共查询到20条相似文献,搜索用时 31 毫秒
1.
Yassine Ben Belgacem Chokri Khaldi Jilani Lamloumi Hisasi Takenouti 《Journal of Solid State Electrochemistry》2016,20(7):1949-1959
For the purpose of lowering the cost of metal hydride electrode, the La of LaY2Ni9 electrode was replaced by Ce. The electrochemical performances of the CeY2Ni9 negative electrode, at a room and different temperatures, were compared with the parent alloy LaY2Ni9. At room temperature during a long cycling, the evolution of the electrochemical capacity—the diffusivity indicator (\( \frac{D_{\mathrm{H}}}{a^2} \))—the exchange current density, and the equilibrium potential were determined. At different temperatures, the electrochemical characterization of this alloy allowed the estimation of the enthalpy, the entropy, and the activation energy of the hydride formation. The evolution of the high-rate dischargeability was also evaluated at different temperatures. Compared with the parent LaY2Ni9 alloy, CeY2Ni9 exhibits an easy activation and good reaction reversibility. This alloy also conserves a good lifetime during a long-term cycling. A lower activation energy determined for this alloy corresponds to an easy absorption of hydrogen into this new alloy. 相似文献
2.
J. Chen H. Cui G. Q. Wang T. W. Zhou H. Chen H. K. Yuan 《Journal of Cluster Science》2016,27(3):947-964
Theoretical calculations of Co\(_{n-x}\)Pt\(_x\) (n = 1–3; \(x \le n\)) clusters on Ni(100) surface for their spin and orbital magnetic moments, as well as the magnetic anisotropy energy (MAE), are performed by using the density-functional theory (DFT) method including a self-consistent treatment of spin–orbit coupling (SOC). The results reveal that the ferromagnetic Co atoms in intra Co\(_{n-x}\)Pt\(_x\) adclusters couple ferromagnetically to their underlayer Ni atoms. The predominant inter-interactions between Co adatoms and Ni surface with the partly filled 3d band, together with the secondary intra-interactions between Co adatoms and Pt adatoms with fully filled 5d band, lead to a strongly quenched orbital moment (\(\mu _{\mathrm{{orb}}}^{\mathrm{{Co}}}\) = 0.18–0.14 \(\mu _B\); \(\mu _{\mathrm{{orb}}}^{\mathrm{{Pt}}} \approx \) 0.24–0.19 \(\mu _B\)) but a less quenched spin moment (\(\mu _{\mathrm{{spin}}}^{\mathrm{{Co}}} \approx \) 2.0 \(\mu _B\); \(\mu _{\mathrm{{spin}}}^{\mathrm{{Pt}}} \approx \) 0.35 \( \mu _B\)). The MAEs of CoPt adclusters exhibit a strong dependence on alloying effect rather than size effect, which is direly proportional to SOC strength and orbital moment anisotropy. The oxidations of CoPt clusters always reduce orbital magnetic moments and consequently decrease the corresponding MAEs. 相似文献
3.
Yassine Ben Belgacem Chokri Khaldi Sami Boussami Jilani Lamloumi Hamadi Mathlouthi 《Journal of Solid State Electrochemistry》2014,18(7):2019-2026
The electrochemical properties of LaY2Ni9 alloy used as an anode in nickel-metal hydride batteries were investigated at ambient and at different temperatures. Several techniques, such as the galvanostatic charging and discharging, the constant potential discharge, and the potentiodynamic polarization, were applied to characterize these electrochemical properties. The discharge capacity of the LaY2Ni9 alloy increases to reach 258 mAh g?1 after 5 cycles and decreases to 140 mAh g?1 after 100 cycles then stabilizes around this same value indicating good cycling held. The hydrogen diffusion coefficient D H in the bulky alloy is estimated to be (1.02?±?0.11)?×?10?11 cm2 s?1 correlated with the good stability of electrochemical capacity after 100 cycles. The evolution of the ratio \( \frac{D_{\mathrm{H}}}{a^2} \) and the corrosion current density and potential are correlated with the evolution of the electrochemical capacity during the activation and for a long cycling. The enthalpy, the entropy, and the apparent activation energy of the LaY2Ni9 hydride formation are evaluated. The calculated results show that the enthalpy change, the entropy change, and the activation energy are (?42.64?±?1.08), (56.85?±?2.11), and (14.84?±?0.35)?kJ mol?1, respectively. 相似文献
4.
