Dielectric Study of Homogeneity in Some Binary Liquids in Their Supercooled State

In this work, we report a dielectric study of some binary mixtures in their supercooled region over a frequency range of 10⁶ to 10^–3 Hz. Differential scanning calorimetry measurements have been made above 100K. The samples studied here are DL-lactic acid (88% in aqueous solution), binary mixtures of dimethyl sulfoxide and acetic acid, of propylene glycol and cyclohexanol, and of 4-methyl-3-heptanol and tritolyl phosphate. The frequency dispersion of the relaxation spectra and the temperature dependence of the relaxation process have been critically examined for heterogeneity. The mixtures of dimethyl sulfoxide and acetic acid reveal a 1:1 complex formation. Some evidence of heterogeneity was found only in mixtures of 4-methyl-3-heptanol and tritolyl phosphate. For comparison, we have also studied liquid mixtures of isopropylbenzene with small quantities of acetone or fluorobenzene. These mixtures showed no signs of heterogeneity, although the relaxation spectra are broader than the spectrum of pure isopropylbenzene.     

Solubility of Solid Pentane, 2-Methylbutane, and Cyclopentane in Liquid Argon at 87.3 K

The solubilities of solid pentane, 2-methylbutane (isopentane), and cyclopentane in liquid argon at 87.3 K have been measured by the filtration method. The C₅ hydrocarbon content in solution was determined using gas chromatography. The solubilities of the C₅ hydrocarbons in liquid argon at 87.3K vary from 0.61 × 10^–7 mole fraction for cyclopentane, to 1.37 × 10^–7 mole fraction for pentane, and 8.83 × 10^–6 mole fraction for 2-methylbutane. The Preston–Prausnitz method was used for calculation of the solubilities of solid C₅ hydrocarbons in liquid argon in the temperature range 84–110 K and in liquid nitrogen in the range 64–90K. The values of the solvent–solute interaction constant l ₁₂ were also calculated.     

Voltammetric determination of 2-nitrophenol at a bentonite-modified carbon paste electrode

A bentonite-modified carbon paste electrode has been applied to the determination of 2-nitrophenol by differential pulse voltammmetry. The electrochemical reduction of 2-nitrophenol at –0.8 V is carried out in an artificial sea water-formic acid/sodium formate medium at pH 4. The peak height was found to be dependent on the pH over the range 2–11; the presence of a secondary process was observed in the pH range 8–11. The peak potential showed a dependence on pH, with two linear regions with different slopes. A linear relationship between peak intensity and concentration was obtained in the range 0.07–10 mgl^–1, with a detection limit of 0.03 mg 1^–1 and a coefficient of variation of 1.3% at 5 mg 1^–1. The effects of organic and inorganic species on the 2-nitrophenol determination were studied with a view to testing the resolution of the voltammetric technique. The proposed method has been applied to sea water samples with good results.     

Rapid determination of telmisartan in pharmaceuticals and serum by the parallel catalytic hydrogen wave method

The polarographic characteristics of telmisartan have been investigated in 0.8 mol L^–1 NH₃.H₂O–NH₄Cl (pH 8.9)–0.01 mol L^–1 H₂O₂ as supporting electrolyte. The results demonstrate that the polarographic reduction wave at ca. –1.30 V in the absence of H₂O₂ is a catalytic hydrogen wave, and the reduction wave enhanced by H₂O₂ is a so-called parallel catalytic hydrogen wave. The analytical sensitivity of the parallel catalytic hydrogen wave is ca. 60 times higher than that of the corresponding catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave a novel method has been developed for determination of telmisartan by linear sweep polarography. The calibration curve is linear in the range 2.0×10^–8–2.0×10^–6 mol L^–1 and the detection limit is 1.0×10^–8 mol L^–1. The precision is excellent with relative standard deviations of 2.6% at a concentration of 1.0×10^–7 mol L^–1 telmisartan. The proposed method has been applied to the direct determination of the telmisartan in capsule forms and biological samples. The proposed method has been proved to be advantageous over existing CZE and MEKC methods in simplicity, rapidity, and reproducibility.     

