Determination of fenfluramine enantiomers in pharmaceutical formulations by capillary zone electrophoresis

Summary Capillary zone electrophoresis has been used for the enantiomeric separation of racemic ortho-fenfluramine and meta-fenfluramine employing a phosphate buffer at pH 2.5 added with cyclodextrins. The cyclodextrin type and concentration strongly influenced the chiral resolution. The uncharged β-cyclodextrin polymer gave enantiomeric resolution of both ortho and meta isomers, while γ-cyclodextrin was a good chiral selector for only ortho-fenfluramine; heptakis-2,3,6-tri-O-methyl-β-cyclodextrin permitted base line separation of meta-fenfluramine enantiomers but only partial resolution of racemic ortho-fenfluramine. The optimized electrophoretic method was applied to the quantitative analysis of 1-meta-fenfluramine (minor component in the mixture) and d-meta-fenfluramine in a commercial pharmaceutical formulation. Good reproducibility for migration time and corrected peak areas (R.S.D. <0.8 % and <1.2 %, respectively) was achieved and the presence of the minor component of the mixture was found to be in accord to previous determinations performed by other analytical methods.     

Separation of binaphthyl enantiomers by capillary zone electrophoresis and electrokinetic chromatography

The capillary electrophoretic (CE) separation of the enantiomers of three binaphthyl compounds is investigated. Several CE modes such as cyclodextrin (CD) modified capillary zone electrophoresis (CZE) (CD-CZE), micellar electrokinetic chromatography (MEKC), cyclodextrin electrokinetic chromatography (CD-EKC), etc. are employed for the simultaneous enantiomer separation of the three solutes. The successful separation was achieved by combining two modes, in other words by using more than two chiral selectors. A development of the CE enantiomer separation is demonstrated for the binaphthyl compounds. The enantioselectivity of binaphthyl compounds is alo briefly discussed.     

Determination of piribedil in pharmaceutical formulations by micellar electrokinetic capillary chromatography

A fast and simple micellar electrokinetic capillary chromatographic method was developed for the analysis of piribedil in pharmaceutical formulations. The effects of buffer concentration, buffer pH, sodium dodecyl sulphate (SDS) concentration, organic modifier, applied voltage and injection time were investigated. Optimum results were obtained with a 50 mM borate buffer at pH 8.0 containing 50 mM SDS by using a fused silica capillary (50 m internal diameter, 72 cm effective length). The sample was injected hydrodynamically for 4 s at 50 mbar pressure and the applied voltage was +30 kV. The detection wavelength was set at 205 nm. Diflunisal was used as an internal standard. The analysis was performed at 25 °C and the total run time was 14 min. The method was suitably validated with respect to linearity range, limit of detection and quantification, precision, accuracy, specificity and robustness. The linear calibration range was 5–100 g mL^–1 and the limit of detection was determined as 1 g mL^–1. The method developed was successfully applied to the determination of piribedil in pharmaceutical formulations. The results were compared with a spectrophotometric method reported in the literature and no significant difference was found statistically.     

Chiral separation of highly negatively charged enantiomers by capillary electrophoresis

The separation of two highly negatively charged enantiomeric organic disulfates containing two chiral centers was investigated by capillary electrophoresis using cyclodextrin based chiral selectors added to the run buffer. The optimum separation for the enantiomers was achieved in less than 3 min at 25 degrees C with a run buffer of 10 mM glycine pH 2.4 and 5 mM QA-beta-CD, which is a positively charged quaternary ammonium beta-cyclodextrin derivative. The method resulted in baseline resolution, excellent linearity, and highly reproducible migration times allowing facile evaluation of the enantiomeric purity of the individual isomers. Detection limits for the enantiomeric pair were determined to be 0.3 ng/microl (S/N = 3). The nature of the selector-enantiomer interaction and a quantitative measurement of the apparent stability constants that governed chiral discrimination of the enantiomers with QA-beta-CD were also investigated by UV-Vis spectroscopy and electrospray ionization mass spectrometry.     

