Diode-end-pumped double Nd:YLF slab laser with high energy, short pulse width, and diffraction-limited quality

We have developed a novel electro-optic Q-switched diode-end-pumped solid slab laser that combines high energy, short pulse width, high repetition rates, and diffraction-limited beam quality. With two partially end-pumped Nd:YLF slabs and a 100 mm long off-axis positive branch stable-unstable oscillator, 24.2 mJ, 7.1 ns electro-optic Q-switched pulse at 1 kHz repetition rate with a beam quality of M(x)(2)=1.4 and M(y)(2)=1.3 was generated. The peak power reached 3.5 MW. Efficient external second-harmonic generation was achieved by use of lithium triborate with low peak-power intensity.     

大功率部分端面抽运混合腔板条激光器

在半导体抽运的全固态激光器中,激光晶体上的热畸变限制了激光器在大功率下输出时保持高光束质量的能力。板条结构的固体激光器具有优异的散热能力,再配合部分端面抽运以及稳一非稳柱面混合腔的使用,使大功率高光束质量的激光输出成为可能。在德国EdgeWave GmbH进行的对这一技术的合作研究中,利用不到100mm的腔长,在Nd：YVO4板条激光器上获得了110W近衍射极限的1．06μm连续激光输出,这时在非稳腔方向上的光束传播因子M^2为1．3。在稳腔方向上为1．5。通过对输出激光进行空间滤波切除腔镜造成的衍射旁瓣后,50W输出时M^2的典型值在非稳腔和稳腔方向上分别为1．09和1．2。     

The characteristics analysis of a new-style four-mirror axisymmetric-fold-combination cavity adapting to cylindrical discharge region

An axisymmetric-fold-combination (ASFC) cavity composed of two planar mirrors and spherical mirrors was designed. It is a stable-unstable resonator cavity. The light field of radial direction is Gaussian distribution. And in angular orientation, the distribution keeps invariant. It could generate annular CO₂ laser beam with excellent spatial coherence. And the spatial coherence is commendably realized with its stable-unstable cavity structure. The output light intensity distribution of this special model was discussed and simulated. With exterior lenses group, the output beams can be adjusted and controlled better to meet the manufactural requirements. Some references were provided for further research of the cavity with cylindrical discharge region.     

Coma compensation in off-axis laser resonators

Coma can introduce large linear losses in laser resonators with off-axis focusing. Compensation of coma and astigmatism is considered for a variety of resonator arrangements. It is demonstrated that it is only possible to compensate for both at a unique off-axis angle. A resonator design is proposed for eliminating coma and astigmatism.     

Diode end-pumped high-power Q-switched double Nd:YAG slab laser and its efficient near-field second-harmonic generation

We reported on an all-solid-state double Nd:YAG slab laser. The laser was based on two diode end-pumped Nd:YAG slabs and a stable-unstable hybrid resonator. A cw output of 189 W and an average Q-switched output of 169 W at 10 kHz with an M(2) factor of 1.5 in the slow direction and 1.7 in the fast direction were obtained. We demonstrated efficient near-field frequency doubling by imaging the one-dimensional top-hat near-field to a lithium triborate frequency doubler. We obtained 93 W green light at 10 kHz with a pulse width of 10.7 ns. The efficiency of second-harmonic generation was up to 57%.     

A Diode-Stack End-Pumped Electro-Optically Q-Switched Nd:YAG Slab Oscillator--Amplifier System

A laser diode-stack end-pumped electro-optically Q-switched Nd：YAG slab oscillator-amplifier system with neardiffraction-limited output is demonstrated by a stable-unstable hybrid resonator. The average power of 100 W at a repetition rate of lOkHz with a pulse width 14.7ns and average power of 76.3 W at a repetition rate of 5kHz with a pulse width of 10.2ns are measured. At the repetition rate of 10 kHz and at an output power of 89 W, the beam quality factors M^2 in the unstable and stable directions are 1.3 and 1.5, respectively.     

Circular modes selection in Yb:YAG laser using an intracavity lens with spherical aberration

The possibility of use of ordinary short-focus lenses with strong spherical aberration for mode selection in a laser resonator is demonstrated. Plano-convex spherical lenses with foci from 2.5 to 10.0 cm placed inside the resonator of the CW laser diode pumped Yb:YAG laser were used to select circular modes of Laguerre-Gauss and Bessel-Gauss type, or to get ring-like, multi-mode off-axis oscillations with variable inner and outer diameters of rings. At the constant pump power mode selection was obtained by shifting an intracavity lens along the resonator axis relative to the Yb:YAG ceramics active element of 1.1 mm thickness. Peaked and hollow multi-ring beams with output power up to 30 mW were produced. Near diffraction free (ndf) propagation of the central part (minimum or maximum) of these beams was observed along distances over 10 m from the resonator output coupler. The mechanisms of mode selection due to spherical aberration in the resonator and ndf propagation of output beams are considered. The possibility of producing radially polarized beams from the laser with an intracavity lens and possible applications of the devised laser scheme are discussed.     

