Studies on some radical transfer reactions by entrapping the radicals as polymer end groups. I. Reaction of hydroxyl radicals with amines

The reaction of OH radicals with a number of amines has been studied by entrapping the resultant radicals as polymer end groups which have been detected and estimated by the sensitive dye partition technique. Expressions have been developed relating the average amounts of end groups per polymer molecule to the rate constant of the radical transfer reaction, the rate constants determined for reaction with n-butyl, n-hexyl, and n-octyl amine being 1.00 × 10¹⁰, 1.31 × 10¹⁰, and 1.46 × 10¹⁰ mol^?1 L s^?1, respectively, at 25°C. The order of reactivity for amines of different classes has been found to be as primary < secondary > tertiary, the rate constants for reaction with n-butyl, dibutyl, and tributyl amine being 1.00 × 10¹⁰, 1.81 × 10¹⁰, and 1.67 × 10¹⁰ mol^?1 L s^?1, respectively, at 25°C. The change in the reactivity of the amine with chain length and amine class has been explained by activation and deactivation of the CH₂ group from which H abstraction by OH radicals occurs, respectively, by the alkyl group and by the protonated amino nitrogen under the acidic condition of the medium. Between pH 1.00 and 2.17, the rate of the reaction with n-butyl amine remains practically unchanged, but from pH 2.20 to 2.72 the rate constant increases with increasing pH, indicating that deprotonation of the positively charged nitrogen starts at about pH 2.20. The method is simple and accurate and can be applied to detect and estimate very reactive radicals.     

Synthesis of functionalized amine oligomers by free‐radical telomerization of methyl methacrylate with a peculiar telogen: 2‐Aminoethanethiol hydrochloride

The Telomerization of methyl methacrylate with 2‐aminoethanethiol hydrochloride initiated by 2,2′‐azobisisobutyronitrile, was investigated in dimethylformamide (DMF). First, the peculiar behavior of 2‐aminoethanethiol was highlighted because it behaves as a peculiar transfer agent; this is because its transfer constant (C_T) is weak compared with that of other thiols. The presence of the amine function greatly disturbs the free radical telomerization reaction. Telomerization was performed in the presence of hydrochloric acid (HCl) to protect the amine group. The transfer constant was strongly influenced by the acid and water concentration. This work emphasized that the nature of the solvent plays an important role in the determination of the transfer constant. Thus, the value of C_T increased from 0.23 in DMF to 0.56 in the HCl/DMF mixture. The primary and secondary amines were recovered after the reaction. The functionality of the primary and secondary amines was measured by titration. The influence of the concentration of HCl on the resulting amine functionality was investigated. The acid presence prevents the formation of secondary amines, arising from Michael's reaction, on methyl methacrylate. Finally, these results were applied to the synthesis of amine‐functionalized telomers with molecular masses of 2000 to 15,000 g/mol. The amine function was correlated with the decrease of R₀ ([telogen]/[monomer]). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5146–5160, 2004     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Doubly charged ion mass spectra: VI—Amines

Doubly charged ion mass spectra of 22 amines (2–10 carbon atoms) were determined using an Hitachi RMU-7L double focusing mass spectrometer. Molecular ions were not observed in the spectra of aliphatic amines. The most intense product ion peaks in the spectra of lower molecular weight amines resulted from hydrogen elimination from the molecular ion; however, as amine molecular weight increased the largest peaks resulted from both hydrogen and heavy atom elimination from the molecular ion. Dominant ions in the doubly charged ion spectra of lower molecular weight aliphatic amines were from reactions of [C_nH₃N]²⁺ (n:=2, 3, 4) type ions. The spectra of higher molecular weight aliphatic amines spanned a wide mass range. Appearance energies for some of the more prominent ions were measured in the range from 25 to 49 eV. A geometry optimized quantum mechanical self-consistent field molecular orbital treatment was used to compute the energies and structural parameters of prominent ions in the doubly charged ion mass spectra.     

