In vitro degradation of poly(lactide-co-p-dioxanone)-based shape memory poly(urethane-urea)

The degradation of poly(lactide-co-p-dioxanone)-based shape memory poly(urethane-urea) (SMPU) in vitro was investigated by observing the changes of the pH value of incubation media, weight loss rate, molecular weight and scanning electron microscopy (SEM) during degradation duration of 12 weeks. Moreover, ¹H NMR was used to precisely study the degradation position by calculating the change of characteristic peaks value. The results revealed that the introduction of p-dioxanone (PDO) and -NH-(CO)- and -HN-(CO)-NH- would increase the hydrophilicity of polymer, so the degradation of SMPUs is higher than PDLLA control in the initial time, however, the degradation rate decreased in the anaphase of degradation, which can be attributed to the alkalic -NH₂ from the NH₂ and -NH-(CO), -NH-(CO)-NH-.     

Preparation and in vitro degradation of porous three-dimensional silk fibroin/chitosan scaffold

Degradation behaviors of porous scaffolds play an important role in the engineering process of a new tissue. In this study, three-dimensional porous silk fibroin/chitosan (SFCS) scaffolds were successfully prepared by freeze-drying method. In vitro degradation behaviors of SFCS scaffolds have been systematically investigated up to 8 weeks in phosphate buffer saline (PBS) solution at 37 °C. The following properties of the scaffolds were measured as a function of degradation time: pore morphology, structure, weight loss, and wet/dry weight value. The pH value of the PBS solution during degradation was also detected. SFCS scaffolds maintained its porous structure till 6 weeks of degradation. During the first 2 weeks, the pH value fluctuated in a narrow range from 6.53 to 6.93. SFCS scaffolds degraded much more quickly during the first 2 weeks, and the weight loss reached 19.28 wt% after 8 weeks of degradation. The degradation process affects little SFCS scaffolds' swelling properties.     

Structures and conformations of 1-aryl-1,4-dihydro-3(2H)-isoquinolinones

The X-ray crystal structures of series of 1-aryl-1,4-dihydro-3(2H)-isoquinolinones (1-7) have been determined. Lactame heterocyclic ring possesses more or less deformed boat conformation in all examined structures. The aryl substituent adopts the equatorial position in the structures 1-3 and the axial one in 5-7. In the structure of 4, due to extremely flattened heterocyclic ring, aryl substituent location can be named as bisectional. In all solved structures the molecules are joined into the dimers via two N-H?O hydrogen bonds. At the same time, ¹H NMR studies in DMSO-d₆ solutions were accomplished and profound analysis of ²J, ³J, and ⁵J coupling constants have shown that in isoquinolinone system the heterocyclic ring adopts the boat conformation in all investigated compounds. The stereochemical orientations of the phenyl ring at C1 do not depend on the nature of the substituent but, exclusively, on the mode of substitution. However, three forms of undulated laktam heterocyclic ring conformation in respect of 1-aryl substituent positions were confirmed by calculation (conformational analysis).     

Degradation and calcification in vitro of new bioresorbable terpolymers of lactides with an improved degradation pattern

Experimental implants produced from poly(l-lactide/?-caprolactone/glycolide) 80/10/10% (polymer 1), poly(l-lactide/dl-lactide/glycolide) 80/10/10% (polymer 2) and poly(l-lactide/dl-lactide/glycolide) 80/5/15% (polymer 3) were subjected to in vitro degradation in a buffer solution at 37 °C and pH = 7.4 and calcification in vitro was performed at 37 °C in a simulated body fluid for 4, 8, 12, 16, 24, 28, 32 and 36 weeks. In vitro degradation was performed in static and pseudodynamic modes. Samples from poly(l-lactide) were used as a control. The changes in the materials during the course of degradation were assessed from the measurements of molecular weight, mechanical properties and crystallinity. The changes in the appearance of the materials upon degradation and calcification were observed using a scanning electron microscope with an EDAX attachment. The decrease of molecular weight at 4 weeks was 66% for polymer 1, 56% for polymer 2 and 20% for polymer 3. Samples retained 55% of their bending strength at 4 weeks (polymer 1), 50% at 12 weeks (polymer 2) and 99% at 12 weeks (polymer 3). The bending modulus of polymer 3 remained practically unchanged during the first 12 weeks of degradation. Subsequently it increased by 44% at week 16 and remained unchanged up to 24 weeks and next decreased to 33% of the initial value at the end of the experiment at week 32. The bending modulus of polymer 2 decreased 35% at week 8 and subsequently increased to 44% of the initial value at week 16 and remained at this level until week 20. Next the modulus decreased to 84% of the initial value at week 24. The bending modulus of polymer 1 progressively decreased over the first 12 weeks of degradation to 40% of the initial value. The maximum crystallinity attained by the samples at the end of the experiments was 60% for polymer 1 and 38% for polymers 2 and 3. In the static mode the pH remained constant up to week 8 for polymer 1, week 20 for polymer 2 and week 28 for polymer 3. It decreased to 3.8 at weeks 12, 20 and 36 for polymers 1, 2 and 3, respectively. All the samples underwent calcification from week 16 of the experiments with the Ca/P ratio ranging from 0.92 to 1.20.     

