Struktur und magnetische Eigenschaften von Bis{3‐amino‐1,2,4‐triazolium(1+)}pentafluoromanganat(III): (3‐atriazH)2[MnF5]

Structure and Magnetic Properties of Bis{3‐amino‐1,2,4‐triazolium(1+)}pentafluoromanganate(III): (3‐atriazH)₂[MnF₅] The crystal structure of (3‐atriazH)₂[MnF₅], space group P1, Z = 4, a = 8.007(1) Å, b = 11.390(1) Å, c = 12.788(1) Å, α = 85.19(1)°, β = 71.81(1)°, γ = 73.87(1)°, R = 0.034, is built by octahedral trans‐chain anions [MnF₅]^2–_∞ separated by the mono‐protonated organic amine cations. The [MnF₆] octahedra are strongly elongated along the chain axis (<Mn–F_ax> 2.135 Å, <Mn–F_eq> 1.842 Å), mainly due to the Jahn‐Teller effect, the chains are kinked with an average bridge angle Mn–F–Mn = 139.3°. Below 66 K the compound shows 1D‐antiferromagnetism with an exchange energy of J/k = –10.8 K. 3D ordering is observed at T_N = 9.0 K. In spite of the large inter‐chain separation of 8.2 Å a remarkable inter‐chain interaction with |J′/J| = 1.3 · 10^–5 is observed, mediated probably by H‐bonds. That as well as the less favourable D/J ratio of 0.25 excludes the existence of a Haldene phase possible for Mn³⁺ (S = 2).     

Baeckeins A and B,Two Novel 6‐Methylflavonoids from the Roots of Baeckea frutescens

A pair of novel isomeric 6‐methylflavonoids, named baeckeins A ( 1 ) and B ( 2 ), were isolated from the roots of Baeckea frutescens. The two compounds possess a unique C₂₃ skeleton, resulting from the 6‐methylation and 8‐arylation of a flavonol (=3‐hydroxy‐2‐phenyl‐4H‐1‐benzopyran‐4‐one) framework and the formation of an unusual lactone ring E. Their structures were elucidated by detailed spectroscopic analyses, including HR‐ESI‐MS and 1D‐ and 2D‐NMR data (HSQC, HMBC, and ROESY). A plausible biogenetic pathway for compounds 1 and 2 is also proposed (Scheme).     

Megastigmane Glycosides from Docynia indica and Their Anti‐inflammatory Activities

Using various chromatographic methods, three new megastigmane glycosides, docynicasides A – C ( 1  –  3 ) and ten known, (6S,9R)‐vomifoliol 9‐O‐β‐d ‐xylopyranosyl‐(1′′→6′)‐O‐β‐d ‐glucopyranoside ( 4 ), hyperin ( 5 ), quercitrin ( 6 ), quercetin 3‐α‐l ‐arabinofuranoside ( 7 ), naringenin 7‐O‐β‐d ‐glucopyranoside ( 8 ), phloridzin ( 9 ), phloretin 2′‐O‐β‐d ‐xylopyranosyl‐(1→6)‐β‐d ‐glucopyranoside ( 10 ), pinosylvin 3‐O‐β‐d ‐glucopyranoside ( 11 ), tormentic acid ( 12 ), and chlorogenic acid methyl ester ( 13 ) were isolated from the fruits of Docynia indica. Their chemical structures were elucidated by physical and chemical methods. All the isolated compounds were evaluated for the inhibitory activity on NO production in LPS‐stimulated BV2 cells. As the results, compounds 3  –  5 showed significant inhibitory activity on LPS‐stimulated NO production in BV2 cells with the IC₅₀ values ranging from 21.0 to 29.3 μm .     

