Influence of gamma radiation on the colour strength and fastness properties of fabric using turmeric (Curcuma longa L.) as natural dye

The effect of gamma radiation on the dyeing of cotton with extract of turmeric (Curcuma longa L.) powder has been investigated. Cotton fabric and turmeric powder were irradiated to absorbed doses of 1, 2, 3, 4 and 6 kGy using Co-60 gamma irradiator. Dyeing parameters such as temperature, pH and mordant concentration were optimized. Dyeing was performed using un-irradiated and irradiated cotton with the extracts of un-irradiated and irradiated turmeric powder in order to investigate the effect of radiation treatment on the colour strength of dyed fabric. The reported data of un-irradiated and irradiated fabrics dyed with un-irradiated and irradiated dyes were obtained using the spectraflash SF-650. The colourfastness to light, rubbing- and washing-fastness properties showed that gamma irradiation has improved the dyeing characteristics from fair to good.     

Improvement of colour strength and colourfastness properties of gamma irradiated cotton using reactive black-5

The dyeing behaviour of gamma irradiated cotton fabric using Reactive Black-5 dye powder has been investigated. The mercerized, bleached and plain weaved cotton fabric was irradiated to different absorbed doses of 100, 200, 300, 400, 500 and 600 Gy using Co-60 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature of dyeing, time of dyeing and pH of dyeing solutions were optimised. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organisation (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It is found that gamma irradiated cotton dyed with Reactive Black-5 has not only improved the colour strength but also enhanced the rating of fastness properties.     

Effect of mercerization and gamma irradiation on the dyeing behaviour of cotton using stilbene based direct dye

The dyeing behaviour of mercerized and gamma irradiated cotton fabric using stilbene based direct dye has been investigated. The fabric was treated with different concentrations of alkali to optimize the mercerization. The optimum mercerized cotton fabric was irradiated to absorbed doses of 2, 4, 6, 8 and 10 kGy using Cs-137 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature, time of dyeing, pH of dyeing solutions and salt concentration were optimized. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organization (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It was found that mercerized and irradiated cotton have not only improved the colour strength but enhanced the rating of fastness properties also.     

Eco-dyeing using Tamarindus indica L. seed coat tannin as a natural mordant for textiles with antibacterial activity

Tamarind seed coat tannin was extracted and its tannin class was determined. The extracted tannin was employed as a natural mordant alone and in combination with metal mordant namely copper sulphate for cotton, wool and silk fabrics and dyed using natural dyes namely turmeric and pomegranate rind. The colour strength, colour coordinates, wash and light fastness were evaluated and compared for all the three fabrics with and without mordanting. The pre-mordanted fabrics on dyeing gave better colour strength, wash and light fastness than those dyeing obtained without mordanting. The total phenolic content of the extract was calculated and minimum inhibition concentration was 1% against both the Staphylococcus aureus and Escherichia coli bacteria. The mordanted and dyed fabrics resulted in good antibacterial activity up to 20 washes, when natural mordant was used along with 0.5% and 1% copper sulphate mordant and dyed with natural dyes.     

High efficiency ultra-deep dyeing of cotton via mercerization and cationization

A potentially environmentally responsible dyeing procedure for ultra-deep shades on cotton was developed using a cationization method in combination with mercerization. The effects of both treatments on dyeing performance and colorfastness properties of cotton fabrics dyed with reactive dyes were analyzed individually and in combination. Both mercerization and cationization have been proved to be effective in increasing the depth of shade on cotton. The colorfastness properties, except colorfastness to wet crocking, of mercerized–cationized cotton fabrics dyed without salt were much better than untreated cotton dyed using a conventional dyeing procedure. Unlike untreated cotton fabrics, the concentration of Na₂CO₃ in the dyeing process of mercerized–cationized cotton fabrics was lowered from 20 to 5 g/L without compromising dye fixation and colorfastness properties. With low concentrations of dyes and Na₂CO₃ and no electrolyte in the dye bath effluent, the dyeing procedure of mercerized–cationized cotton fabrics for ultra-deep shades is potentially a more environmentally benign method than conventional dyeing with reactive dyes.     

Dyeing of multiple types of fabrics with a single reactive azo disperse dye

Three novel reactive azo disperse dyes were prepared using 7-acetamide-4-hydroxy-2-naphthalene sodium sulphate as the precursor. The structure of the dyes has the combined characteristics of reactive, disperse, and cationic dyes. Under alkaline conditions (pH 9), the dyes can be applied to cotton, silk, wool, and nylon. Under neutral conditions, they can be used to dye polyester. Under acidic conditions (pH 4.5), they can colour acrylic fabric after conversion of the tertiary amine group to the quaternary ammonium cation. The colour-fastness of the dyed fabrics were also evaluated.     