In vitro and in vivo degradation behaviors of synthetic absorbable bicomponent monofilament suture prepared with poly(p-dioxanone) and its copolymer

A synthetic absorbable bicomponent monofilament suture (MonoFlex), composed of poly(p-dioxanone) and its copolymer, was prepared by a conjugate spinning method, and its degradation behavior was investigated in vitro and in vivo. MonoFlex degraded by hydrolysis, and retained approximately 55% of its original strength after four weeks of incubation in PBS at 37 °C. About 70% of the original strength was maintained after four weeks of implantation in rats, and the suture material was completely absorbed after 180-210 days post-implantation in rats. No remarkable tissue reactions were observed during degradation, and foreign body reactions were similar to those of commercially available suture materials composed of poly(p-dioxanone). This study to monitor the degradation behavior of monofilament sutures in vitro as well as in vivo may be useful in the development of novel suture materials for extended wound support.     

Applications of in vivo and in vitro solid-phase microextraction techniques in plant analysis: A review

As a very popular sample preparation technique, solid-phase microextraction (SPME) coupled with various analytical instrumentation, has been widely used for the determination of trace levels of different plant compounds, such as volatile organic compounds (VOCs) emitted from the different plant organs, and environmental contaminants in plants. In this review, recent applications of in vitro and in vivo SPME in plant analysis are discussed and summarized according to the different organs of plants, including fruits, flowers, leaves, stems, roots and seeds, and the whole plant as well. Future developments and applications of SPME in plant analysis, especially in vivo sampling approaches, are also prospected.     

In vitro and in vivo degradation behaviors of thermosensitive poly(organophosphazene) hydrogels

Biodegradable and thermosensitive poly(organophosphazenes) with various substituents were synthesized and their hydrolytic degradation properties were investigated in vitro and in vivo. The aqueous solutions of all polymers showed a sol-gel phase transition behavior depending on temperature changes. The side groups of polymers significantly affected the polymer degradation and accelerated hydrolysis of polymers in the order of carboxylic acid > depsipeptide > without carboxylic acid and depsipeptide. The increased gel strength led to the decreased hydrolysis rate. The polymer hydrogels with 750 Da of α-amino-ω-methoxy poly(ethylene glycol) were rapidly decreased by dissolution. The polymer degradation was also influenced by pH and temperature. The in vivo behaviors of mass decrease of the polymer hydrogels were similar with the in vitro results. These results suggest that the biodegradable and thermosensitive poly(organophosphazenes) hold great potentials as an injectable and biodegradable hydrogel for biomedical applications with controllable degradation rate.     

Synthesis of Graft Polymers by Copolymerization of Macromonomer. III. Preparation and Copolymerization of Styrene-Terminated Poly(Oxyethylene) Macromonomer

Styrene-terminated poly(oxyethylene) macromonomers (SOE) with narrow molecular weight distribution and quantitative styrene monofunc-tionality were synthesized. In homopolymerization of SOE, conversion of monomer to polymer was shown to be low in spite of high consumption of the vinyl groups of the SOE molecules. Free-radical copolymer-ization of the macromonomer with methyl methacrylate and styrene occurred smoothly, as opposed to homopolymerization. Cumulative copolymer composition and total conversion were determined from the conversions of macromonomer and comonomer (by weight changes) and by proton NMR of the copolymer. The monomer reactivity ratios were found to be r_a = 0.06 and r_b = 2.0 for the copolymerization of SOE macromonomer (a) with methyl methacrylate (b). In this case the macromonomer exhibited considerably lower reactivity than predicted from its low molecular weight model compound. The monomer reactivity ratios estimated for SOE and styrene were r_a = 0.86 and r_b = 1.20. The reactivity of SOE was comparable to, but somewhat lower than, styrene. The graft copolymers were used as activators in the halogen displacement reaction, and it was found that their catalytic activity depends on copolymer composition and chemical structure.     