Given a connected surface \({\mathbb {F}}^2\) with Euler characteristic \(\chi \) and three integers \(b>a\ge 1<k\), an \((\{a,b\};k)\)-\({\mathbb {F}}^2\) is a \({\mathbb {F}}^2\)-embedded graph, having vertices of degree only k and only a- and b-gonal faces. The main case are (geometric) fullerenes (5, 6; 3)-\({\mathbb {S}}^2\). By \(p_a\), \(p_b\) we denote the number of a-gonal, b-gonal faces. Call an \((\{a,b\};k)\)-map lego-admissible if either \(\frac{p_b}{p_a}\), or \(\frac{p_a}{p_b}\) is integer. Call it lego-like if it is either \(ab^f\)-lego map, or \(a^fb\)-lego map, i.e., the face-set is partitioned into \(\min (p_a,p_b)\) isomorphic clusters, legos, consisting either one a-gon and \(f=\frac{p_b}{p_a}\,b\)-gons, or, respectively, \(f=\frac{p_a}{p_b}\,a\)-gons and one b-gon; the case \(f=1\) we denote also by ab. Call a \((\{a,b\};k)\)-map elliptic, parabolic or hyperbolic if the curvature \(\kappa _b=1+\frac{b}{k}-\frac{b}{2}\) of b-gons is positive, zero or negative, respectively. There are 14 lego-like elliptic \((\{a,b\};k)\)-\({\mathbb {S}}^2\) with \((a,b)\ne (1,2)\). No \((\{1,3\};6)\)-\({\mathbb {S}}^2\) is lego-admissible. For other 7 families of parabolic \((\{a,b\};k)\)-\({\mathbb {S}}^2\), each lego-admissible sphere with \(p_a\le p_b\) is \(a^fb\) and an infinity (by Goldberg–Coxeter operation) of \(ab^f\)-spheres exist. The number of hyperbolic \(ab^f\,(\{a,b\};k)\)-\({\mathbb {S}}^2\) with \((a,b)\ne (1,3)\) is finite. Such \(a^f b\)-spheres with \(a\ge 3\) have \((a,k)=(3,4),(3,5),(4,3),(5,3)\) or (3, 3); their number is finite for each b, but infinite for each of 5 cases (a, k). Any lego-admissible \((\{a,b\};k)\)-\({\mathbb {S}}^2\) with \(p_b=2\le a\) is \(a^f b\). We list, explicitly or by parameters, lego-admissible \((\{a,b\};k)\)-maps among: hyperbolic spheres, spheres with \(a\in \{1,2\}\), spheres with \(p_b\in \{2,\frac{p_a}{2}\}\), Goldberg–Coxeter’s spheres and \((\{a,b\};k)\)-tori. We present extensive computer search of lego-like spheres: 7 parabolic (\(p_b\)-dependent) families, basic examples of all 5 hyperbolic \(a^fb\) (b-dependent) families with \(a\ge 3\), and lego-like \((\{a,b\};3)\)-tori. 相似文献
5.