Hydrogen‐Bond‐Based Magnetic Exchange Between μ‐Diethylnicotinamide(aqua)bis(X‐salicylato)copper(II) Polymeric Chains

Polymeric salicylatocopper(II) complexes of unusual composition [C u(X‐ sal)₂( μ‐denia)(H₂O)]_n [denia = diethylnicotinamide, and X‐sal = 5‐methylsalicylate ( 1 ), 3‐methylsalicylate ( 2 ), 4‐methoxysalicylate ( 3 ), 3,5‐dichlorosalicylate ( 4 ) and 3,5‐dibromosalicylate ( 5 )] were synthesized and characterized. Magnetic measurements were performed in the temperature range 1.8–300 K. The structural unit of all complexes consists of a Cu^II atom, which is monodentately coordinated by the pair of X‐salicylate anions in trans positions. Water and the diethylnicotinamide ligand occupy the other two basal plane positions of the tetragonal pyramid. The axial positions are occupied by a diethylnicotinamide oxygen atom of neighboring structural units, thus forming a spiral polymeric structure parallel to b axis. Magnetic measurements showed that all complexes 1 – 5 exhibit a susceptibility maximum at about 6–8 K. The obtained data fit to Bleaney–Bowers equation gave singlet‐triplet energy gaps 2J = –8.60 cm^–1 for 1 , 2J = –6.57 cm^–1 for 2 , 2J = –8.57 cm^–1 for 3 , 2J = –6.82 cm^–1 for 4 , and 2J = –6.45 cm^–1 for 5 . The supramolecular structure based on hydrogen bonds [described by supramolecular synthons R₂²(10) and R₂²(12)] is the pathway for antiferromagnetic interactions of the magnetically coupled pairs of copper atoms of neighboring chains within the 2D supramolecular layers. The results of the magnetic measurements suggest involvement of the COO groups in the magnetic interaction pathway for all five complexes.     

New Compounds from the Roots and Stems of Trigonostemon lii and Their Cytotoxic Activities

A new carboline alkaloid, Trifiline D ( 1 ) and a new degraded diterpenoid, Trigoxyphin X ( 4 ) were isolated from the roots and stems of Trigonostemon lii. Their structures were elucidated by extensive spectroscopic analyses including 1D‐ and 2D‐NMR techniques. Compound 1 exhibited weak inhibitory activity against MCF‐7, A‐549, MGC‐803, and COLO‐205 with IC₅₀ values ranging from 27.4 to 35.4 μm .     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Gas‐phase fragmentation reactions of protonated benzofuran‐ and dihydrobenzofuran‐type neolignans investigated by accurate‐mass electrospray ionization tandem mass spectrometry

We have investigated gas‐phase fragmentation reactions of protonated benzofuran neolignans (BNs) and dihydrobenzofuran neolignans (DBNs) by accurate‐mass electrospray ionization tandem and multiple‐stage (MSⁿ) mass spectrometry combined with thermochemical data estimated by Computational Chemistry. Most of the protonated compounds fragment into product ions B ([M + H–MeOH]⁺), C ([ B –MeOH]⁺), D ([ C –CO]⁺), and E ([ D –CO]⁺) upon collision‐induced dissociation (CID). However, we identified a series of diagnostic ions and associated them with specific structural features. In the case of compounds displaying an acetoxy group at C‐4, product ion C produces diagnostic ions K ([ C –C₂H₂O]⁺), L ([ K –CO]⁺), and P ([ L –CO]⁺). Formation of product ions H ([ D –H₂O]⁺) and M ([ H –CO]⁺) is associated with the hydroxyl group at C‐3 and C‐3′, whereas product ions N ([ D –MeOH]⁺) and O ([ N –MeOH]⁺) indicate a methoxyl group at the same positions. Finally, product ions F ([ A –C₂H₂O]⁺), Q ([ A –C₃H₆O₂]⁺), I ([ A –C₆H₆O]⁺), and J ([ I –MeOH]⁺) for DBNs and product ion G ([ B –C₂H₂O]⁺) for BNs diagnose a saturated bond between C‐7′ and C‐8′. We used these structure‐fragmentation relationships in combination with deuterium exchange experiments, MSⁿ data, and Computational Chemistry to elucidate the gas‐phase fragmentation pathways of these compounds. These results could help to elucidate DBN and BN metabolites in in vivo and in vitro studies on the basis of electrospray ionization ESI‐CID‐MS/MS data only.     