Investigation of the degradation mechanism of cross-linked polyethyleneimine by NMR spectroscopy

The degradation pathway of a cross-linked polyethyleneimine (c-PEI) suitable as a gene carrier was studied at different pH values by real-time ¹H NMR and diffusion-weighted ¹H NMR spectroscopy. The c-PEI was synthesized by cross-linking PEI segments with 2,4-pentanediol diacrylate (PDDA). The experimental results show that under basic, neutral and acidic conditions, the degradation of c-PEI occurs through hydrolysis of the ester moieties of the PDDA linkers. The degradation half-life of the polymer is 22, 48 and more than 720 h at pH 10.2, 7.4 and 4.6, respectively, showing that the degradation of c-PEI is highly pH sensitive. By using a modified version of diffusion-weighted ¹H NMR experiment, the variation of the apparent molecular weight of c-PEI in the degradation process was monitored. Furthermore, a Monte Carlo simulation was applied to simulate the relation between the average molecular weight and the number of chain ends during the degradation process of a model system of c-PEI. By comparing the NMR results with those obtained from simulation, the mechanism of degradation under various pH conditions is discussed. The present work demonstrates that the combination of real-time ¹H NMR, diffusion-weighted ¹H NMR spectroscopy and Monte Carlo simulation is a useful strategy for characterizing the degradation process of degradable polymers.     

Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro

Porous nano-hydroxyapatite/polycaprolactone (nHA/PCL) scaffolds with different composition ratios of nHA/PCL were fabricated via a melt-molding/porogen leaching technique. All scaffolds were characterized before and after degradation in vitro for six months. The original scaffolds had high porosity at around 70% and showed decreasing compressive modulus (from 24.48 to 2.69 MPa for hydrated scaffolds) with the introduction of nHA. It was noted that the scaffolds could retain relatively stable architecture and mechanical properties for at least six months, although some slight changes happened with the nHA/PCL scaffolds in the mass, the nHA content, the PCL molecular weight and the crystallinity. Moreover, during the 7 days culture of bone marrow stromal cells (BMSCs) on scaffolds, the cell adhesion and proliferation of BMSCs were presented well on both the surface and the cross-section of the scaffolds. All of these results suggested the nHA/PCL scaffolds to be promising in bone tissue engineering.     

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Silica-PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1-5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), ¹³C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (¹³C{¹H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame (T_1ρ(H)), in the laboratory frame (T₁(H)) and cross-polarization times (T_CH). Results showed that silica nanoparticles are well dispersed in the polymeric matrix whose structure remains amorphous. The degradation of the polymer occurs at higher temperature in the presence of silica because of the interaction between the two components.     

Synthesis, characterization and antimicrobial activity of palladium(II) complexes with some alkyl derivates of thiosalicylic acids: Crystal structure of the bis(S-benzyl-thiosalicylate)-palladium(II) complex, [Pd(S-bz-thiosal)2]

S-Alkyl (R = benzyl, methyl, ethyl, propyl and butyl) derivatives of thiosalicylic acid and the corresponding palladium(II) complexes were prepared and their structures were proposed on the basis of infrared, ¹H and ¹³C NMR spectroscopy. The cis geometrical configurations of the isolated complexes were proposed on the basis of an X-ray structural study of the bis(S-benzyl-thiosalicylate)-palladium(II), [Pd(S-bz-thiosal)₂] complex.Antimicrobial activity of the tested compounds was evaluated by determining the minimum inhibitory concentration (MIC) and minimum microbicidal concentration (MMC) in relation to 26 species of microorganisms. The tested ligands, with a few exceptions, show low antimicrobial activity. The palladium(II) complexes, [Pd(S-R-thiosal)₂], have statistically significant higher activity than the corresponding ligands. The complexes [Pd(S-et-thiosal)₂] and [Pd(S-pro-thiosal)₂] displayed the strongest activity amongst the all tested compounds. The palladium(II) complexes show selective and moderate antibacterial activity and significant antifungal activity. The most sensitive were Aspergillus fumigatus and Aspergillus flavus.     

