A Novel Fabrication for Method Long PeriodFiber Grating

A new method of fabricating all-fiber broadband-rejection filter based on long period fiber grating (LPFG) is proposed. The principle in the method is to make periodic asymmetrical deformation in the core of fiber without microbends by electrode discharging so as to induce periodic refractive index changes. Two kinds of filters whose rejection peak wavelength at 1550 nm and 1310 nm are obtained. The insertion loss is less than 0.6 dB and 1.4 dB respectively. The 20 dB bandwidth ranges from 10 nm to 39 nm. The backward reflection loss is extremely small (less than - 70 dB). Such devices can be used as isolation filters in 1310/1550 nm WDM system and other fields.     

A Novel Fabrication for Method Long Period Fiber Grating

A new method of fabricating all-fiber broadband-rejection filter based on long period fiber grating (LPFG) is proposed. The principle in the method is to make periodic asymmetrical deformation in the core of fiber without microbends by electrode discharging so as to induce periodic refractive index changes. Two kinds of filters whose rejection peak wavelength at 1550 nm and 1310 nm are obtained. The insertion loss is less than 0.6 dB and 1.4 dB respectively. The 20 dB bandwidth ranges from 10 nm to 39 nm. The backward reflection loss is extremely small (less than -70 dB). Such devices can be used as isolation filters in 1310/1550 nm WDM system and other fields.     

Near-Field Scanning Optical Microscopy Combined with a Tapping Mode Atomic Force Microscope

Tapping mode atomic force microscopy is used to control the tip-sample distance in near field scanning optical microscopy (NSOM), which gives both topographic and near-field images simultaneously. The evanescent waves are scattered by a vibrating silicon-nitride tip in the proximity of sample surfaces and are detected through a microscope objective. This NSOM allows the observation of opaque samples with reflection illumination. A glass grating of 1-μm pitch and an InP grating of 0.5-μm pitch are observed with a lateral resolution of 100 nm.Presented at 1996 International Workshop on Interferometry (IWI ‘96), August 27-29, Saitama, Japan     

Two channel multilayer mirrors for astrophysics

A two-channel mirror reflecting both Fe-IX/X (λ = 17.1 nm) and He-II (30.4 nm) resonance lines at near normal incidence has been designed, fabricated and characterized. These two passbands are often chosen in space instruments designed for the observation of the solar corona. The mirror structure used for optimization is a superposition of two periodic multilayers with three components per period. It has been designed by using optimization software with an appropriate merit function. The theoretical reflectivity for both resonance lines can reach 0.25. It is shown that, by using a set of filters, one can select either the Fe-IX/X or the He-II channel. The spectral response of the two-channel mirror has been measured on synchrotron radiation source on a large wavelength range, from 12 nm to 35 nm. Experimental reflectivity reaches 0.32 for the Fe-IX/X line and 0.19 for the He-II line.     

Analysis of the Chirped Super Moiré Gratings Based on Acousto-Optical Superlattices

There are multiple passbands in a chirped Bragg grating based on acousto-optic superlattice. The structure can be regarded as an acousto-induced super Moiré grating (AI-SMG). The analysis shows that the passbands of the AI-SMG are produced by several pairs of neighboring chirped gratings. With suitable structure parameters selected, the passbands can be non-larenzian-shape, narrow flat-top, with ripple less than 0.5dB and steep slope. The devices can be used as tunable narrow-band multichannel transmission filters. This analysis is useful for the designs and applications of the devices.     

Femtosecond laser fabrication of phase-shifted Bragg grating waveguides in fused silica

Phase-shifted Bragg grating waveguides (PSBGWs) were formed in bulk fused silica glass by femtosecond laser direct writing to produce narrowband (22±3) pm filters at 1550 nm. Tunable π and other phase shifts generated narrow passbands in controlled positions of the Bragg stopband, while the accurate placement of multiple cascaded phase-shift regions yielded a rectangular-shaped bandpass filter. A waveguide birefringence of (7.5±0.3)×10(-5) is inferred from the polarization-induced spectral shifting of the PSBGW narrowband filters.     

One-dimensional coupled cavities photonic crystal filters with tapered Bragg mirrors

The performance of one-dimensional (1D) coupled cavities photonic crystal (PC) filters has been analyzed by finite-difference time-domain (FDTD) simulation. It is shown that the addition of tapered Bragg mirrors at each side of the cavities, to create near-Gaussian field profiles for the cavity modes, results in the prediction of near flat-top passband filters with high out-of-band rejection ratio and near unity transmission. The tapered structures suppress the vertical radiation loss to allow optimization of the number of mirror periods for the best filter response whilst guaranteeing high transmission. A critical coupling condition (k = 2L_out/L_in = 1) for flat-top responses in doubly coupled cavities filters is proposed in the tapered structures. An optimized filter for 100 GHz optical communication system are demonstrated with 1 dB bandwidth of 0.17 nm, roll-off of 0.6 dB/GHz, out-of-band signal rejection of 33 dB and transmission of 95%. Further improvement of roll-off and out-of-band rejection is demonstrated in a triply coupled cavities filter.     