PbADC and PbADC·H2O: Two Coordination Polymers with Acetylenedicarboxylate (ADC2–) as Bridging Ligand

Single crystals of PbADC ( 1 ) and PbADC · H₂O ( 2 ) formed at the phase boundary of an aqueous silica gel containing acetylenedicarboxylic acid (HOOC–C≡C–COOH, H₂ADC) and an aqueous solution containing Pb(NO₃)₂. By choosing different concentrations of Pb(NO₃)₂, compounds 1 and 2 were obtained as phase pure products. Additionally, 1 was obtained by grinding Pb(CH₃COO)₂ · 3H₂O with H₂ADC resulting in a polycrystalline sample. The crystal structures of 1 (I4₁/amd, Z = 4; SrADC type structure) and 2 (P2₁/c, Z = 4, new structure type) were solved and refined from X‐ray single crystal data. Compound 1 exhibits a three‐dimensional framework structure: lead cations with a diamond‐like arrangement are interconnected by bridging ADC^2– ligands. In 2 double‐layers are formed by lead cations, bridging ADC^2– anions, and water molecules. These layers are held together by hydrogen bonds through water molecules and oxygen atoms of the ADC^2– ligands. Suspending 1 for 24 h in water at ambient conditions leads to the formation of 2 , which can be converted to 1 again by careful dehydration at approx. 400 K in vacuo. This reversible reaction can be structurally interpreted as a topochemical reaction, which transforms a 3D coordination network into a 2D network structure and vice versa, as both crystal structures show noticeable structural similarities.     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

Synthesis and characterization of water‐soluble copper(II), cobalt(II) and zinc(II) complexes derived from 8‐hydroxyquinoline‐5‐sulphonic acid: DNA binding and cleavage studies

Three water‐soluble complexes, [Cu₂L₂Cl₂] ( 1 ), [CoL₂(im)₂] ( 2 ) and [ZnLClH₂O] ( 3 ) (HL = 8‐hydroxyquinoline‐5‐sulphonic acid; im = N ‐methylimidazole), were prepared and characterized using various spectral techniques. The DNA binding behaviour of complexes 1 – 3 was studied using UV–visible and circular dichroism (CD) spectra and cyclic voltammetry. All three complexes exhibit hypochromism but complexes 1 and 3 alone give a red shift of 4 nm with a significant binding constant of K _b = 2.1 × 10⁴ and 1.0 × 10⁴ M⁻¹, respectively, but complex 2 shows no red shift with lower K _b of 4.1 × 10³ M⁻¹. The voltammetric E _1/2 of complex 1 on interaction with herring sperm DNA shifts to a more positive potential, as expected, than complex 2 due to higher DNA affinity. Additionally, analysis of electrochemical data yields a value of K ₊/K ₂₊ greater than one suggesting that complex 1 binds to DNA through intercalation in the M(I) state. Evidently in CD spectral analysis, complex 1 exhibits a decrease in molar ellipticity with a red shift of 10 nm and a significant decrease in intensity compared to complexes 2 and 3 . This clearly indicates that complex 1 induces the B → A transition to a greater extent than 2 and 3 . Oxidative cleavage using circular plasmid pUC18 DNA with complex 1 was investigated using gel electrophoresis. Interestingly, complex 1 displays a strong DNA binding affinity and is efficient in cleaving DNA in the presence of H₂O₂ at pH = 8.0 at 37 °C.     