Heterocalixarenes. Part 2. Calix[m]uracil[n]benzimidazol-2(1H)-one[3] arenes: Synthesis and Binding Characteristics

The reactions of uracil/benzimidazol-2(1H)-one with 1,3-bis(bromomethyl)benzene provide respectively1 3-bis[(3-bromomethylbenzene)methyl]uracil/benzimidazol-2(1H)-onewhich on subsequent cyclization with1,3-bis[(uracil-1-yl/benzimidazol-2(1H)-one-1-yl)methyl]benzenederivatives provide respectively calix[m]uracil[n]benzimidazoI-2(1H)-one[3]arenes[m =3, n = 0 (9); m = 2, n = 1 (10);m = 1, n = 2 (11) and m = 0, n = 3 (12)]. The heterocalixarenes 9–12, both in liquid–liquid and solid–liquid extraction experiments, selectively extract ammonium picrates over the similarly sized K⁺ picrate. The selectivity is much more pronounced in the case of solid-liquid extractions. Both in L-L and S-L extractions, 10 exhibits the highest order oft-BuNH₃ ⁺/K⁺ selectivity.     

Isothermal vapor–liquid equilibrium at 333.15 K and excess molar volumes at 298.15 K for the ternary system di-isopropyl ether + n-propyl alcohol + toluene and its binary subsystems

Isothermal vapor–liquid equilibrium data at 333.15 K are reported for the ternary system di-isopropyl ether (DIPE) + n-propyl alcohol + toluene and the binary subsystems DIPE + n-propyl alcohol, DIPE + toluene and n-propyl alcohol + toluene by using headspace gas chromatography. The excess molar volumes at 298.15 K for the same binary and ternary systems were also determined by directly measured densities. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and the excess molar volumes were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Solubility of 1-Pentene Ice in Liquid Nitrogen and Argon at the Standard Boiling Points of the Solvents

The solubilities of 1-pentene ice in liquid nitrogen at a temperature of 77.4 K and in liquid argon at 87.3 K have been measured by the filtration method. The 1-pentene content in solution was determined using gas chromatography. The experimental value of the mole fraction solubility of 1-pentene ice in liquid nitrogen at 77.4 K is: (1.28±0.25)×10^–7 and (4.11±0.44)×10^–7 in liquid argon at 87.3 K. The Preston–Prausnitz method was used for calculation of the solubilities of 1-pentene ice in liquid nitrogen in the temperature range 64.0–90.0 K and in liquid argon in the temperature range 84.0–90.0 K. The parameters l ₁₂ were also calculated. At 90.0 K liquid argon is the better solvent for 1-pentene ice than is liquid nitrogen.     

Transport study of V(V), Zn(II) and Be(II) using supported liquid membranes

V(V), Zn(II) and Be(II) have been studied to test oxine and tri-n-butylphosphate (TBP) as carriers for transport through supported liquid membranes in polypropylene film. All the three types of ions can be passed through such membranes using oxine in case of V(V) and TBP in case of Zn(II) and Be(II). Maximum flux of metal ions has been observed from 0.01M H₂SO₄ for V(V) (3.22·10^–6 mol·m^–2·s^–1) and 2M HCl containing 3M CaCl₂ for Zn(II) solution (1.4·10^–6 mol·m^–2·s^–1). Low flux was observed in case of Be(II) since the membrane was affected by sulphocyanide group and did not remain hydrophobic. Mechanism of transport for these metal ions have been proposed separately. Distribution coefficient data for V(V) have also been evaluated to determine theoretical values of the permeability coefficient, and compared with experimental values.     

The behaviour of plutonium in aqueous basic media

Behaviour of Pu(IV) and Pu(VI) in basic media has been investigated by studying their stabilities and quantitative determination by spectrophotometry. Beer's law was found to be obeyed in the range of 1·10^–3 to 5·10^–3 M Pu(IV) at 485 nm peak with a molar absorption coefficient of 95M^–1· cm^–1 in sodium carbonate medium. In case of Pu(VI), in the same medium Beer's law was obeyed in the concentration range of 2·10^–3 to 1·10^–2M at 550 nm with a molar absorption coefficient of 50M^–1·cm^–1. Distribution ratios of Pu(IV) and Pu(VI) for their sorption on Al₂O₃ and Amberlyst A-26 (MP) resin from bicarbonate and carbonate media have been determined. High distribution ratios obtained indicate the feasibility of decreasing the plutonium content of basic carbonate streams in reprocessing. 10% breakthrough capacities for Pu(IV) and Pu(VI) with these exchangers during column operations have also been determined.     

