THE REDUCTIVE PHOTOALKYLATION OF FLAVIN BY N-ALLYLTHIOUREA

Illumination of flavin in the presence of N-allythiourea (ATU) inhibits catalytic turnover of flavin between its reduced and oxidized redox states by adduct formation, the adduct being no longer reoxidisable by oxygen. The first step in the mechanism of adduct formation is an electron transfer from ATU to flavin in the photoexcited triplet state. In further steps, the ATU radical cation deprotonates, electronic rearrangement occurs and radical combination with the flavosemiquinone follows, yielding a cyclic product in which ATU is added in the 4a- and 5-position to the flavin chromophore.
Reaction rates and yields were determined by flash photolysis and continuous illumination. A photochemical study by variation of the molecular structure of ATU was undertaken to prove the proposed mechanism and to determine the structural requirements of flavin inactivators.     

Synergistic effect of Ni(II) and Co(II) ions on the sulfite induced autoxidation of Cu(II)/tetraglycine complex

The synergistic effect of Ni(II) and Co(II) on the sulfite induced autoxidation of Cu(II)/tetraglycine was investigated spectrophotometrically at 25.0 degrees C, pH = 9.0, 1 x 10(-5) mol dm(-3) < or = [S(IV)] < or = 8 x 10(-5) mol dm(-3), [Cu(II)]= 1 x 10(-3) mol dm(-3), 1 x 10(-6) mol dm(-3) < or = [Ni(II)] or [Co(II)] < or = 1 x 10(-4) mol dm(-3), [O2] approximately 2.5 x 10(-4) mol dm(-3), and 0.1 mol dm(-3) ionic strength. In the absence of added nickel(II) or cobalt(II), the kinetic traces of Cu(III)G4 formation show a large induction period (about 3 h). The addition of trace amounts of Ni(II) or Co(II) increases the reaction rate significantly and the induction period drastically decreases (less than 0.5 s). The effectiveness of Cu(III)G4 formation becomes much higher. The metal ion in the trivalent oxidation state rapidly oxidizes SO3(2-) to SO3*-, which reacts with oxygen to produce SO5*-. The strongly generated oxidants oxidize Cu(II)G4 to Cu(III).     

DNA damage by sulfite autoxidation catalyzed by cobalt complexes

DNA damage was investigated in the presence of sulfite, dissolved oxygen and cobalt(II) complexes with glycylglycylhistidine, glycylhistidyllysine, glycylglycyltyrosylarginine and tetraglycine. These studies indicated that only Co(II) complexed with glycylglycylhistidine (GGH) induced DNA strand breaks at low sulfite concentrations (1-80 microM) via strong oxidants formed in the reaction. In the presence of the other complexes, some damage occurred only in the presence of high sulfite concentrations (0.1-2.0 mM) after incubation for 4 h. In the presence of GGH, Co(II) and dissolved O2, DNA damage must involve a reactive high-valent cobalt complex. The damaging effect was increased by adding S(IV), due to the oxysulfur radicals formed as intermediates in S(IV) autoxidation catalyzed by the complex. SO3 -, HO and H radicals were detected by EPR-spin trapping experiments with DMPO (5,5-dimethyl-1-pyrroline N-oxide). The results indicate that Co(II) binds O2 in the presence of GGH, and leads to the formation of a DMPO-HO adduct without first forming free superoxide or hydroxyl radical, supporting the participation of a reactive high-valent cobalt complex.     

Interaction of Al2O3 and CeO2 surfaces with SO2 and SO2 + O2 studied by X-ray photoelectron spectroscopy

The interaction of Al2O3 and CeO2 thin films with sulfur dioxide (2.5 mbar) or with mixtures of SO2 with O2 (5 mbar) at various temperatures (30-400 degrees C) was studied by X-ray photoelectron spectroscopy (XPS). The analysis of temperature-induced transformations of S2p spectra allowed us to identify sulfite and sulfate species and determine the conditions of their formation on the oxide surfaces. Sulfite ions, SO3(2-), which are characterized by the S2p(3/2) binding energy (BE) of approximately 167.5 eV, were shown to be formed during the interaction of the oxide films with pure SO2 at temperatures < or =200 degrees C, whereas sulfate ions, SO4(2-), with BE (S2p(3/2)) approximately 169 eV were produced at temperatures > or =300 degrees C. The formation of both the sulfite and sulfate species proceeds more efficiently in the case of CeO2. The addition of oxygen to SO2 suppresses the formation of the sulfite species on both oxides and facilitates the formation of the sulfate species. Again, this enhancement is more significant for the CeO2 film than for the Al2O3 one. The sulfation of the CeO2 film is accompanied by a reduction of Ce(IV) ions to Ce(III) ones, both in the absence and in the presence of oxygen. It has been concluded that the amount of the sulfates on the CeO2 surface treated with the SO2 + O2 mixture at > or =300 degrees C corresponds to the formation of a 3D phase of the Ce(III) sulfate. The sulfation of Al2O3 is limited by the surface of the oxide film.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

