Multielectron donors based on TTF-phosphine and ferrocene-phosphine hybrid complexes of a hexarhenium(III) octahedral cluster core

Electroactive molecular materials precursors are obtained through coordination chemistry of the hexarhenium cluster core [Re(6)Se(8)](2+) on the six available apical positions with redox-active phosphines bearing tetrathiafulvalene- or ferrocene-based moieties. Single-crystal X-ray diffraction study and electrospray mass spectrometry ascertain the synthesis of these hexasubstituted electroactive clusters, containing up to 12 redox active sites. Cyclic voltammetry experiments demonstrate that these compounds can be reversibly oxidized at rather low potentials, thus allowing an easy access to the corresponding radical species which should provide new conducting and/or magnetic molecular materials.     

Electronic structure and reactivity of a biradical cluster: Sc3O6(-)

The Sc(3)O(6)(-) cluster anions were produced by laser ablation and studied by reaction with n-butane in a fast flow reactor and by photoelectron spectroscopy. The reactivity experiments indicated that one Sc(3)O(6)(-) cluster can activate two n-butane molecules consecutively with rate constants on the order of 10(-10) cm(3) molecule(-1) s(-1) under near room-temperature conditions, suggesting that the even-electron system Sc(3)O(6)(-) has a highly reactive electronic structure. The photoelectron spectroscopy determined a high vertical detachment energy (VDE) of 5.63 ± 0.08 eV for the Sc(3)O(6)(-) cluster. Density functional computations indicated that the lowest energy isomer of Sc(3)O(6)(-) is an oxygen-centered biradical with a high VDE and is highly reactive toward n-butane, which is in good agreement with the experiments. The Sc(3)O(6)(-) cluster may serve as an ideal model system to provide insight into the real-life chemistry involved with the coupled O(-)˙···O(-)˙ dimers over the surfaces of metal oxide catalysts.     

Naked five-coordinate Fe(III)(NO) porphyrin complexes: vibrational and reactivity features

Model ferric heme nitrosyl complexes, [Fe(TPP)(NO)](+) and [Fe(TPFPP)(NO)](+), where TPP is the dianion of 5,10,15,20-tetrakis-phenyl-porphyrin and TPFPP is the dianion of 5,10,15,20-tetrakis-pentafluorophenyl-porphyrin, have been obtained as isolated species by the gas phase reaction of NO with [Fe(III)(TPP)](+) and [Fe(III) (TPFPP)](+) ions delivered in the gas phase by electrospray ionization, respectively. The so-formed nitrosyl complexes have been characterized by vibrational spectroscopy also exploiting (15)N-isotope substitution in the NO ligand. The characteristic NO stretching frequency is observed at 1825 and 1859 cm(-1) for [Fe(III)(TPP)(NO)](+) and [Fe(III)(TPFPP)(NO)](+) ions, respectively, providing reference values for genuine five-coordinate Fe(III)(NO) porphyrin complexes differing only for the presence of either phenyl or pentafluorophenyl substituents on the meso positions of the porphyrin ligand. The vibrational assignment is aided by hybrid density functional theory (DFT) calculations of geometry and electronic structure and frequency analysis which clearly support a singlet spin electronic state for both [Fe(TPP)(NO)](+) and [Fe(TPFPP)(NO)](+) complexes. Both TD-DFT and CASSCF calculations suggest that the singlet ground state is best described as Fe(II)(NO(+)) and that the open-shell AFC bonding scheme contribute for a high-energy excited state. The kinetics of the NO addition reaction in the gas phase are faster for [Fe(III)(TPFPP)](+) ions by a relatively small factor, though highly reliable because of a direct comparative evaluation. The study was aimed at gaining vibrational and reactivity data on five-coordinate Fe(III)(NO) porphyrin complexes, typically transient species in solution, ultimately to provide insights into the nature of the Fe(NO) interaction in heme proteins.     

Preparation and reactivity of a monomeric octahedral platinum(IV) amido complex

Synthesis and isolation of the monomeric octahedral platinum(IV) amido complex (NCN)PtMe2NHPh have been accomplished upon deprotonation of the amine complex [(NCN)PtMe2(NH2Ph)][OTf]. The preliminary reactivity of the amido ligand has been explored.     

Syntheses and X-ray structures of two nitrosyliron clusters [(Ph3P)2N] [Fe6C(CO)15NO] and (Fe6C(CO)11(NO)4]. First example of a carbonyl-nitrosyl cluster with four no ligands

[X]₂[Fe₆C(CO)₁₆] (X = (Ph₃P)₂N or Et₄N) reacts with NOBF₄ in CH₂Cl₂ to give [X] [Fe₆C(CO)₁₅NO]. This complex reacts with an excess of NOBF₄ to give [Fe₆C(CO)₁₁ (NO)₄]. The structures of the two new complexes were determined by X-ray crystallography.     