Luminescent Benzoquinolate‐Isocyanide Platinum(II) Complexes: Effect of Pt⋅⋅⋅Pt and π⋅⋅⋅π Interactions on their Photophysical Properties

The neutral compounds [Pt(bzq)(CN)(CNR)] (R=tBu ( 1 ), Xyl ( 2 ), 2‐Np ( 3 ); bzq= benzoquinolate, Xyl=2,6‐dimethylphenyl, 2‐Np=2‐napthyl) were isolated as the pure isomers with a trans‐C_bzq,CNR configuration, as confirmed by ¹³C{¹H} NMR spectroscopy in the isotopically marked [Pt(bzq)(¹³CN)(CNR)] (R=tBu ( 1′ ), Xyl ( 2′ ), 2‐Np ( 3′ )) derivatives (δ¹³C_CN≈110 ppm; ¹J(Pt,¹³C)≈1425 Hz]. By contrast, complex [Pt(bzq)(C≡CPh)(CNXyl)] ( 4 ) with a trans‐N_bzq,CNR configuration, has been selectively isolated from [Pt(bzq)Cl(CNXyl)] (trans‐N_bzq,CNR) using Sonogashira conditions. X‐ray diffraction studies reveal that while 1 adopts a columnar‐stacked chain structure with Pt–Pt distances of 3.371(1) Å and significant π???π interactions (3.262 Å), complex 2 forms dimers supported only by short Pt???Pt (3.370(1) Å) interactions. In complex 4 the packing is directed by weak bzq???Xyl and bzq???C≡E (C, N) interactions. In solid state at room temperature, compounds 1 and 2 both show a bright red emission (?=42.1 % 1 , 57.6 % 2 ). Luminescence properties in the solid state at 77 K and concentration‐dependent emission studies in CH₂Cl₂ at 298 K and at 77 K are also reported for 1 , 1·CHCl3 , 2 , 2' , 2·CHCl3 , 3 , 4 .     

Methyl 4‐O‐β‐D‐mannopyranosyl β‐D‐xylopyranoside

Methyl β‐D‐mannopyranosyl‐(1→4)‐β‐D‐xylopyranoside, C₁₂H₂₂O₁₀, (I), crystallizes as colorless needles from water, with two crystallographically independent molecules, (IA) and (IB), comprising the asymmetric unit. The internal glycosidic linkage conformation in molecule (IA) is characterized by a ϕ′ torsion angle (O5′_Man—C1′_Man—O1′_Man—C4_Xyl; Man is mannose and Xyl is xylose) of −88.38 (17)° and a ψ′ torsion angle (C1′_Man—O1′_Man—C4_Xyl—C5_Xyl) of −149.22 (15)°, whereas the corresponding torsion angles in molecule (IB) are −89.82 (17) and −159.98 (14)°, respectively. Ring atom numbering conforms to the convention in which C1 denotes the anomeric C atom, and C5 and C6 denote the hydroxymethyl (–CH₂OH) C atom in the β‐Xylp and β‐Manp residues, respectively. By comparison, the internal glycosidic linkage in the major disorder component of the structurally related disaccharide, methyl β‐D‐galactopyranosyl‐(1→4)‐β‐D‐xylopyranoside), (II) [Zhang, Oliver & Serriani (2012). Acta Cryst. C 68 , o7–o11], is characterized by ϕ′ = −85.7 (6)° and ψ′ = −141.6 (8)°. Inter‐residue hydrogen bonding is observed between atoms O3_Xyl and O5′_Man in both (IA) and (IB) [O3_Xyl...O5′_Man internuclear distances = 2.7268 (16) and 2.6920 (17) Å, respectively], analogous to the inter‐residue hydrogen bond detected between atoms O3_Xyl and O5′_Gal in (II). Exocyclic hydroxymethyl group conformation in the β‐Manp residue of (IA) is gauche–gauche, whereas that in the β‐Manp residue of (IB) is gauche–trans.     

