The electrochemical oxidation of single-crystal gold surfaces has been well studied, and the exposed crystal planes can be reliably distinguished based on the peak potentials of oxide formation. However, the multiple oxidation peaks of polycrystalline gold have not yet been unambiguously related to crystal planes. In this work, we used cyclic voltammetric responses of activated polycrystalline gold electrodes recorded in sulfuric acid solutions to allow constructing relationships between crystal planes and oxide peaks. The studies of oxide formation were complemented by measuring double-layer non-faradaic currents, lead underpotential deposition (Pb-upd), the oxygen reduction reaction (ORR), and the hydrogen evolution reaction (HER).
Graphical abstract The link between three gold oxide current peaks and exposed low index crystal planes, viz. Au(100), Au(110) and Au(111) on polycrystalline gold electrode
Nanoporous gold (NPG) prepared via chemical de-alloying has been recently shown to dramatically improve the reversibility and kinetics of Li-O2 batteries, but high cost makes its use as practical electrode material difficult. Recently developed electrochemical routines for synthesis of very thin NPG layers (<100 nm) on various low-cost substrates could potentially provide a feasible economic alternative. In this work, NPG on both gold and glassy carbon (GC) substrates was successfully synthesized via electrochemical de-alloying method and tested as cathode material in Li-O2 batteries. The results show that electrochemically synthesized NPG cathode cycles repeatedly with LiFePO4 anode. The voltage hysteresis is also significantly reduced when NPG is used in comparison with plain GC. Along with these results, challenges that need to be addressed for future implementation of NPG cathode in practical Li-O2 batteries are also discussed.
Functional electrode materials play an increasingly important role in the advancement of energy conversion and storage technologies used in batteries, electrolyzers, supercapacitors, fuel cells, and other electrochemical devices. To address the problems related to accelerating demand for the so-called renewable energy, which are simultaneously coupled with environmental concerns, new generations of materials, engineering methodologies, and innovative techniques are necessary. Among many synthetic methods, microwave-assisted synthesis becomes nowadays a very popular approach to efficiently control both the composition and morphology of solids. In this review, we focus on its applications to create new advanced energy electrode materials.
Peptides with deamidated asparagine residues and oxidized methionine residues are often not resolved sufficiently to allow quantitation of their native and modified forms using reversed phase (RP) chromatography. The accurate quantitation of these modifications is vital in protein biotherapeutic analysis because they can affect a protein’s function, activity, and stability. We demonstrate here that hydrophilic interaction liquid chromatography (HILIC) adequately and predictably separates peptides with these modifications from their native counterparts. Furthermore, coefficients describing the extent of the hydrophilicity of these modifications have been derived and were incorporated into a previously made peptide retention prediction model that is capable of predicting the retention times of peptides with and without these modifications.
In this paper, a facile immobilization of copper hexacyanoferrate nanoparticles (CuHCFNP) on a paraffin wax-impregnated graphite electrode (PIGE) was carried out using the room-temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF4) as an ionic binder. The characteristics of the CuHCFNP/EMIMBF4 gel-modified electrode were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques, and the modified electrode morphology was also characterized using field emission scanning electron microscopy (FESEM). The electrocatalytic behavior of butylated hydroxyl anisole (BHA) at the modified electrode has been investigated in 0.1 M KNO3 in static and dynamic conditions. Under the optimum conditions, the oxidation peak current was proportional to the BHA concentration in the range from 1.5 to 1000 μM with a detection limit of 0.5 μM (S/N = 3). The proposed method was applied to determine BHA content in real samples with satisfactory results.
The analysis of many hydrogen exchange (HX) experiments depends on knowledge of exchange rates expected for the unstructured protein under the same conditions. We present here some minor adjustments to previously calibrated values and a stringent test of their accuracy.