Separation of enantiomers of butorphanol and cycloamine by capillary zone electrophoresis

Butorphanol tartrate is a synthetic opioid agonist-antagonist used as analgesic, possessing three chiral centres in the basic part of the molecule. Its chiral purity is routinely controlled only by optical rotation. A new capillary zone electrophoresis method, capable to separate the enantiomers of butorphanol and intermediate of its synthesis, cycloamine, was developed. Different electrolyte composition (type and concentration of carrier ion, pH, and organic solvent addition), and type and concentration of several chiral selectors (natural and modified cyclodextrins) were tested. Using the optimized conditions (acidic electrolyte with the addition of highly sulphated gamma-cyclodextrin) as low as 0.05% of undesirable enantiomers can be detected. Selected method characteristics, i.e., linearity (0-50 mg/l), precision (2.5% at 20 mg/l), and accuracy (101 +/- 2% at 20 mg/l) were evaluated. The optimized method was applied for the analysis of real batches of butorphanol and cycloamine. It was found that butorphanol tartrate manufactured by IVAX Pharmaceuticals contains less than 0.05% of undesirable enantiomer.     

Enantiomeric analysis of rivastigmine in pharmaceuticals by cyclodextrin-modified capillary zone electrophoresis

Chiral separation method development is usually very time-consuming due to the diversity in chemical structures of pharmaceutical drug substances as well as the suitable separation conditions and the problem to choose the appropriate chiral selector. This paper shows capillary zone electrophoresis (CZE) which was developed for chiral separation of a basic compound - rivastigmine (RIV) using 30 cm × 50 μm i.d. polyacrylamide (PAA)-coated fused-silica capillary (effective length 20 cm), amine-modified phosphate buffer of pH 2.5 and sulfated-β-CD (S-β-CD) as chiral selector. Other selected native or derivatized cyclodextrins (CDs) were also tested: β-CD (5, 30 mM), carboxymethyl-β-CD (5, 30 mM), dimethyl-β-CD (15 mM), hydroxypropyl-β-CD (5, 30 mM), hydroxypropyl-α-CD (5, 30 mM) and hydroxypropyl-γ-CD (5, 30 mM). Complete enantiomeric separation of RIV was achieved at 20 kV, 18 °C and detection at 200 nm within 8 min with R.S.D. for the absolute migration time reproducibility of less than 2.1%. Rectilinear calibration range was 5.0-500.0 μM of each enantiomer (r = 0.9994-0.9995). The CZE method proposed was used for the control of chiral purity of pharmaceutically active S-RIV and for the analysis of Exelon caps preparation.     

Contemporary chiral simulators for capillary zone electrophoresis

For separation of enantiomers in presence of a chiral selector, data obtained with the 1D dynamic simulators SIMUL5complex and GENTRANS are compared to data predicted by PeakMaster 6, a recently released generalized model of the linear theory of electromigration. Four electrophoretic systems with stereoisomers of weak bases were investigated. They deal with the estimation of input data for complexation together with the elucidation of the origin of observed system peaks, the interference of analyte and system peak migration, the change of enantiomer migration order as function of the selector concentration and the inversion of analyte migration direction in presence of a multiply negatively charged selector. For all systems, data predicted with PeakMaster 6 are in agreement with those of the dynamic simulators and simulation data compare well with experimental data that were monitored with setups featuring conductivity and/or UV absorbance detection along the capillary. SIMUL5complex and GENTRANS provide the full dynamics of any buffer and sample arrangement and require very long execution time intervals. PeakMaster 6 is restricted to conventional CZE, is based on an approximate solution of the transport equations, provides data for realistic experimental conditions within seconds and represents a practical tool for an experimentalist.     

Use of vancomycin as chiral selector in capillary electrophoresis. Optimization and quantitation of loxiglumide enantiomers in pharmaceuticals

Vancomycin has been used as chiral selector for the enantiomers separation of D, L-loxiglumide, a new drug proposed for the treatment of gastrointestinal pathology. The chiral selector, dissolved at very low concentration in the running buffer, filled only part of the capillary (polyacrylamide coated) and allowed chiral resolution in less than 12 min using a 50 mM phosphate buffer at pH 6. The partial separation technique allowed to obtain a detection limit of 0.5 μg/ml for each enantiomer avoiding the drop in sensitivity due to the strong UV absorption of vancomycin when present in the detector path. The effects of vancomycin concentration and buffer pH on enantiomers resolution have been studied in order to find the optimum experimental conditions for the chiral purity control of drug. The optimized method, using the internal standard, showed good reproducibility for both migration times and normalized peak area ratio and for linearity. Under the studied operating conditions it was possible to detect 0.2 % (w/w) of L-loxiglumide as a chiral impurity. Analysis of pharmaceutical preparations of D-loxiglumide did not reveal the presence of the impurity (L-isomer).     

