Solvation and dynamic behavior of cyclodextrins in dimethyl sulfoxide solution

High-frequency dielectric relaxation behavior up to 20 GHz was investigated for plain (alpha, beta, gamma) and (62 and 100%) methylated cyclodextrins, CDs, in dimethyl sulfoxide, DMSO, solution. Each hydrogen atom of OH groups of the CDs solvated a DMSO molecule for a residence time of 130-180 ps due to the hydrogen bond formation to an oxygen atom of DMSO, and a few DMSO molecules were included in cavities of the CDs for a while similar to the residence time. The overall rotational relaxation modes of solvated CDs were also observed depending on the effective sizes of the solvated CDs.     

Investigations on the structure of dimethyl sulfoxide and acetone in aqueous solution

Aqueous solutions of dimethyl sulfoxide (DMSO) and acetone have been investigated using neutron diffraction augmented with isotopic substitution and empirical potential structure refinement computer simulations. Each solute has been measured at two concentrations-1:20 and 1:2 solute:water mole ratios. At both concentrations for each solute, the tetrahedral hydrogen bonding network of water is largely unperturbed, though the total water molecule coordination number is reduced in the higher 1:2 concentrations. With higher concentrations of acetone, water tends to segregate into clusters, while in higher concentrations of DMSO the present study reconfirms that the structure of the liquid is dominated by DMSO-water interactions. This result may have implications for the highly nonideal behavior observed in the thermodynamic functions for 1:2 DMSO-water solutions.     

Anodic reactions of the halides in dimethyl sulfoxide at the pyrolytic graphite electrode

The anodic reactions of the halide ions in dimethyl sulfoxide at the pyrolytic graphite electrode have been studied. The iodide ion demonstrates a 3-step oxidation; the bromide, a 2-step oxidation and chloride, a 1-step oxidation. The electrode reaction (X^-→$\text{1}\text{2}$ X₂ + e^-) is complicated by a catalytic reaction occurring after the electrode reaction. The catalytic reaction is important for only bromide and chloride causing a considerable diffusion current enhancement. The αn_a value for all 3 primary reactions is of the order of 0.5.     

An acidity scale of 1,3-dialkylimidazolium salts in dimethyl sulfoxide solution

Equilibrium acidities of 16 1,3-dialkylimidazolium-type ionic liquid (IL) molecules (1-16) were systematically measured by the overlapping indicator method at 25 degrees C in dimethyl sulfoxide (DMSO) solution. The pKa values were observed to range from 23.4 for IL 12 to 19.7 for IL 6 (Tables 1 and 2), responding mainly to structural variations on the cation moiety. Excellent agreement between the spectrophotometrically determined pKa and that derived from NMR titration for 1,3,4,5-tetramethylimidazolium bis(trifluoromethanesulfonyl)imide (12) and the close match of the obtained pK values with the reported data in literature provide credence to the acidity measurements of the present work. The substituent effects at the imidazolium ring and the effects of counterions on the acidities of ionic liquids are discussed.     

Water effect on the gelation behavior of polyacrylonitrile/dimethyl sulfoxide solution

The gelation behavior of polyacrylonitrile (PAN)/dimethyl sulfoxide (DMSO) solution containing different amounts of water has been investigated using various methods. The ternary phase diagram of PAN/DMSO/water system indicated that water enhanced the temperature at which phase separation of PAN/DMSO solution occurred. Intrinsic viscosities [η] of dilute PAN/DMSO solution and PAN/DMSO/water solution at varied temperatures were measured to examine the influence of water on the phase behavior of PAN/DMSO solution. The presence of water in the solution gave rise to elevated critical temperature T_c. The gelation temperature T_g obtained by measuring the loss tangent tan δ at different oscillation frequencies in a cooling process was found to increase with increased water content in the solution. The critical relaxation exponent n value, however, changed little with varied concentration. During the aging process, the gelation rate of PAN/DMSO solution increases with the water level. The n values of the PAN/DMSO solutions with 2 wt% and 4 wt% water were a little larger than that of the solution without water, which may be explained by the turbid gel resulted from phase separation. The n values obtained in the aging process were larger than those obtained in the cooling process for the same three solutions, ascribed to the weaker gel with less cross-linking points formed in long time. Water led to the formation of denser gel structure. The coarser gel surface can also be attributed to the phase separation promoted by water.     

