Aging investigation of cobalt ferrite nanoparticles in low pH magnetic fluid

In this study, we report on how surface-passivated and nonpassivated cobalt ferrite nanoparticles (8 nm diameter), suspended as ionic magnetic fluids and aged under low pH conditions, revealed different behavior as far as the time evolution of the iron/cobalt cation distribution, crystal quality, coercivity, and saturation magnetization are concerned. Different techniques were used to perform a detailed study regarding the chemical stability, structural stability, and surface and magnetic properties of the suspended nanoparticles as a function of the aging time. Properties of surface-passivated and nonpassivated nanoparticles were investigated by transmission electron microscopy, X-ray diffraction, atomic absorption spectrometry, magnetic measurements, Raman spectroscopy, and M?ssbauer spectroscopy. Our data showed that the employed nanoparticle surface passivation process, besides the formation of an iron-rich surface layer, modifies the nanoparticle core as well, improving the crystal quality while modifying the Fe/Co cation distribution and the nanoparticle dissolution rate profile. Magnetic data showed that the saturation magnetization increases for surface-passivated nanoparticles in comparison to the nonpassivated ones, though coercivity decreases after passivation. These two observations were associated to changes in the cation distribution among the available tetrahedral and octahedral sites.     

Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals

By combining nonhydrolytic reaction with seed-mediated growth, high-quality and monodisperse spinel cobalt ferrite, CoFe(2)O(4), nanocrystals can be synthesized with a highly controllable shape of nearly spherical or almost perfectly cubic. The shape of the nanocrystals can also be reversibly interchanged between spherical and cubic morphology through controlling nanocrystal growth rate. Furthermore, the magnetic studies show that the blocking temperature, saturation, and remanent magnetization of nanocrystals are solely determined by the size regardless the spherical or cubic shape. However, the shape of the nanocrystals is a dominating factor for the coercivity of nanocrystals due to the effect of surface anisotropy. Such magnetic nanocrystals with distinct shapes possess tremendous potentials in fundamental understanding of magnetism and in technological applications of magnetic nanocrystals for high-density information storage.     

Synthesis and coating of cobalt ferrite nanoparticles: a first step toward the obtainment of new magnetic nanocarriers

Monodisperse and stable cobalt ferrite (CoFe2O4) nanoparticles (5.4 nm) have been produced, coated with mono- and difunctional phosphonic and hydroxamic acids, and fully characterized (using thermogravimetric analysis (TGA), dynamic light scattering (DLS), IR spectroscopy, transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) measurements). Cobalt leakage of the coated nanoparticles has been also studied. Magnetic measurements show the possible applications in hyperthermia at low frequencies, and for this reason, water-soluble coated CoFe2O4 can be seen as a first step toward the obtainment of novel systems for biomagnetic applications.     

Study on synthesis of superparamagnetic spinel cobalt ferrite nanoparticles as layered double hydroxides by co-precipitation method

Cobalt ferrite layered double hydroxide (LDH) nanoparticles with cubic structure were synthesized by the co-precipitation method: addition of NaOH solution to a solution of Co²⁺ and Fe³⁺. Formation of nanoparticles was confirmed by XRD, SEM, TEM, PSA, FT-IR, TGA, DSC, and magnetic characteristics were measured using VSM. Crystals produced by calcination at 900°C possessed high coercivity and pronounced physical and chemical stability. Nanoparticles of CoFe₂O₄ formed outer layers with poor crystallization on the surface of cobalt ferrite nanocrystals.     

Synthesis of cobalt nickel ferrite nanoparticles via autocatalytic decomposition of the precursor

The chemistry, structure, and properties of spinel ferrites are largely governed by the method of preparation. The metal carboxylato-hydrazinate precursors are known to yield nanosized oxides at a comparatively lower temperature. In this study, we are reporting the synthesis of one such precursor, cobalt nickel ferrous fumarato-hydrazinate which decomposes autocatalytically to give cobalt nickel ferrite nanoparticles. The XRD study of this decomposed product confirms the formation of single-phase spinel, i.e., Co_0.5Ni_0.5Fe₂O₄. The thermal decomposition of the precursor has been studied by isothermal, thermogravimetric (TG), and differential scanning calorimetric (DSC) analysis. The precursor has also been characterized by FTIR, EDX, and chemical analysis, and its chemical composition has been determined as Co_0.5Ni_0.5Fe₂(C₄H₂O₄)₃·6N₂H₄.     

Vanadium supported on spinel cobalt ferrite nanoparticles as an efficient and magnetically recoverable catalyst for oxidative degradation of methylene blue

Vanadium supported on spinel cobalt ferrite nanoparticles was synthesized and characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray analysis and transmission electron microscopy. For the first time, the prepared material was used for the catalytic degradation of methylene blue as an organic dye in the presence of hydrogen peroxide as a green oxidant and NaHCO₃ as a co‐reagent at room temperature. The dependency of removal percentage on various parameters such as amount of catalyst, pH, reaction time and temperature and the effect of radical scavenging agents were studied. Finally, recoverability and reusability of the vanadium supported on spinel cobalt ferrite nanoparticles were investigated.     