S. Vani Latha G. Little Flower K. Rayapa Reddy C. V. Nageswara Rao A. Ratnakar 《Journal of solution chemistry》2017,46(2):305-330
Organic esters of carbonic acid {dimethyl carbonate (DMC)/diethyl carbonate (DEC)/propylene carbonate (PC)}, in combination with a lactate ester {ethyl lactate (EL)}, with green chemistry characteristics were chosen for the present study of molecular interactions in binary liquid mixtures. Densities (ρ) and ultrasonic velocities (U) of the pure solvents and liquid mixtures were measured experimentally over the entire composition range at temperatures (303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. The experimental data was used to calculate thermodynamic and acoustic parameters \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \), \( L_{\text{f}}^{\text{E}} \), \( \bar{V}_{\text{m,1}}^{{}} \), \( \bar{V}_{\text{m,2}}^{{}} \), \( \bar{V}_{\text{m,1}}^{\text{E}} \), \( \bar{V}_{\text{m,2}}^{\text{E}} \), \( \bar{V}_{ 1}^{\text{E,0}} \) and \( \bar{V}_{ 2}^{\text{E,0}} \) and the excess functions were fitted with the Redlich–Kister polynomial equation to obtain the binary solution coefficients and the standard deviations. It was observed that the values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) are positive for the mixtures of (EL + DMC/DEC) and negative for those of (EL + PC) over the entire range of composition and temperature. The positive values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) indicate the action of dispersion forces between the component molecules of (EL + DMC/DEC) mixtures whereas negative values for the mixture (EL + PC) suggest the existence of strong specific interactions between the component molecules, probably resulting from chemical and structural contributions. The excess properties have also been analyzed by using the reduced (\( Y^{\text{E}} /x_{1} x_{2} \)) excess function approach and the results are found to be in agreement with those from the corresponding \( Y^{\text{E}} \)(= \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \)) values. This is further supported by FTIR spectral analysis. 相似文献
6.
\( {\text{CN}} (B^{2}\Sigma ^{ + } \to X^{2}\Sigma ^{ + } ) \) violet system was investigated using optical emission spectroscopy in a non-equilibrium microwave atmospheric-pressure plasma jet in argon expanding in air. From the analysis of the emission spectra of the discharge in the range of 380 and 400 nm, the violet system of CN was found to be overlapped with the \( {\text{N}}_{2}^{ + } \left( {B^{2}\Sigma _{u}^{ + } , v = 1 \to X^{2}\Sigma _{g}^{ + } , v = 1} \right) \) and \( {\text{N}}_{2} \left( {C^{3}\Pi _{u} \to B^{3}\Pi _{g} } \right) \) bands, sequence \( \Delta \upsilon = - \;3 \). A numerical disentangle technique, developed in this work, permitted to obtain a well resolved violet system from the different systems observed, namely the nitrogen First Negative and the Second Positive systems. The \( {\text{CN}} (B^{2}\Sigma ^{ + } \to X^{2}\Sigma ^{ + } ) \) band head intensity was determined and analysed as function of discharge powers between 30 and 150 W and fluxes between 2.5 and 10.0 slm. With aid of this numerical approach it was also possible to obtain the rotational temperature, from (1600 ± 100) to (2300 ± 100) K and vibrational temperature between (9000 ± 800) and (14,000 ± 800) K along the plasma jet. The kinetics of \( {\text{CN}} (B^{2}\Sigma ^{ + } ) \) state was analysed as well. 相似文献
7.
In the present investigations, the excess molar volumes, \( V_{ijk}^{\text{E}} \), excess isentropic compressibilities, \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), and excess heat capacities, \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \), for ternary 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (i) + 1-butyl-3-methylimidazolium tetrafluoroborate (j) + 1-ethyl-3-methylimidazolium tetrafluoroborate (k) mixture at (293.15, 298.15, 303.15 and 308.15) K and excess molar enthalpies, \( \left( {H^{\text{E}} } \right)_{ijk} \), of the same mixture at 298.15 K have been determined over entire composition range of x i and x j . Satisfactorily corrections for the excess properties \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) have been obtained by fitting with the Redlich–Kister equation, and ternary adjustable parameters along with standard errors have also been estimated. The \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) data have been further analyzed in terms of Graph Theory that deals with the topology of the molecules. It has also been observed that Graph Theory describes well \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) values of the ternary mixture comprised of ionic liquids. 相似文献
8.
