchain pi-pi interaction and electron density distribution at the surface of conjugated poly(3-hexylthiophene) thin films

Interchain interaction, i.e., pi-pi stacking, can benefit the carrier transport in conjugated regio-regular poly(3-hexylthiophene) (P3HT) thin films. However, the existence of the insulating side hexyl chains in the surface region may be detrimental to the charge transfer between the polymer backbone and overlayer molecules. The control of the molecular orientation in the surface region is expected to alter the distribution of the pi electron density at the surface to solve such problems, which can be achieved by controlling the solvent removal rate during solidification. The evidence that the pi-electron density distribution at the outermost surface can be controlled is demonstrated by the investigation using the powerful combination of near edge X-ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and the most surface-sensitive technique: Penning ionization electron spectroscopy. From the spectroscopic studies, it can be deduced that the slower removal rate of the solvent makes the polymer chains even at the surface have sufficient time to adopt a more nearly equilibrium structure with edge-on conformation. Thus, the side hexyl chains extend outside the surface, which buries the pi-electron density contributed from the polymer backbone. Contrarily, the quench of obtaining a thermo-equilibrium structure in the surface region due to the faster removal of the solvent residual can lead to the surface chain conformation without persisting to the strong bulk orientation preference. Therefore, the face-on conformation of the polymer chain at the surface of thin films coated with high spin coating speed facilitate the electron density of the polymer backbone exposed outside the surface. Finally, thickness dependence of the surface electronic structure of P3HT thin films is also discussed.     

Molecular ordering in a biaxial smectic-A phase studied by scanning transmission X-ray microscopy (STXM)

Results of STXM investigations of a binary mixture (-TNF = 2 : 1; SmA(b) 140 M 180 Iso) known to form a SmA(b) phase [T. Hegmann, J. Kain, S. Diele, G. Pelzl and C. Tschierske, Angew. Chem. Int. Ed., 2001, 40, 887] are presented. Near edge X-ray absorption fine spectra (NEXAFS) of the -TNF board-like aggregates, in particular the intensity of the low energy peaks associated with aromatic ring pi* orbitals (284.5-286.5 eV), show that the molecular plane of these aggregates is very sensitive to the relative orientation of electric field vector E of linearly polarized light, which is used to determine the molecular orientation in the LC phase. The observed strong in-plane dichroic signal suggests the predominant orientation of the -TNF aggregates to be along the smectic layer normal as well as long-range ordering of the in-plane molecular orientation (biaxiality). Orientational maps derived from series of measurements at different sample rotation angles around the specimen normal clearly show a Schlieren-type texture, and permit a detailed examination of exclusive +/-(1/2) disclination theoretically predicted for the SmA(b) phase.     

Molecular Stacking and Aggregation Optimization of Photoactive Layer through Solid Additive Enables High-Performance Organic Solar Cells

Regulating molecular packing and aggregation of photoactive layer is a critical but challenging issue in developing high-performance organic solar cells. Herein, two structurally similar analogues of anthra[2,3-b : 6,7-b′]dithiophene (ADT) and naphtho[1,2-b : 5,6-b′]dithiophene (NDT) are developed as solid additive to exploit their effect in regulating the molecular aggregation and π-stacking of photoactive layer. We clarify that the perpendicular arrangements of NDT can enlarge the molecular packing space and improve the face-on stacking of Y6 during the film formation, favoring a more compact and ordered long-range π-π stacking in the out-of-plane direction after the removal of NDT under thermal annealing. The edge-to-face stacked herringbone-arrangement of ADT along with its non-volatilization under thermal annealing can induce the coexistence of face-on and edge-on stacking of blend film. As a result, the NDT treatment shows encouraging effect in improving the photovoltaic performance of devices based on various systems. Particularly, a remarkable PCE of 18.85 % is achieved in the PM6 : L8-BO-based device treated by NDT additive, which is a significant improvement with regard to the PCE of 16.41 % for the control device. This work offers a promising strategy to regulate the molecular packing and aggregation of photoactive layer towards significantly improved performance and stability of organic solar cells.     