The fidelity of spin trapping with DMPO in biological systems

Unlike direct ESR, spin trap methodology depends on the absolute fidelity of the spin trap reaction. Two alternative reactions of 5,5-dimethyl-1-pyrroline N-oxide (DMPO) leading to radical adduct artifacts have been discovered and investigated: inverted spin trapping and the Forrester-Hepburn nucleophilic mechanism. These two alternate pathways to radical adducts are a combination of one-electron oxidation and nucleophilic addition, in either order. In biological systems, serious artifacts have been reported due to the Forrester-Hepburn mechanism, which is initiated by the addition of a nucleophile to DMPO. It has recently been demonstrated that (bi)sulfite (hydrated sulfur dioxide) can react with DMPO via a nonradical, nucleophilic reaction, and it has been further proposed that DMPO/(?)SO(3)(-) formation in biological systems is an artifact and not the result of spin trapping of sulfur trioxide anion radical ((?)SO(3)(-)). The one-electron oxidation of (bi)sulfite catalyzed by horseradish peroxidase (HRP)/hydrogen peroxide (H(2)O(2)) has been reinvestigated by ESR spin trapping with DMPO and oxygen uptake studies to obtain further evidence for the radical reaction mechanism. In the absence of DMPO, the initial rate of (bi)sulfite-dependent oxygen and H(2)O(2) consumption was determined to be half of the initial rate of DMPO/(?)SO(3)(-) radical adduct formation as determined by ESR, demonstrating that, under our experimental conditions, DMPO exclusively forms the radical adduct by trapping the (?)SO(3)(-).     

Kinetics and mechanism of the oxidation of sulfite by chlorine dioxide in a slightly acidic medium

The sulfite-chlorine dioxide reaction was studied by stopped-flow method at I = 0.5 M and at 25.0 +/- 0.1 degrees C in a slightly acidic medium. The stoichiometry was found to be 2 SO(3)(2-) + 2.ClO(2) + H(2)O --> 2SO(4)(2) (-) + Cl(-) + ClO(3)(-) + 2H(+) in *ClO(2) excess and 6SO(3)(2-) + 2*ClO(2) --> S(2)O(6)(2-) + 4SO(4)(2-) + 2Cl(-) in total sulfite excess ([S(IV)] = [H(2)SO(3)] + [HSO(3)(-)] + [SO(3)(2-)]). A nine-step model with four fitted kinetic parameters is suggested in which the proposed adduct *SO(3)ClO(2)(2-) plays a significant role. The pH-dependence of the kinetic traces indicates that SO(3)(2-) reacts much faster with *ClO(2) than HSO(3)(-) does.     

Flavin-catalyzed generation of diimide: an environmentally friendly method for the aerobic hydrogenation of olefins

The first green and practical method for "aerobic hydrogenation" involving the use of hydrazine and an organocatalyst is described. Olefins can be hydrogenated by treatment with hydrazine in the presence of a 5-ethyl-3-methyllumiflavinium perchlorate (FlEt+.ClO4-) catalyst under O2 atmosphere to give the corresponding hydrogenated products in excellent yields along with environmentally benign water and molecular nitrogen as the only waste products.     