J. V. Srinivasu K. Narendra Ch. Kavitha B. Subba Rao 《Journal of solution chemistry》2017,46(11):2066-2090
Densities, ρ, and speeds of sound, u, for the binary liquid mixtures of 1,4-butanediol (1,4-BD) + 2-alkoxyethanols {2-methoxyethanol (2-ME), or 2-propoxyethanol (2-PE)} over the whole composition range have been measured at T = (303.15, 308.15, 313.15 and 318.15) K, and at atmospheric pressure (p = 0.1 kPa). Experimental data for the densities and speeds of sound have been used to derive the quantities like excess molar volume, \( V_{\text{m}}^{\text{E}} \), excess isentropic compressibility, \( \kappa_{S}^{\text{E}} \), excess molar isentropic compressibility, \( K_{{S,{\text{m}}}}^{\text{E}} \), excess speed of sound, \( u^{\text{E}} \), and excess isobaric thermal expansion \( \alpha_{p}^{\text{E}} \). These excess parameters were correlated by Redlich–Kister polynomials. Excess partial molar volumes (\( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \)) and their limiting values at infinite dilution (\( \bar{V}_{\text{m,1}}^{{ 0 {\text{E}}}} \) and \( {\bar{\text{V}}}_{\text{m,2}}^{{ 0 {\text{E}}}} \)) have been calculated from the experimental density measurements and were analytically obtained using the Redlich–Kister polynomials. The results are discussed in terms of intermolecular interactions and their dependence on composition and temperature. 相似文献
9.
Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H+B?) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the species HL+, \( {\text{HL}}_{2}^{ + } \), \( {\text{ML}}_{2}^{2 + } \), \( {\text{ML}}_{3}^{2 + } \) and \( {\text{ML}}_{4}^{2 + } \) (M2+ = Ca2+, Sr2+) are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined. In the considered nitrobenzene medium, it was found that the stability of the \( {\text{SrL}}_{2,{\text{org}}}^{2 + } \) complex is somewhat higher than that of species \( {\text{CaL}}_{2,{\text{org}}}^{2 + } \), while the stability constants of the remaining strontium complexes \( {\text{SrL}}_{3,{\text{org}}}^{2 + } \) and \( {\text{SrL}}_{4,{\text{org}}}^{2 + } \) are smaller than those of the corresponding complex species \( {\text{CaL}}_{n}^{2 + } \) (n = 3, 4). 相似文献
10.
Apparent molar volumes, apparent molar adiabatic compressibilities and viscosity B-coefficients for metformin hydrochloride in aqueous d-glucose solutions were determined from solution densities, sound velocities and viscosities measured at T = (298.15–318.15) K and at pressure p = 101 kPa as a function of the metformin hydrochloride concentrations. The standard partial molar volumes (\( \phi_{V}^{0} \)) and slopes (\( S_{V}^{*} \)) obtained from the Masson equation were interpreted in terms of solute–solvent and solute–solute interactions, respectively. Solution viscosities were analyzed using the Jones–Dole equation and the viscosity A and B coefficients discussed in terms of solute–solute and solute–solvent interactions, respectively. Adiabatic compressibility (\( \beta_{s} \)) and apparent molar adiabatic compressibility (\( \phi_{\kappa }^{{}} \)), limiting apparent molar adiabatic compressibility (\( \phi_{\kappa }^{0} \)) and experimental slopes (\( S_{\kappa }^{*} \)) were determined from sound velocity data. The standard volume of transfer (\( \Delta_{t} \phi_{V}^{0} \)), viscosity B-coefficients of transfer (\( \Delta_{t} B \)) and limiting apparent molar adiabatic compressibility of transfer (\( \Delta_{t} \phi_{\kappa }^{0} \)) of metformin hydrochloride from water to aqueous glucose solutions were derived to understand various interactions in the ternary solutions. The activation parameters of viscous flow for the studied solutions were calculated using transition state theory. Hepler’s coefficient \( (d\phi /dT)_{p} \) indicated the structure making ability of metformin hydrochloride in the ternary solutions. 相似文献
11.