In the lithium-oxygen (Li-O2) cell, the porous structure of the cathode is an important issue as well as challenge for its task of accommodating discharge products and providing free paths for oxygen. Clogging of pores and degradation of materials at the cathode affect the discharge rates and cycling performance of Li-O2 cell. Based on the study of five synthesized nanostructured porous carbons, namely, 2-D ordered mesoporous carbon C-15, 3-D ordered mesoporous carbons C-16 and C-16B with larger pores, hollow core mesoporous shell carbon (HCMSC), and reduced graphene oxide (rGO), we found that the type and pore structure of the carbon significantly affect the electrochemical performance of the cell. Both C-15 and rGO cathodes demonstrate good cell cycleability, while the HCMSC, with its interesting bimodal pore system, is not favorable for further improving cycling performance. The C-16B has similar morphology and electrolyte wettability of C-16. However, the former possesses larger pores, and such porosity significantly improves the cell cycleability up to 44 cycles, corresponding to an extended operation life of 850 h.
Zirconium oxide (ZrO2) is acquiring considerable attention of most of the research groups and leading to a large number of publications due to its unique properties, especially in the context of emerging trends in the third generation of solar cell research. ZrO2 films offer magnificent aspects related to physicochemical properties, and the properties are found to be dependent on synthesis methods. In the present review, various deposition techniques used to grow zirconium oxide thin films and their application to enhance the quantum efficiency of titanium oxide (TiO2) based dye-sensitized solar cells (DSSCs) are discussed. Also, the modulated performances of DSSCs fabricated by growing the conformal ZrO2 insulating films to retard interfacial recombination dynamics on preformed TiO2 films are discussed.
The authors describe an SPR sensor chip coated with gold nanoparticles (AuNPs) that enables highly sensitive determination of genetically modified (GM) crops. Detection is based on localized surface plasmon resonance (LSPR) with its known sensitivity to even minute changes in refractive index. The device consists of a halogen light source, a light detector, and a cuvette cell that contains a sensor chip coated with AuNPs. It is operated in the transmission mode of the optical path to enhance the plasmonic signal. The sample solution containing target DNA (e.g. from the GM crop) is introduced into the cuvette with the sensor chip whose surface was functionalized with a capture DNA. Following a 30-min hybridization, the changes of the signal are recorded at 540 nm. The chip responds to target DNA in the 1 to 100 nM concentration range and has a 1 nM detection limit. Features of this sensor chip include a short reaction time, ease of handling, and portability, and this enables on-site detection and in-situ testing.
Graphical abstract A localized surface plasmon resonance (LSPR)-based nanoplasmonic spectroscopic device enabling a highly sensitive biosensor is developed for the detection of genetically modified (GM) DNA founded in Roundup Ready (RR) soybean.
LiNi1-x-yCoxMnyO2 (NCM) with excessive lithium is known to exhibit high rate capability and charge–discharge cycling durability. However, the practical usage of NCM is difficult, because the positive electrode slurry is unstable and battery cells swell due to the alkaline residual lithium compound generated on the surface of NCM particles. To reduce the residual lithium compound, ammonium metatungstate (AMT) added to NCM is studied, and the effect is investigated by scanning electron microscopy, aberration-corrected scanning transmission electron microscopy, X-ray diffractometry, synchrotron X-ray diffractometry, and several electrochemical measurements. It is found that the AMT modification reduces the amount of alkaline residual lithium compound and improves the rate capability due to the ~1-nm-thick W-rich layer generated on the NCM surface.
