Synthesis of (+)‐13‐Stemarene and (+)‐18‐Deoxystemarin: Expeditious Preparation of the Key 6‐exo‐Hydroxybicyclo[2.2.2]octan‐2‐one Ethylene Dithioacetal

An expeditious preparation of the 6‐exo‐hydroxybicyclo[2.2.2]octan‐2‐one ethylene dithioacetal 2b , a key intermediate in the synthesis of (+)‐13‐stemarene ( 4 ) and (+)‐18‐deoxystemarin ( 5 ) is described. Compound 2b was obtained as the major product by equilibrating the endo rich mixture of 6‐hydroxybicyclo[2.2.2]octan‐2‐one ethylene dithioacetals 2 with TsOH in benzene at reflux, easily available from the corresponding hydroxy ketones 9 . The model experiments which preceeded the above transformation, not previously described in the literature, are also presented.     

A Fluorescent Blue Phosphazene Dye: Synthesis,Structure and Optical Properties of 1,6‐Bis(Dimethylamino)‐2,5,7,10‐Tetraazo‐1,6λ5‐Diphosphapyrene

Herein we report on the synthesis, structure, and optical properties of the fluorescent blue phosphazene dye 1,6‐bis(dimethylamino)‐2,5,7,10‐tetraazo‐1,6λ⁵‐diphosphapyrene, which was isolated as the unexpected product of the reaction between 1,4,5,8‐(tetraamino)naphthalene and [P(NMe₂)₃Br]Br. This dye, which turned out to be soluble in water and a range of organic solvents (including hexane, tetrahydrofuran / petroleum ether, acetonitrile, and ethanol), was structurally characterized by XRD. Its absorption as well as emission spectra and their sensitivity to pH variations were analyzed. The experimental work is complemented by quantum chemical calculations on the possible intermediate on the way to the isolated product and on its pK_a value.     

Synthesis and Structure of O,O‐Diethyl N‐[(trans‐4‐Aryl‐5,5‐dimethyl‐2‐oxido‐2λ5‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates

A study on the synthesis of the novel N‐(cyclic phosphonate)‐substituted phosphoramidothioates, i.e., O,O‐diethyl N‐[(trans‐4‐aryl‐5,5‐dimethyl‐2‐oxido‐2λ⁵‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates 4a – l , from O,O‐diethyl phosphoramidothioate ( 1 ), a benzaldehyde or ketone 2 , and a 1,3,2‐dioxaphosphorinane 2‐oxide 3 was carried out (Scheme 1 and Table 1). Some of their stereoisomers were isolated, and their structure was established. The presence of acetyl chloride was essential for this reaction and accelerated the process of intramolecular dehydration of intermediate 5 forming the corresponding Schiff base 7 (Scheme 2).     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

One‐Pot Synthesis of (−)‐Oseltamivir and Mechanistic Insights into the Organocatalyzed Michael Reaction

The one‐pot sequential synthesis of (?)‐oseltamivir has been achieved without evaporation or solvent exchange in 36 % yield over seven reactions. The key step was the asymmetric Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide, catalyzed by a diphenylprolinol silyl ether. The use of a bulky O‐silyl‐substituted diphenylprolinol catalyst, chlorobenzene as a solvent, and HCO₂H as an acid additive, were key to produce the first Michael adduct in both excellent yield and excellent diastereo‐ and enantioselectivity. Investigation into the effect of acid demonstrated that an acid additive accelerates not only the E–Z isomerization of the enamines derived from pentan‐3‐yloxyacetaldehyde with diphenylprolinol silyl ether, but also ring opening of the cyclobutane intermediate and the addition reaction of the enamine to (Z)‐N‐2‐nitroethenylacetamide. The transition‐state model for the Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide was proposed by consideration of the absolute configuration of the major and minor isomers of the Michael product with the results of the Michael reaction of pentan‐3‐yloxyacetaldehyde with phenylmaleimide and naphthoquinone.     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile and Vinyl Ethers: Cyclic Ketene Imines on the Pathway to 1 : 2 Cycloadducts