Sound speeds have been measured for aqueous solutions of the nucleosides adenosine, cytidine, and uridine at T = (288.15 and 313.15) K and at ambient pressure. The partial molar isentropic compressions at infinite dilution, \( K_{S,2}^{\text{o}} \), were derived from the speed of sound data. The partial molar heat capacities at infinite dilution, \( C_{p,2}^{\text{o}} \), for the three nucleosides at T = (288.15 and 313.15) K were also determined. These \( K_{S,2}^{\text{o}} \) and \( C_{p,2}^{\text{o}} \) results, along with partial molar isobaric expansions at infinite dilution, \( E_{2}^{\text{o}} = \, (\partial V_{2}^{\text{o}} /\partial T)_{p} \), that were derived using data from the literature, were used to evaluate the partial molar isothermal compressions at infinite dilution, \( K_{T,2}^{\text{o}} \{ K_{T,2}^{\text{o}} = - \, (\partial V_{2}^{\text{o}} /\partial p)_{T} \} \), for the nucleosides. The \( K_{T,2}^{\text{o}} \) results were rationalized in terms of nucleoside hydration and its temperature dependence. 相似文献
12.
Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2(1)/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \). 相似文献
13.
Damir I. Sagdeev Marina G. Fomina Ilmutdin M. Abdulagatov 《Journal of solution chemistry》2017,46(4):966-988
The density and viscosity of a ternary 1-hexene(1) + 1-octene(2) +1-decene(3) mixture (\( w_{1} = w_{2} = w_{3} = 0.333 \) weight fractions or \( x_{1} = 0.4257 \),\( x_{2} = 0.3190 \), \( x_{3} = 0.2553 \) mole fractions of 1-hexene, 1-octene, and 1-decene, respectively) have been simultaneously measured over the temperature range from (298 to 471) K and at pressures up to 196 MPa using a combined method of hydrostatic weighing and falling-body techniques, respectively. The combined expanded uncertainties of the density, pressure, temperature, concentration, and viscosity measurements at the 95% confidence level with a coverage factor of k = 2 are estimated to be (0.15 to 0.30)%, 0.05%, 0.02 K, 0.005 mol%, and (1.5 to 2.0)%, respectively. The measured densities and viscosities were used to calculate the excess molar volumes and viscosity differences. The excess molar properties (\( G_{\text{m}}^{\text{E}} , \, H_{\text{m}}^{\text{E}} , \, S_{\text{m}}^{\text{E}} \) and \( C_{\text{pm}}^{\text{E}} \)) and their pressure derivatives as a function of temperature and pressure have been calculated using the derived excess molar volumes. The measured viscosities were used to develop a theoretically based viscosity correlation model (Arrhenius–Andrade type equation) for the mixture. 相似文献
14.
Krishnan Balasubramanian 《Journal of mathematical chemistry》2017,55(1):195-222
Nested wreath product groups arise from looped or recursive structures that contain repeated copies of the same structure one within the other. Phylogeny trees in biology, Cayley trees, Bethe lattices, NMR graphs of non-rigid molecules, ammoniated ammonium ions are all examples of structures that exhibit such nested wreath product automorphism groups. We show that the conjugacy classes, irreducible representations and character tables of these nested group structures can be generated using multinomial generating functions cast in terms of matrix types that can be simplified into generalized cycle type polynomials. The nested wreath product groups rapidly increase in orders, for example, a simple wreath product group \(\hbox {S}_{7}[\hbox {S}_{7}]\) consists of \((7!)^{8}\) or \(4.1633\times 10^{23}\) operations, 481,890 conjugacy classes, spanning a 481,891 \(\times \) 481,891 character table that would occupy 232,217,972 pages. We have obtained powerful recursive relations for the conjugacy classes, character tables and the orders of various conjugacy cases of any nested wreath product \(\{[\hbox {S}_{\mathrm{n}}]\}^{\mathrm{m}}\) or \(\hbox {S}_{\mathrm{n}}[\hbox {S}_{\mathrm{n}}[\hbox {S}_{\mathrm{n}}{\ldots }.[\hbox {S}_{\mathrm{n}}]]{\ldots }.]\) with order \(\left( {n!}\right) ^{a_m},\,\hbox {a}_{\mathrm{m}}=(\hbox {n}^{\mathrm{m}}-1)/(\hbox {n}-1)\). We have obtained the character tables of phylogenetic trees of any order, character tables of Cayley trees of degrees 3 and 4 and for Cayley trees of larger degrees, we have derived exact analytical expressions for the conjugacy classes and IRs for up to \(\{[\hbox {S}_{7}]\}^{\mathrm{m}}\) with order \((7!)^{137257}\) for \(\hbox {m}=7\). Applications to colorings of phylogenic trees in biology are considered. 相似文献
15.