Synthesis of 2-Azobenzo[b]thiophene Derivatives and Their Application on Nylon Fibre

A series of novel monoazo disperse dyes derived from the coupling of diazotized 2-aminobenzo[b]thiophene derivatives with N-arylmaleimides is described. The monoazo disperse dyes applied to nylon fabric and their dyeing performance has been assessed. These dyes have been found to give light yellow to reddish pink color shades with very good depth and levelness on nylon fabric. The dyed fabric shows moderate light fastness and excellent washing, rubbing, perspiration, and sublimation fastness. The percentage dyebath exhaustion on nylon fabric has been found to be good and acceptable.     

Synthesis and Evaluation of Technical Properties of Novel Cationic Mono‐s‐chloro Triazinyl (MCT) Reactive Dyes on Cotton

Two novel cationic mono‐s‐chloro triazinyl (MCT) reactive dyes together with their analogues were synthesized via reacting an N,N‐dimethyl dodecylamine with p‐nitrobenzyl bromide. The resultant was reduced using stannous chloride and hydrochloric acid to produce the primary amine. The quaternary ammonium salt containing primary amine was then diazotized and coupled to H‐acid/J‐acid reacted with cyanuric chloride and sulfanilic acid. The analogue dyes were prepared via the same route without quaternary ammonium salt making stage. The dyes were characterized using FTIR, ¹H NMR, UV‐Vis spectroscopy and elemental analysis. The substantivity, exhaustion and fixation of the dyes were investigated on cotton fabric. It was found that these functional dyes could be effectively introduced to cotton for achieving simultaneous coloration and functional finishing effects. All the dyed fabrics exhibited softening efficacy. The washing and light fastness of the dyed samples were further studied.     

Natural Dyeing of Modified Cotton Fabric with Cochineal Dye

Natural dyes are not harmful to the environment owing to their biodegradability. For dye application to textiles, salts are necessary as mordant or electrolytes and make an environmental impact. In this paper, the influence of cationization during mercerization to the dyeing of cotton fabric with natural dye from Dactylopius coccus was researched. For this purpose, bleached cotton fabric as well as fabric cationized with Rewin OS was pre-mordanted using iron(II) sulfate heptahydrate (FeSO₄·7H₂O) and dyed with natural cochineal dye with and without electrolyte addition. For the characterization of surface changes after cationization, an electrokinetic analysis on SurPASS was performed and compared to pre-mordanting. For determination of dye exhaustion, the analysis of dye solution was performed on a UV/VIS spectrophotometer Cary 50 Solascreen. Spectrophotometric analysis was performed using a Datacolor 850 spectrophotometer, measuring remission ”until tolerance” and the whiteness degree, color parameters, color depth (K/S), and colorfastness of dyed fabric were calculated. Levelness was determined by visual assessment. Cationized cotton fabrics showed better absorption and colorfastness. Pre-mordanting and cationization showed synergism. The electrolytes improved the process of dye absorption. However, when natural dyeing was performed on cotton fabric cationized during mercerization, similar chromacity, uniform color, and colorfastness were achieved with and without electrolyte, resulting in pure purple hue of cochineal. For achieving a violet hue, pre-mordanting with Fe-salt was needed. Therefore, salt can be reduced or even unnecessary, which makes this process of natural dyeing more environmentally friendly.     

Influence of Cotton Pre-Treatment on Dyeing with Onion and Pomegranate Peel Extracts

In this paper the possibility of applying natural dyes on cellulose fibres were researched with respect to the impact of cotton material pre-treatment (scouring, chemical bleaching, mercerization and mordanting), using renewable sources of natural dyes (waste as a source). As mordants, metal salts of copper, aluminium and ferrum were used, and the influence on colour change as well as on fastness properties were analysed. The natural dyes were extracted from onion peel (Allium cepa L.) and pomegranate peel (Punica granatum L.). In spectrophotometric analysis performed of the plant extracts, the onion extract has peaks at 400 and 500 nm, resulting in red-orange colourations and the pomegranate extract shows a maximum at 400 nm, i.e., in the yellow region, which is characteristic of punicalin. Results show significant influence of cotton pre-treatments on colour appearance and fastness properties, caused by pre-treatments affecting the properties and structure of the cotton itself. The positive effect of mercerization on dye absorption and bonding is confirmed. For wash and light fastness properties, more satisfactory results have been obtained for yarns dyed with pomegranate peel natural dye, and the key importance of mordants for fastness properties has been confirmed.     