The authors describe a colorimetric method for the determination of the staphylococcal enterotoxin B (SEB) that also allows for visual readout. The assay is based on the growth of gold nanoparticles (AuNPs) mediated by a hemin/G-quadruplex DNAzyme which generates a color change from red to blue in the presence of SEB. The method is enzyme-free and does not require a label. The kinetics of the formation of the AuNPs is controlled by the hemin/G-quadruplex DNAzyme and this is key to the signal generation mechanism. In the presence of SEB, the reactions between aptamer and target modulated the amount of single probe G strands that form DNAzyme capable of consuming hydrogen peroxide. The growth process of AuNPs is influenced by the resulting concentration of H2O2 and leads to the color change. Under optimal conditions, a linear relationship exists between absorbance and SEB concentration in the range from 0.1 to 500 pg·mL￣1 which covers the clinically relevant range. In case of visual detection, the lower limit of detection is 1 pg·mL?1. The assay described here is sensitive, comparably inexpensive and can detect SEB rapidly without the need for sophisticated equipment. In our perception, the method has a wide scope in that it may be adapted to various nucleic acids, proteins and other biomolecules if respective aptamers are available.
Efficient electrocatalysts for the oxygen evolution reaction (OER) are critical for various energy conversion devices such as metal-air batteries, rechargeable fuel cell, and water splitting for hydrogen production. In this work, a novel non-precious-metal OER catalyst was prepared from the pyrolysis of a Ni-Schiff base complex with thiourea. The derived catalyst is composed of nickel oxide coupled with nickel sulfide loaded on nitrogen-doped carbon matrix (NiO-NiS/N-C), which manifested excellent OER electrocatalytic activity, and an onset potential of 1.54 V vs reversible hydrogen electrode was achieved in alkaline electrolyte. The high performance of as-obtained electrocatalyst was illustrated by fully dispersed active components of NiO coupled with NiS nanoparticles, as well as the strong interaction between NiS, NiO particles, and N-doped carbon substrate. Our findings supply an easier path to fabricate the active catalyst through one-step metal organic framework transformation way and are promising for use in energy conversion systems and also yield new impetus for exploring other non-noble metal catalysts.
In this study, sodium salts of saturated linear carboxylic acids with the general formula CH3(CH2)n?2COONa (n = 14, 18)—labeled NaC14 and NaC18—were used to inhibit the corrosion of metallic lead via the development of protective coatings for lead heritage objects. The salts were dissolved in water/ethanol 1:1 (V/V) mixture at 50 °C to increase their solubility, and the coatings were formed by immersing lead samples in the resulted solutions for 24 h. The coatings were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. A hydrophobic layer of lead carboxylates appeared to form on the metal surface, and its corrosion inhibition properties were examined by linear sweep voltammetry and electrochemical impedance spectroscopy in a corrosive solution simulating the environment of museums with uncontrolled conditions. The lead carboxylates formed a protective barrier that inhibited further lead corrosion.
The nucleation of Sn nanoparticles by chemical reduction was studied using three different carbonaceous substrates, to obtain Sn/C composites. When used as active materials in anodes for lithium-ion batteries, these composites displayed higher capacities than commercially used graphite, and showed a good cyclability. The differences in morphology, capacity, cyclability, and diffusion between the resulting materials are highlighted. The resulting materials were characterized by charge-discharge cycling, voltammetry, EIS, SEM, and TEM microscopy. It was found that the substrate has a determinant effect on the deposition of Sn. This effect is interpreted in terms of the relative adsorption energies of a single Sn atom obtained from DFT calculations.
Two-dimensional Fourier transform ion cyclotron resonance mass spectrometry (2D FT-ICR MS) allows data-independent fragmentation of all ions in a sample and correlation of fragment ions to their precursors through the modulation of precursor ion cyclotron radii prior to fragmentation. Previous results show that implementation of 2D FT-ICR MS with infrared multi-photon dissociation (IRMPD) and electron capture dissociation (ECD) has turned this method into a useful analytical tool. In this work, IRMPD tandem mass spectrometry of calmodulin (CaM) has been performed both in one-dimensional and two-dimensional FT-ICR MS using a top-down and bottom-up approach. 2D IRMPD FT-ICR MS is used to achieve extensive inter-residue bond cleavage and assignment for CaM, using its unique features for fragment identification in a less time- and sample-consuming experiment than doing the same thing using sequential MS/MS experiments.