Gülşah Çifci Viktorya Aviyente E. Demet Akten Gerald Monard 《Journal of computer-aided molecular design》2017,31(6):563-575
In a first step in the discovery of novel potent inhibitor structures for the PDE4B family with limited side effects, we present a protocol to rank newly designed molecules through the estimation of their IC\(_{50}\) values. Our protocol is based on reproducing the linear relationship between the logarithm of experimental IC\(_{50}\) values [\(\log\)(IC\(_{50}\))] and their calculated binding free energies (\(\Delta G_\mathrm{binding}\)). From 13 known PDE4B inhibitors, we show here that (1) binding free energies obtained after a docking process by AutoDock are not accurate enough to reproduce this linear relationship; (2) MM-GB/SA post-processing of molecular dynamics (MD) trajectories of the top ranked AutoDock pose improves the linear relationship; (3) by taking into account all representative structures obtained by AutoDock and by averaging MM-GB/SA computations on a series of 40 independent MD trajectories, a linear relationship between \(\log\)(IC\(_{50}\)) and the lowest \(\Delta G_\mathrm{binding}\) is achieved with \(R^2=0.944\). 相似文献
16.
V. R. Chirumamilla W. F. L. M. Hoeben F. J. C. M. Beckers T. Huiskamp E. J. M. Van Heesch A. J. M. Pemen 《Plasma Chemistry and Plasma Processing》2016,36(2):487-510
In this study, an experimental investigation of the removal of NO from an atmospheric air stream has been carried out with a non-thermal plasma dielectric barrier discharge reactor filled with different catalytic materials. TiO\(_2\), CuO–MnO\(_2\)–TiO\(_2\), CuO–MnO\(_2\)–Al\(_2\)O\(_3\) catalysts were used to study the synergy between the plasma and the catalysts. The NO\(_\mathrm{{x}}\) removal efficiency and by-products formation were studied as a function of energy density, pulse rise time and width using a plasma catalytic configuration. It was observed that the shorter pulses are more efficient for NO\(_\mathrm{{x}}\) removal but at the expense of higher by-products formation such as N\(_2\)O and O\(_3\). A comparison has been made between an in-plasma catalytic configuration and a post-plasma catalytic configuration. Among all the three catalysts that were studied, CuO–MnO\(_2\)–TiO\(_2\) catalyst showed the best performance with respect to the removal efficiency as well as the by-products formation in both the in-plasma and the post-plasma catalytic configuration. In general, the post-plasma configuration showed better results with respect to low by-products formation. 相似文献
17.
Joel Hagman Luigi Gentile Christian Moestrup Jessen Manja Behrens Karl-Erik Bergqvist Ulf Olsson 《Cellulose (London, England)》2017,24(5):2003-2015
We have characterized the dissolved state of microcrystalline cellulose (MCC) in cold alkali [2.0 M NaOH(aq)] solutions using a combination of small angle X-ray (SAXS) and static light scattering (SLS), \(^1\)H NMR, NMR self-diffusion, and rheology experiments. NMR and SAXS data demonstrate that the cellulose is fully molecularly dissolved. SLS, however, shows the presence of large concentration fluctuations in the solution, consistent with significant attractive cellulose-cellulose interactions. The scattering data are consistent with fractal cellulose aggregates of micrometre size having a mass fractal dimension \(D\sim 1.5\). At 25\(\,^{\circ }\mathrm {C}\) the solution structure remains unchanged on the time scale of weeks. However, upon heating the solutions above 35\(\,^{\circ }\mathrm {C}\) additional aggregation occurs on the time scale of minutes. Decreasing or increasing the NaOH concentration away from the “optimum” 2 M also leads to additional aggregation. This is seen as an increase of the SAXS intensity at lower q values. Addition of urea (1.8 and 3.6 M, respectively) does not significantly influence the solution structure. With these examples, we will discuss how scattering methods can be used to assess the quality of solvents for cellulose. 相似文献
18.