Influence of lattice dynamics on charge transport in the dianthra[2,3-b:2',3'-f]-thieno[3,2-b]thiophene organic crystals from a theoretical study

The influence of lattice dynamics on carrier mobility has received much attention in organic crystalline semiconductors, because the molecular components are held together by weak interactions and the transfer integrals between neighboring molecular orbitals are extremely sensitive to small nuclear displacements. Recently, it has been shown that the dynamic disorder has little effect on hole mobility in the ab plane of pentacene, but a reasonable explanation is absent for such a puzzle. To better understand the effect of lattice vibrations on carrier transport, a further study is required for other organic materials. In this work, a mixed molecular dynamic and quantum-chemical methodology is used to assess the effect of nuclear dynamics on hole mobility in the dianthra[2,3-b:2',3'-f]-thieno[3,2-b]thiophene (DATT) crystals which exhibit high air stability with the hole mobility as large as that in rubrene-based devices. It is found that the lattice vibrations lead to an increasing encumbrance for hole transport in the ab plane of the DATT crystals as the temperature increases. By comparing the crystal structures of DATT and pentacene, the reduced hole mobility in DATT is attributed to the unsymmetric arrays of nearest-neighboring molecular dimers in the ab plane, because the electronic coupling exhibits unbalanced thermal fluctuations for the nearest-neighboring dimers which then induces a stronger oscillation for carriers along the directions with asymmetric packing. To further relate the dynamic disorder with hole transport, the variations of anisotropic mobilities are also analyzed. As a result, the negligible effect of lattice dynamics on the hole mobility in pentacene is explained by the centrosymmetric molecular packing of the nearest-neighboring molecular pairs in the ab plane.     

Direct arylation polymerization toward ultra‐low bandgap poly(thienoisoindigo‐alt‐diketopyrrolepyrrole) conjugated polymers: The effect of β‐protection on the polymerization and properties of the polymers

Direct arylation polymerization between derivatives of dibromodiketopyrrolopyrrole (DPP) and thienoisoindigo (TIIG) resulted in two π‐conjugated copolymers with average molecular weights up to 24.0 kDa and bandgaps as low as 0.8 eV. The structural analysis of the obtained two polymers revealed well‐defined alternating conjugation backbones without obvious structural defects. The introduction of hexyl‐group in the β‐position of thiophene rings in the DPP units not only reduces the bandgap of conjugated polymer compared to a similar polymer containing bare‐thiophene flanked DPP but also affects polymer morphology in thin films. P‐type charge‐transport characteristics were observed for two polymers in organic field‐effect transistors with comparable hole mobilities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3205–3213     

聚(ε-己内酯)薄膜结晶形貌及分子取向研究

用匀胶机通过溶液铸膜方法在硅片和铝箔基板上分别制备具有不同厚度的聚(ε-己内酯)(PCL)薄膜. 通过原子力显微镜(AFM)和偏光衰减全反射傅里叶红外光谱(ATR-FTIR)对薄膜中PCL的结晶形貌、 片晶生长方式及分子链取向进行了研究. AFM结果表明, 在200 nm或更厚的薄膜中, PCL主要以侧立(edge-on)片晶的方式生长; 对于厚度小于200 nm的薄膜, PCL片晶更倾向于以平躺(flat-on)的方式生长. 这种片晶生长方式的改变在硅片和铝箔基板上都表现出同样的倾向. 此外, 在15 nm或更薄的薄膜中, PCL结晶由通常的球晶结构变为树枝状晶体. 偏光ATR-FTIR结果表明, 当膜厚小于200 nm时, 薄膜结晶中PCL分子链沿垂直于基板表面方向取向, 并且膜越薄, 取向程度越高, 与AFM的观测结果一致.     