Novel Mn(II)Mn(III)Mn(II) trinuclear complexes with carbohydrate bridges derived from seven-coordinate manganese(II) complexes with N-glycoside

Reactions of MnX2.nH2O with tris(N-(D-mannosyl)-2-aminoethyl)amine ((D-Man)3-tren), which was formed from D-mannose and tris(2-aminoethyl)amine (tren) in situ, afforded colorless crystals of [Mn((D-Man)3-tren)]X2 (3a, X = Cl; 3b, X = Br; 3c, X = NO3; 3d, X = 1/2SO4). The similar reaction of MnSO4.5H2O with tris(N-(L-rhamnosyl)-2-aminoethyl)amine ((L-Rha)3-tren) gave [Mn((L-Rha)3-tren)]SO4 (4d), where L-rhamnose is 6-deoxy-L-mannose. The structures of 3b and 4d were determined by X-ray crystallography to have a seven-coordinate Mn(II) center ligated by the N-glycoside ligand, (aldose)3-tren, with a C3 helical structure. Three D-mannosyl residues of 3b are arranged in a delta(ob3) configuration around the metal, leading to formation of a cage-type sugar domain in which a water molecule is trapped. In 4d, three L-rhamnosyl moieties are in a delta(lel3) configuration to form a facially opened sugar domain on which a sulfate anion is capping through hydrogen bonding. These structures demonstrated that a configurational switch around the seven-coordinate manganese(II) center occurs depending on its counteranion. Reactions of 3a, 3b, and 4d with 0.5 equiv of Mn(II) salt in the presence of triethylamine yielded reddish orange crystals formulated as [[Mn((aldose)3-tren)]2Mn(H2O)X3.nH2O (5a, aldose = D-Man, X = Cl; 5b, aldose = D-Man, X = Br; 6d, aldose = L-Rha, X = 1/2SO4). The analogous trinuclear complexes 6a (aldose = L-Rha, X = Cl), 6b (aldose = L-Rha, X = Br), and 6c (aldose = L-Rha, X = NO3) were prepared by the one-pot reaction of Mn(II) salts with (L-Rha)3-tren without isolation of the intermediate Mn(II) complexes. X-ray crystallographic studies revealed that 5a, 5b, 6c, and 6d have a linearly ordered trimanganese core, Mn(II)Mn(III)Mn(II), bridged by two carbohydrate residues with Mn-Mn separations of 3.845(2)-3.919(4) A and Mn-Mn-Mn angles of 170.7(1)-173.81(7) degrees. The terminal Mn(II) atoms are seven-coordinate with a distorted mono-face-capped octahedral geometry ligated by the (aldose)3-tren ligand through three oxygen atoms of C-2 hydroxyl groups, three N-glycosidic nitrogen atoms, and a tertiary amino group. The central Mn(III) atoms are five-coordinate ligated by four oxygen atoms of carbohydrate residues in the (aldose)3-tren ligands and one water molecule, resulting in a square-pyramidal geometry. In the bridging part, a beta-aldopyranosyl unit with a chair conformation bridges the two Mn(II)Mn(III) ions with the C-2 mu-alkoxo group and with the C-1 N-glycosidic amino and the C-3 alkoxo groups coordinating to each metal center. These structures could be very useful information in relation to xylose isomerases which promote aldose-ketose isomerization by using divalent dimetal centers such as Mn2+, Mg2+, and Co2+.     

Light-induced metastable linkage isomers of ruthenium sulfur dioxide complexes

The irradiation of ruthenium-sulfur dioxide complexes of general formula trans-[Ru(II)(NH(3))(4)(SO(2))X]Y with laser light at low temperature results in linkage isomerization of SO(2), starting with eta(1)-planar S-bound to eta(2)-side S,O-bound SO(2). The solid-state photoreaction proceeds with retention of sample crystallinity. Following work on trans-[Ru(NH(3))(4)Cl(eta(1)-SO(2))]Cl and trans-[Ru(NH(3))(4)(H(2)O)(eta(1)-SO2)](C(6)H(5)SO(3))(2) (Kovalevsky, A. Y.; Bagley, K. A.; Coppens, P. J. Am. Chem. Soc. 2002, 124, 9241-9248), we describe photocrystallographic, IR, DSC, and theoretical studies of trans-[Ru(II)(NH(3))(4)(SO(2))X]Y complexes with (X = Cl(-), H(2)O, or CF(3)COO(-) (TFA(-))) and a number of different counterions (Y = Cl(-), C(6)H(5)SO(3)(-), Tos(-), or TFA(-)). Low temperature IR experiments indicate the frequency of the asymmetric and symmetric stretching vibrations of the Ru-coordinated SO(2) to be downshifted by about 100 and 165 cm(-1), respectively. Variation of the trans-to-SO(2) ligand and the counterion increases the MS2 decay temperature from 230 K (trans-[Ru(II)(NH(3))(4)(SO(2))Cl]Cl) to 276 K (trans-[Ru(II)(NH(3))(4)(SO(2))(H(2)O)](Tos)(2)). The stability of the MS2 state correlates with increasing sigma-donating ability of the trans ligand and the size of the counterion. Quantum chemical DFT calculations indicate the existence of a third eta(1)-O-bound (MS1) isomer, the two metastable states being 0.1-0.6 eV above the energy of the ground-state complex.     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.     