The Synthesis of Mono- and Bi-Metallic Platinum(II) and/or (IV) Complexes Containing the Ligand Bis(diphenylphosphino) Methylamine

Complexes of the type [Pt R₂ (dppma-PP′)] (R─Me, Et, Ph, CH₂Ph, C₆H₄ Me-p, C₆H₄OMe-2, CH₂CMe₃, 1-naphthyl, C₆H₄Me-o, dppma = Ph₂PNMe PPh₂) have been prepared from [PtCl₂, (dppma-PP′)] and the corresponding alkyl-lithium or Grignard reagents. Equilibrium constants, k, for the conversion of [PtR₂ (dppma-PP′)] into cis-[PtR₂(dppma-P)₂] with dppma were studied using ³¹P NMR spectroscopy at room temperature. Equilibrium is rapidly established for R─C₆H₄-Me-o, at 20°C. Complex of the type cis-[PtR₂ (dppma-P)₂] was isolated R─C₆H₄ Me-o. The complexes [PtMe₂(dppma-P)₂] and [Pt(o-methoxyphenyl)₂(dppma-P)₂] were prepared, but unfortunately decomposed once isolated, the only evidence for its formation being from ³¹P-{¹H} NMZR spectroscopy. The o-tolyl or 1-naphthyl complexes exist as syn-anti mixtures in solution, due to restricted rotation around the platinum aryl bonds. Treatment of several complexes of the type [PtR₂(dppma-PP′)] with MeI gives [PtR₂Me(I)(dppma-PP′)] with trans addition of MeI. Treatment of [PtR₂(dppma-PP′)] with HCl gives [Pt Cl (R) (dppma-PP′)] for R─C₆H₂Me₃-2,4,6, C₆H₄-CH₃-2, C₆H₄-Me-4, Me, 1-naphthyl. The ¹H, ³¹P NMR parameters for these complexes are discussed. Attempted preparation of complexes of the type [PtR₂ (dppma-P)₂M] (R─C₆H₄-Me-2, Me CN-C₆H₄-Me-4); M─Pd, Pt, Au,) are reported.     

A multinuclear NMR study in the solid state and in solution of thallium(I) tris-(pyrazol-1-yl)borates (thallium scorpionates)

The ¹H, ¹³C and ¹⁵N NMR spectroscopic properties of six thallium tris-(pyrazol-1-yl)borates, including a tetrakis derivative, were determined. The results in solution were necessary to understand those, more complicated, in the solid state. A collection of ²⁰⁵Tl-¹⁵N and ²⁰⁵Tl-¹³C couplings was measured in the latter state. Among those, a very large coupling constant (between 194 and 282 Hz) has been measured on the carbon at the position 4 of the pyrazole ring in several compounds and particularly for the cyclobutyl derivative [Tl(Tp^Cbu)]. It has been assigned to a direct interaction of the 4-C-H ? Tl type and related to the X-ray structures, when available.     

Characterization of degradation products of poly[(3,3,3-trifluoropropyl)methylsiloxane] by nuclear magnetic resonance spectroscopy, mass spectrometry and gas chromatography

Poly[(3,3,3-trifluoropropyl)methylsiloxane] (PTFPMS) was treated with the solvents acetone, ethyl acetate and methanol and its degradation products were analyzed with multiple techniques. ¹H, ²⁹Si and ¹⁹F nuclear magnetic resonance (NMR) spectroscopy were useful for the characterization of the intact polymers and for the determination of cyclosiloxanes. Cyclosiloxanes with a ring size of up to 23 were quantified by gas chromatography. The only degradation products found were TFPmethyl-cyclosiloxanes. 1,3,5,7-Tetrakis(TFPmethyl)-cyclotetrasiloxane was predominant, and (TFPmethyl)cyclotri-, penta- and hexasiloxane could be detected at lower concentrations. The identity of cyclic degradation products with a ring size of up to 6 was unambiguously confirmed by direct infusion mass spectrometry. The TFPmethyl-cyclosiloxanes were successfully ionized by electrospray ionization in the negative mode. None of the techniques applied gave hints to other degradation products such as short linear oligomers. Almost complete degradation of PTFPMS occurred in acetone and methanol, while degradation is distinctly reduced in ethyl acetate.     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Novel fluoro-substituted benzo- and benzothieno fused pyrano[2,3-c]pyrazol-4(1H)-ones