毛细管区带电泳法测定消毒剂中三氯新

建立了消毒剂中三氯新的毛细管电泳分析方法。探讨了缓冲介质和电泳参数对三氯新测定的影响。以15mmol/LNa2HPO4(pH6.0)-乙腈(V(Na2HPO4)∶V(乙腈)=50∶50)为电泳缓冲液,三氯新在12kV电压下电泳,于254nm检测波长处测定,6min可以完成分析。本方法的检出限为0.04mg/L,线性范围0.04～2.00mg/mL(r=0.997),加标回收率在90.9%～108.2%范围内,测定值的相对标准偏差分别为峰高7.7%,迁移时间5.5%。将本法与高效液相色谱法进行比较,样品测定结果的相对误差小于10%。将所建立的方法已用于消毒剂样品中三氯新的测定。     

毛细管区带电泳法测定粉针剂中头孢拉定的含量

用毛细管区带电泳法测定头孢拉定的含量 ,未涂层毛细管柱 (75 μm×48.5cm ,有效长度 40cm) ,电压 2 8kV ,检测波长 2 3 0nm ,温度 2 0℃ ,进样 5×1 0 3Pa× 3s。运行缓冲液为 2 5mmol/L硼砂缓冲液。方法的线性范围 3 1 .2 2μg/mL～ 749.2 8μg/mL ,检测限为 1 .1 7μg/mL。     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Determination of organic acid drug counter-ions by capillary electrophoresis

Summary A capillary electrophoresis method is described for the novel application of quantifying levels of the simple organic acid counter-ions of a variety of basic drugs. These counter-ions are organic acids such as succinic and maleic. The method uses indirect UV detection and an electroosmotic flow modifier. Acceptable precision and detector linearity were obtained using internal standards. Method validation was completed and acceptable data was generated. The method is now in routine use for this type of testing.     

Separation of the enantiomers of four chiral drugs by neutral cyclodextrin-mediated capillary zone electrophoresis

Summary Neutral cyclodextrin (CD)-modified capillary zone electrophoresis (CZE) has been applied to the chiral separation of four basic drugs— clorprenaline, benzhexol, esmolol and terazosin. Selector screening and concentration optimization experiments were performed. The resolution was 3.9 for clorprenaline, 2.3 for benzhexol, 3.1 for esmolol and 1.2 for terazosin when the running electrolyte was 60 mM hydroxypropyl-β-CD, 15 mM heptakis (2,3,6-Tri-O-methyl)-β-CD, 60 mM γ-CD and 60 mM heptakis (2,6-di-O-methyl)-β-CD, respectively, in 50 mM, pH 2.5 sodium phosphate buffer.     

Analysis of protamine peptides in insulin pharmaceutical formulations by capillary electrophoresis

Protamines are a group of highly basic peptides that are sometimes added to insulin formulations to prolong the pharmacological action. In this study, different methods were investigated to identify protamine in insulin formulations. Capillary electrophoresis in aqueous and non‐aqueous media was tested to separate these peptides with very close amino acid sequences. Different buffers (phosphate or formate, both acidified) and various additives (principally negatively charged and neutral surfactants) were investigated to optimize peptide separation. Finally, a micellar electrokinetic capillary chromatography method using a capillary of 120 cm effective length and an aqueous background electrolyte made up of 100 mM phosphate buffer (pH 2) and 50 mM Thesit® gave the best results, providing the separation of the four major protamine peptides within 25 min.     

Isotopic separation of lithium ions by capillary zone electrophoresis

Separation of ⁶Li and ⁷Li isotopes by CZE was demonstrated. The BGE contained 5 mM 4‐aminopyridine, 0.9 mM oxalic acid, 0.25 mM CTAB, and 0.25% w/v Tween 20 (рН = 9.2). The running conditions were +25 kV at 30°C with indirect photometric detection at 261 nm. Under optimal experimental conditions, the analysis time was less than 21 min. Separation of Li preparations with mole fraction of ⁶Li ranging from 3.44 up to 90.38% was demonstrated.