Configurable coarse wavelength division demultiplexers based on planar reflective gratings

Configurable coarse wavelength division multiplexing filters were realized using a planar reflective grating architecture utilizing small diffraction angles. The novel architecture yielded a 10-fold reduction in the chip size compared to previously reported filter configurations. The proposed design was manufactured using a standard silica-on-silicon process with a waveguide refractive index contrast of 0.82%. Polarization dependent losses of less than 0.2 dB were achieved without any post-processing steps. Fabricated filters showed insertion losses of 2.4 dB and remarkably broad free spectral ranges of more than 500 nm. The combination of single-mode input and multi-mode output guides resulted in box-like passband responses with bandwidth of 14.2 nm. Applications of the filters for integrated coarse wavelength division receivers and monitors are discussed.     

Characteristics of Multiply π Phase shifted Long period Fiber Gratings

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＴｈｅＬＰＦＧｉｓａｔｙｐｅｏｆｔｒａｎｓｍｉｓｓｉｏｎｇｒａｔｉｎｇｂａｓｅｄｏｎｔｈｅｐｒｉｎｃｉｐｌｅｏｆｃｏｕｐｌｉｎｇｔｈｅｇｕｉｄｅｄｆｕｎｄａｍｅｎｔａｌｍｏｄｅｔｏｔｈｅｆｏｒｗａｒｄｐｒｏｐａｇａｔｉｎｇｃｌａｄｄｉｎｇｍｏｄｅｓ.ＵｎｌｉｋｅｔｈｅＢｒａｇｇｇｒａｔｉｎｇ ,ｔｈｅｒｅｆｒａｃｔｉｖｅｉｎｄｅｘｐｅｒｔｕｒｂａｔｉｏｎｏｆＬＰＦＧ’ｓｈａｖｅａｍｕｃｈｇｒｅａｔｅｒｐｅｒｉｏｄｉｃｉｔｙｔｈａｎｔｈｅｗａｖｅｌｅｎｇｔｈｏｆｔｈｅｌ…     

Characteristics of Multiply π Phase-shifted Long-period Fiber Gratings

The transmission spectra of multiply π phase-shifted long-period fiber gratings (LPFG's) are analyzed by a combination of coupled-mode theory and the fundamental matrix method. The theoretical simulation shows that the LPFG' s can act as novel bandpass filters with two dominant passbands when multiple π phase-shifts are introduced at particular locations along the grating.     

Design and analysis of nano-deep corrugated waveguide grating-based dual-resonant filters in visible and infra-red regions

A theoretical analysis of nano-deep corrugated long-period waveguide gratings on a SU-8 polymer-based channel waveguide with NOA61 optical epoxy coated upper- and lower cladding is presented. The transmission spectra of the gratings show strong rejection bands both at visible (at wavelength region of 450?460 nm) and infra-red (at wavelength region of 1530?1540 nm) regions when a grating period of ?68 μm with optimized grating tooth height is considered. Phase-matching graphs are studied to find the relationship between resonance wavelength and grating period. These results show that the grating parameters significantly affect the characteristics of transmission spectra as well as the resonance wavelength of the grating. Long-period waveguide grating-based band pass filter made by use of same polymer materials are also designed and analyzed. These types of waveguide grating-based filters can widely be used for visible and infra-red wavelength sensing applications.     

CMOS compatible highly efficient grating couplers with a stair-step blaze profile

A novel grating coupler with a stair-step blaze profile is proposed.The coupler is a CMOS process compatible device and can be used for light coupling in optical communication.The blaze profile can be optimized to obtain a high efficiency of 66.7% for the out-of-plane coupling at the centre wavelength of 1595 nm with a 1 dB bandwidth of 41 nm.Five key parameters of the stair-step blaze grating and their effects on the coupling are discussed for the application in L band telecommunication.     

High‐efficiency single etch step apodized surface grating coupler using subwavelength structure

Grating couplers are key elements enabling the coupling of light between planar waveguide circuits and optical fibers. In this work, it is demonstrated using simulations and experiments that a high coupling efficiency can be achieved for an arbitrary buried oxide thickness by judicious adjustment of the grating radiation angle. The coupler strength is engineered by subwavelength structure, allowing straightforward apodization and single etch step fabrication. The design has been implemented using Fourier‐eigenmode expansion and finite difference time domain methods. The measured coupling loss of a continuously apodized grating is −2.16 dB with a 3 dB bandwidth of 64 nm, therefore opening promising prospects for low‐cost and high‐volume fabrication using 193 nm deep‐ultraviolet lithography. It is also shown by simulations that a coupling loss as low as −0.42 dB is predicted for a modified coupler structure with bottom mirror.     

Fabrication of χ{2) Grating in Poled Polymer Waveguide Based on Direct Laser Beam Writing

A simple method is described for fabricating high resolution χ⁽²⁾ grating in poled polymer waveguide. It is found that the second-order nonlinearity of corona-poled polymer thin film is erased after visible laser (450 nm) irradiation. The mechanism of the erasure of χ^{2) is discussed. High resolution χ⁽²⁾ grating structure in several poled polymer waveguides is demonstrated by direct writing with a cw He-Cd laser.On leave from the Department of Optical Instruments, Zhejiang University, Hangzhou, Zhejiang Province, 310027, P.R. of China.     