Synthesis of magnetic nickel spinel ferrite nanospheres by a reverse emulsion-assisted hydrothermal process

Nickel ferrite nanospheres were successfully synthesized by a reverse emulsion-assisted hydrothermal method. The reverse emulsion was composed of water, cetyltrimethyl ammonium bromide, polyoxyethylene(10)nonyl phenyl ether, iso-amyl alcohol and hexane. During the hydrothermal process, β-FeO(OH) and Ni_0.75Fe_0.25(CO₃)_0.125(OH)₂·0.38H₂O (INCHH) nanorods formed first and then transformed into nickel spinel ferrite nanospheres. The phase transformation mechanism is proposed based on the results of X-ray powder diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy, etc. Nickel ferrite may form at the end of the INCHH nanorods or from the solution accompanied by the dissolution of β-FeO(OH) and INCHH nanorods. The X-ray photoelectron spectroscopy analysis shows that a few Fe³⁺ ions have been reduced to Fe²⁺ ions during the formation of nickel ferrite. The maximum magnetization of the nickel ferrite nanospheres obtained after hydrothermal reaction for 30 h is 55.01 emu/g, which is close to that of bulk NiFe₂O₄.     

Nanocrystalline spinel zinc-substituted cobalt ferrite thick film an efficient ethanol sensor

This study considered Zn-substituted cobalt ferrite (Zn_xCo_1-xFe₂O₄ (x = 0.0–1.0) (ZCF)) thick films structural, morphological, and electrical properties; and gas sensing performance. The ZCF thick film sensor was screen printed on a glass substrate and tested for different analyte gases, including H₂, H₂S, CO₂, Cl₂, NH₃, LPG, and C₂H₅OH. We used X-ray photoelectron spectrometry to investigate composition, chemical state, iron/cobalt or zinc ratio, and cation distribution within Zn-substituted cobalt spinel ferrite tetrahedral and octahedral sites without impurities. FESEM and HR-TEM confirmed grain dimensions between 0.13 and 0.23 μm and porous, nearly spherical to flake-like morphology for the ZCF samples. Sample DC resistivity reduced with increasing temperature, confirming semiconductor nature. Thick film ZCF composition achieved highest the gas response and selectivity to 100 ppm ethanol at room temperature (30 °C). Overall results confirmed that flake-like ZCF sensors could be effective ethanol gas sensors.     

Facile polyol synthesis of ultrasmall water-soluble cobalt ferrite nanoparticles

A facile protocol to prepare ultrasmall citrate-coated cobalt ferrite NPs was proposed from the comparison between one-step and two-step chemical routes based on the polyol method. Infrared spectroscopy, thermogravimetry and zeta potential data indicated different coordinations of citrate groups affecting the NP colloidal stability. The magnetic core size and saturation magnetization were also affected. The surface-modified NPs prepared by the one-step route presented superior colloidal stability, low core (2.9 nm) and hydrodynamic (4.8 nm) sizes, high magnetization (45 emu/g), and can be considered suitable platforms to produce nanoparticle-biomolecule conjugates.     

Synthesis and electrochemical performanceof cobalt disulfide

The anode material cobalt disulfide for lithium-ion batteries was synthesized using the hydrothermal method at a lower temperature. The microstructure and surface morphology of the powders were characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Electrochemical tests showed that this sample had superior electrochemical properties. The first discharge capacity is up to 1313.9 mAh/g in the voltage range of 3.00–0.02 V at a current density of 50 mA/g. Adjusting the voltage range to 3.00–0.50 V, the first discharge capacity decreases, but the 20th discharge capacity is 435.5 mAh/g, which is better than what has been reported in the literature.     

Synthesis of magnetic nanoparticles and their application to bioassays

Magnetic nanoparticles have been attracting much interest as a labeling material in the fields of advanced biological and medical applications such as drug delivery, magnetic resonance imaging, and array-based assaying. In this review, synthesis of iron oxide magnetic nanoparticles via a reverse micelle system and modification of their surface by an organosilane agent are discussed. Furthermore, as a practical biological assay system, the magnetic detection of biomolecular interactions is demonstrated by using the combination of a patterned substrate modified with a self-assembled monolayer and the magnetic nanoparticles.     