By-product formation in spark breakdown of SF6/O2 mixtures

The yields of SOF₄, SO₂F₂, SOF₂, and SO₂ have been measured as a function of O₂ content in SF₆/O₂ mixtures, following spark discharges. All experiments were made at a spark energy of 8.7 J/spark, a total pressure of 133 kPa, and for O₂ additions of 0, 1, 2, 5, 10, and 20% to SF₆. Even for the case of no added O₂, trace amounts of O₂ and H₂O result in the formation of the above by-products. However, addition of O₂ significantly increases the yields of SOF₄ and SO₂F₂, while SOF₂ is only slightly affected. The net yields for SOF₄ and SO₂F₂ formation range from 0.18×10^–9 and 0.64×10^–10 mol·J^–1, respectively, at 1% O₂ content to 10.45×10^–9 and 7.15×10^–10 mol·J^–1, respectively, at 20% O₂ content. The mechanism for SOF₄ production appears to involve SF₄, an important initial product of SF₆, as a precursor. Comparison of the SOF₄ and SO₂F₂ yield from spark discharges (arc and corona) shows that the yields from other discharges (arc and corona) shows that the yields can vary by at least three orders of magnitude, depending on the type of discharge and on other discharge parameters.     

Vibrational Spectra, Assignment, Conformational Stability and Ab Initio/DFT Calculations for 1-Nitropropane

The infrared spectra (4000–400 cm^{– 1}) of solid and the Raman spectra (3500–30 cm^{– 1}) of liquid and solid 1-nitropropane, CH₃CH₂CH₂NO₂, have been registered. Both the trans and gauche conformers have been identified in the fluid phase, while the trans form remains in the stable solid. Temperature dependence (190–230K) of the liquid 1-nitropropane Raman spectra has been carried out. From these data, the enthalpy difference was determined to be 870 ± 105 J-mol^–1, with the gauche conformer being the more stable rotamer. Ab initio and DFT calculations at different levels of approximation (HF, MP2, B3LYP, B3PW91) gave optimized geometries, harmonic force fields, and vibrational frequencies for the trans and gauche conformers. All the calculations (except the B3PW91/6-31G* level) predicted gauche as the low-energy conformer. Theoretical force constants are analyzed for formulating constraints in the molecular force field model of 1-nitropropane.     

Synthesis and properties of disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S2BINPH) and spectrophotometric determination of trace amounts of nickel with S2BINPH

Disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S₂BINPH) has been synthesized and its reactivity with metal ions investigated. A sensitive and selective spectrophotometric method for the determination of nickel with this reagent has been developed. S₂BINPH reacts with nickel(II) to form a stable 12 (metal ligand) complex with an absorption maximum at 501 nm. The complex formation is quantitative in the pH range 7.2–8.5. Beer's law is obeyed over the range 60–700 ng ml^–1 of nickel and the apparent molar absorptivity of the complex is 8.86 × 10⁴ mol^–1 1 cm^–1 at 501 nm. The proposed method was applied to the determination of nickel in a standard iron- and -steel sample with satisfactory results. Furthermore, proton dissociation constants of S₂BINPH and the overall formation constant of its nickel complex were also determined spectrophotometrically.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

A novel amperometric sensor and chromatographic detector for determination of parathion

A novel amperometric sensor and chromatographic detector for determination of parathion has been fabricated from a multi-wall carbon nano-tube (MWCNT)/Nafion film-modified glassy-carbon electrode (GCE). The electrochemical response to parathion at the MWCNT/Nafion film electrode was investigated by cyclic voltammetry and linear sweep voltammetry. The redox current of parathion at the MWCNT/Nafion film electrode was significantly higher than that at the bare GCE, the MWCNT-modified GCE, and the Nafion-modified GCE. The results indicated that the MWCNT/Nafion film had an efficient electrocatalytic effect on the electrochemical response to parathion. The peak current was proportional to the concentration of parathion in the range 5.0×10^–9–2.0×10^–5 mol L^–1. The detection limit was 1.0×10^–9 mol L^–1 (after 120 s accumulation). In high-performance liquid chromatography with electrochemical detection (HPLC–ED) a stable and sensitive current response was obtained for parathion at the MWCNT/Nafion film electrode. The linear range for parathion was over four orders of magnitude and the detection limit was 6.0×10^–9 mol L^–1. Application of the method for determination of parathion in rice was satisfactory.     

Kinetics of the solvolysis of chloropentacyanocobaltate(III) ions in water + 2-propanol mixtures

Rates of solvolysis of [Co(CN) ₅ Cl] ^3– have been determined in a range of water-rich water + 2-propanol mixtures over a range of temperatures and they show no simple correlation with dielectric constant. The variation of the enthalpy and entropy of activation with solvent composition show broad extrema and these are discussed in relation to the physical properties of the media. The application of a free energy cycle to the dissociative loss of the chloride ion in the transition state shows that the effect of changes in solvent structure as the alcohol content increases is to stabilize the emergent pentacyanocobaltate(III) ion Co(CN) ₅ ^2– relative to the chloropentacyanocobaltate(III) anion in the initial state.     