Catalyzed Autoxidation of Hydrogensulfite by Cobalt(II) (2,3,9,10-tetramethyl-1,4,8,11-tetraaza-cyclotetradeca-1,3,8,10-tetraene) (H 2 O) 2 2+

The catalytic autoxidation of hydrogensulfite (hydrogentrioxosulfate(1-)) in the presence of Co(tim)(H 2 O) 2 2+ (tim=2,3,9,10-tetramethyl-1,4,8,11-tetraazacyclotetradeca-1,3,8,10-tetraene) was studied. Dioxygen reacts with excess sulfite in the presence of Co(tim)(H 2 O) 2 2+ in a complex process (a minimum of five kinetic steps can be identified) to produce Co(tim)(SO 3 ) x (3 m 2 x )+ ( x =1 or 2) ( u max at 350 nm) and sulfate. Seventy turnovers over 4 h were attained in a system where dioxygen and sulfite were supplied constantly. The Co(III) product formed reacts only slowly with dioxygen to produce sulfate. A mechanistic analysis of the results implies the involvement of a Co(tim)-dioxygen adduct, stabilized by an axial sulfite ligand.     

Novel 3D, 2D, and 0D first-row coordination compounds with 4,4'-bipyridine-N,N'-dioxide incorporating sulfur-containing anions

The reaction of M(S2O6) (M = Cu(II), Ni(II), and Co(II)) with 4,4'-bipyridine-N,N'-dioxide (bpdo) results in the formation of novel 3D, 2D, and mononuclear complexes. Complex 1, {[Cu(H2O)(bpdo)2](S2O6)(H2O)}n, is a 2-D wavelike polymer with the Cu(II) ion located on a 2-fold axis and having a distorted square-pyramidal coordination sphere. With Co(II) and Ni(II), 3-D complexes, {[M(bpdo)3](S2O6)(C2H5OH)7}n [M = Co(II) (2), Ni(II) (3)], were obtained. The metal atoms are situated on centers of symmetry and have octahedral environments coordinated to six bpdo molecules. The same reaction in aqueous solution with a metal/ligand ratio of 1:1 results in the formation of mononuclear complexes, {[M(bpdo)(H2O)5](SO4)(H2O)2} [M = Co(II) (4), Ni(II) (5)], accompanied by the decomposition of the dithionate anions S2O6(2-) to sulfate anions SO4(2-).     

3d-Metal derivatives of the [Cu(I)(SO3)4]7- ion: structure and magnetism

The Cu(SO(3))(4)(7-) anion, which consists of a tetrahedrally coordinated Cu(I) centre coordinated to four sulfur atoms, is able to act as a multidentate ligand in discrete and infinite supramolecular species. The slow oxidation of an aqueous solution of Na(7)Cu(SO(3))(4) yields a mixed oxidation state, 2D network of composition Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O. The addition of Cu(II) and 2,2'-bipyridine to an aqueous Na(7)Cu(SO(3))(4) solution leads to the formation of a pentanuclear complex of composition {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(+); a combination of hydrogen bonding and π-π stacking interactions leads to the generation of infinite parallel channels that are occupied by disordered nitrate anions and water molecules. A pair of Cu(SO(3))(4)(7-) anions each act as a tridentate ligand towards a single Mn(II) centre when Mn(II) ions are combined with an excess of Cu(SO(3))(4)(7-). An anionic pentanuclear complex of composition {[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)} is formed when Fe(II) is added to a Cu(+)/SO(3)(2-) solution. Hydrated ferrous [Fe(H(2)O)(6)(2+)] and sodium ions act as counterions for the complexes and are responsible for the formation of an extensive hydrogen bond network within the crystal. Magnetic susceptibility studies over the temperature range 2-300 K show that weak ferromagnetic coupling occurs within the Cu(II) containing chains of Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O, while zero coupling exists in the pentanuclear cluster {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(NO(3))·H(2)O. Weak Mn(II)-O-S-O-Mn(II) antiferromagnetic coupling occurs in Na(H(2)O)(6){[Cu(I)(SO(3))(4)][Mn(II)(H(2)O)(2)](3)}, the latter formed when Mn was in excess during synthesis. The compound, Na(3)(H(2)O)(6)[Fe(II)(H(2)O)(6)](2){[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)}·H(2)O, contained trace magnetic impurities that affected the expected magnetic behaviour.     