Polymers of tertiary amines

Polymers of tertiary amines and their hydrochlorides of molecular weights in the range 300–2000 have been prepared, starting from trans-1,4-dichlorobutene-2, and primary amines. The polymers present interesting solubility properties. Variation of the reaction conditions leads to crosslinked insoluble polymers. Reaction of the soluble tertiary amine polymers with organic acid dichlorides leads to polymers of tertiary amine–amides, a new type of polymer.     

Photostabilizing activity of tertiary hindered amines

The influence of the N-alkyl group of tertiary hindered amines on the photostabilization of polymers was studied. The photostabilizing effects of the tertiary amine derivatives of 4-benzoyloxy-2,2,6,6-tetramethylpiperidine ( 1a ) in polypropylene were compared. All tertiary amine derivatives having α-H to hindered N showed higher effectiveness than 1a . Model liquid phase photoxidations were carried out by irradiating (UV-lamp) the solutions of tertiary hindered amines containing tert-butyl hydroperoxide as a photoinitiator. The tertiary hindered amines were oxidized more easily than corresponding parent hindered amine and converted to the parent amine, which was identified as its salt, resulting from the carboxylic acid produced from the N-alkyl group by oxidation. The thermal reaction of the tertiary hindered amines with tert-butyl hydroperoxide was also studied in the liquid phase. The tertiary hindered amines decomposed tert-butyl hydroperoxide more rapidly than the parent secondary hindered amine, and generated the parent amine. It was also found that the photostabilizing effects of tertiary hindered amines for polyolefins were higher than that of the parent secondary hindered amine.     

Synthesis of poly(Nε-phenoxycarbonyl-l-lysine) by polycondensation of activated urethane derivative and its application for selective modification of side chain with amines

We report a methodology for the synthesis of Nε-phenoxycarbonyl-protected poly(l -lysine) on the side chain by chain growth polycondensation of Nα,Nε-bis(phenoxycarbonyl)-l -lysine proceeded through the selective elimination of phenol and CO₂ from the Nα phenoxycarbonyl moiety at 50 °C in N,N-dimethylacetamide in the presence of a primary amine used as an initiator. After optimization of reaction condition, the addition of acetic acid during polycondensation proved effective for the realization of the predicted molecular weight and narrow dispersity of the corresponding polypeptide by adjusting the feed ratio of monomer to the amine initiator because of the suppression of interchain coupling that occurs between the amino terminus of poly(l -lysine) and the Nε-phenoxycarbonyl group on the polymer side chains. Furthermore, taking advantage of the potentially reactive Nε-phenoxycarbonyl moiety on the side chain, post-polymerization modification was effectively achieved by the nucleophilic reaction of amine compounds including primary, secondary, and aromatic amines through the formation of urea linkage, providing a useful platform for synthesis of selective side chain functionalization of poly(l -lysine) samples. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2522–2530     

Trans ligand influence in cobalt(III) Schiff base complexes: Electronic and steric effects on the kinetics of hydrolysis

Rate constants for the hydrolysis (k_h) of six different amines in trans‐[Co((BA)₂en)(amine)₂]ClO₄ complexes (amine = aniline 1a , para‐toluidine 1b , benzylamine 1c (primary amines), pyrrolidine 2a , piperidine 2b , morpholine 2c (secondary amines), and (BA)₂en = Bisbenzoylacetoneethylenediiminato) in mixed methanol/water (1:1) solvent have been determined between 30 and 55°C. The hydrolysis product of 2c , trans‐[Co((BA)₂en)(morpholine)(H₂O)]ClO₄, has been separately prepared and characterized by UV–vis and ¹H NMR spectroscopy. Depending on the nature of the axial amine ligand the limiting first‐order rate constants for the amine hydrolysis at 40°C range from (3.42 ± 0.10) × 10^?5 to (5.32 ± 0.13) × 10^?5 s^?1. At the first glance, a reasonable trend cannot be established between k_h and the basicity or the inductive trans effect of the amine ligands. However, when the complexes are classified into two groups, based on the type of the amine (primary and secondary), the values of k_h correlate well with the basicity or inductive effect of the amine in each group. The observed trend in k_h values for the complexes with primary amines is 1a (5.32 ± 0.13) × 10^?5 s^?1 > 1b (3.51 ± 0.14) × 10^?5 > 1c (1.72 ± 0.03) × 10^?5 (40°C), which is opposite to the amine basicity strength. In the case of the complexes with secondary amines, the observed trend in k_h values is in accord with amine basicity (or inductive trans effect), i.e. 2a (5.02 ± 0.22) × 10^?5 > 2b (4.18 ± 0.10) × 10^?5 > 2c (3.42 ± 0.10) × 10^?5 s^?1 (40°C). © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 387–393, 2002     

Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. II. Polymerization of acrylonitrile by ceric ion in presence of various substituted amines

The effect of various substituted amines on the polymerization of acrylonitrile initiated by ceric ammonium sulfate has been studied in aqueous solution at 30°C. It was found that the secondary and tertiary amines considerably increased the rate of polymerization, whereas the primary amines seemed to have no effect at all. From the kinetic studies it was found that the overall polymerization rate R_p is independent of ceric ion concentration and can be expressed by the equation: R_p = k₁ [amine] [monomer] + k₂[monomer]², where k₁ and k₂ are constants (involving different rate constants). The accelerating effect of the amines was attributed to a redox reaction between the ceric ion and the amine involving a single electron transfer, the relative activity of the different amines being thus dependent on the relative electron-donating tendency of the substituents present in the amine. The mechanism of the polymerization is discussed on the basis of these results, and various kinetic constants are evaluated.     

Basicity of some aliphatic amines in mixed H2O?CH3CN solvents

The values of pK_a^ms (K_a^ms represents ionization constant of conjugate acid of amine base in mixed water–acetonitrile solvent) for all amines, except for charged amine bases, show a mild decrease (ca. 0.1–0.4 pK units) with the increase in CH₃CN content from 2 to ∼60% v/v. However, the pK_a^ms values at 70% v/v CH₃CN become nearly equal or slightly larger (by ≤0.7 pK units) than the corresponding pK_a^ms at 2% v/v CH₃CN for all neutral and charged amines. The values of pK_a^ms for phenol increase from 10.17 to 13.38 with the increase in the content of CH₃CN from 2 to 70% v/v in mixed aqueous solvent. Taft reaction constants, ρ*, obtained from the plots of pK_a^ms against ∑σ* for primary and secondary amines decrease by ca. 0.8 ρ* units with the increase in the CH₃CN content from 2 to 70% v/v. The values of pK_a^ms show an empirical linear relationship with the corresponding values of pK_a^w (where pK_a^w represents the pK_a obtained in aqueous solvent containing 2% v/v CH₃CN), which allows the estimation of a pK_a in mixed H₂O CH₃CN solvents from that in water. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 146–152, 2000     

Vinyl Polymerization 204. Initiation Mechanism of the Radical Polymerization of Vinyl Monomers by p-Methoxy -p'-nitrobenzoyl Peroxide and Tertiary Amines

Abstract

A study of the reaction of tertiary amines with p-methoxy-p'-nitrobenzoyl peroxide in the presence of styrene was made in benzene. Anisic acid and p-nitrobenzoic acid were obtained from the reaction product. Using gas chromatography, the molar ratio of the amount of the above two acids was measured and classified into three types, according to the kind of amine used. From the results the reaction mechanism was discussed, and it was concluded that the oxygen which stands adjacent to the p-methoxybenzoyl group may be charged more positively and may be the more predominantly attacked by tertiary amine.     

CB‐TE2A+·Cl−·3H2O: a short intermolecular hydrogen bond between zwitterionic bicyclo[6.6.2]tetraamine macrocycles