Crystal structure of friction-transferred poly(2,5-dioctyloxy-1,4-phenylenevinylene)

Poly(2,5-dioctyloxy-1,4-phenylenevinylene) (DOPPV) was found to form a highly oriented film by a friction-transfer technique. Structural investigation of friction-transferred DOPPV was studied by means of polarized ultraviolet-visible (UV-vis) absorption spectroscopy, polarized photoluminescence (PL) spectroscopy, and synchrotron-sourced grazing incident X-ray diffraction (GIXD) analysis. The polarized UV-vis absorption and PL spectra indicate clear axial alignment. DOPPV backbones in friction-transferred film are highly aligned along the drawing direction of the friction-transfer. Further information of the molecular arrangement in friction-transferred DOPPV film was investigated by both the out-of-plane and the in-plane GIXD analyses with synchrotron source. The DOPPV molecules in friction-transferred films were perfectly arranged three-dimensionally: the backbones aligned along the drawing direction of friction-transfer, the alkyl side chains lay in the film plane, and the planar backbones were arranged parallel to the film surface. Additionally, two neighboring DOPPV molecules along the direction of inter-backbones separation by alkyl side chains were found to be shifted with respect to one another by the mean distance of half of a monomeric repeat.     

侧链含自由基单元的1,4-吡咯并吡咯二酮共轭聚合物的合成和半导体性质研究

合成了两个侧链含有2,2,6,6-四甲基哌啶-1-氧自由基单元(TEMPO)的1,4-吡咯并吡咯二酮(DPP)共轭聚合物PDPP4T-1和PDPP4T-2,并开展了其半导体性质研究。薄膜场效应晶体管器件测试结果显示,相对于不含TEMPO的聚合物PDPP4T,PDPP4T-1和PDPP4T-2的场效应器件性能有所降低,不过,含TEMPO的聚合物器件性能最高仍达到了2.12cm²·V^-1·s^-1。进一步通过原子力显微镜和X射线衍射对TEMPO引入后导致性能降低的可能原因进行了研究。     

Synthetic principles directing charge transport in low-band-gap dithienosilole-benzothiadiazole copolymers

Given the fundamental differences in carrier generation and device operation in organic thin-film transistors (OTFTs) and organic photovoltaic (OPV) devices, the material design principles to apply may be expected to differ. In this respect, designing organic semiconductors that perform effectively in multiple device configurations remains a challenge. Following "donor-acceptor" principles, we designed and synthesized an analogous series of solution-processable π-conjugated polymers that combine the electron-rich dithienosilole (DTS) moiety, unsubstituted thiophene spacers, and the electron-deficient core 2,1,3-benzothiadiazole (BTD). Insights into backbone geometry and wave function delocalization as a function of molecular structure are provided by density functional theory (DFT) calculations at the B3LYP/6-31G(d,p) level. Using a combination of X-ray techniques (2D-WAXS and XRD) supported by solid-state NMR (SS-NMR) and atomic force microscopy (AFM), we demonstrate fundamental correlations between the polymer repeat-unit structure, molecular weight distribution, nature of the solubilizing side-chains appended to the backbones, and extent of structural order attainable in p-channel OTFTs. In particular, it is shown that the degree of microstructural order achievable in the self-assembled organic semiconductors increases largely with (i) increasing molecular weight and (ii) appropriate solubilizing-group substitution. The corresponding field-effect hole mobilities are enhanced by several orders of magnitude, reaching up to 0.1 cm(2) V(-1) s(-1) with the highest molecular weight fraction of the branched alkyl-substituted polymer derivative in this series. This trend is reflected in conventional bulk-heterojunction OPV devices using PC(71)BM, whereby the active layers exhibit space-charge-limited (SCL) hole mobilities approaching 10(-3) cm(2) V(-1) s(-1), and yield improved power conversion efficiencies on the order of 4.6% under AM1.5G solar illumination. Beyond structure-performance correlations, we observe a large dependence of the ionization potentials of the polymers estimated by electrochemical methods on polymer packing, and expect that these empirical results may have important consequences on future material study and device applications.