A high-speed photographic study of the transition from deflagration to detonation wave

Experiments were conducted to investigate the DDT process of the oxyhydrogen gas in the rectangular detonation tube of 3 m long. The repeated obstacle was installed near the ignition plug and the effects of the obstacle on the DDT process were investigated. The behaviour of the combustion and detonation wave were visualized utilizing Imacon high-speed camera with the aid of Schlieren optics. As a result, DDT process was visualized, i.e. (i) multiple shock waves were induced by the expanding combustion wave, because the combustion flame played a role as a piston and compressed the unburned gases. (ii) The acceleration of the combustion wave was occurred and the distance between the shock wave and the combustion flame became shorter. (iii) Eventually, the local explosion was occurred and cause overdriven detonation wave to propagate at the velocity of about 3 kms⁻¹. An abridged version of this paper was presented at the 15th Int. Colloquium on the Dynamics of Explosions and Reactive Systems at Boulder, Colorado, from July 30 to August 4, 1995     

Hydrogen detonation and fast deflagration triggered by a turbulent jet of combustion products

Initiation of detonation by a turbulent jet of combustion products has been studied in a detonation tube of 141 mm inner diameter. Jet formation techniques based on either a perforated plate or bursting membrane subjected to the impact of a stable detonation wave were utilized. Critical conditions of detonation initiation in hydrogen–air and hydrogen–oxygen–nitrogen mixtures have been found to depend on both the mixture sensitivity and the geometrical parameters of the arrangement. PACS 47.70.Fw; 82.33.Vx; 82.40.Fp This paper was based on work that was presented at the 19th Inter-national Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan, July 27 - August 1, 2003     

Optimization of the deflagration to detonation transition: reduction of length and time of transition

The aim of this experimental investigation is the study of Deflagration to Detonation Transition (DDT) in tubes in order to (i) reduce both run-up distance and time of transition (L _DDT and t _DDT) in connection with Pulsed Detonation Engine applications and to (ii) attempt to scale L _DDT with λ_CJ (the detonation cellular structure width). In DDT, the production of turbulence during the long flame run-up can lead to L _DDT values of several meters. To shorten L _DDT, an experimental set-up is designed to quickly induce highly turbulent initial flow. It consists of a double chamber terminated with a perforated plate of high Blockage Ratio (BR) positioned at the beginning of a 26 mm inner diameter tube containing a “Shchelkin spiral” of BR ≈ 0.5. The study involves stoichiometric reactive mixtures of H₂, CH₄, C₃H₈, and C₂H₄ with oxygen and diluted with N₂ in order to obtain the same cell width λ_CJ≈10 mm at standard conditions. The results show that a shock-flame system propagating with nearly the isobaric speed of sound of combustion products, called the choking regime, is rapidly obtained. This experimental set-up allows a L _DDT below 40 cm for the mixtures used and a ratio L _DDT/λ_CJ ranging from 23 to 37. The transition distance seems to depend on the reduced activation energy (E _a/RT _c) and on the normalized heat of reaction (Q/a ₀ ²). The higher these quantities are, the shorter the ratio L _DDT/λ_CJ is. PACS 47.40.Rs · 47.60.+i · 47.70.Pq · 47.80.CbThis paper was based on the work that was presented at the 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan, July 27–August 1, 2003.     