1,4,8,11‐Tetraazabicyclo[6.6.2]hexadecane‐4,11‐diacetic acid (CB‐TE2A) is of much interest in nuclear medicine for its ability to form copper complexes that are kinetically inert, which is beneficial in vivo to minimize the loss of radioactive copper. The structural chemistry of the hydrated HCl salt of CB‐TE2A, namely 11‐carboxymethyl‐1,8‐tetraaza‐4,11‐diazoniabicyclo[6.6.2]hexadecane‐4‐acetate chloride trihydrate, C₁₆H₃₁N₄O₄⁺·Cl⁻·3H₂O, is described. The compound crystallized as a positively charged zwitterion with a chloride counter‐ion. Two of the amine groups in the macrocyclic ring are protonated. Formally, a single negative charge is shared between two of the carboxylic acid groups, while one chloride ion balances the charge. Two intramolecular hydrogen bonds are observed between adjacent pairs of N atoms of the macrocycle. Two intramolecular hydrogen bonds are also observed between the protonated amine groups and the pendant carboxylate groups. A short intermolecular hydrogen bond is observed between two partially negatively charged O atoms on adjacent macrocycles. The result is a one‐dimensional polymeric zigzag chain that propagates parallel to the crystallographic a direction. A second intermolecular interaction is a hydrogen‐bonding network in the crystallographic b direction. The carbonyl group of one macrocycle is connected through the three water molecules of hydration to the carbonyl group of another macrocycle.     

The Sonogashira Coupling of Polymer‐Supported Propargylamine with Aryl Iodides

The Sonogashira coupling reaction of polymer‐supported propargylamine (=prop‐2‐yn‐1‐amine) with aryl iodides in the presence of the [Pd(PPh₃)₂]Cl₂/CuI catalyst system produces 3‐arylprop‐1‐yn‐1‐amines smoothly at room temperature (Scheme). When propargylamine is attached on Wang resin through a carbamate linker, the common problems with amino functionality in palladium‐catalyzed couplings are overcome. The arylpropynamines are cleaved from the polymer with CF₃COOH and converted into chromatographically easily separable acetamides. Our solid‐phase method opens a new pathway toward precursors of pharmacologically interesting arylpropynamines and arylpropanamines.     

Analysis of the Molecular Weight Distributions of Aminolyzed Poly(Ethylene Terephthalate) by Using Gel Permeation Chromatography

The molecular weight distributions of poly(ethylene terephthalate) fibers aminolyzed with selected primary amines (namely, methylamine, ethylamine, n-butylamine, and ethanolamine) were determined by using gel permeation chromatography. Initially the shape of the differential molecular weight distribution (DMWD) curve did not change although its peak shifted to lower molecular weights. As aminolysis continued, a shoulder appeared on the DMWD curve. Its appearance seemed to coincide with an increase in the density of the product. Ultimately, distinct molecular populations could be identified in the treated polymer depending on the severity of the aminolysis and the selectivity of the particular amine. The lowest is thought to represent primarily crystalline residues and has a peak molecular weight of 3400. The relations between M _n and ultimate tenacity and breaking strain for the aminolyzed products were linear.     

Kinetics of the reaction of carbon dioxide with blends of amines in aqueous media using the stopped‐flow technique

The effect of mixing 2‐amino‐2‐methyl‐1‐propanol (AMP) with a primary amine, monoethanolamine (MEA), and a secondary amine, diethanolamine (DEA), on the kinetics of the reaction with carbon dioxide in aqueous media has been studied at 298, 303, 308, and 313 K over a range of blend composition and concentration. The direct stopped‐flow conductimetric method has been used to measure the kinetics of these reactions. The proposed model representing the reaction of CO₂ with either of the blends studied is found to be satisfactory in determining the kinetics of the involved reactions. This model is based on the zwitterion mechanism for all the amines involved (AMP, MEA, and DEA). Blending AMP with either of the amines results in observed pseudo‐first‐order reaction rate constant values (k_o) that are greater than the sum of the k_o values of the respective pure amines. This is due to the role played by one amine in the deprotonation of the zwitterion of the other amine. Steric factor and basicity of the formed zwitterion and the deprotonating species have a great bearing in determining the rate of the reactions studied. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 391–405, 2005     

Solvent- and catalyst-free N-formylations of amines at ambient condition: Exploring the usability of aromatic formates as N-formylating agents

A solvent- and catalyst-free N-formylation protocol has been developed for amines (1s–21s) where aromatic formates (1r–6r) were used as the N-formylating agents. The amine substrates include both primary and secondary aromatic amines (1s–19s) as well as aliphatic amine (20s) and a primary amide (21s). Structures of both the aromatic formate and amine components strongly influenced the rate of the reaction and yield of the N-formamide products. The reaction condition is mild and easy to operate. This protocol can be done smoothly under ambient conditions and gives high yield of formamide products. Furthermore, the present method cannot be applied for the formylation of thiol group (22s). This signifies its possible use for the chemoselective N-formylation of amine in the presence of thiol functionality.     

