Electrical double layer and adsorption of iodide ions at the Bi | acetonitrile interface

The adsorption of I^? ions on the Bi(111) single crystal plane from solutions in acetonitrile has been investigated by impedance measurement method. The ionic charge due to the specific adsorption has been obtained using the mixed electrolyte method applied for both electrode charge and electrode potential as the independent electrical variables. The Gibbs energy of ions adsorption has been calculated using the virial adsorption isotherm. It was found that under comparable conditions the results obtained at constant electrode potential and at constant electrode charge are coincident and the Gibbs energy of I^? anion adsorption increases in the sequence of solvents: methanol < ethanol < propylene carbonate < acetonitrile. The electrosorption valency has been calculated and it was found that this parameter increases in the sequence propylene carbonate < ethanol < methanol < acetonitrile.     

Adsorption of iodide ions at the Bi | vinylene carbonate interface

Journal of Solid State Electrochemistry - The adsorption of I− anions on the Bi(111) single-crystal plane from solutions in vinylene carbonate has been investigated with impedance measurement...     

Electrical double layer at the mercury-nitromethane solution interface

The differential capacity and the surface charge density curves as a function of the electrode potential for mercury/electrolyte solution in nitromethane interface are presented. For all the systems studied the capacity hump at the anodic potential region is observed. The height and the location of the hump considerably depends on the kind of anion. As a test of specific adsorption of ions in the systems studied the Esin-Markov effect was examined. The results indicated that anions appear to be specifically adsorbed from nitromethane in the order PF₆^?<ClO₄^?<Cl^?<SCN^?.     

Electrical double layer at ionic surfactant solution-air interface

A system of equations for calculating the characteristics of an electrical double layer formed in ionic surfactant solution containing a background electrolyte at its boundary with air is derived according to the Gouy-Chapman-Stern theory. Procedures for its solution are considered with allowance for experimental information on the surface tension and electrosurface properties of these systems.     

Potential-dependent adsorption and transfer of poly(diallyldialkylammonium) ions at the nitrobenzene|water interface

Electrochemically driven adsorption and partition of a series of poly(diallyldialkylammonium) ions (PDADAA(+): alkyl = methyl, ethyl, propyl, and butyl) at the nitrobenzene (NB)|water (W) interface have been studied using voltammetry and electrocapillary measurements. When the phase-boundary potential, Δφ, that is, the inner potential of the W phase referred to that of the NB phase, is negative, poly(diallyldimethylammonium) (PDADMA(+)) shows little surface activity. The scanning of Δφ in the positive direction induces, first, the adsorption of PDADMA(+) at the interface and, then, the desorption of adsorbed PDADMA(+) ions into the NB phase, followed by the diffusion-limited transfer of PDADMA(+) from W to NB. The elongation of the dialkyl chains gives the stronger surface activity of PDADAA(+) even when Δφ < 0. The PDADAA(+) polyions studied are only slightly more hydrophilic than the corresponding monomers. However, the polycationic character of PDADAA(+) renders the adsorption, desorption, and ion transfer strongly dependent on Δφ and gives rise to unusual, M-shaped electrocapillary curves. The interplay of adsorption-desorption and ion transfer of PDADAA(+) ions induces the electrochemical instability of the interface and the emulsion formation on the NB side of the interface.     

Electrical double layers at the oil/water interface

This review presents the historical development and current status of the theory of the electrical double layer at a liquid/liquid interface. It gives rigorous thermodynamic definitions of all basic concepts related to liquid interfaces and to the electrical double layer. The difference between the surface of a solid electrode and the interface of two immiscible electrolyte solutions (ITIES) is analyzed in connection to their electrical properties. The most important classical relationships for the electrical double layer are presented and critically discussed. The generalized adsorption isotherm is derived. After a short review of the classical Gouy-Chapman and Verwey-Niessen models, more recent developments of the double layer theory are presented. These include effects of variable dielectric permittivity, nonlocal electrostatics, hydration forces, the modified Poisson-Boltzmann equation and the ion-dipole plasma. The relative merits of different theories are estimated by comparing them with computer simulation of the ITIES and electrical double layer. Special attention is given to the structure of ITIES and its variation due to adsorption of ions and amphiphilic molecules.     