Mariela Cuéllar Sabrina N. Vettorelo Patricia I. Ortiz Fernando Garay 《Journal of Solid State Electrochemistry》2016,20(12):3279-3286
The electrocatalytic mechanism of Cr(III) reduction in the presence of diethylenetriaminepentaacetic acid (DTPA) and nitrate ions is studied theoretically and experimentally by using stripping square-wave voltammetry (SWV). Experimental curves are in excellent agreement with theoretical profiles corresponding to a catalytic reaction of second kind. This type of mechanism is equivalent to a CE mechanism, where the chemical reaction produces the electroactive species. Accordingly, the reaction of Cr(III)–H2O–DTPA and \( {\mathrm{NO}}_3^{-} \) would produce the electroactive species Cr(III)–NO3–DTPA and this last species would release \( {\mathrm{NO}}_2^{-} \) to the solution during the electrochemical step. In this regard, the complex of Cr(III)–DTPA would work as the catalyzer that allows the reduction of \( {\mathrm{NO}}_3^{-} \) to \( {\mathrm{NO}}_2^{-} \). Furthermore, it was found that the electrochemical reaction is quite irreversible, with a constant of k s?=?9.4?×?10?5 cm s?1, while the constant for the chemical step has been estimated to be k chem?=?1.3?×?104 s?1. Considering that the equilibrium constant is K?=?0.01, it is possible to estimate the kinetic constants of the chemical reaction as k 1?=?1?×?102 s?1 and k ?1?=?1.29?×?104 s?1. These values of k 1 and k ?1 indicate that the exchange of water molecules by nitrate is fast and that the equilibrium favors the complex with water. Also, a value for the formal potential E°’?≈??1.1 V was obtained. The model used for simulating experimental curves does not consider the adsorption of reactants yet. Accordingly, weak adsorption of reagents should be expected. 相似文献
19.
The effect of 1-alkyl-4-methylpyridinium based ionic liquids on the conductivity behavior of l(+)-lactic acid (LaH) was studied in Poly(ethylene glycol) (PEG) aqueous solutions. The molar conductivities of LaH in the aqueous solutions of PEG, (PEG + 1-hexyl-4-methylpyridinium bromide) and (PEG + 1-octyl-4-methylpyridinium bromide) were measured over the temperature ranges of 288.15–318.15 K. The molar conductivity data were analyzed by applying the Quint–Viallard (QV) conductivity equation to determine the limiting molar conductivities (Λ 0) and dissociation constants (\( K_{\text{D}} \)). The results show that the values of limiting molar conductivity increased as the temperature increased, which indicates that the dissociation process is endothermic. The \( K_{\text{D}} \) values were also used to calculate the dissociation standard thermodynamic functions (\( \Delta G_{\text{D}}^{0} \), \( \Delta S_{\text{D}}^{0} \) and \( \Delta H_{\text{D}}^{0} \)). The results revealed that the dissociation process of LaH is controlled by entropy at all temperatures. 相似文献
20.
Low-lying structures of water cationic clusters and the compounds with the OH radical have become a hot topic in recent years. We here investigate the cluster \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \) and calculate its ideal structures by the quantum chemical calculation together with the particle swarm optimization method. We analyzed the properties of the obtained lower-energy isomers of \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \). Their energies are further re-optimized and demonstrated at three different methods with two basis sets. Based on our numerical calculations, a new cage-like structure of \( {\left({\mathrm{H}}_2\mathrm{O}\right)}_{10}^{+} \) with the lowest energy is obtained at MP2/aug-cc-pVDZ level. Our results showed the comparison of energy order at different conditions and demonstrated the influence of temperature on the relative Gibbs energy and IR spectra. Moreover, we also contained the molecule orbitals to discuss the stability of these representative isomers. 相似文献