A divalent germanium complex of calix[5]arene

The reaction of the germylene Ge[N(SiMe(3))(2)](2) with calix[5]arene yields the first example of a group 14 calix[5]arene complex. The crystal structure of this material has been obtained and contains two calix[5]arene macrocycles held together by a Ge(2)O(2) rhombus.     

Synthesis and crystal structure of a germanium(II) calix[6]arene containing unusual diamidosilyl ether groups

The reaction of Ge[N(SiMe₃)₂]₂ with calix[6]arene furnishes a novel macrocyclic product having two divalent germanium atoms incorporated into a Ge₂NO rhombus which contains a μ₂-oxygen atom and a μ₂-NH₂ group. The crystal structure of the product indicates the presence of a conformationally rigid molecule where three of the six oxygen atoms of the calix[6]arene are bound to the germanium atoms while the remaining three have been converted into –OSiMe₃ or unusual –OSi(H)(NH₂)₂ groups. Spectral (¹H, ¹³C, and ²⁹Si NMR) data in solution are consistent with the solid-state structure and indicate the germanium calix[6]arene retains its structure in solution.     

Cucurbit[8]uril-based inclusion compounds containing iron(II), cobalt(III), and nickel(II) complexes with cyclam and cyclen as guest molecules: Synthesis and crystal structures

New inclusion compounds containing iron(II), cobalt(III), and nickel(II) complexes with the cyclic polyamine ligands cyclam and cyclen in the macrocyclic cavitand cucurbit[8]uril (CB[8]) were obtained: {trans-[Fe(Cyclam)(CO)(OCHO)]@CB[8]}Cl · 15H₂O, {cis-[Co(Cyclen)(H₂O)Cl]@CB[8]}Cl₂ · 20H₂O, and {cis-[Ni(Cyclen)(H₂O)Cl]@CB[8]}Cl · 12H₂O. According to X-ray diffraction data, the complexes are in the cavity of each CB[8] molecule. The complexes of the above molecular formulas were isolated in the solid state as supramolecular compounds with CB[8] and structurally characterized for the first time.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Transition metal-directed self-assembly of calix[4]arene based dithiocarbamate ligands

The transition metal-directed self-assembly of dithiocarbamate ligand functionalized upper and lower rim calix[4]arenes affords novel dimeric bimetallic bis(calix[4]arene) species as determined by a combination of analytical methods including X-ray crystallography. An exception is a zinc(II) dithiocarbamate upper rim calix[4]arene assembly which is monomeric in nature. Electrochemical investigations reveal the bimetallic copper(II) bis(calix[4]arene) systems can electrochemically sense dihydrogen phosphate and carboxylate anions via significant cathodic perturbations of the respective copper(II)/(III) dithiocarbamate oxidation wave.     

Main-group-element calix[4]arenes: variable coordination and conformational isomerism at phosphorus and silicon

Treatment of calix[4]arene (1b) with trichloromethylsilane yields two conformers of calix[4]SiMe(OH), the cone 2b-C and the partial cone 2b-PC. These are isolated and structurally characterized, and their thermodynamic activation parameters are determined in solution [Ea = 117(3) kJ/mol, delta H = 5(4) kJ/mol]. Similar parameters are found for the p-tert-butylcalix[4]arene analogues 2a-C and 2a-PC. Deprotonation of 2b with butyllithium yields calix[4]SiMe(OLi) (8b). The structure of 8b is solvent dependent: 8b contains a five-coordinate silicon in THF and a four-coordinate silicon in benzene. Similar behavior is found for the p-tert-butylcalix[4]arene analogues. The five-coordinate phosphorus analogue of the anion in 8, p-tert-butylcalix[4]PMe (11a), is synthesized from the phosphonium triflate salt p-tert-butylcalix[4]PMe(OH)OTf (10a(OTf)) via treatment with butyllithium. The structure of 11a shows the geometry around phosphorus to be very close to a pure trigonal bipyramid. The X-ray structure of 10a(OTf) cannot be obtained, but its iodide analogue 10a(T) is synthesized and structurally characterized. The cation in 10a(I) adopts the partial cone conformation in the solid state, similar to 2b-PC. Treatment of 8b with methyl trifluoromethanesulfonate yields the methyl phenyl ether calix[4]SiMe(OMe) (3b). This species and its p-tert-butyl analogue 3a are structurally characterized. Both adopt the partial cone conformation. The SiMe group in 3b can be removed via treatment with fluoride to yield the monomethylated calix[4]arene 4b in 50-60% overall yield based on 1b.     