Fast O2 binding at dicopper complexes containing Schiff-base dinucleating ligands

A new family of dicopper(I) complexes [CuI2RL](X)2 (R=H, 1X, R=tBu, 2X and R=NO2, 3X, X=CF3SO3, ClO4, SbF6, or BArF, BArF=[B{3,5-(CF3)2C6H3}4]-), where RL is a Schiff-base ligand containing two tridentate binding sites linked by a xylyl spacer, has been prepared and characterized, and its reaction with O2 has been studied. The complexes were designed with the aim of reproducing structural aspects of the active site of type 3 dicopper proteins; they contain two three-coordinate copper sites and a rather flexible podand ligand backbone. The solid-state structures of 1ClO4, 2CF3SO3, 2ClO4, and 3BArF.CH3CN have been established by single-crystal X-ray diffraction analysis. 1ClO4 adopts a polymeric structure in the solid state while 2CF3SO3, 2ClO4, and 3BArF.CH3CN are monomeric. The complexes have been studied in solution by means of 1H and 19F NMR spectroscopy, which put forward the presence of dynamic processes. 1-3BArF and 1-3CF3SO3 in acetone react rapidly with O2 to generate metaestable [CuIII2(mu-O)2(RL)]2+ 1-3(O2) and [CuIII2(mu-O)2(CF3SO3)(RL)]+ 1-3(O2)(CF3SO3) species, respectively, that have been characterized by UV-vis spectroscopy and resonance Raman analysis. Instead, reaction of 1-3BArF with O2 in CH2Cl2 results in intermolecular O2 binding. DFT methods have been used to study the chemical identities and structural parameters of the O2 adducts, and the relative stability of the CuIII2(mu-O)2 form with respect to the CuII2(mu-eta2:eta2-O2) isomer. The reaction of 1X, X = CF3SO3 and BArF, with O2 in acetone has been studied by stopped-flow UV-vis exhibiting an unexpected very fast reaction rate (k=3.82(4)x10(3) M-1 s-1, DeltaH=4.9+/-0.5 kJ.mol-1, DeltaS=-148+/-5 J.K-1.mol-1), nearly 3 orders of magnitude faster than in the parent [CuI2(m-XYLMeAN)]2+. Thermal decomposition of 1-3(O2) does not result in aromatic hydroxylation. The mechanism and kinetics of O2 binding to 1X (X=CF3SO3 and BArF) are discussed and compared with those associated with selected examples of reported models of O2-processing copper proteins. A synergistic role of the copper ions in O2 binding and activation is clearly established from this analysis.     

pH-dependence of the aqueous electrochemistry of the two-electron reduced alpha-[Mo18O54(SO3)] sulfite Dawson-like polyoxometalate anion derived from its triethanolammonium salt

The electrochemistry of the Dawson-like sulfite polyoxometalate anion alpha-[Mo18O54(SO3)2]6-, derived from the TEAH6{alpha-[Mo18O54(SO3)2]} salt (TEAH+ is the triethanolammonium cation; pKa=7.8), has been investigated in aqueous media using cyclic and rotated disk voltammetry at glassy carbon electrodes and bulk electrolysis, with a focus on the pH-dependence for oxidation to alpha-[Mo18O54(SO3)2]4-. In buffered media at pH>or=4, the cyclic voltammetric response for alpha-[Mo18O54(SO3)2]6- reveals two partially resolved one-electron oxidation processes corresponding to the sequential generation of alpha-[Mo18O54(SO3)2]5- and alpha-[Mo18O54(SO3)2]4-. At lower pH, using electrolytes containing sulfuric acid, the two waves coalesce but the individual apparent E0' reversible formal potential values for the two processes can be extracted down to pH 2 by assuming that reversible protonation accompanies fast electron transfer. The results for 2相似文献   