Chemical cationization of cotton fabric for improved dye uptake

Cotton fabric is usually dyed with reactive dyes. During the dyeing process, a large amount of salt is required to achieve higher exhaustion of the dye from the dyebath onto the fiber. Dyeing of cotton with reactive dyes has a substantial environmental impact due to the discharge of a large volume of highly colored and saline effluents. Chemical cationization allows cotton fibers to be dyed without salt by chemically modifying cellulosic macromolecules to introduce positively charged sites. In this study, cotton fabric was cationized using (3-chloro-2-hydroxylpropyl) trimethyl-ammonium chloride (CHPTAC). Dye uptake was assessed using two reactive dyes, CI Reactive Blue 235 and CI Reactive Blue 19. Dye exhaustion kinetics were determined using a Datacolor-HueMetrix Monitor system. Analysis of variance demonstrated significant effects of CHPTAC concentration and exhaustion time on the percent exhaustion. Color strength at the end of the dyeing cycle was significantly higher for cationized fabrics compared to the control fabric. This work shows that treatment of cotton with CHPTAC enhanced dye uptake properties due to the introduction of cationic sites and resulted in superior dyeing without the addition of salt.     

Enhanced Photocatalytic Degradation of Synthetic Dyes and Industrial Dye Wastewater by Hydrothermally Synthesized G–CuO–Co<Subscript>3</Subscript>O<Subscript>4</Subscript> Hybrid Nanocomposites Under Visible Light Irradiation

To enhance the degradation of colour and chemical oxygen demand using photocatalytic activity, Graphene–CuO–Co₃O₄ hybrid nanocomposites were synthesized using an in situ surfactant free facile hydrothermal method. The photocatalytic degradation of synthetic anionic dyes, methyl orange (MO) and Congo red (CR), and industrial textile wastewater dyes under visible light irradiation was evaluated. The synthesized nanocomposite was characterized structurally and morphologically using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, high-resolution transmission electron microscope, and Fourier transform infrared spectroscopy. Evaluation of the colour indicated complete removal at 15 min of irradiation for the MO and CR dyes, with 99% degradation efficiency. The reaction time for the primary effluent wastewater dye was 60 min for 81% dye removal. In contrast, a longer reaction time was required to meet the national discharge regulation for the raw wastewater dye, 300 min for 60% dye removal. The mechanism for dye degradation using the Graphene–CuO–Co₃O₄ hybrid nanocomposite was elucidated using the Langmuir–Hinshelwood model, and the rate constant and half-life of the degradation process were calculated. The results demonstrate that photocatalytic degradation using a hybrid nanocomposite and visible light irradiation is a sustainable alternative technology for removing colour from wastewater dye.     

Synthesis and dyeing performance of some novel thiazole azo disperse dyes

The synthesis of some novel monoazo disperse dyes derived from 5-acetyl-2-amino-4-methylthiazole using various N-alkyl derivatives of aniline and their dyeing performance as disperse dyes have been assessed on cellulose triacetate fabric. The spectral properties of these dyes were also measured. The dyed fabric show good light fastness, very good rubbing, perspiration, washing fastness and excellent sublimation fastness. These dyes have been found to give bright yellow to maroon color shade with very good depth and levelness on fabric. The dyebath exhaustion and fixation on fabric has been found to be very good.     

Effect of selected natural dyes in reduction on colour changes of Egyptian linen textiles by fungi

Linen is the most historical Egyptian textile fibre liable to fungal deterioration. Fungal deterioration of dyed linen textiles may appear as undesirable different stains. In order to success in removing of fungal stains from biodeteriorated historical Egyptian dyed linen textiles, it is necessary to understand the nature and causes of these stains, hence their subsequent removal. So this paper aims to investigate the effect of fungi on dyed linen textiles. In this study linen textile samples were experimentally dyed by two different dyes, blue one as an example to vat dye and yellow one as an example to direct dye. This work is done on two of the most important dyes (Turmeric and indigo), which were popular in most of historical periods in Egypt. Dyed linen samples were experimentally biodegraded by thirty different fungal strains isolated previously from historical Egyptian linen samples. The produced change in colours of the biodeteriorated samples was detected visually. Also, the change in reflection spectra and colour differences produced to dyed linen textiles after fungal deterioration, were assessed and evaluated by using spectrophotometer. This study reported that most of tested fungi contribute to discoloration of all tested dyed linen samples. These results indicate that most of stains on historical Egyptian dyed linen textiles, may be fungal stains. The results confirm that undyed linen textiles more liable to fungal biodeterioration than dyed ones. Also the results show that yellow dyed linen textiles are more susceptible to fungal deterioration than blue dyed linen textiles. The obtained results show that Alternaria tenuissima, Chaetomium globosum, Chaetomium sp., Penicillium raistrickii, P. soppi, P. asperum, P. citrinum, Aspergillus carbonarius, A. fischeri, A. nidulans, A. terreus and A. niger, had showed the maximum colour changes of the deteriorated yellow dyed linen samples. The results also show that Alternaria tenuissima, Chaetomium sp., Penicillium asperum, P. citrinum, Aspergillus nidulans and A. spinulosus, had shown the maximum colour changes of the deteriorated blue dyed linen samples.     