Binding and redox properties of iron(II) bonded to an oxo surface modeled by calix[4]arene

The syntheses of the parent compounds [(p-Bu(t)-calix[4]-(O)2(OR)2)Fe-L] [R = Me, L = THF, 5; R = Bu(n), L = THF, 6; R = PhCH2, L = THF, 7; R = SiMe3, L = none, 8] have been performed by reacting the protonated form of the dialkylcalix[4]arene with [Fe2Mes4] [Mes = 2,4,6-Me3C6H2]. All of them undergo one-electron oxidative functionalization. By use of different oxidizing agents, the following iron(III) derivatives have been obtained: [(p-Bu(t)-calix[4]-(O)2(OR)2)Fe-X] [X = Cl, R = Me, 9; X = I, R = Me, 10] and [(p-Bu(t)-calix[4]-(O)2(OR)2)2Fe2(mu-X] [X = O, R = Me, 11; X = O, R = Bu(n), 12; X = S, R = Me, 13], 9 and 10 being particularly appropriate for a further functionalization of the metal. The last three display typical antiferromagnetic behavior [J = -78.6 cm-1, 11; J = -64.1 cm-1, 13]. In the case of 7 and 8, the reaction with O2 led to the dealkylation of one of the alkoxo groups, with the formation of a dimeric iron(III) derivative ([mu-p-Bu(t)-calix[4]-(O)3(OR))2Fe2] [R = PhCH2, 14; R = SiMe3, 15] [J = -9.8 cm-1]. The reaction of the parent compounds with ButNC and diazoalkanes led to the formation of [Fe=C] functionalities supported by a calix[4]arene oxo surface. The following compounds have been isolated and characterized: ([p-Bu(t)-calix[4]-(O)2(OR)2)Fe=CNBut] [R = SiMe3, 16, nu CN = 2175 cm-1], ([p-Bu(t)-calix[4]-(O)2(OR)2)Fe=CPh2] [R = Me, 17; R = PhCH2, 18; R = SiMe3, 19]. The three carbene complexes 17-19 display quite an unusual high-spin state, which is a consequence of the formation of a weak pi interaction between the metal and the carbene carbon, as confirmed by the extended Hückel calculations. The carbene functionality has been removed from the iron center in the reaction with O2 and HCl. The proposed structures have been supported by X-ray analyses of complexes 8, 9, 12, 14, 16, 17, and 19.     

Luminescence behavior of a water soluble calix[4]arene derivative complex with terbium ion(III) in gelation solution

The complexation luminescence behavior of a water soluble calix[4]arene derivative, 5,11,17,23-tetra-sulfonate-25,26,27,28-tetra-carboxymethoxycalix[4]arene (L) with lanthanoid ion (Tb(3+)) has been investigated in gelation solution at 25 degrees C by using UV-vis and fluorescence spectra. The results obtained indicated that the water soluble calix[4]arene derivative can form an efficient energy transfer complex with terbium ion(III). The fluorescence of L x Tb(3+)complex is partially quenched by gelatin in gelation solution. The quenching intensity is related to the concentration and the hydrolysis degree of gelatin. Absorption and fluorescence spectra analysis show that the -COO(-) groups on gelatin have a definite binding ability to Tb(3+), and then, gelatin could compete binding with calix[4]arene derivative upon complexation with Tb(3+), leading to the relative fluorescence quenching of the formation complex of terbium(III) ion with calix[4]arene derivative.     