Differential or field asymmetric waveform ion mobility spectrometry (FAIMS) operating at high electric fields fully resolves isotopic isomers for a peptide with labeled residues. The naturally present isotopes, alone and together with targeted labels, also cause spectral shifts that approximately add for multiple heavy atoms. Separation qualitatively depends on the gas composition. These findings may enable novel strategies in proteomic and metabolomic analyses using stable isotope labeling.
Thin films of iron-filled carbon nanotubes prepared through the liquid/liquid interfacial method were modified with a mixture of hexacyanometallates (HCMs) Prussian blue and ruthenium purple. Two different approaches were used in order to obtain both materials in the composites, based on a direct reaction starting from a mixture of both precursors or a step-by-step deposition of each compound. The modified films were characterized by cyclic voltammetry, Raman spectroscopy, X-ray diffraction, scanning electron microscopy, and UV-Vis spectroscopy, confirming the formation of a mixture of HCMs in both methods of synthesis. Stability studies were evaluated in different supporting electrolytes, and composites presented good performances due to carbon nanotube stabilization. Electrochromic properties were also evaluated for selected composites, showing high electrochromic efficiency and stability.
The preparation of molybdenum-modified hematite electrodes by means of chemical bath deposition and their photoelectrochemical behavior toward water oxidation are reported in this work. The addition of a molybdenum precursor to the bath solution for hematite deposition induces a remarkable change of morphology in the resulting film from (110)-oriented nanorods to polyhedral nanoparticles. Despite the resulting loss of order, by controlling the Mo/Fe molar ratio in the bath solution, a significant improvement of the water oxidation photocurrent is achieved compared to nanorod pristine hematite electrodes. Such a (photo)electrochemical enhancement is mainly explained by an effective surface state passivation in Mo-modified hematite films. FE-SEM, TEM, XRD, and XPS were employed for electrode structural and morphological characterization.
A porous, hollow, microspherical composite of Li2MnO3 and LiMn1/3Co1/3Ni1/3O2 (composition: Li1.2Mn0.53Ni0.13Co0.13O2) was prepared using hollow MnO2 as the sacrificial template. The resulting composite was found to be mesoporous; its pores were about 20 nm in diameter. It also delivered a reversible discharge capacity value of 220 mAh g?1 at a specific current of 25 mA g?1 with excellent cycling stability and a high rate capability. A discharge capacity of 100 mAh g?1 was obtained for this composite at a specific current of 1000 mA g?1. The high rate capability of this hollow microspherical composite can be attributed to its porous nature.
A novel molecular model of carbonyl-substituted phthalocyanine compounds used as the cathode material in a lithium-ion battery is demonstrated. Tetra-carboxyl and octa-carboxyl groups are substituted onto a phthalocyanine-conjugated system. The conductivities of phthalocyanine compounds are effectively improved by I2 doping, without affecting the capacity and energy density. Taking lithium as the counter-electrode, the electrochemical properties of the microparticles are investigated, and the electrochemical mechanism of carboxyl groups substituted with phthalocyanines is analyzed. The results indicate that carboxyl-substituted phthalocyanines have high specific capacities. After 20 or 50 cycles, they still retain capacities of about 300 and 500 mA?·?h/g for tetra-carboxyl- and octa-carboxyl-substituted phthalocyanines, respectively. The multiple carbonyl groups and the large numbers of electrons on the phthalocyanine-conjugated system are the two factors contributing to the high specific capacity.
Graphical Abstract A novel molecular model of carbonyl-substituted phthalocyanine compounds used as the cathode in a lithium-ion battery is demonstrated. Multiple carbonyl groups with high electrochemical activity are substituted onto a stable phthalocyanine-conjugated system, resulting in excellent conductivity and high specific capacity after using an iodine-doping technique; this could provide new ideas for electrode materials in lithium-ion batteries.