Synthesis, surface modifications, and size-sorting of mixed nickel-zinc ferrite colloidal magnetic nanoparticles

We report on the spontaneous covalent growth of monomolecular adlayers on mixed nickel-zinc nanoferrite colloidal suspensions (ferrofluids). Synthesized nanoparticles were subjected to surface modification by means of acid chloride chemistry, leading to the formation of covalent bonds between the hydroxy groups at the nanoparticle surface and the acid chloride molecules. This procedure can be easily tailored to allow for the formation of adlayers containing both hydrophobic and hydrophilic regions stacked at predetermined distances from the magnetic core, and also providing the nanoferrites with functional carboxy groups capable of further modifications with, for example, drug molecules. Here, fluorophore aminopyrene molecules were bound to such modified nanoferrites through amide bonds. We also used the same chemistry to modify the surface with covalently bound long-chain palmitoyl moieties, and for comparison we also modified the nanoferrite surface by simple adsorption of oleic acid. Both procedures made the surface highly hydrophobic. These hydrophobic colloids were subsequently spread on an aqueous surface to form Langmuir monolayers with different characteristics. Moreover, since uniformity of size is crucial in a number of applications, we propose an efficient way of sorting the magnetic nanoparticles by size in their colloidal suspension. The suspension is centrifuged at increasing rotational speed and the fractions are collected after each run. The mean size of nanoferrite in each fraction was measured by the powder X-ray diffraction (PXRD) technique.     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.     

Thermal, structural, magnetic and photoluminescence studies on cobalt ferrite nanoparticles obtained by citrate precursor method

Magnetic nanoparticles of cobalt ferrite have been synthesized by citrate precursor method. TG-DSC studies have been made to get the idea of the optimum temperature of annealing that could lead to the formation of nanoparticles. Annealing the citrate precursor was done at 450, 650, and 973?°C. The X-ray diffraction (XRD) studies and the scanning electron microscopy (SEM) have been used for characterization. The data from vibrating sample magnetometer and photoluminescence spectrometer (PL) have been analyzed for exploring their applications. Using the Scherrer formula, the crystallite size was found to be 25, 32, and 43?nm, respectively, using the three temperatures. The particle size increased with annealing temperature. Rietveld refinements on the X-ray (XRD) data were done on the cobalt ferrite nanoparticles (monoclinic cells) obtained on annealing at 650?°C, selecting the space group P2/M. The values of coercivity (1574.4?G) and retentivity (18.705?emu g^?1) were found out in the sample annealed at 650?°C while magnetization (39.032?emu g^?1) was also found in the sample annealed at 973?°C. The photoluminescence (PL) property of these samples were studied using 225, 330, and 350?nm excitation wavelength radiation source. The PL intensity was found to be increasing with the particle size.     

AHOT/异辛烷反胶束体系制备铁酸钴纳米粒子

分别以阴离子表面活性剂二(2-乙基己基)丁二酸酯磺酸钠(AOT)和新型表面活性剂二(2-乙基己基)羟基丁二酸酯磺酸钠(AHOT)与异辛烷/水构建的反胶束体系为微反应器,合成了CoFe2O4纳米粒子;利用TGA,XRD,TEM等手段对产物进行了表征;讨论了两种表面活性剂构建的反胶束体系对产物合成过程及纳米粒子形貌和尺寸的影响.     

Synthesis of MPTS-modified cobalt ferrite nanoparticles and their adsorption properties in relation to Au(III)

Cobalt ferrite magnetic nanoparticles (Co-MNP) were prepared by a co-precipitation method and subsequently coated with (3-mercaptopropyl)trimethoxysilane (MPTS) for the extraction and recovery of Au(III) from aqueous chloride solutions. Physical characterization of the MPTS-modified particles (Co-MPTS) was performed using FT-IR, TGA, and SEM. Results from FT-IR confirmed that MPTS was present on the surface of the magnetic nanoparticles. The amount of MPTS was 0.36 mmol g⁻¹ of Co-MPTS, obtained by elemental analysis. SEM images revealed aggregates composed of nanocrystalline Co-MPTS particles. The extraction efficiency as a function of the pH, contact time, and initial Au(III) concentration was evaluated. The modified particles showed maximum adsorption in the pH range from 1.0 to 4.0. The adsorption behavior of Co-MPTS toward Au(III) followed a Langmuir isotherm and the maximum adsorption capacity was found to be 120.5 mg g⁻¹. The stability of the modified materials was improved as compared to that of bare Co-MNP. The subsequent desorption of gold could be achieved by using acidified thiourea solution; the highest gold recovery reached 85%.     

Synthesis of spinel CuCo2O4 nanoparticles and its application in p-nitrophenol reduction

Journal of Sol-Gel Science and Technology - CuCo2O4 spinel nanoparticles were successfully preparedvia a sol–gel method, which were firstly employed in catalytic reduction of p-nitrophenol to...     

Evaluation of the interaction of a guanylhydrazone derivative with cobalt ferrite nanoparticles and PAMAM electrochemical and UV/visible spectroscopic techniques

Journal of Solid State Electrochemistry - Nowadays, scientific research grows a lot around nanotechnology, which connects many areas of knowledge such as electrochemistry and magnetic nanoparticles...