First-principle predictions of absolute pKa's of organic acids in dimethyl sulfoxide solution

MP2/6-311++G(d,p) and B3LYP/6-311++G(2df,p) methods were found to be able to predict the gas-phase acidities of various organic acids with a precision of 2.2 and 2.3 kcal/mol. A PCM cluster-continuum solvation method was developed that could predict the solvation free energies of various neutral, cationic, and anionic organic species in DMSO with a precision of about 2.0 kcal/mol. Using these carefully tested methods, we successfully predicted the pKa's of 105 organic acids in DMSO with a precision of 1.7-1.8 pKa units. We also predicted the pKa's of a variety of organosilanes in DMSO for the first time using the newly developed methods. This study was one of the first that employed first-principle methods for calculating pKa's of unrelated compounds in organic solutions.     

Structure of the hydrated and dimethyl sulfoxide solvated rubidium ions in solution

The structure of the hydrated and the dimethyl sulfoxide solvated rubidium ions in solution has been determined by means of large-angle X-ray scattering (LAXS) and extended X-ray absorption fine structure (EXAFS) studies. The models of the hydrated and dimethyl sulfoxide solvated rubidium ions fitting the experimental data best are square antiprisms with Rb-O bond distances of 2.98(2) and 2.98(3) A, respectively. The EXAFS data show a significant asymmetry in the Rb-O bond distance distribution with C(3) values of 0.0076 and 0.015 A(3), respectively. No second hydration sphere is observed around the hydrated rubidium ion. The dimethyl sulfoxide solvated rubidium ion displays a Rb-O-S bond angle of ca. 130 degrees, which is typical for a medium hard electron acceptor such as rubidium.     

Viscoelastic behavior of polyacrylonitrile/dimethyl sulfoxide concentrated solution with water

The spinnability and polydispersity of polyacrylonitrile/dimethyl sulfoxide (PAN/DMSO)/H₂O spinning solutions with conventional PAN molecular weight and comparative high PAN concentration have been investigated using a cone‐plate rheometer. It is observed from the measurements that, the viscosities of the solutions decreased with the rising of shear rate, and then stabilized to almost the same value, regardless of the PAN concentration. The chain orientation in the fiber formed under constant shear rate cannot be changed considerably even after long relaxation of more than 900s. For dynamic experiments, a steady increase of both G′ and G″ with escalating oscillation frequency was seen for all samples. Higher viscous‐elastic modulus at higher H₂O content was found, too. It is also concluded from the log G′ ? log G″ plot and the gel point that the PAN/DMSO/H₂O system with regular PAN molecular weight behaves very close to a mono‐disperse system, thus very suitable for gel spinning and for preparation of high performance PAN precursor fiber. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1437–1442, 2009     

Thermolysis of dimethyl sulfoxide

The thermal decomposition of dimethyl sulfoxide at small extent of reaction has been studied at temperatures of 297-350°C and pressures of 10–400 Torr. The major products CH₄, C₂H₄, and SO₂ were shown to follow first-order kinetics. The activation energies for production of each was about 48 kcal·mole^?1. A chain mechanism has been postulated in the light of the results of isotopic substitution experiments.     

Kinetics and mechanism of oxidation of dimethyl sulfoxide by chloramine-T in aqueous solution

The kinetics of oxidation of dimethyl sulfoxide (DMSO) by chloramine-T (CAT) is studied in HClO₄ and NaOH media with OsO₄ as a catalyst in the latter medium. In acid medium, the rate law is -d [CAT]/dt = k [CAT][DMSO][H⁺]. Alkali retards the reaction and the rate law takes the form -d [CAT]/dt = k [CAT][DMSO][OsO₄]/[NaOH], but is reduced to -d [CAT]/dt = k [CAT][DMSO] at higher alkali concentrations. The reaction is subjected to changes in (a) ionic strength, (b) concentrations of added neutral salts, (c) concentrations of added reaction product, (d) dielectric constant, and (e) solvent isotope effect, and the subsequent effects on the reaction rate are studied. The reaction mechanism in acid medium assumes an electrophilic attack by the free acid RNHCl (CAT′) at the sulfur site in DMSO, forming a reaction intermediate which subsequently decomposes to dimethyl sulfone on hydrolysis. Formation of a cyclic complex between RNHCl and OsO₄ which interacts with the substrate in a slow step explains the observed results in alkaline medium. The simplification of the rate equation at higher alkali concentrations is attributed to a direct reaction between chloramine-T and the substrate.     