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile (BTE; (=E)‐ and (Z)‐1,2‐bis(trifluoromethyl)but‐2‐enedinitrile) were reacted with an excess of methyl vinyl ether, used as solvent, and furnished 1 : 2 adducts 6 (54%) and cyclobutanes 3 as 1 : 1 adducts (41%). The four diastereoisomeric bis‐adducts 6 (different ratios from (E)‐ and (Z)‐BTE) are derivatives of 1‐azabicyclo[4.2.0]oct‐5‐ene; X‐ray analyses and ¹⁹F‐NMR spectra revealed their structures. Since the cyclobutanes 3 are resistant to vinyl ether, the pathways leading to mono‐ and bis‐adducts must compete on the level of the intermediate l,4‐zwitterions 1 and 2 . The latter either cyclize to the cyclobutanes 3 or to six‐membered cyclic ketene imines 8 which accept a second molecule of vinyl ether to yield the bis‐adducts 6 . The occurrence of the highly strained ketene imines 8 gains credibility by comparison to stable seven‐membered cyclic ketene imines recently reported.     

Novel ortho‐linked fluorinated poly(ether‐imide)s based on 2,2′‐substituted 1,1′‐binaphthyl units

In this research, a new fluorinated diamine based on 2,2′‐substituted 1,1′‐binaphthyl units, 2,2′‐bis(2‐amino‐4‐trifluoromethylphenoxy)‐1,1′‐binaphthyl (AFPBN) was synthesized and then used to prepare the corresponding ortho‐linked poly(ether‐imide)s via chemical polyimidization with several aromatic carboxylic dianhydrides. The resulting poly(ether‐imide)s were fully characterized by FT‐IR, NMR, viscosity measurements, gel‐permeation chromatography, UV–vis, X‐ray diffraction, organo‐solubility, thermogravimetric analysis (TGA), and differential scanning calorimetry. Probing optical behavior of the colorless films prepared from these poly(ether‐imide)s demonstrated that they possess a high degree of optical transparency, and UV–visible absorption cut‐off wavelength values were found to be in the range of 404–471 nm. The resulting polymers exhibited excellent organo‐solubility in polar solvents such as dimethylformamide, dimethyl sulfoxide, pyridine, and even tetrahydrofuran. To investigate the heat stability of the samples, their thermograms obtained from TGA were plotted, and for example, it is found that the 10% weight loss temperature of representative polymer AFPBN/3,3′,4,4′‐benzophenonetetracarboxylic dianhydride occurred at 532°C in nitrogen. These poly(ether‐imide)s had glass‐transition temperatures (T_g's) up to 280°C. Two previously prepared analogues of AFPBN, i.e. nonfluorinated diamine DAM1 and para‐linked fluorinated diamine DAM2 used to prepare the corresponding poly(ether‐imide)s, were also considered to compare the results obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and properties of ortho‐linked aromatic polyimides based on 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene

A bis(ether amine) containing the ortho‐substituted phenylene unit and pendant tert‐butyl group, 1,2‐bis(4‐aminophenoxy)‐4‐tert‐butylbenzene, was synthesized and used as a monomer to prepare polyimides with six commercial dianhydrides via a conventional two‐stage procedure. The intermediate poly(amic acid)s had inherent viscosities of 0.78–1.44 dL/g, and most of them could be thermally converted into transparent, flexible, and tough polyimide films. The inherent viscosities of the resulting polyimides were in the range of 0.46–0.87 dL/g. All polyimides were noncrystalline, and most of them showed excellent solubility in polar organic solvents. The glass‐transition temperatures of these polyimides were in the range of 222–259 °C in differential scanning calorimetry and 212–282 °C in thermomechanicl analysis. These polyimides showed no appreciable decomposition up to 500 °C in thermogravimetric analysis in air or nitrogen. A comparative study of the properties with the corresponding polyimides without pendant tert‐butyl groups derived from 1,2‐bis(4‐aminophenoxy)benzene is also presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1551–1559, 2000     

Stereoselective Total Synthesis of Iso‐Cladospolide B and the 12 Membered‐Macrolactone (6S,12R)‐6‐Hydroxy‐12‐methyloxacyclododecane‐2,5‐dione

Total syntheses of iso‐cladospolide B ( 1 ) and the 12‐membered macrolactone (6S,12R)‐6‐hydroxy‐12‐methyloxacyclododecane‐2,5‐dione ( 2 ), a non‐natural product, were achieved from a common intermediate starting from commercially available 1,9‐nonane diol.     