Partially end-pumped Nd:YAG slab laser with a hybrid resonator

A Nd:YAG slab is partially end pumped by a diode laser stack with three diode laser bars. The pumped volume has a rectangular cross section. A hybrid resonator, which is stable in the plane of small dimension and is off-axis unstable in the plane of large dimension of the gain cross section, was used to yield highly efficient laser operation at diffraction-limited beam quality. The laser design and experimental results are reported.     

Off-axis pumping of a photonic crystal fiber laser

We present a new method for free space pumping of double-clad photonic crystal fiber lasers and amplifiers. The method is based on off-axis injection of the pump beam, exploiting the relatively high numerical aperture of the photonic crystal fiber cladding. It prevents feedback from the laser into the pump source, does not require any special treatment to the fiber, and could lead to a more compact resonator. Experimental results with the new pumping method show improved laser performance.     

Study on transient mode formation of copper vapor laser with a modified off－axis unstable resonator

Ｓｔｕｄｙ ｏｎ ｔｒａｎｓｉｅｎｔ ｍｏｄｅ ｆｏｒｍａｔｉｏｎ ｏｆ ｃｏｐｐｅｒ ｖａｐｏｒ ｌａｓｅｒ ｗｉｔｈ ａ ｍｏｄｉｆｉｅｄ ｏｆ ｆ－ａｘｉｓ ｕｎｓｔａｂｌｅ ｒｅｓｏｎａｔｏｒ￥ＨＵＡＲｅｎｚｈｏｎｇ；ＬＩＡＮＧＰｅｉｈｕｉ；...     

A stable submillimeter laser local oscillator for heterodyne radiometry and spectroscopy

A submillimeter laser with off-axis pump beam injection is described. This design concept achieves complete isolation of the pump laser with respect to the pump radiation reflected from the smm resonator. Active line independent stabilization of the pump laser is obtained by the use of an external tunable etalon as a frequency reference. The smm output power is constant to within 4% over periods of hours. Mean frequency drifts of less than 2 parts in 10⁸ per minute were measured by mixing with very high harmonics of an X-band synthesizer in a planar Schottky diode.Supported in part by NSF     

InnoSlab混合腔输出光束质量的理论研究

对InnoSlab Laser用混合腔的输出光束质量问题从热透镜效应和腔镜的不对准两个方面的影响进行理论分析,并从远场光强分布、远场发散角、光腰半径、光束质量因子M²值和桶中功率曲线等几个角度进行了讨论,特别是离轴非稳腔方向上腔镜倾斜对光束质量的影响,利用M²值和PIB曲线两个参数共同评价非稳腔的光束质量,对目前并无统一标准的非稳腔光束质量评价问题提供了有意义的参考. 关键词： InnoSlab 混合腔 光束质量 桶中功率     

Laser resonator with ultrabroad longitudinal mode spacing

A novel type of laser resonator is proposed, in which the resonator length changes with the wavelength of the laser generation. This results in longitudinal mode spacing three orders of magnitude broader than that of conventional cavities. An elementary analysis of the laser resonator is presented and some features and possible applications are discussed.     

Beam parameters,mode structure and diffraction losses of slab lasers with unstable resonators

The properties of unstable resonators in on-axis and off-axis geometry were investigated both theoretically and experimentally. Diffraction loss, mode structure, beam quality and misalignment sensitivity were measured in single-shot operation with a gas-cooled Nd: YAG slab laser (4×12×100 mm³) and compared with theoretical results obtained by solving the Fresnel integral equation numerically. The excellent agreement allowed detailed resonator optimization. Furthermore, the resonator performance in high-power operation was investigated with two water-cooled Nd: YAG slab lasers (6×25×163 mm³ and 7×26×191 mm³) capable of 670 W of output power. Beam quality near the diffraction limit and a maximum output power of 475 W was achieved with an on-axis unstable resonator with variable-reflectivity mirror.     

Observation of spectral modulation coupled with broadband transverse-mode-locking in an Yb:CALGO frequency-degenerate cavity

A frequency-degenerate cavity(FDC) is the resonator that the ratio of transverse and longitudinal mode frequency spacings is a simple rational number. When an optical resonator is close to the FDC, transverse-mode-locking(TML) takes place with drastic changes of laser mode. We report for the first time, to the best of our knowledge,the multi-frequency emission and spectral modulation effects coupled with TML in FDC. The Yb:CaGdAlO_4(Yb:CALGO) crystal with large gain bandwidth was used as a gain medium in an off-axis-pumped hemispherical FDC for realizing broadband emission. Interestingly, the spectrum can transform from a single smooth packet shape to a multi-peak structure; meanwhile, the transverse pattern accordingly transforms into some exotic wave-packet profiles through controlling off-axis displacement in a special degenerate state.     