Carbocation-forming reactions in dimethyl sulfoxide

Mesylate derivatives of 3-aryl-3-hydroxy-beta-lactams and thiolactams react in DMSO-d(6) by first-order processes to give alcohol products. Substituent effect studies implicate carbocation intermediates (ion-pairs) that are captured by DMSO-d(6) to give transient oxosulfonium ions. Rapid reaction of the oxosulfonium ions with trace amounts of water leads to the alcohol product and regenerates DMSO-d(6). H(2)(17)O labeling studies show that (17)O is incorporated into the DMSO. The mesylate derivatives of endo- and exo-2-hydroxy-2-phenylbicyclo[2.2.1]heptan-3-one also react in DMSO-d(6) to give the alcohol products. Ion-pair intermediates that capture DMSO giving unstable oxosulfonium ions are again proposed. Exo-2-phenyl-endo-bicyclo[2.2.1]heptyl trifluoroacetate readily eliminates trifluoroacetic acid in DMSO-d(6) via a cationic mechanism involving loss of the endo-trifluoroacetate leaving group as well as an exo-hydrogen. The O-methyl oxime derivative of alpha-chloro-alpha,alpha-diphenylacetophenone reacts in DMSO-d(6) to give 1-methoxy-2,3-diphenylindole, a product derived from cyclization of a cationic intermediate. A common ion rate suppression provides further evidence for a cationic mechanism. The triflate derivative of pivaloin reacts by a cationic mechanism in DMSO-d(6) to give rearranged products. The rate is even faster than in highly ionizing solvents such as trifluoroethanol or trifluoroacetic acid. 1-Adamantyl mesylate reacts in DMSO-d(6) by a first-order process (Y(OMs) = -4.00) to give a long-lived oxosulfonium ion, 1-Ad-OS(CD(3))(2)(+), which can be characterized spectroscopically. This oxosulfonium ion reacts only slowly with water at elevated temperatures to give 1-adamantanol. DMSO is therefore a viable solvent for k(s), k(C), and k(Delta) cationic processes.     

Preferential solvation of lysozyme by dimethyl sulfoxide in binary solutions of water and dimethyl sulfoxide

To reveal the denaturation mechanism of lysozyme by dimethyl sulfoxide (DMSO), thermal stability of lysozyme and its preferential solvation by DMSO in binary solutions of water and DMSO was studied by differential scanning calorimetry (DSC) and using densities of ternary solutions of water (1), DMSO (2) and lysozyme (3) at 298.15 K. A significant endothermic peak was observed in binary solutions of water and DMSO except for a solution with a mole fraction of DMSO (x ₂) of 0.4. As x ₂ was increased, the thermal denaturation temperature T _m decreased, but significant increases in changes in enthalpy and heat capacity for denaturation, ΔH _cal and ΔC _p, were observed at low x ₂ before decreasing. The obtained amount of preferential solvation of lysozyme by DMSO (∂g ₂/∂g ₃) was about 0.09 g g⁻¹ at low x ₂, indicating that DMSO molecules preferentially solvate lysozyme at low x ₂. In solutions with high x ₂, the amount of preferential solvation (∂g ₂/∂g ₃) decreased to negative values when lysozyme was denatured. These results indicated that DMSO molecules do not interact directly with lysozyme as denaturants such as guanidine hydrochloride and urea do. The DMSO molecules interact indirectly with lysozyme leading to denaturation, probably due to a strong interaction between water and DMSO molecules.     

Vinylation of pyrroles in dimethyl sulfoxide

A number of 1-vinylpyrroles were obtained in up to 97% yields by base-catalyzed addition of substituted pyrroles to acetylene in dimethyl sulfoxide at 80–100°C.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 213–214, February, 1977.     

Construction of a dimethyl sulfoxide sensor based on dimethyl sulfoxide reductase immobilized on a au film electrode.