快速热点火熔奥梯铝炸药燃烧转爆轰实验研究

以熔铸型含铝混合炸药熔奥梯铝为对象,研究铸装含铝混合炸药快速热点火后的燃烧转爆轰特性。建立了快速热点火燃烧转爆轰实验平台,由实验装置(加热装置、约束钢管、炸药)、压力测试系统、光纤测速系统组成;加热装置加热15 mm厚45钢钢板,峰值温度大于1 100℃,温升速率为85～95℃/s。开展了快速热点火带壳熔奥梯铝炸药燃烧转爆轰实验,由加热装置加热约束钢管内熔奥梯铝炸药,炸药化学反应阵面压力和传播速度分别由压电性高压压力传感器和光纤探针测定;实测阵面压力约1 GPa,传播速度最大约2 600 m/s。由光纤数据获得炸药化学反应阵面传播轨迹,通过特征线方法获得冲击形成点,半定量给出冲击形成距离大于850 mm;并比较了管体破片质量实测值与炸药完全爆轰时破片平均质量计算值,实测值远小于计算值。综合实测化学反应阵面传播速度和压力、冲击形成距离分析、破片质量比较,可确定熔奥梯铝炸药没有发生完全爆轰,其化学反应状态为爆燃。另外,采用Adams和Pack模型、CJ燃烧模型,都能够半定量的预估冲击形成距离和燃烧波后压力,为实验设计提供依据,但CJ燃烧模型的计算结果更接近于实测值。     

The influence of detonation cell size and regularity on the propagation of gaseous detonations in granular materials

This paper presents results from an experimental study of transmission of gaseous detonation waves through various granular filters. Spherical glass beads of 4 and 8 mm diameter and crushed rock of 7.5 mm volume averaged diameter were used as filter material. Varying the initial pressure of the detonating gas mixture controlled the detonation cell size. Dilution with argon was used to vary the detonation cell regularity. The complete range from almost no detonation velocity deficit to complete extinction of the combustion wave was observed. The existing correlation for gaseous detonation velocity deficit where is the critical diameter for the gaseous detonation and is the pore size, is found to be applicable for both smooth spherical particles and irregular crushed rock when considering irregular detonation structures. Soot films and pressure measurements show that as the detonation cell size is increased, reinitiation of a reanular filter until it finally no longer occurs at . Complete extinction of the combustion wave occurs at . These two limits appear to be about the same for irregular and regular detonation cell structures. For irregular structures without argon dilution, can be found for detonation wave failure, and can be found for complete extinction of the combustion wave. For argon dilution these limits are changed to and , respectively. The data are a bit scarce as a basis for proposing a new correlation for regular structures, but as a first approximation log is suggested for regular structures. The detonation or combustion wave is found to approach a constant velocity in the granular filter if not extinguished. Received 31 October 2001 / Accepted 15 July 2002 Published online 4 November 2002 Correspondence to: T. Slungaard (e-mail: slung@maskin.ntnu.no) An abridged version of this paper was presented at the 18th Int. Colloquium on the Dynamics of Explosions and Reactive Systems at Seattle, USA, from July 29 to August 3, 2001     

氢燃料缓燃向爆震转捩过程中波与火焰的匹配特性

为了解氢燃料爆震过程中压力波与火焰之间相互匹配的特性,在60mm60mm2000mm 方 爆震管内,用氢气和空气混合物进行了单爆震性能研究。在爆震转捩区内布置压力传感器与离子探针,用来 监控压力波和火焰的信号,同时利用高速摄影仪集中拍摄转捩区域。根据压力波和火焰面在爆震管不同时刻 的强度特性、速度特性及位置特性来分析爆震过程中波与火焰匹配的规律。结果表明:压力波和火焰的强度 呈现为相互正反馈匹配性质;缓燃向爆震转捩(DDT)过程中,压力波和火焰的速度表现为相互交替的变化过 程,且缓燃阶段中火焰速度的增幅大于压力波速度的增幅;当火焰面追赶上激波时,产生过爆,火焰面会临时 位于激波前面;在过爆衰减为正常爆震波的过程中,激波在火焰前面。     

Effect of an inhibitor on high-speed turbulent flames and the transition to detonation

The influence of an inhibitor (CF₃Br or Halon 1301) on the propagation of high-speed turbulent flames, quasi-detonations and the transition to detonation has been investigated for methane-air, propane-air and acetylene-air mixtures. The experiments are carried out in a 13 m tube (15 cm diameter) filled with regularly spaced orifice plates (blockage ratio of 0.39) to ensure rapid flame acceleration. In all cases, the addition of the inhibitor reduces the turbulent flame velocity and extinguishes the flame with sufficient inhibitor concentration (2.7% and 7.5% for methane-air and propane-air, respectively). For acetylene-air mixtures, the quasi-detonation speed is progressively reduced with increasing inhibitor concentration and eventually causes the failure of the quasi-detonation and transition back to a fast turbulent flame. The inhibitor also narrows the propagation limits in all cases. To elucidate the inhibition mechanism, detailed modelling of both the turbulent flame structure as well as the chemical kinetics are required.     