A straightforward, two-step synthesis of fluoro substituted chromeno[2,3-c]pyrazol- and [1]benzothieno[2′,3′:5,6]pyrano[2,3-c]pyrazol-4(1H)-ones, respectively, is presented. Hence, treatment of 1-substituted or 1,3-disubstituted 2-pyrazolin-5-ones with fluoro substituted 2-fluorobenzoyl chlorides or 3-chloro-6-fluoro-1-benzothiophene-2-carbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane gave the corresponding 4-aroylpyrazol-5-ols, which were cyclized into the fused ring systems. 5-Fluorochromeno[2,3-c]pyrazol-4(1H)-one was obtained upon treatment of the 1-(4-methoxybenzyl) protected congener with trifluoroacetic acid. Treatment of 5-fluorochromeno[2,3-c]pyrazol-4(1H)-ones with methylhydrazine afforded novel tetracyclic ring systems such as 2-methyl-7-phenyl-2,7-dihydropyrazolo[4′,3′:5,6]pyrano[4,3,2-cd]indazole. Detailed NMR spectroscopic investigations (¹H, ¹³C, ¹⁵N, ¹⁹F) with the obtained compounds were undertaken.     

Thermochromism in nickel(II) complexes: thermal, solid state H NMR and single crystal X-ray analysis of bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate

The complex bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate undergoes a first-order thermochromic phase transition at ca. 476 K, changing its color from orange to red. The room temperature X-ray crystal structure determination showed that the nickel ion possesses a square-planar geometry with two five membered chelate rings, in the δλ conformation, forming the NiN₄ chromophore. The broad-line ¹H NMR indicates the onset of a dynamic disorder of diamine chelate rings at the phase transition temperature region, while T₁ measurement of ¹H affords the activation energy of the puckering metal chelate rings to be 26 kJ mol⁻¹. The electronic spectrum revealed that a weakening of ligand field around the nickel is associated with the phase transition.     

Synthesis and degradation behavior of poly(ethyl cyanoacrylate)

Poly(ethyl cyanoacrylate) was synthesized using N,N′-dimethyl-p-toluidine as an initiator through an anionic/zwitterionic pathway. The degradability and the degradation mechanism of the prepared polymer were examined from various viewpoints. A combination of TGA and GPC analysis allowed us to confirm that the thermal degradation of this polymer was predominantly due to an unzipping depolymerization process initiated from the polymer chain terminus. The polymer was inherently unstable and exhibited interesting degradation behavior in solution with basic reagents. The degradation in solution was also found to be attributed to the unzipping of the monomer from the chain end. However, the degradation behavior of the polymer could be controlled by changing solvents, temperatures, and additives. These findings give an insight into the degradation behavior of poly(alkyl cyanoacrylate)s, which is a crucial point in utilizing these polymer homologues for various applications.     

Mononuclear indolyldithiocarbamates of SnCl4 and R2SnCl2: Spectroscopic, thermal characterizations and cytotoxicity assays in vitro

Several mononuclear Sn compounds ranging from mono to tetrakisindoline dithiocarbamates have been synthesized and characterized. Various spectroscopic techniques in combination with microanalytical data lead to the formation of 1:2 and 1:4 (Sn:Naindtc) type complexes depending on the molar ratio of the sodium salt of indolinedithiocarbamate employed. A symmetrical bidentate coordination of the indolinedithiocarbamate has been observed in all the cases as evident by a single sharp band at 1000 cm⁻¹ in their IR spectra. The compounds were found to adopt an octahedral arrangement around the Sn atom as evident from their ¹¹⁹Sn NMR data. The TGA/DSC profile of the ligand exhibits a two-stage thermogram while the complexes decompose in three steps leading to the formation of tin-sulfide as the eventual end product. The in vitro cytotoxicity of butyl and phenyl analogues has been studied against the standard human tumor cell lines. The compounds have also been screened for their antifungal and antibacterial activity against E. coli, S. aureus, C. albicans and A. flavus. The results indicated the compounds to be active.