Effect of UV radiation on the dyeing of cotton fabric with reactive blue 13

For the present study, the cotton fabric and dye solution were irradiated to UV radiation for different times. Dyeing was performed using un-irradiated and irradiated cotton with un-irradiated and irradiated reactive blue dye. Different dyeing parameters such as temperature, pH and time were optimized using irradiated dye and irradiated cotton. The data of colour report were obtained from un-irradiated and irradiated cotton dyed with reactive blue dye using spectra flash (SF650). Colourfastness properties show that UV radiation of both cotton and dye powder has improved the grading of fastness from fair to good. It is found that UV irradiation has not only enhanced the strength of dye on irradiated fabric but also improved the dyeing properties.     

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

ABSTRACT: BACKGROUND: For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever. This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. RESULTS: On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. CONCLUSIONS: The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments.     

Synthesis of Novel Azo Dyes Containing the Thiophene Moiety

A series of disperse dyes have been synthesized by diazotation of 2-aminothiophene derivative and coupling with various N-arylmaleimides. The dyes were characterized by IR spectral studies, visible absorption spectra, and elemental analysis. The dyeing performance of these dyes was assessed on nylon fabric. These dyes were found to give yellowish brown to reddish violet shades on dyeing with very good depth, levelness, and brightness on fabric. The percentage dyebath exhaustion and fixation on fabric was found to be very good. The dyed fabric showed poor light fastness and good to excellent fastness to washing, rubbing, perspiration, and sublimation.     

A study on multifunctional protein fibre with UV protection,moth repellency and antibacterial properties using ESIPT core containing benzimidazole and benzothiazole based functional acid azo dyes

Water soluble fluorescent acid azo dyes with benzimidazole and benzothiazole component having excited state intramolecular proton transfer (ESIPT) core were synthesised by diazo coupling. The structure of the dyes were analysed and confirmed by Fourier Transform Infrared – spectroscopy (FT-IR), elemental analysis, ¹H NMR and ¹³C NMR analysis. Absorption and emission characteristics of the dyes were studied in different polarity solvents shown bathochromic (red) shift as solvent polarity increases. Wool and silk fabric dyed with synthesised dyes displayed high exhaustion, uniform dyeing and good wet fastness properties. The dyed substrate showed green and purple fluorescence under UV light (366 ​nm) along with UV protection. Dyed wool fabric was also assessed for antibacterial activity by calculation of bacterial reduction Staphylococcus Auerus (Gram positive), Klebsiella Pneumonia (Gram negative) bacteria. The dyed wool were also examined for the resistivity against insect pests Anthrenus Flavipies (Le Conte) by calculation of the fabric weight loss, Mortality of moth and visible assessment of fabric attacked by moth after 14 days in given conditions. Consequently, it was demonstrated that wool fabric dyed with Benzimidazole and benzothiazole based acid dyes had various functionalities, such as UV protection, antibacterial activity and mild moth repellency.     

杂环-双氰乙基系列分散染料的合成、表征及染色性能

以4个杂环芳香胺为重氮组分, 3个N,N-二氰乙基芳香胺为偶合组分, 经重氮化、 偶合反应合成了12个杂环-双氰乙基系列偶氮物; 采用紫外-可见吸收光谱、 红外光谱及核磁共振氢谱等对其结构进行了表征; 还考察了它们在涤纶织物、 乙酰化杉改性木粉和氰乙基化改性木粉上的染色性能. 结果表明, 12个偶氮物为目标产物, 在N,N-二甲基甲酰胺(DMF)中的最大可见吸收波长为417～621 nm, 摩尔吸光系数均大于10⁴. 这些化合物染色涤纶织物的色光分属黄色、 红色、 紫红色和蓝色系列, 并具有高水洗牢度和高日晒牢度; 染色乙酰化木粉和氰乙基木粉的色光和水洗牢度与染色涤纶织物相近. 这12个分散染料具有色谱范围广、 色泽鲜艳、 高发色强度和高牢度等特点, 可用于多种纤维的染色.     

Dyeing behaviour of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves (Lawsonia inermis)

Dyeing behavior of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves has been investigated. Cotton and dye powder are irradiated to different absorbed doses of 2, 4, 6, 8 and 10 kGy using Cs-137 gamma irradiator. The dyeing parameters such as dyeing time, electrolyte (salt) concentration and mordant concentrations using copper and iron as mordants are optimized. Dyeing is performed using un-irradiated and irradiated cotton with dye solutions and their color strength values are evaluated in CIE Lab system using Spectraflash –SF650. Methods suggested by International Standard Organization (ISO) have been employed to investigate the colourfastness properties such as colourfastness to light, washing and rubbing of irradiated dyed fabric. It is found that gamma ray treatment of cotton dyed with extracts of henna leaves has significantly improved the color strength as well as enhanced the rating of fastness properties.