Theoretical and experimental studies of the spin trapping of inorganic radicals by 5,5-dimethyl-1-pyrroline N-oxide (DMPO). 3. Sulfur dioxide, sulfite, and sulfate radical anions

Radical forms of sulfur dioxide (SO(2)), sulfite (SO(3)(2-)), sulfate (SO(4)(2-)), and their conjugate acids are known to be generated in vivo through various chemical and biochemical pathways. Oxides of sulfur are environmentally pervasive compounds and are associated with a number of health problems. There is growing evidence that their toxicity may be mediated by their radical forms. Electron paramagnetic resonance (EPR) spin trapping using the commonly used spin trap, 5,5-dimethyl-1-pyrroline N-oxide (DMPO), has been employed in the detection of SO(3)(?-) and SO(4)(?-). The thermochemistries of SO(2)(?-), SO(3)(?-), SO(4)(?-), and their respective conjugate acids addition to DMPO were predicted using density functional theory (DFT) at the PCM/B3LYP/6-31+G**//B3LYP/6-31G* level. No spin adduct was observed for SO(2)(?-) by EPR, but an S-centered adduct was observed for SO(3)(?-)and an O-centered adduct for SO(4)(?-). Determination of adducts as S- or O-centered was made via comparison based on qualitative trends of experimental hfcc's with theoretical values. The thermodynamics of the nonradical addition of SO(3)(2-) and HSO(3)(-) to DMPO followed by conversion to the corresponding radical adduct via the Forrester-Hepburn mechanism was also calculated. Adduct acidities and decomposition pathways were investigated as well, including an EPR experiment using H(2)(17)O to determine the site of hydrolysis of O-centered adducts. The mode of radical addition to DMPO is predicted to be governed by several factors, including spin population density, and geometries stabilized by hydrogen bonds. The thermodynamic data supports evidence for the radical addition pathway over the nucleophilic addition mechanism.     

Electronic and photophysical properties of adducts of [Ru(bpy)3]2+ and Dawson-type sulfite polyoxomolybdates α/β-[Mo18O54(SO3)2]4-

The spectroscopic and photophysical properties of [Ru(bpy)(3)](2)[[Mo(18)O(54)(SO(3))(2)], where bpy is 2,2'-bipyridyl and [Mo(18)O(54)(SO(3))(2)](4-) is either the α or β-sulfite containing polyoxomolybdate isomer, have been measured and compared with those for the well known but structurally distinct sulfate analogue, α-[Mo(18)O(54)(SO(4))(2)](4-). Electronic difference spectroscopy revealed the presence of new spectral features around 480 nm, although they are weak in comparison with the [Ru(bpy)(3)](2)[Mo(18)O(54)(SO(4))(2)] analogue. Surprisingly, Stern-Volmer plots of [Ru(bpy)(3)](2+) luminescence quenching by the polyoxometallate revealed the presence of both static and dynamic quenching for both α and β-[Mo(18)O(54)(SO(3))(2)](4-). The association constant inferred for the ion cluster [Ru(bpy)(3)](2)α-[Mo(18)O(54)(SO(4))(2)] is K = 5.9 ± 0.56 × 10(6) and that for [Ru(bpy)(3)](2)β-[Mo(18)O(54)(SO(4))(2)] is K = 1.0 ± 0.09 × 10(7). Unlike the sulfate polyoxometalates, both sulfite polyoxometalate-ruthenium adducts are non-luminescent. Despite the strong electrostatic association in the adducts resonance Raman and photoelectrochemical studies suggests that unlike the sulfato polyoxometalate analogue there is no sensitization of the polyoxometalate photochemistry by the ruthenium centre for the sulfite anions. In addition, the adducts exhibit photochemical lability in acetonitrile, attributable to decomposition of the ruthenium complex, which has not been observed for other [Ru(bpy)(3)](2+) -polyoxometalate adducts. These observations suggest that less electronic communication exists between the [Ru(bpy)(3)](2+) and the sulfite polyoxoanions relative to their sulfate polyoxoanion counterparts, despite their structural and electronic analogy. The main distinction between sulfate and sulfite polyoxometalates lies in their reversible reduction potentials, which are more positive by approximately 100 mV for the sulfite anions. This suggests that the capacity for [Ru(bpy)(3)](2+) or analogues to sensitize photoreduction in the adducts of polyoxometalates requires very sensitive redox tuning.     