On the plastic zone size of solids containing doubly periodic rectangular-shaped arrays of cracks under longitudinal shear

Multiple cracks interaction plays an important role in fracture behavior of materials. A number of studies have been devoted to analytical and numerical analyses of the doubly periodic arrays of cracks. A very natural and highly accurate solution procedure is proposed to describe the interaction effect among the doubly periodic rectangular-shaped arrays of cracks. The proposed solution is implemented in the framework of continuously distributed dislocation model and singular integral equation approach. The accuracy of this solution is proved through a comparison of results from the present simulation and known closed form solutions. Further, the interaction effects among the periodic cracks on the plastic zone size and crack tip opening displacement are studied. It is found that the interaction distance among the vertical and horizontal periodic cracks is quite different.     

Onset of self-oscillations upon the loss of stability of spatially periodic two-dimensional viscous fluid flows relative to long-wave perturbations

The long-wave asymptotics of the secondary flow that arises after a steady, spatially periodic flow loses stability are studied when one of the periods tends to infinity and the rate of base flow along the longer period is equal to zero. It is shown that if certain non-degeneracy conditions are satisfied, then from the base solution a self-oscillatory regime branches off and both hard and soft stability loss is possible. For the leading terms of the asymptotics explicit formulas are obtained. Examples of self-oscillations calculated for specific flows are presented and the behavior of the fluid particle trajectories in the self-oscillatory regime branching off from the base flow is investigated.     

Detecting the position of non-linear component in periodic structures from the system responses to dual sinusoidal excitations

Based on the non-linear output frequency response functions (NOFRFs), a novel method is developed to detect the position of non-linear components in periodic structures. The detection procedure requires exciting the non-linear systems twice using two sinusoidal inputs separately. The frequencies of the two inputs are different; one frequency is twice as high as the other one. The validity of this method is demonstrated by numerical studies. Since the position of a non-linear component often corresponds to the location of defect in periodic structures, this new method is of great practical significance in fault diagnosis for mechanical and structural systems.     

Transition of mode II cracks from sub-Rayleigh to intersonic speeds in the presence of favorable heterogeneity

Understanding sub-Rayleigh-to-intersonic transition of mode II cracks is a fundamental problem in fracture mechanics with important practical implications for earthquake dynamics and seismic radiation. In the Burridge-Andrews mechanism, an intersonic daughter crack nucleates, for sufficiently high prestress, at the shear stress peak traveling with the shear wave speed in front of the main crack. We find that sub-Rayleigh-to-intersonic transition and sustained intersonic propagation occurs in a number of other models that subject developing cracks to intersonic loading fields. We consider a spontaneously expanding sub-Rayleigh crack (or main crack) which advances, along a planar interface with linear slip-weakening friction, towards a place of favorable heterogeneity, such as a preexisting subcritical crack or a small patch of higher prestress (similar behavior is expected for a small patch of lower static strength). For a range of model parameters, a secondary dynamic crack nucleates at the heterogeneity and acquires intersonic speeds due to the intersonic stress field propagating in front of the main crack. Transition to intersonic speeds occurs directly at the tip of the secondary crack, with the tip accelerating rapidly to values numerically equal to the Rayleigh wave speed and then abruptly jumping to an intersonic speed. Models with favorable heterogeneity achieve intersonic transition and propagation for much lower prestress levels than the ones implied by the Burridge-Andrews mechanism and have transition distances that depend on the position of heterogeneity. We investigate the dependence of intersonic transition and subsequent crack propagation on model parameters and discuss implications for earthquake dynamics.