High-power CO(2) laser with a Gauss-core resonator for high-speed cutting of thin metal sheets

A novel resonator, the Gauss-core resonator, based on a stable resonator configuration designed to yield a highly focusing beam operating in a large-volume TEM(00) mode, is presented. A 6.2 kW linearly polarized output beam with an M(2) factor of 1.7 is obtained experimentally for a high-power cw CO(2) laser. The capability of the Gauss-core resonator to process laser materials is also studied. We can cut 1-mm-thick mild (soft) steel with a maximum cutting speed of 58 m/min at 5.6 kW and 0.2-mm-thick steel 145 m/min at 2.8 kW.     

A novel cw optically pumped submillimeter laser

Laser operation has been achieved in an optically pumped submillimetre laser that employs a novel cw resonator design which separates the pumping optics from the resonator optics by the use of a Brewster window. This design also allows pumping by an unfocused CO₂ laser beam. The preliminary performance characteristics of the laser are presented.     

Numerical investigation of beam quality in unstable optical resonators and the effects of practical imperfections

Field characteristics and beam quality of confocal positive branch unstable resonator under some practical imperfections has been investigated. Based on Fresnel-Kirchhoff integral, the near and far field intensity of the resonator was calculated numerically. Using the second order moment method, the beam quality factor, M² of the resonator was also calculated. Variety of practical distorting affects, mainly misalignment, off-axis, and thermal deflection of the mirrors, as well as gain non-uniformity were considered in these calculations. The results show that the beam quality factor is more sensitive to the off-axis and misalignment distortions while the non-uniform gain has significant effect only for unusual conditions. The effects of geometrical parameters, i.e. Fresnel number as well as magnification factor on the beam quality were also investigated.     

High energy and high stability Cr:YAG passively Q-switched laser with convex-ARR unstable resonator

A convex-ARR (Anti-resonant Ring) unstable resonator was introduced in a Cr⁴⁺:YAG passively Q-switched Nd:YAG pulsed laser. There are two novel features in this cavity, one is the unstable resonator increasing output energy and improving laser mode; the other is the ARR structure efficiently enhancing the laser stability. A high energy and high stability Q-switched pulse with a single pulse energy of 85.6 mJ, a pulse width of 38 ns and an energy stability of 99.6% was obtained. The experimental results were analyzed well by using the mechanism of transient grating and the properties of the unstable resonator.     

100 W Kinetically enhanced copper vapor laser at 10 kHz repetition-rate, high (∼1.5%) efficiency with low (∼1.6 kW/l) specific input power and performance of new resonator configurations

It is established here that kinetically enhanced copper vapor lasers (KE-CVLs) based on large-bore discharge tubes can provide high (>1.4%) efficiency at ∼9-10 kHz rep-rate with very low (<2 kW/l) specific input power. Comparative performance of various large-bore kinetically enhanced copper vapor lasers in the range 45-70 mm is presented for most suitable discharge tube. Maximum output power of ∼100 W was achieved with efficiency of about 1.55% at 10 kHz rep-rate from the 60 mm bore KE-CVL. The pulse to pulse efficiency of the KE-CVL was ∼2%, tube efficiency ∼2.1%, and laser pulse energy was about ∼10 mJ. These results show significant advancement in the laser system as an elemental high temperature CVL due to volumetric scaling and KE-effects combined with very low specific input power of ∼1.65 kW/l as compared to 8-9 kW/l normally required in other kinetically enhanced copper vapor lasers to generate ∼100 W output power. Performance of the KE-CVL with 3 new cavity configurations namely, (1) CAT-EYE resonator (2) hybrid resonator, and (3) modified diffraction coupled resonator with dot mirrors are presented for the first here. CAT-EYE resonator was demonstrated to achieve high misalignment tolerance without significant loss of power. A typical drift in power of ∼5% was observed with misalignment responsible for 40% decline in power in case of standard plane-plane cavity. Effect of resonator misalignment on amplifier output drift was also investigated using CAT-EYE resonator in oscillator-amplifier configuration. In case of using stable-unstable hybrid resonator, high magnification of M ∼ 1500 was realized resulting in extremely low divergence (∼0.08 mrad) beam with modest (∼20%) loss in average power. In case of modified DCR cavity, record power of about 48 W was achieved with beam divergence of about 0.1 mrad on using intra-cavity 2 × 2 array of 4 dot mirrors.