Homodinuclear iron thiolate nitrosyl compounds [(ON)Fe(S,S-C6H4)2 Fe(NO)2]- and [(ON)Fe(SO2,S-C6H4)(S,S-C6H4)Fe(NO)2]- with {Fe(NO)}7-{Fe(NO)2}9 electronic coupling: new members of a class of dinitrosyl iron complexes

Reaction of Fe(CO)2(NO)2 and [(ON)Fe(S,S-C6H3R)2]- (R = H (1), CH3 (1-Me))/[(ON)Fe(SO2,S-C6H4)(S,S-C6H4)]- (4) in THF afforded the diiron thiolate/sulfinate nitrosyl complexes [(ON)Fe(S,S-C6H3R)2 Fe(NO)2]- (R = H (2), CH3 (2-Me)) and [(ON)Fe(S,SO2-C6H4)(S,S-C6H4)Fe(NO)2]- (3), respectively. The average N-O bond lengths ([Fe(NO)2] unit) of 1.167(3) and 1.162(4) A in complexes 2 and 3 are consistent with the average N-O bond length of 1.165 A observed in the other structurally characterized dinitrosyl iron complexes with an {Fe(NO)2}9 core. The lower nu(15NO) value (1682 cm(-1) (KBr)) of the [(15NO)FeS4] fragment of [(15NO)Fe(S,S-C6H3CH3)2 Fe(NO)2]- (2-Me-15N), compared to that of [(15NO)Fe(S,S-C6H3CH3)2]- (1-Me-15N) (1727 cm(-1) (KBr)), implicates the electron transfer from {Fe(NO)2}10 Fe(CO)2(NO)2 to complex 1-Me/1 may occur in the process of formation of complex 2-Me/2. Then, the electronic structures of the [(NO)FeS4] and [S2Fe(NO)2] cores of complexes 2, 2-Me, and 3 were best assigned according to the Feltham-Enemark notation as the {Fe(NO)}7-{Fe(NO)2}9 coupling (antiferromagnetic interaction with a J value of -182 cm(-1) for complex 2) to account for the absence of paramagnetism (SQUID) and the EPR signal. On the basis of Fe-N(O) and N-O bond distances, the dinitrosyliron {L2Fe(NO)2} derivatives having an Fe-N(O) distance of approximately 1.670 A and a N-O distance of approximately 1.165 A are best assigned as {Fe(NO)2}9 electronic structures, whereas the Fe-N(O) distance of approximately 1.650 A and N-O distance of approximately 1.190 A probably imply an {Fe(NO)2}10 electronic structure.     

Access to an unusual Fe9 core topology from the initial use of tricine in iron(III) cluster chemistry

We describe an enneanuclear Fe(III) complex with an unusual boat-shaped core topology and an S=11/2 ground state, assembled using the ligands tricine {N-(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)glycine, H(4)L} and 2-phenoxybenzoate.     

The helical alanine controversy: an (Ala)6 insertion dramatically increases helicity

Employing chemical shift melts and hydrogen/deuterium exchange NMR techniques, we have determined the stabilization of the Trp-cage miniprotein due to multiple alanine insertions within the N-terminal alpha-helix. Alanine is shown to be uniquely helix-stabilizing and this stabilization is reflected in the global fold stability of the Trp-cage. The associated free energy change per alanine can be utilized to calculate the alanine propagation value. From the Lifson-Roig formulation, the calculated value (wAla = 1.6) is comparable to those obtained for short, solubilized, alanine-rich helices and is much larger than the values obtained by prior host-guest techniques or in N-terminally templated helices and peptides bearing long contiguous strings of alanines with no capping or solubilizing units present.     

Conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster: synthesis of [(CH3)C(NH2)(2)](4)[Re(6)Se(8)(CN)(6)] by a solvothermal route

The compound [(CH(3))C(NH(2))(2)](4)[Re(6)Se(8)(CN)(6)] has been synthesized by the reaction at 200 degrees C for 3 days of Re(4)Te(4)(TeCl(2))(4)Cl(8), KSeCN, and NH(4)Cl in superheated acetonitrile. This compound crystallizes in the space group C2/c of the monoclinic system with four formula units in a cell of dimensions a = 20.3113(14) A, b = 10.1332(7) A, c = 19.9981(14) A, beta = 106.754(1) degrees, V = 3941.3(5) A(3) (T = 153 K). The [Re(6)Se(8)(CN)(6)](4-) anion comprises an Re(6) octahedron face capped by mu(3)-Se atoms, with each Re atom liganded by a CN group. The anions and cations are connected by an extensive network of hydrogen bonds. The conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster appears to be unprecedented.     