On the adsorption of extended viologens at the electrode|electrolyte interface

Extended viologens represent a group of organic molecules intended to be used as molecular wires in molecular electronic devices. Adsorption properties of a novel series of extended viologen molecules were studied at the mercury electrode|electrolyte interface. These compounds form compact monolayers around the potential of zero charge with a constant differential capacitance value of 2.5 ± 0.2 μF cm(-2) independent of temperature, length of the molecule, and its bulk concentration. At more negative potentials their reduction in the adsorbed state takes place. We showed that the adsorption process is diffusion controlled and time needed to fully cover the electrode surface is independent of the electrode potential. A modified Koryta equation was employed for the calculation of the surface concentration of the adsorbates leading to the value of 5.3 × 10(-11) mol cm(-2) for the shortest wire and to 1.6 × 10(-11) mol cm(-2) for the longest one. Based on the space filling model and the differential capacitance value in the compact film region, it was postulated that these molecules lay flat on the electrode surface.     

Ellipsometric characterization of ethylene oxide-butylene oxide diblock copolymer adsorption at the air-water interface

Ellipsometry was used to determine the adsorbed layer thickness (d) and the surface excess (adsorbed amount, Gamma) of a nonionic diblock copolymer, E(106)B(16), of poly(ethylene oxide) (E) and poly(butylene oxide) (B) at the air-water interface. The results were obtained (i) by the conventional ellipsometric evaluation procedure using the change of both ellipsometric angles Psi and Delta and (ii) by using the change of Delta only and assuming values of the layer thickness. It was demonstrated that the calculated surface excesses from the different methods were in close agreement, independent of the evaluation procedure, with a plateau adsorption of about 2.5 mg/m(2) (400 A(2)/molecule). Furthermore, the amount of E(106)B(16) adsorbed at the air-water interface was found to be almost identical to that adsorbed from aqueous solution onto a hydrophobic solid surface. In addition, the possibility to use combined measurements with H(2)O or D(2)O as substrates to calculate values of d and Gamma was investigated and discussed. We also briefly discuss within which limits the Gibbs equation can be used to determine the surface excess of polydisperse block copolymers.     

Temperature effects on electrical double layer at solid-aqueous solution interface

Despite the significant influence of solution temperature on the structure of electrical double layer, the lack of theoretical model intercepts us to explain and predict the interesting experimental observations. In this work, we study the structure of electrical double layer as a function of thermochemical properties of the solution by proposing a phenomenological temperature dependent surface complexation model. We found that by introducing a buffer layer between the diffuse layer and stern layer, one can explain the sensitivity of zeta potential to temperature for different bulk ion concentrations. Calculation of the electrical conductance as function of thermochemical properties of solution reveals the electrical conductance not only is a function of bulk ion concentration and channel height but also the solution temperature. The present work model can provide deep understanding of micro- and nanofluidic devices functionality at different temperatures.     

Photocatalytic degradation of aniline at the interface of TiO2 suspensions containing carbonate ions

The degradation of aniline has been investigated using aqueous TiO2 suspensions containing carbonate ions as photocatalyst. The addition of carbonate to Degussa P-25 increased the number of active adsorption sites at its surface. For the TiO2 suspensions containing carbonate ions the intensity of adsorption of aniline increased to 6.9 x 10(2) from 5.5 x 10(2) mol(-1) dm(3) in case of bare TiO2 suspensions. This in turn results in the increased interfacial interaction of the photogenerated charge carriers with the adsorbed aniline and thus enhancing the rate of its photodecomposition to 6.5 x 10(-6) mol dm(-3) s(-1) compared to 2.7 x 10(-6) mol dm(-3) s(-1) in the absence of Na(2)CO(3). The maximum efficiency of this photocatalyst has been obtained upon addition of 0.11 mol dm(-3) of Na(2)CO(3) at pH 10.8. The photocatalytic action is understood by the simultaneous interaction of intermediates, *OH and CO*-(3), and their reactivity with aniline. Azobenzene, p-benzoquinone, nitrobenzene, and NH(3) have been identified as the major products of the photooxidation of aniline. Both the reactant and products have been followed kinetically. The photodegradation follows Langmuir-Hinshelwood Model. The mechanism of the occurring reactions has been analyzed and discussed. In the presence of Na(2)CO(3), 3 x 10(-3) mol dm(-3) of aniline could be photodegraded completely in about 6 h while all organic intermediates decomposed completely within about 10 h.     