Vanadium(III) complexes containing phenoxy–imine–thiophene ligands: Synthesis,characterization and application to homo‐ and copolymerization of ethylene

A set of vanadium(III) complexes, namely {SNO}VCl₂(THF)₂ ( 2a , SNO = thiophene‐(N═CH)‐phenol; 2b , SNO = 5‐phenylthiophene‐(N═CH)‐phenol; 2c , SNO = 5‐phenylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2d , SNO = 5‐methylthiophene‐(N═CH)‐phenol; 2e , SNO = 5‐methylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2f , SNO = 5‐methylthiophene‐(N═CH)‐2‐methylphenol; 2g , SNO = 5‐methylthiophene‐(N═CH)‐4‐fluorophenol), were synthesized by reaction of VCl₃(THF)₃ with phenoxy–imine–thiophene proligands ( 1a – g ). All vanadium(III) complexes were characterized using elemental analysis and infrared and electron paramagnetic resonance spectroscopies. Upon activation with methylaluminoxane (MAO), vanadium precatalysts 2a – g proved active in the polymerization of ethylene (213.6–887.2 kg polyethylene (mol[V])⁻¹⋅h⁻¹), yielding high‐density polyethylenes with melting temperatures in the range 133–136 °C and crystallinities varying from 28 to 41%. The 2e/ MAO catalyst system was able to copolymerize ethylene with 1‐hexene affording poly(ethylene‐co ‐1‐hexene)s with melting temperatures varying from 126 to 102 °C and co‐monomer incorporation in the range 3.60–4.00%.     

Synthesis and thermoresponsive property of end‐functionalized poly(N‐isopropylacrylamide) with pyrenyl group

N–Isopropylacrylamide (NIPAM) was polymerized using 1‐pyrenyl 2‐chloropropionate (PyCP) as the initiator and CuCl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as the catalyst system. The polymerizations were performed using the feed ratio of [NIPAM]₀/[PyCP]₀/[CuCl]₀/[Me₆TREN]₀ = 50/1/1/1 in DMF/water of 13/2 at 20 °C to afford an end‐functionalized poly(N‐isopropylacrylamide) with the pyrenyl group (Py–PNIPAM). The characterization of the Py–PNIPAM using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry provided the number–average molecular weight (M_n,MS). The lower critical solution temperature (LCST) for the liquid–solid phase transition was 21.7, 24.8, 26.5, and 29.3 °C for the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000, respectively; hence, the LCST was dramatically lowered with the decreasing M_n,MS. The aqueous Py–PNIPAM solution below the LCST was characterized using a static laser light scattering (SLS) measurement to determine its molar mass, M_w,SLS. The aqueous solutions of the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000 showed the M_w,SLS of 586,000, 386,000, 223,000, and 170,000, respectively. Thus, lowering the LCST for Py–PNIPAM should be attributable to the formation of the PNIPAM aggregates. The LCST of 21.7 °C for Py–PNIPAM with the M_n,MS of 3000 was effectively raised by adding β‐cyclodextrin (β‐CD) and reached the constant value of ～26 °C above the molar ratio of [β‐CD]/[Py–PNIPAM] = 2/1, suggesting that β‐CD formed an inclusion complex with pyrene in the chain‐end to disturb the formation of PNIPAM aggregates, thus raising the LCST. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1117–1124, 2006     

Chiral one‐dimensional hydrogen‐bonded architectures constructed from single‐enantiomer phosphoric triamides