A cube in a tetrahedron: microwave-assisted synthesis of an octametallic Fe(III) cluster

The microwave-assisted reaction of Fe(O2CMe)2 with salicylaldoxime (saoH2) in pyridine produces an octametallic cluster in crystalline form in 2 min. The core describes a cube encapsulated in a tetrahedron, while sao2- exhibits a novel coordination mode.     

Cerium(IV)-containing oxomolybdenum cluster with a unique Ce6Mo9O38 core structure

Interaction of [Ce(L(OEt))(2)(NO(3))(2)] (L(OEt)(-) = [Co(eta(5)-C(5)H(5)){P(O)(OEt)(2)}(3)](-)) with (NH(4))(6)[Mo(7)O(24)] in water affords the cerium(iv)-containing oxomolybdenum cluster [H(4)(CeL(OEt))(6)Mo(9)O(38)], which exhibits a unique Ce(6)Mo(9)O(38) core structure.     

Novel concentration-driven structural interconversion in shape-specific solids supported by the octahedral [Re(6)(mu3-Se)8]2+ cluster core

A complex containing the face-capped octahedral [Re(6)(mu(3)-Se)(8)](2+) cluster core, cis-[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](SbF(6))(2) (1), is used as a ditopic ligand with an enforced right angle between the two 4,4'-dipyridyl moieties for the coordination of Cd(2+) ion. Two coordination polymers, [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](2)[Cd(NO(3))(2)]](SbF(6))(4).21C(4)H(10)O.21CH(2)Cl(2) (2) and [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)][Cd(NO(3))(3)]](NO(3)).2C(4)H(10)O.CH(2)Cl(2) (3), are obtained. The relative concentration of Cd(2+) determines which species is isolated, and the conversion of the first structure into the second is demonstrated experimentally.     

New members of a class of iron-thiolate-nitrosyl compounds: trinuclear iron-thiolate-nitrosyl complexes containing Fe(3)S(6) core

The neutral trinuclear iron-thiolate-nitrosyl, [(ON)Fe(mu-S,S-C(6)H(4))](3) (1), and its oxidation product, [(ON)Fe(mu-S,S-C(6)H(4))](3)[PF(6)] (2), were synthesized and characterized by IR, X-ray diffraction, X-ray absorption, electron paramagnetic resonance (EPR), and magnetic measurement. The five-coordinated, square pyramidal geometry around each iron atom in complex 1 remains intact when complex 1 is oxidized to yield complex 2. Magnetic measurements and EPR results show that there is only one unpaired electron in complex 1 (S(total) = 1/2) and no unpaired electron (S(total) = 0) in 2. The detailed geometric comparisons between complexes 1 and 2 provide understanding of the role that the unpaired electron plays in the chemical bonding of this trinuclear complex. Significant shortening of the Fe-Fe, Fe-N, and Fe-S distances around Fe(1) is observed when complex 1 is oxidized to 2. This result implicates that the removal of the unpaired electron does induce the strengthening of the Fe-Fe, Fe-N, and Fe-S bonds in the Fe(1) fragment. A significant shift of the nuNO stretching frequency from 1751 cm(-1) (1) to 1821, 1857 cm(-1) (2) (KBr) also indicates the strengthening of the N-O bonds in complex 2. The EPR, X-ray absorption, magnetic measurements, and molecular orbital calculations lead to the conclusion that the unpaired electron in complex 1 is mainly allocated in the Fe(1) fragment and is best described as {Fe(1)NO}7, so that the unpaired electron is delocalized between Fe and NO via d-pi* orbital interaction; some contributions from [Fe(2)NO] and [Fe(3)NO] as well as the thiolates associated with Fe (1) are also realized. According to MO calculations, the spin density of complex 1 is predominantly located at the Fe atoms with 0.60, -0.15, and 0.25 at Fe(1), Fe(2), and Fe(3), respectively.     

Simultaneous self-assembly of a cage-like silver(I) complex encapsulating an Ag6 neutral cluster core and carbon dioxide fixation

A novel mixed-valent Ag(I)/Ag(0) T(h)-Ag(34) cage was obtained by a one-pot ultrasonic reaction. In the shell of the cage, CO(3)(2-) anion is derived from atmospheric CO(2) and adopts a rare μ(6) bridging mode to link the Ag(I) ions. In the core of the cage, an unprecedented neutral metal cluster with six zero-valent silver atoms is encapsulated.