Synthesis of 15‐Cyano‐12‐oxopentadecano‐15‐lactone and 15‐Cyano‐ 12‐oxopentadecano‐15‐lactam

15‐Cyano‐12‐oxopentadecano‐15‐lactone was synthesized in 59% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by reaction with trimethylsilylcyanide, hydrolysis, ring‐expansion, and Nef reaction. A two‐step, one‐pot synthesis of intermediate 2‐hydroxy‐4‐(1‐nitro‐2‐oxycyclododecyl)butanenitrile from 3‐(1‐nitro‐2‐oxocyclododecyl)propanal was developed and the conditions for the Nef reaction were studied. 15‐Cyano‐12‐oxopentadecano‐15‐lactam was synthesized in 40% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by Strecker reaction, ring‐expansion, and Nef reaction. The conditions for the Strecker and Nef reactions were studied. The structures of the target compounds, intermediates, and by‐product were characterized by IR, ¹H‐ and ¹³C‐NMR, and elemental analysis or MS.     

New organo‐soluble aromatic polyimides based on 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride and aromatic diamines

New aromatic tetracarboxylic dianhydride, having isopropylidene and bromo‐substituted arylene ether structure 3,3′,5,5′‐tetrabromo‐2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride, was synthesized by the reaction of 4‐nitrophthalonitrile with 3,3′,5,5′‐tetrabromobisphenol A, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). The novel aromatic polyetherimides having inherent viscosities up to 1.04 dL g⁻¹ were obtained by either a one‐step or a conventional two‐step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), pyridine, and even in less polar solvents like chloroform and tetrahydrofuran (THF). These aromatic polyimides had glass transition temperatures in the range of 256–303°C, depending on the nature of the diamine moiety. Thermogravimetric analysis (TGA) showed that all polymers were stable, with 10% weight loss recorded above 470°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1673–1680, 1999     

Chemoselectivity of the Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine

The reactions of 5‐benzylidene‐3‐phenylrhodanine ( 2 ; rhodanine=2‐thioxo‐1,3‐thiazolidin‐4‐one) with diazomethane ( 7a ) and phenyldiazomethane ( 7b ) occurred chemoselectively at the exocyclic C?C bond to give the spirocyclopropane derivatives 9 and, in the case of 7a , also the C‐methylated products 8 (Scheme 1). In contrast, diphenyldiazomethane ( 7c ) reacted exclusively with the C?S group leading to the 2‐(diphenylmethylidene)‐1,3‐thiazolidine 11 via [2+3] cycloaddition and a ‘two‐fold extrusion reaction’. Treatment of 8 or 9b with an excess of 7a in refluxing CH₂Cl₂ and in THF at room temperature in the presence of [Rh₂(OAc)₄], respectively, led to the 1,3‐thiazolidine‐2,4‐diones 15 and 20 , respectively, i.e., the products of the hydrolysis of the intermediate thiocarbonyl ylide. On the other hand, the reactions with 7b and 7c in boiling toluene yielded the corresponding 2‐methylidene derivatives 16, 21a , and 21b . Finally, the reaction of 11 with 7a occurred exclusively at the electron‐poor C?C bond, which is conjugated with the C?O group. In addition to the spirocyclopropane 23 , the C‐methylated 22 was formed as a minor product. The structures of the products (Z)‐ 8, 9a, 9b, 11 , and 23 were established by X‐ray crystallography.     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Asymmetric Proline‐Catalyzed Addition of Aldehydes to 3H‐Indol‐3‐ones: Enantioselective Synthesis of 2,3‐Dihydro‐1H‐indol‐3‐ones with Quaternary Stereogenic Centers

The proline‐catalyzed addition of various aliphatic aldehydes to sterically hindered 2‐aryl‐substituted 3H‐indol‐3‐ones affords 2,2‐disubstituted 2,3‐dihydro‐1H‐indol‐3‐one derivatives with excellent enantioselectivities. In addition, the synthesis of a chiral derivative, (S)‐2‐(2‐bromophenyl)‐2,3‐dihydro‐2‐(2‐hydroxyethyl)‐1H‐indol‐3‐one, which can be used as an intermediate for the preparation of the natural product hinckdentine A was accomplished with a high level of enantioselectivity.     