The two single‐enantiomer phosphoric triamides N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(S)‐(−)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(S)‐(−)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted L‐1 , and N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(R)‐(+)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(R)‐(+)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted D‐1 , both C₂₃H₂₄F₂N₃O₂P, have been investigated. In their structures, chiral one‐dimensional hydrogen‐bonded architectures are formed along [100], mediated by relatively strong N—H…O(P) and N—H…O(C) hydrogen bonds. Both assemblies include the noncentrosymmetric graph‐set motifs R₂²(10), R₂¹(6) and C₂²(8), and the compounds crystallize in the chiral space group P1. Due to the data collection of L‐1 at 120 K and of D‐1 at 95 K, the unit‐cell dimensions and volume show a slight difference; the contraction in the volume of D‐1 with respect to that in L‐1 is about 0.3%. The asymmetric units of both structures consist of two independent phosphoric triamide molecules, with the main difference being seen in one of the torsion angles in the OPNHCH(CH₃)(C₆H₅) part. The Hirshfeld surface maps of these levo and dextro isomers are very similar; however, they are near mirror images of each other. For both structures, the full fingerprint plot of each symmetry‐independent molecule shows an almost asymmetric shape as a result of its different environment in the crystal packing. It is notable that NMR spectroscopy could distinguish between compounds L‐1 and D‐1 that have different relative stereocentres; however, the differences in chemical shifts between them were found to be about 0.02 to 0.001 ppm under calibrated temperature conditions. In each molecule, the two chiral parts are also different in NMR media, in which chemical shifts and P–H and P–C couplings have been studied.     

A photochemical route to ferrocenyl‐substituted ferrapyrrolinone complexes

In the presence of iron pentacarbonyl, photochemical reaction between phenylisocyanate and ferrocenylacetylene results in ferrapyrrolinone complex [Fe₂(CO)₆(μ₂‐η³‐FcC═C(H)C(O)NPh)] ( 1 ) and maleimide 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione ( 2 ). Under similar experimental conditions, ferrocenyl−/phenyl‐substituted butadiyne primarily shows the activation of only one C☰C bond and results in ferrapyrrolinone complexes [Fe₂(CO)₆(μ₂‐η³‐FcC═C(C☰CR)C(O)NPh)] ( 3 , R = Fc; 3a , R = Ph), maleimides 3‐ferrocenyl‐1‐phenyl‐4‐(ferrocenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5 ) and 3‐ferrocenyl‐1‐phenyl‐4‐(phenylethynyl)‐1H –pyrrole‐2,5‐dione ( 5a ) and [Fe₂(CO)₆(μ₂‐η³‐FcC═C(R)C(O)NPh)] ( 4 ; R  = 3‐ferrocenyl‐1‐phenyl‐1H ‐pyrrole‐2,5‐dione). Compound 4 consists of ferrapyrrolinone and a maleimide unit, formed by the activation of both C☰C bonds of diferrocenylbutadiyne. Activation of both C☰C bonds in a substituted butadiyne is a rare observation. Formation of the ferrapyrrolinone compounds is an advance over the earlier reported methods which generally use internal alkynes and involve prior synthesis of other clusters.     

Synthesis and characterization of stereoregular AABB‐type polymannaramides

The condensation of D ‐mannaro‐1,4:6,3‐dilactone ( 2 ) with even‐numbered alkylenediamines (C₂, C₆–C₁₂) in a methanol solution and in the presence of triethylamine afforded polymannaramides 3 – 7 , which were isolated directly as white solids with various hydrophobic–hydrophilic characters. Because all the stereocenters in 2 possessed an S configuration, the random polymerization led to optically active, stereoregular polyhydroxypolyamides. The polymers were characterized by elemental analysis and IR, ¹H NMR, and ¹³C NMR spectroscopy. Their number‐average molecular weights were estimated by ¹H NMR spectral integration analysis. Thermal and powder X‐ray diffraction studies revealed that compounds 3 – 7 were poorly crystalline. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1024–1030, 2001     

Poly(silarylene–siloxane)polyimides from allyl‐terminated oligoimides and hydride‐functional silarylene–siloxanes via hydrosilylation polymerization

