毛细管电泳与化学发光检测联用方法的研究进展

毛细管电泳由于其超高的分离效率广泛应用于生物医药、环境监测、食品科学以及公共安全等领域。然而,由于毛细管电泳具有进样量较少、检测光程较短等缺点,需要与高灵敏度检测器联用实现低浓度样品的分析。化学发光检测由于其背景信号低而具有超高的灵敏度。毛细管电泳-化学发光检测联用方法将毛细管电泳的高效分离特性与化学发光检测的高灵敏性相结合,成为一种非常重要的分析方法,广泛用于化学分析、药物筛选以及环境监测等领域。该文对近年来毛细管电泳-化学发光检测联用方法的基本原理进行概述,并对其发展趋势和应用前景进行了展望。     

微芯片毛细管电泳电化学检测方法及应用

阐述了微芯片毛细管电泳电化学检测(包括安培法、电导法、电化学发光法和联用电化学法)的研究进展；对各种电化学检测的原理和应用进行了较详细的叙述；着重讨论了不同材料检测电极在安培检测中的应用；接触式电导和非接触式电导的应用情况；展望了微芯片毛细管电泳电化学检测的前景。引用文献87篇。     

毛细管电泳化学发光在线检测

评论了毛细管区带电泳化学发光检测联用技术这一新兴的研究领域。化学发光检测具有背景低、热力学范围宽、灵敏度高的优点，适于毛细管电泳柱后微量样品的在线检测。论述了该检测器与毛细管电泳联用的接口和应用状况。     

毛细管电泳电化学法检测过氧化氢

以金微盘电极和离子液体修饰单壁碳纳米管糊微盘电极分别作为毛细管电泳电化学检测器,试验了两种电极对过氧化氢的响应情况,将金微盘电极与毛细管电泳联用,对过氧化氢进行了定性和定量检测.探讨了分离电压、缓冲溶液pH值和工作电位等条件对H2O2检测的影响.实验结果表明,峰电流与H2O2浓度在1.0×10-6～1.0×10-5mo...     

化学发光在生化分析中的应用研究进展

化学发光分析是利用化学发光反应的发光现象,对化学发光物质由激发态跃迁回基态时发出的光信号进行测量的一种分析方法。化学发光分析具有无需外来光源、灵敏度高、操作方便、分析快速以及易于实现自动化等优点,可与其它分析技术联用,在临床检验、药物分析和环境监测等领域具有广泛应用。近年来,纳米材料、生物芯片及微流控技术的引入促进了化学发光分析技术的发展。本文综述了化学发光分析与高效液相色谱、毛细管电泳、量子点、微流控芯片和微阵列、以及滚环扩增、等温指数扩增和两级等温扩增联用技术的发展,介绍了化学发光分析技术在DNA、生物小分子、生物酶、蛋白质和金属离子检测中的应用研究进展,并展望了其发展趋势。     

芯片毛细管电泳电化学发光法快速测定盐酸普鲁卡因的含量

建立了芯片毛细管电泳电化学发光法快速测定盐酸普鲁卡因含量的新方法。采用三联吡啶钌(Ru(bpy)2+3)为电化学发光试剂,三电极体系(直径300μm的铂圆盘电极为工作电极,集成在铂圆盘工作电极外的钛管为对电极,Ag/AgCl丝为参比电极)进行检测。分别考察了运行缓冲溶液pH值、检测缓冲溶液pH值、检测电位以及分离电压对分离和检测性能的影响。在优化条件下,即运行缓冲溶液为10mmol/L磷酸盐溶液(pH4.0),检测池缓冲溶液为含5mmol/LRu(bpy)2+3的50mmol/L磷酸盐缓冲溶液(pH7.0),检测电位为1.25V,分离电压为300V/cm时,盐酸普鲁卡因可在40s内实现较好的分离与检测,其线性范围为10~2000μg/mL(r2=0.9991),检出限(S/N=3)为3.0μg/mL,加标回收率为97%~99%,相对标准偏差为1.8%~2.2%。该方法简便、快速、准确,可用于盐酸普鲁卡因注射液的质量控制。     

新型毛细管电泳化学发光系统应用于氨基酸分离测定

本研究建立一种以过氧草酸酯为化学发光体系的新型毛细管电泳化学发光系统,并将该系统应用于氨基酸的分离测定.该系统设计了新型的电极模式与反应混和模式以获得高的信号稳定性与检测灵敏度.以一端与高压电源负极相连的铂丝连接到不锈钢注射针头为接地电极,电泳毛细管穿过注射针头,且其末端到达注射针头的出口,电泳毛细宇航局末端与化学发光试剂在反应池中以相对的方向靠近.实验结果表明,该系统稳定性好、分离效率高、灵敏度高、精密度好,对天冬氨酸与亮氨酸的检出限分别为2.0和 1.1 nmol/L.峰高及迁移时间的相对标准偏差分别为2.3%～3.8%和1.2%～1.5%.     

毛细管电泳安培检测技术进展

对毛细管电泳离柱和柱端安培检测方式、不同形式电极在安培检测中的应用、安培检测在芯片毛细管电泳中的应用、安培检测池等内容进行了总结和讨论 ,并预测了安培检测技术未来发展方向     

毛细电泳安培检测技术进展

对毛细管电泳离柱和柱端安培检测方式、不同形式电极在安培检测中的应用、安培检测在芯片毛细管电泳中的应用、安培检测池等内容进行了总结和讨论，并预测了安培检测技术未来发展方向。     

毛细管电泳电致化学发光法测定牛奶样中的土霉素残留量

以铕离子(Ⅲ)掺杂类普鲁士蓝(Eu-PB)化学修饰铂电极为工作电极,基于铜(Ⅱ)-土霉素配合物对三联吡啶钌(Ⅱ)电致化学发光强度的增敏作用,建立了用毛细管电泳电致化学发光法测定土霉素的新方法。实验对毛细管电泳分离条件和电化学发光检测条件进行了优化。在最佳实验条件下,电致化学发光峰面积与铜(Ⅱ)-土霉素配合物的浓度在0.138～46.1μg/mL范围内呈良好的线性关系,检出限为57.0ng/mL(3σ)。本法用于牛奶样中土霉素残留量的测定,加标回收率为95.5%(n=5)。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.