Convenient Route to Primary (Z)-Allyl Amines and Homologs

A convenient two-step procedure for the synthesis of primary (Z)-allyl amines, (Z)-homoallyl amines [(Z)-but-3-enylamines], and (Z)-pent-4-enylamines using the Wittig reaction was achieved. The use of nonstabilized ylides from triphenylphosphonium salt, potassium salt, and apolar solvent produced (Z/E)-geometric isomer ratios generally greater than 1.6. The amine moiety was masked using a phtalimide group that was removed successfully in the last step of the process in two different conditions, NH₂NH₂/EtOH/rt or CH₃NH₂/EtOH/rt. However, in some cases, reduction of the C = C double bond in the deprotection with hydrazine was concomitantly observed.     

Extraction of trivalent lanthanides and actinides by primary amines

Extraction of trivalent lanthanides and actinides by primary amines from nitric acid solution in presence of potassium phosphotungstate (K₁₀P₂W₁₇O₆₁) has been investigated. The effect of nitric acid, potassium phosphotungstate and extractant concentrations, of the organic solvents and the length of primary amine alkyl chain has been studied. Primary amines in chloroform can be used for separtion of lanthanides and actinides and their group isolation.     

Enhanced Formaldehyde‐Vapor Adsorption Capacity of Polymeric Amine‐Incorporated Aminosilicas

Airborne formaldehyde, which is a highly problematic volatile organic compound (VOC) pollutant, is adsorbed by polymeric amine‐incorporated silicas (aminosilicas), and the factors that affect the adsorption performance are systematically investigated. Three different types of polymeric amines 1) poly(ethyleneimine) branched (PEIBR); 2) poly(ethyleneimine) linear (PEILI); and 3) poly(allylamine) (PAA) are impregnated into two types of porous silicas [SBA‐15 and mesocellular foam (MCF) silicas] with systematic changes of the amine loadings. The adsorption results demonstrate that the adsorption capacity increases along with the amine loading until the polymeric amines completely fill the silica pores. This results in the MCF silica, which has a larger pore volume and hence can accommodate more polymeric amine before completely filling the pore, giving materials that adsorb more formaldehyde, with the largest adsorption capacity, q, of up to 5.7 mmol_HCHO g^?1 among the samples studied herein. Of the three different types of polymers, PAA, comprised of 100 % primary amines, showed the highest amine efficiency μ (mmol_HCHO/mmol_N) for capturing formaldehyde. The chemical structures of the adsorbed formaldehyde are analyzed by ¹³C cross‐polarization magic‐angle spinning (CP‐MAS) NMR, and it is demonstrated that the adsorbed formaldehyde is chemically attached to the aminosilica surface, forming hemiaminal and imine species. Because the chemical adsorption of formaldehyde forms covalent bonds, it is not desorbed from the aminosilicas below 130 °C based on temperature‐programed‐desorption (TPD) analysis. The high formaldehyde‐adsorption capacity and stability of the trapped formaldehyde on the amine surface in this study reveal the potential utility of aminosilicas as formaldehyde abatement materials.     

Effect of plasticization by amines on the physical properties of an acidic styrene copolymer

The dynamic mechanical properties of partly sulfonated (8.1 mole%) polystyrene were investigated at a frequency of ca. 1 Hz, following neutralization with various low molecular weight flexible and rigid amines. IR spectroscopic evidence suggested that the protonated amine units were possibly H-bonded to the sulfonate anion. Neutralization with flexible amines was found to result in a decrease in the glass transition temperature T_g by an amount proportional to the number of carbon atoms in the amine, while neutralization with rigid amines was found to result in an increase in T_g. It was also observed that the amines were more miscible with the sulfonated material than with polystyrene. It was concluded that the changes in properties observed upon neutralization are similar to those expected from a graft.