This research was focused on the design and execution of new synthetic routes to low‐temperature‐curable poly(silarylene–siloxane)polyimides. The synthesis of individual oligoimide and silarylene–siloxane blocks was followed by hydrosilylation polymerization to produce crosslinked copolymers. The silarylene–siloxane and polyimide blocks were structurally characterized by IR and ¹H NMR spectroscopy and size exclusion chromatography. The high‐temperature resistance of the copolymers was evaluated through the measurement of heat distortion temperatures (T_HD's) via thermomechanical analysis and by the determination of the weight loss at elevated temperatures via thermogravimetric analysis. Glass‐transition temperatures (T_g's) of the silarylene–siloxane segments were measured by differential scanning calorimetry. Hydrosilylation curing was conducted at 60 °C in the presence of chloroplatinic acid (H₂PtCl₆). The copolymers displayed both high‐temperature resistance and low‐temperature flexibility. We observed T_g of the silarylene–siloxane segment as low as ?77 °C and T_HD of the polyimide segment as high as 323 °C. The influence of various oligoimide molecular weights on the properties of copolymers containing the same silarylene–siloxane was examined. The effect of various silarylene–siloxane molecular weights on the properties of copolymers containing the same oligoimide was also examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4922–4932, 2005     

New Rh(III) complexes of 5‐methyl‐5‐(pyridyl)‐2,4‐imidazolidenedione: Synthesis,X‐ray structure,electrochemical study and catalytic behaviour for hydrogenation of ketones

We describe the reaction of anion [RhCl₆]³⁻ with a series of hydantoin ligands (HL1, HL2 and HL3 = 5‐methyl‐5‐(2‐, 3‐ and 4‐pyridyl)‐2,4‐imidazolidenedione, respectively). Based on spectroscopic, cyclic voltammetric, elemental and MS analyses, the complexes have the general formula K[RhCl₂(L1)₂] ( 1 ), cis ‐ and trans ‐K[RhCl₄(HL2)₂] ( 2a and 2b ) and cis ‐ and trans ‐K[RhCl₄(HL3)₂] ( 3a and 3b ). Complexes 2a , 2b , 3a and 3b were characterized successfully using infrared, ¹H NMR and ¹³C NMR spectral analyses. Dissolution of complex 1 in dimethylsulfoxide (DMSO) led to elimination of one KL1 ligand and coordination of two DMSO molecules as ligands and transformation of this complex to cis ‐ and trans ‐[RhCl₂L1(DMSO)₂] ( 1a and 1b ). Recrystallization led to separation and isolation of crystals of 1a from the initial mixture. X‐ray analysis results showed that this complex was crystallized as solvated complex cis ‐[RhCl₂L1(DMSO)₂]DMSO. The catalytic activity of these complexes was then evaluated for the hydrogenation of various ketones.     

X‐ray structures,spectroscopic, electrochemical,thermal, antibacterial,and DFT studies of two nickel(II) and cobalt(III) complexes constructed from a new quinazoline‐type ligand

Two two‐dimensional supramolecular Nickel(II) and Cobalt(III) complexes, [Ni( L ² )₂]·2CH₃OH ( 1 ) and [2Co( L ² )₂] ( 2 ) ( HL ²  = 1‐(2‐{[(E)‐3‐bromo‐5‐chloro‐2‐hydroxybenzylidene]amino}phenyl)ethanone oxime), were synthesized via complexation of salts acetate with HL ¹ (2‐(3‐bromo‐5‐chloro‐2‐hydroxyphenyl)‐4‐methyl‐1,2‐dihydroquinazoline 3‐oxide, H is the deprotonatable hydrogen). During the reaction, the C–N bond in HL ¹ is converted into the C=N–OH group in HL ² . The spectroscopic data of both complexes were compared with the ligand HL ¹ . HL ¹ and both complexes were determined by single‐crystal X‐ray crystallography. The differently geometric features of the obtained complexes 1 and 2 are observed. In the crystal structure, 1 and 2 form an infinite 1‐D chain‐like and 2‐D supramolecular frameworks. EPR spectroscopy of 2 was investigated. Moreover, electrochemical properties and antimicrobial activities of both complexes were also studied. In addition, the calculated HOMO and LUMO energies show the character of HL ¹ , complexes 1 and 2 . The electronic transitions and spectral features of HL ¹ and both complexes were discussed by TD‐DFT calculations.