A study of AFM-based scratch process on polycarbonate surface and grating application

We report on the possibility of applying atomic force microscope (AFM) lithography to draw micro/nano-structures on the surface of a polycarbonate (PC) substrate. We also fabricated a grating structure on the PC surface using the scratch method. An AFM silicon tip coated with a diamond layer was utilized as a cutting tool to scratch the surface of the sample. In order to obtain pattern depth deeper than the control method of interaction force, we used a scanner movement method which the sample scanner moves along the Z-axis. A grating of 100 μm × 150 μm was fabricated by the step and repeat method wherein the sample stage is moved in the direction of the XY-axis. The period and the depth of the grating are 500 and 50 nm, respectively. Light of 632.8 nm wavelength was diffracted on the surface of the PC substrate.     

Bandwidth controllable transmission filter based on Moiré fiber Bragg grating

A new and efficient technique for fabrication of bandwidth controllable π–phase-shifted fiber Bragg grating (FBG) based on moiré grating using a uniform phase mask is demonstrated. The feasibility of writing a moiré grating into an ordinary SMF-28 fiber using stretching and double exposure by ultraviolet fringe is reported. We analyzed the relation between the initial differentia of phase of two exposures and the transmission spectrum of phase-shifted FBG. Moreover, we present a novel method to control the initial differentia of phase of two exposures. Using this technique, two kinds of resonant filters with a 3-dB line-width of 0.01 nm centered at 1553.79 nm and of 0.5 nm centered at 1554.57 nm respectively were fabricated with same uniform phase mask.     

Bandwidth controllable transmission filter based on Moiré fiber Bragg grating

A new and efficient technique for fabrication of bandwidth controllable π–phase-shifted fiber Bragg grating (FBG) based on moiré grating using a uniform phase mask is demonstrated. The feasibility of writing a moiré grating into an ordinary SMF-28 fiber using stretching and double exposure by ultraviolet fringe is reported. We analyzed the relation between the initial differentia of phase of two exposures and the transmission spectrum of phase-shifted FBG. Moreover, we present a novel method to control the initial differentia of phase of two exposures. Using this technique, two kinds of resonant filters with a 3-dB line-width of 0.01 nm centered at 1553.79 nm and of 0.5 nm centered at 1554.57 nm respectively were fabricated with same uniform phase mask.     

Color filter based on a submicrometer cascaded grating

A color filter incorporating a submicrometer cascaded grating was proposed. The device was analyzed by the rigorous coupled-wave analysis (RCWA) and consisted of three parts: a substrate, a ZnS grating and an Al grating. Three different devices with the full width at half-maximum (FWHM) of ∼100 nm and the peak transmission of more than 70% are designed based on the transmission characteristics under different structural parameters. Compared to the previous color filters incorporating a grating, the numerical results show that the transmission efficiency increases of more than 13% and the overlap of the tricolor output spectra decreases effectively.     

带宽可调的斜边光纤光栅滤波器的设计与制作

基于遗传算法设计了斜边三角形光纤光栅(EFBG)的折射率调制函数;提出了光纤外径沿轴向变化、在拉应力下可获得可调谐的斜边三角形光纤光栅;计算分析了该器件多个物理参量对反射光谱的影响。在实验中,采用紫外激光扫描辐照方法,制备了短波边斜边带宽为0．7nm、反射率为96％的斜边三角形光纤光栅;采用程序控制氢氟酸腐蚀方法获得外径从原始62．5μm减小到45μm、在85mm长度内按设计要求变化的光纤光栅。对该光纤光栅施加从。到1．715N变化的拉力时,其反射光谱短波边的斜边带宽从0．7nm增加到2．3nm,实现了一种带宽大范围可调的斜边光纤光栅。     

薄膜截止滤光片的消偏振设计

薄膜截止滤光片在倾斜入射时不可避免地会产生s和p二个偏振分量的分离,因而在许多应用,特别是光通讯的应用中成为一个棘手的难题。提出了一种新的设计方法,对最常用的45°入射角,实现了长波通和短波通两种截止滤光片的完全消偏振, 在透射率为50%处,其偏振分离分别为0.3 nm和0.1 nm。基本的设计方法是采用宽带法布里珀罗薄膜干涉滤光片中心波长两侧的干涉带作为长波通或短波通截止滤光片的初始膜系,然后经过适当的优化以提高透射带的透射率。宽带干涉滤光片的间隔层常由半波长厚度的高、低折射率混合膜层组成,如2H2L2H或2L2H2L。由于这种设计的截止区和透射带带宽常嫌不足,故提出了展宽截止区和透射带的方法。对一个典型的短波通截止滤光片,在波长1550 nm,截止区和透射带宽均达到了200 nm。这种设计方法不仅简单、性能优良,而且膜厚控制容差较大,故易于制造。