Molybdocalixarene structure control via rim deprotonation. synthesis, characterization, and crystal structures of calix[4]arene Mo(VI) monooxo complexes and calix[4]arene alkali metal/Mo(VI) dioxo complexes

We report a series of calix[4]arene Mo(VI) dioxo complexes M2RC4MoO2 (M = alkali metal, R = H or Bu(t)) that were fully characterized by NMR, X-ray, IR, UV/vis, and elemental analysis. Molybdocalix[4]arene structures can be controlled via lower rim deprotonation, groups at para positions of calix[4]arene, and alkali metal counterions. Mono deprotonation at the lower rim leads to calix[4]arene Mo(VI) monooxo complexes RC4MoO (R = H, Bu(t), or allyl), and full deprotonation gives rise to calix[4]arene Mo(VI) dioxo complexes. Structural studies indicate that HC4 Mo(VI) dioxo complexes easily form polymeric structures via cation-pi interaction and coordination between different calixarene units. However, Bu(t)C4 Mo(VI) dioxo complexes tend to form dimers or tetramers due to steric hindrance of the tert-butyl groups at para positions in calixarene. The structures of the reduced side products A and C were determined by X-ray diffraction studies. The mechanism of RC4MoO formation from the reaction of calixarene monoanions with MoO2Cl2 appears to include the addition of a calixarene -OH group across a Mo=O bond.     

(硫杂)杯[4]芳烃缩氨基(硫)脲(桥联)衍生物的合成

对叔丁基(硫杂)杯[4]芳烃-1,3-二醛基衍生物4a和4b与苯基氨基硫脲进行“1＋2”缩合反应, 合成了杯[4]芳烃缩氨基硫脲衍生物5a和5b, 产率为84%和85%. 化合物4a和4b与1,6-己基双氨基脲发生“1＋1”缩合反应, 合成了杯[4]芳烃双缩氨基脲桥联衍生物6a和6b, 产率为83%和80%. 新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

A dinuclear cobalt(II) complex of calix[8]arenes exibiting strong magnetic anisotropy

The solvothermal reaction of cobalt(II) acetate with p-tert-butylcalix[8]arene (calix) and triethylamine affords the compound (Et3NH)2 [CoII2(calix)2] (.2Et3NH) that shows a hydrogen bond bridged dinuclear complex [CoII2(calix)2]2- () with cobalt(II) ions in a tetrahedral geometry. The compound crystallises in the monoclinic, space group P2(1)/n with cell parameters a=14.89(1) A, b=20.90(2) A, c=30.87(4) A, beta=102.57(7) degrees, V=9376(16) A3, Z=2. The magnetic studies together with ab initio calculations are evidence of an important role of the geometry of the second coordination sphere of carbon and hydrogen atoms around the CoO4 core in quantifying the zero field splitting on cobalt sites. This results in strong magnetic anisotropies with a negative axial component on the cobalt fragments.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

Sorption of Cu(II) onto silica gel immobilized calix[4]arene derivative with tripodal structure

This study contains the synthesis of silica gel-immobilized calix[4]arene derivative (TR-CL[4]P) as a new sorbent and its sorption studies towards Cu (II) ion in aqueous solution. The aldehyde pointed calix[4]arene derivative 5 was synthesized and then it was immobilized onto 3-aminopropilsilica gel (APS). In batch sorption experiments, the experimental results showed that TR-CL[4]P is effective sorbent towards Cu (II) ion. Therefore, the effect of solution pH, sorption time, temperature and initial metal ion concentration onto Cu (II) sorption was investigated. Maximum Cu(II) removal was obtained at 30?°C, 30?min and pH 6.0 for TR-CL[4]P and the batch sorption capacity was found as 17.8?mg/g. The characteristics of the sorption process for Cu (II) ion were evaluated by using the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms. Also, thermodynamic parameters, i.e., ΔG, ΔS, and ΔH were calculated for the system.     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Reactions of collman complex with tin(IV) and germanium(IV) porphyris,formation of [tin(II) and germanium(II) porphyrins] tetracarbonyliron and crystal structure of [2,3,7,8,12,13,17,18-octaethylporphinato tin(II)] tetracarbonyliron

The action of Na₂Fe(CO)₄ with tin(IV) and germanium(IV) porphyrins affords metal(II) porphyrin complexes [(por)M(II)Fe(CO)₄] (por = porphyrinate, M - Sn(II) or Ge(II)). The molecular structure of [(oep)Sn(II)Fe(CO)₄] was solved by X-ray diffraction techniques. The molecular structure of [(oep)Sn(II)Fe(CO)₄] was solved by X-ray diffraction techniques : the Sn coordination is square pyramidal with the iron in axial position (Sn-Fe = 2.492(1)Å) whereas the Fe coordination is trigonal bipyramidal. Mössbauer parameters provide convincing evidence for the formal zero oxidation state of the iron atom.     