Impedance study of adsorption of iodide ions at Cd(0001) and Bi(111) electrode from various solutions with constant ionic strength

Adsorption of iodide ions at the Bi(111) and Cd(0001) electrodes from the aqueous solutions with constant ionic strength 0.1x M KI + 0.1(1−x) M KF and 0.1x M KI + 0.033(1−x) M K₂SO₄ has been studied by impedance spectroscopy. It was found that, to a first approximation, the classical Frumkin–Melik–Gaikazyan equivalent circuit with the slow diffusion-like and adsorption steps can be applied for fitting the experimental impedance data for iodide ions adsorption on Bi(111) and Cd(0001) from aqueous solutions with constant ionic strength. The modified Grafov–Damaskin circuit can be used in the region of electrode potentials, where parallel faradic processes (electroreduction of protons, oxygen traces) are probable. The more complicated Ershler equivalent circuit, taking into account the slow diffusion-like, adsorption and charge transfer steps, is not applicable for characterization of the adsorption process of I⁻ at Bi(111) and Cd(0001) electrodes.     

Studies on the electrical double layer structure at the water/air interface

Effective dipole moments (calculated from experimental data of surface tension and electric surface potential) of some homologous normal alcohols and carboxylic acid were found to vary linearly with the number of carbon atoms in the hydrocarbon chain. Values of effective dipole moments were used for the determination of the effective dipole moments of water molecules , and the dielectric permittivity of the water subphase (₁), as well as in the vicinity of the hydrophobic part of adsorbed molecule (₂). The latter was found to decrease with the increase of the hydrocarbon chain length. Knowing the effective dipole moment of surface water dipoles, the average orientation angle () of water molecules at the inteface was estimated. The calculated potential drop of water varies within the range –0.038 to –2.38 V for two extreme orientations of water dipoles at the surface.     

X-ray study of the electric double layer at the n-hexane/nanocolloidal silica interface

The spatial structure of the transition region between an insulator and an electrolyte solution was studied with x-ray scattering. The electron-density profile across the n-hexane/silica sol interface (solutions with 5, 7, and 12 nm colloidal particles) agrees with the theory of the electrical double layer and shows separation of positive and negative charges. The interface consists of three layers, i.e., a compact layer of Na(+), a loose monolayer of nanocolloidal particles as part of a thick diffuse layer, and a low-density layer sandwiched between them. Its structure is described by a model in which the potential gradient at the interface reflects the difference in the potentials of "image forces" between the cationic Na(+) and anionic nanoparticles and the specific adsorption of surface charge. The density of water in the large electric field (approximately 10(9)-10(10) Vm) of the transition region and the layering of silica in the diffuse layer is discussed.     

The double layer and ion adsorption at the interface between two non-miscible solutions: Part II. Electrocapillary behaviour of some water-nitrobenzene systems

The model of two diffuse layers separated by an inner compact layer proposed in a previous paper [1] for the liquid-liquid interface is tested again on the water-nitrobenzene interface. The sodium bromide and the tetraalkylammonium tetraphenylborate (R⁺R′^?) maintain the ionic strength constant respectively in the aqueous and organic phase and RBr is added to the aqueous phase at different concentrations (R⁺-tetrabutyl, tetrapropyl, tetraethylammonium). Interfacial tensions and potential differences between the two phases, measured for various concentrations of R⁺, lead to an electrocapillary curve comparable to the curve obtained with the classical mercury-aqueous solution system. Furthermore, the dipolar potential drop λ is estimated as very nearly zero.     

Phase transition in an adsorption layer of a soluble surfactant at the air-water interface

In this paper we provide experimental evidence for a phase transition between a liquid- and gas-like phase occurring in an adsorption layer of a soluble surfactant at the air-water interface. The equilibrium surface tension sigma(e) versus bulk concentration sigma(e) (c) isotherm of surface chemically pure sodium 2-[4-(4-trifluoromethyl-phenylazo) phenoxy]-ethane sulfonate was measured at a temperature of 295 K up to the solubility limit of the amphiphile. The sigma(e) (c) isotherm could be fitted by Frumkin's equation of state. The lateral interaction energy is just above the limit for which Frumkin's model predicts a phase transition. The corresponding surface pressure pi versus surface area A isotherm possesses striking similarities to first-order phase transitions in the Langmuir monolayer. The fact that the difference in the two-dimensional density is only a factor of 2 indicates that the system is very close to the critical point. The surface phases were further characterized by surface second harmonic generation. The major structural difference between the two surface phases is the amphiphile's molecular orientation. A mean orientation of the amphiphile of about 80 degrees was found in the gas analogous phase, whereas a molecular tilt of 38 degrees has been identified in the liquid-like phase.