Reactions of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with 2,2‐Bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile: A Stepwise 1,3‐Dipolar Cycloaddition

The reaction of 1,4,5‐trisubstituted 1H‐imidazole‐3‐oxides 1 with 2,2‐bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile ( 7 , BTF) yielded the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 10 and 2‐(1,3‐dihydro‐2H‐imidazol‐2‐ylidene)malononitriles 11 , respectively, depending on the solvent used. In one example, a 1 : 1 complex, 12 , of the 1H‐imidazole 3‐oxide and hexafluoroacetone hydrate was isolated as a second product. The formation of the products is explained by a stepwise 1,3‐dipolar cycloaddition and subsequent fragmentation. The structures of 11d and 12 were established by X‐ray crystallography.     

First Total Synthesis of N‐(3‐Guanidinopropyl)‐2‐(4‐hydroxyphenyl)‐2‐oxoacetamide

The first total synthesis of the α‐oxo amide‐based natural product, N‐(3‐guanidinopropyl)‐2‐(4‐hydroxyphenyl)‐2‐oxoacetamide ( 3 ), isolated from aqueous extracts of hydroid Campanularia sp., has been achieved. The α‐oxo amide 12 , prepared via the oxidative amidation of 1‐[4‐(benzyloxy)phenyl]‐2,2‐dibromoethanone ( 9a ) with 4‐{[(tert‐butyl)(dimethyl)silyl]oxy}butan‐1‐amine ( 10a ), has been used as the key intermediate in the total synthesis of 3 as HBr salt. On the way, an expeditious total synthesis of polyandrocarpamide C ( 2c ), isolated from marine ascidian Polyandrocarpa sp., was carried out in four steps.     

Secondary Amine‐Catalyzed Asymmetric γ‐Alkylation of α‐Branched Enals via Dienamine Activation

The direct and enantioselective γ‐alkylation of α‐substituted α,β‐unsaturated aldehydes proceeding under dienamine catalysis is described. We have found that the Seebach modification of the diphenyl‐prolinol silyl ether catalyst in combination with saccharin as an acidic additive promotes an S_N1 alkylation pathway, while ensuring complete γ‐site selectivity and a high stereocontrol. Theoretical and spectroscopic investigations have provided insights into the conformational behavior of the covalent dienamine intermediate derived from the condensation of 2‐methylpent‐2‐enal and the chiral amine. Implications for the mechanism of stereoinduction are discussed.     

Crystallographic report: Crystal structure of bis(2,4,6‐tri‐tert‐butylphenolato‐O) bis(tetrahydrofuran‐O) samarium (N,N‐η2‐azobenzene) diethyl ether solvate

Reaction of divalent Sm(OAr)₂(THF)₃ (Ar = C₆H₂‐tert‐Bu₃‐2,4,6; THF = tetrahydrofuran) with one equivalent of azobenzene in THF and crystallization of the product in diethyl ether afforded the title complex (ArO)₂(THF)₂Sm(η²‐N₂Ph₂)·Et₂O in good yield. In the complex, the N? N bond length for the azobenzene species is lengthened. The two Sm? N bonds are equivalent, and their bond lengths are intermediate between the donor bond and the single bond. Copyright © 2005 John Wiley & Sons, Ltd.     

1,2‐Oxazine N‐Oxides as Catalyst Resting States in Michael Additions of Aldehydes to Nitro Olefins Organocatalyzed by α,α‐Diphenylprolinol Trimethylsilyl Ether

By combining enamines, derived from aldehydes and diphenylprolinol trimethylsilyl ether (the Hayashi catalyst), with nitroethenes ((D₆)benzene, 4‐Å molecular sieves, room temperature) intermediates of the corresponding catalytic Michael‐addition cycles were formed and characterized (IR, NMR, X‐ray analysis; Schemes 3–6 and Fig. 1–3). Besides cyclobutanes 2 , 1,2‐oxazine N‐oxide derivatives 3 – 6 and 8 have been identified for the first time, some of which are very stable compounds. It may not be a lack of reactivity (between the intermediate enamines and nitro olefins) that leads to failure of the catalytic reactions (Schemes 3–5) but the high stability of catalyst resting states. The central role zwitterions play in these processes is discussed (Schemes 1 and 2).