Synthesis and study of binuclear calix[4]arene Schiff base Co(II) complexes as catalyst in the presence of PhIO for the catalytic oxidation of olefin

The binuclear Co(II) complexes of calix[4]arene substituted 2-vanillin (R₁) and 2-hydroxy naphthaldimine (R₂), Schiff bases (Co₂L¹ and Co₂L²) have been synthesized, characterized and employed as models to mimic monooxygenase in the catalytical oxidation of olefins. The kinetic mathematical model (oxygen rebound mechanism) for olefin cleavage catalyzed by the complexes has been proposed. The results show that, compared to the calix[4]arene-free analogous, the mono and multinuclear complexes of calix[4]arene Schiff bases as catalyst exhibit high activity in the olefin catalytic oxidation.     

On the unprecedented level of dinitrogen activation in the calix[4]arene complex of Nb(III)

The calix[4]arene niobium(III) complex ([L]Nb-N=N-Nb[L] where [L] = p-tert-butylcalix[4]arene), reported to bind N(2) in a μ(2)-linear dimeric capacity and to activate the N(2) triple bond to 1.39 ?, corresponding to the longest N(2) bond known in the end-on coordination mode, was subjected to a computational investigation involving both density functional and wavefunction based methods to establish the basis for the unprecedented level of activation. Replacement of the calix[4]arene ligand with hydroxide or methoxide ligands reveals that the organic backbone structure of the calix[4]arene ligand exerts negligible electronic influence over the metal centre, serving only to geometrically constrain the coordinating phenoxide groups. A fragment bonding analysis shows that metal-to-dinitrogen π* backbonding is the principal Nb-N interaction, providing a strong electronic basis for analogy with other well-characterised three- and four-coordinate complexes which bind N(2) end-on. While the calculated structure of the metallacalix[4]arene unit is reproduced with high accuracy, as is also the Nb-Nb separation, the calculated equilibrium geometry of the complex under a variety of conditions consistently indicates against a 1.39 ? activation of the N(2) bond. Instead, the calculated N-N distances fall within the range 1.26-1.30 ?, a result concordant with closely related three- and four-coordinate μ(2)-N(2) complexes as well as predictions derived from trends in N-N stretching frequency for a number of crystallographically characterized linear N(2) activators. A number of potential causes for this bond length discrepancy are explored.     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.     

Synthesis and crystal structure of p-acylated calix[4]arene ethers

C-acylation of calix[n]arenes is an important reaction which has been primarily utilized for their further functionalization to provide conformers with varying shapes, cavity dimensions and molecular receptor characteristics that can bind ionic and neutral species in a selective and specific manner. The length of the alkyl chain at the upper or the lower rim of calixarenes can be adjusted as required to give derivatives which can span the channels and membranes and majorly influence transport phenomenon. As a part of our program to obtain calixarene based derivatives that can span and scan artificial membranes, C-acylation of calix[4]arene has been examined to yield peracylated and partially acylated calixarene ethers. 5,11,17,23-Tetraacetyl-25,26,27,28-tetramethoxycalix[4]arene has been obtained in 80 % yield by treatment of tetramethoxycalix[4]arene with acetyl chloride in the presence of aluminum chloride using dichloromethane as the solvent. The structure was established by the conversion to corresponding phenyl hydrazones and oximes. The tetraacetyltetramethoxycalix[4]arene 2a crystallized in a monoclinic lattice, space group P2₁/C with a = 10.320(2) Å, b = 18.928(4) Å, c = 18.421(4) Å, β = 95.44(3)^o, Z = 4. The corresponding methyl substituted O7 directs inwards towards the cavities of calix[4]arene to give an inward flattened partial cone conformation. Molecular packing shows the presence of intermolecular C–H···O, H-bonding interactions between methyl and methylene hydrogens and oxygens of the acetyl groups.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may