Hemilabile and reversible carbon monoxide binding properties of iron(II), cobalt(II) and nickel(II) complexes containing a new tridentate P-S-N ligand

Several first-row transition metal complexes of the formulation [M(1)(2)](X)(2) {where 1 = Ph(2)PCH(2)CH(2)S(2-C(6)H(4)NH(2)); M = Fe(II), X = BF(4)(-) (2); M = Co(II), X = BF(4)(-) (3), Ni(II), X = ClO(4)(-) (4)} have been prepared by reaction of two equivalents of the new P-S-N ligand Ph(2)PCH(2)CH(2)S(2-C(6)H(4)NH(2)) 1 with one equivalent of the appropriate [M(OH(2))(6)](X)(2) precursor in acetonitrile. In the solid state, complexes 2-4 exist as distorted centrosymmetric octahedral structures featuring facially capping ligands in an all-trans arrangement. Reaction of 2 and 3 with a stream of carbon monoxide (1 atm.) for 5 min in acetonitrile generates iron(II) monocarbonyl species of formulation [Fe(CO)(1)(2)](BF(4))(2)2a, and a cobalt(II) dicarbonyl complex, [Co(CO)(2)(1)(2)](BF(4))(2)3a, which can be isolated in the solid state. Complete removal of CO is achieved by either heating to reflux samples of 2a in acetonitrile for 5 min or by heating solid samples of 3a at 120 °C in vacuo over a period of 4 h. The binding of carbon monoxide is fully reversible for 2 and 3 and can be repeated over multiple cycles. When the same trapping reactions were carried out with very low radiochemical (11)CO concentrations, metal carbonyl species were no longer formed. It is likely that the kinetics of (11)CO adduct formation are too slow to allow for effective trapping under the applied radiochemical conditions.     

Synthesis of neutral (Pd(II), Pt(II)), cationic (Pd(II)), and water-induced anionic (Pd(II)) complexes containing new mesocyclic thioether-aminophosphonite ligands and their application in the Suzuki cross-coupling reaction

Mesocyclic thioether-aminophosphonite ligands, {-OC10H6(mu-S)C10H6O-}PNC4H8O (2a, 4-(dinaphtho[2,1-d:1',2'-g][1,3,6,2]dioxathiaphosphocin-4-yl)morpholine) and {-OC10H6(mu-S)C10H6O-}PNC4H8NCH3 (2b, 1-(dinaphtho[2,1-d:1',2'-g][1,3,6,2]dioxathiaphosphocin-4-yl)-4-methylpiperazine) are obtained by reacting {-OC10H6(mu-S)C10H6O-}PCl (1) with corresponding nucleophiles. The ligands 2a and 2b react with (PhCN)2PdCl2 or M(COD)Cl2 (M = Pd(II) or Pt(II)) to afford P-coordinated cis-complexes, [{(-OC10H6(mu-S)C10H6O-)PNC4H8X-kappaP}2MCl2] (3a, M = Pd(II), X = O; 3b, M = Pd(II), X = NMe; 4a, M = Pt(II), X = O; 4b, M = Pt(II), X = NMe). Compounds 2a and 2b, upon treatment with [Pd(eta3-C3H5)Cl]2 in the presence of AgOTf, produce the P,S-chelated cationic complexes, [{(-OC10H6(mu-S)C10H6O-)PNC4H8X-kappaP,kappaS}Pd(eta3-C3H5)](CF3SO3) (5a, X = O and 5b, X = NMe). Treatment of 2a and 2b with (PhCN)2PdCl2 in the presence of trace amount of H2O affords P,S-chelated anionic complexes, [{(-OC10H6(mu-S)C10H6O-)P(O)-kappaP,kappaS}PdCl2](H2NC4H8X) (6a, X = O and 6b, X = NMe), via P-N bond cleavage. The crystal structures of compounds 1, 2a, 2b, 4a, and 6a are reported. Compound 6a is a rare example of crystallographically characterized anionic transition metal complex containing a thioether-phosphonate ligand. Most of these palladium complexes proved to be very active catalysts for the Suzuki-Miyaura reaction with excellent turnover number ((TON), up to 9.2 x 10(4) using complex 6a as a catalyst).