Spectro photometric determination of cobalt(ii) with 2,2'-dipyridyl-2-pyridylhydrazone

A spectrophotometric study of the cobalt(II) complex of a new reagent, 2,2'-dipyridyl-2-pyridylhydrazone (DPPH) is presented. A water-soluble yellow-orange complex is formed in the pH range 3–11, and shows maximal absorbance at 480 nm with a molar absorptivity of 3.2·10⁴ l mol^-1 cm^-1 ; Beer's law is obeyed over the range 0.25–3.75 p.p.m. of cobalt. This complex is very stable and on addition of perchloric acid only a bathochromic shift takes place from 480 nm to 500 nm. This complex is stable even in the presence of 20% perchloric acid and shows a molar absorptivity of 4.2 ·10⁴ l mol^-1 cm^-1 ; Beer's law is obeyed over the range 0.15–2.00 p.p.m. of cobalt. A new method of determining trace amounts of cobalt is proposed, which possesses the advantages of high sensitivity and very high selectivity.     

High-performance liquid chromatographic analysis of the mycotoxin citrinin and its application to biological fluids

Critinin is a toxic metabolite produced by several species of Penicillium and Aspergillus. Citrinin is nephrotoxic and has been implicated in disease outbreaks in animals and humans. Citrinin was resolved as a sharp peak by reversed-phase high-performance liquid chormatography on a small-particle 10μm) column by elution in 4.25 min with a phosphoric acid (0.25 nN)-acetonitrile-2-propanol solvent (55:35:10). Detection was by ultraviolet absorbance at 340 nm. The relationship between peak height and area and quantity injected was linear over a range of 2–50 ng at 340 mn and 5–200 ng at 365 nm. Retention time and peak area were highly reproducible. As little as 2–5 ng citrinin was detectable. Complete recovery of citrinin from plasma samples containing known quantities of [¹⁴C]citrinin was obtained over a range of 5–40 μg/ml by treatment of the plasma with 1 N hydrochloric acid followed by extraction with ethyl acetate. The method provides for the direct analysis of citrinin in urine and bile without prior extraction.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

Dielectric Relaxation Study of Liquids Having Chloro Group with Associated Liquids. I. Chlorobenzene with Methanol, Ethanol, and 1-Propanol

The complex permittivity for chlorobenzene–alcohol binary mixtures have been determined over the frequency range of 10 MHz to 20 GHz, at 15, 25, 35, and 45°C, using the time-domain reflectometry (TDR) method for 11 concentrations of each chlorobenzene–alcohol system. The alcohols used were methanol, ethanol, and 1-propanol. The values of static dielectric constant, relaxation time, the corresponding excess properties, the Redlich–Kister coefficients up to the third order, the Kirkwood correlation factor, and thermodynamic parameters of the mixtures have been determined. The excess permittivity is found to be negative for chlorobenzene–methanol and chlorobenzene–ethanol, whereas it is positive in the 1-propanol rich region. The excess inverse relaxation time is negative for all the systems studied here. The Kirkwood effective correlation factor increases with an increasing in the molecular size of the alcohol, but decreases with increasing temperature.     

A study of the spectrophotometric determination of traces of cadmium(II) and copper(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the presence of polyglycol octylphenyl ether

A spectrophotometric study of the Cd(II) and Cu(II) complex of a new reagent, 2-(5-bromo-2-pyridylazo)-5-diethylamino phenol (5-Br-PADAP) in the presence of polyglycol octylphenyl ether (OP) is presented. A reddish binary complex is formed at pH 9 and shows maximal absorbance at 560 nm with molar absorptivity of 1.16 × 10⁵ · mol⁻¹ · cm⁻¹ liter (Cd), 1.5 × 10⁵ mol⁻¹ · cm⁻¹ · liter (Cu). Beer's law is followed over the range 0.0 to 20 μg cadmium(II) and 0.0–18 μg copper(II). The continuous variation method and molar ratio method showed that the metal ligand ratio is 1:2; ordinarily, most ions do not interfere with the determination and the method can be applied for direct spectrophotometric determination of cadmium(II) and copper(II) in actual samples and the results obtained are satisfactory.