A novel dimethyl sulfoxide (DMSO) sensor using DMSO reductase and film electrodes was constructed. The Au and Ag electrodes were fabricated on slide glass by vacuum deposition and the application of a photolithographic technique. The micro-chamber (4 x 50 x 1 mm, volume 200 microl) was fabricated on a poly(dimethylsiloxane) (PDMS) polymer. The Pt electrode was implanted in a PDMS polymer. DMSO reductase was immobilized on a Au film electrode with bovine serum albumin (BSA)-glutaraldehyde. This sensor could determine DMSO in an unpurged aqueous solution with glucose oxidase (GOD) and catalase (CAT) for oxygen removal. The DMSO sensor showed a linear response within 1 mM DMSO with a correlation coefficient of 0.999. The detection limit was 200 microM (3sigma), and the sensitivity was 23.8 mA M(-1) cm(-2). The relative standard deviations at each concentration were within 3.6%.     

Mechanism of the reaction of radicals with peroxides and dimethyl sulfoxide in aqueous solution

The reactions of methyl and methylperoxyl radicals derived from dimethyl sulfoxide (DMSO) with hydrogen peroxide, peroxymonocarbonate (HCO4 (-)), and persulfate were studied. The major reaction observed for the hydroperoxides was the abstraction of the hydrogen atom by the radicals. The radicals interact with a lone pair of electrons on the peroxide to produce methanol and formaldehyde. Furthermore, the results indicate that in RO2H and RO2R', electron-withdrawing groups cause a considerable increase in the reactivity of the peroxides towards the radicals and not only towards nucleophiles. The HO2 (.)/O2 (.-) and CO3 (.-) radicals react with DMSO to produce methyl radicals. Thus, the formation of the (.)CH3 radicals in the presence of DMSO is not proof of the formation of the (.)OH radicals in the system. These reactions must be considered when radical processes, such as in biological and catalytic systems, are studied. Especially, the plausible role of HCO4 (-) ions in biological systems as a source of oxidative stress cannot be overlooked.     

Molecular weight and aggregation of Aeromonas gum treated with dimethyl sulfoxide in aqueous solution

Aeromonas (A) gum, an acidic hetero polysaccharide, in 0.2 M LiCl/dimethyl sulfoxide (DMSO) was fractionated satisfactorily according to the nonsolvent addition method. Eight fractions were chosen to examine their aggregation behavior in aqueous solution. The weight‐average molecular weight (M_w), radius of gyration 〈S²〉^1/2, and intrinsic viscosities [η] of the fractions in 0.2 M LiCl/DMSO and 0.5 M NaCl aqueous solution at 25 °C were measured by static light scattering and viscometry. The results indicated that the A gum was aggregated in 0.5 M NaCl aqueous solution at 25 °C, and the aggregates were broken in 0.2 M LiCl/DMSO. The apparent weight‐average aggregation number (N_ap) of the fractions increased with the process of fractionation, that is, N_ap increased from 1.1 to 15 with decreasing M_w of the single chain. The fractions obtained by treating with DMSO were more easily dissociated in the aqueous solution, and its N_ap was lower than that of the A gum fractions that were not treated with DMSO. Moreover, the A gum molecules with relatively low M_w aggregated easily to form a compact spherelike structure in the aqueous solution. Elemental analysis and ¹³C NMR spectroscopy indicated that DMSO was adsorbed on the A gum molecules caused by the fractionation program; DMSO not only prevented the polysaccharide aggregation but also increased the solubility. A model has been proposed to describe the aggregation behavior of the A gum chains with DMSO overcoat in the aqueous solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2269–2276, 2002     

Rheological properties of cellulose solution in paraformaldehyde/dimethyl sulfoxide system (1)

The rheological properties of three cellulose samples are investigated, including the dependence of the non‐Newtonian Index, structural viscosity and zero shear viscosity on temperature and the concentration of their paraformaldehyde/dimethyl sulfoxide solutions; the values of viscous flow activation energy of them are higher than that of the viscose solution. With the increase of molecular weight, solution concentration and the decrease of temperature, the rheological properties become worse. The rheological properties of cotton linters Cotton 1 are better than those of wood pulp Wood 2 despite a similar degree of polymerization. Copyright © 1999 John Wiley & Sons, Ltd.