Autothermal reforming of methane over Ni catalysts supported over ZrO2-CeO2-Al2O3

Ni catalysts supported on Al2O3, ZrO2-Al2O3, CeO2-Al2O3 and ZrO2-CeO2-Al2O3 were prepared by coprecipitation method, and their catalytic performances for autothermal reforming of methane to hydrogen were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. The relationship between the structures and catalytic activities of the catalysts was discussed. The results showed that the catalytic activity and stability of the Ni/ZrO2-CeO2-Al2O3 catalyst was better than those of other catalysts with the highest CH4 conversion, H2/CO and H2/COx ratio at 750 ℃. The catalyst showed a little deactivation along the reaction time during its 72 h on stream with the mean deactivation rate of 0.08%/h. The catalytic performance of the Ni/ZrO2-CeO2-Al2O3 catalyst was also affected by reaction temperature, no2 ： nCH4 molar ratio and nH2O ： nCH4 molar ratio. TPR, XRD and XPS measurements indicated that the formation of ZrO2-CeO2 solid solution could improve the dispersion of NiO, and inhibit the formation of NiAl2O3, and thus significantly promoted the catalytic activity of the Ni/ZrO2-CeO2-Al2O3 catalyst.     

不同方法制备的Ni／ZrO2-CeO2-Al2O3催化剂对CH4-CO2重整反应的催化性能

 采用水热合成法、溶胶凝胶法和共沉淀－负载法制备了相同NiO含量的Ni／ZrO2－CeO2－Al2O3催化剂，考察了它们在CH4－CO2重整反应中的催化性能及稳定性，测定了积碳量．用CO2程序升温脱附方法测试了它们的CO2吸附性能，用H2程序升温脱附方法测试了表面Ni的分散度．结果表明，随温度升高，CH4和CO2转化率降低的顺序是：溶胶凝胶法≈共沉淀－负载法＞水热合成法，并且反应产物中n（CO）／n（H2）比随温度升高而降低．水热法和共沉淀－负载法制备的催化剂稳定性好，且前者的活性比后者高；溶胶凝胶法制得的催化剂活性较高，但易失活．积碳量大小顺序是：水热法＞溶胶凝胶法＞共沉淀－负载法．与其他方法制备的催化剂相比，水热法制备的催化剂对CO2的吸附量更大，\r\n而且积碳主要存在于载体上，从而保证了催化剂的稳定性．     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

CO2 Reforming of CH4 over Ni／CeO2-ZrO2-Al203 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-A12O3 catalyst with different A12O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and A12O3 is stronger than that between NiO and CeO2-ZrO2. The addition of A12O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess A12O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

Ni/La2O3/α-Al2O3中的高温脱附氢促进CH4/CO2重整反应的初活性

 通过H2程序升温脱附实验,在H2还原的Ni/La2O3/α-Al2O3催化剂上可以明显观察到高温脱附氢(高温氢). 动力学实验结果表明,随催化剂上高温氢含量的增加, CH4/CO2重整反应的初始活性升高,同时高温氢也可在重整反应过程中原位生成,并使重整反应的活性最终达到稳定. 脉冲实验结果表明,随催化剂上高温氢含量的增加, CH4解离后生成的活性中间体CHx物种的x值也增大,进而降低了CHx与CO2反应的活化能,提高了CHx与CO2反应的速率. La2O3助剂的添加提高了Ni/La2O3/α-Al2O3催化剂上逆水气变换反应的速率,并且对CO2的活化也有促进作用. La2O3助剂的加入对于CH4/CO2重整反应的重要作用是使高温氢的数量增多且稳定性提高,有利于保持CHx物种中较高的x值,促进重整反应.     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst.The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS.Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature,and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts.Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Methane Decomposition over Ni/α-Al2O3 Promoted by La2O3 and CeO2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with differ-ent contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

Methane Decomposition over Ni/α-Al_2O_3 Promoted by La_2O_3 and CeO_2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with different contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

Zn-Cr整体催化剂中Ce-Zr溶胶涂层的制备、表征及对甲醇自热重整反应的影响

 以溶胶-凝胶法制备出粒子尺度均一的Ce-Zr溶胶. TEM和XRD结果表明, 1073 K焙烧后, Ce-Zr复合氧化物的粒径仍保持在20～50 nm. 将Ce-Zr溶胶作为甲醇自热重整制氢Zn-Cr整体催化剂的涂层,考察了溶胶在涂层多次重复过程中的稳定性和干燥方式对Ce-Zr涂层龟裂程度的影响. 结果表明,对多次使用后的溶胶进行胶溶处理可以有效控制涂层制备过程中胶体粒子的大小; 微波干燥更加有利于蜂窝陶瓷载体各通道中Ce-Zr涂层的均匀干燥; Ce-Zr涂层的引入显著提高了甲醇自热重整Zn-Cr整体催化剂的稳定性,这归因于Ce-Zr涂层提高了催化剂的氧化还原活性,使其能量匹配更好,避免了热点的产生,从而抑制了催化剂的烧结与失活.     

Fe/CexZr0.9-xLa0.1O1.95-Al2O3 整体式催化剂上的甲烷催化燃烧反应

 采用共沉淀法制备了一系列 CexZr0.9-xLa0.1O1.95-Al2O3 储氧材料 (其中 CexZr0.9-xLa0.1O1.95 与 Al2O3 的质量比为 1; x = 0, 0.3, 0.5, 0.7 和 0.9), 以其为载体, 制备了一系列负载铁基整体式催化剂. 考察了该系列催化剂催化甲烷燃烧反应性能, 并用低温 N2 吸附-脱附、储氧能力测试、X 射线衍射和 H2 程序升温还原等手段对载体和催化剂进行了表征. 活性测试结果表明, 当 x = 0.7 时, 催化剂活性最高, 可在 V(CH4) = 1% 和 50 000 h1 条件下使甲烷 465 oC 起燃, 615 oC 完全转化. CexZr0.9-xLa0.1O1.95-Al2O3 样品同时具有较高的储氧能力、较高的比表面积和抗热老化能力. 当 x = 0.5 和 0.7 时, 催化剂载体以 CeZrLaAlO 固溶体存在, 抗老化能力最好, 且 x = 0.7 时, 催化剂最易被还原.     

Synthesis Gas Production from Natural Gas on Supported Pt Catalysts

Auto-thermal reforming of methane, combining partial oxidation and reforming of methane with CO2 or steam, was carried out with Pt/Al2O3, Pt/ZrO2 and Pt/CeO2 catalysts, in a temperature range of 300-900℃. The auto-thermal reforming occurs in two simultaneous stages, namely, total combustion of methane and reforming of the unconverted methane with steam and CO2, with the O2 conversion of 100% starting from 450 ℃. For combination with CO2 reforming, the Pt/CeO2 catalyst showed the lowest initial activity at 800 ℃, and the highest stability over 40 h on-stream. This catalyst also presented the best performance for the reaction with steam at 800 ℃. The higher resistance to coke formation of the catalyst supported on ceria is due to the metal-support interactions and the higher mobility of oxygen in the oxide lattice.     

制备高效稳定CO2重整甲烷Ni/ZrO2催化剂的新方法

 用超临界乙醇干燥ZrO(OH)2醇凝胶,可以制备出高效稳定的纳米复合型CO2重整甲烷Ni/ZrO2-AS催化剂; 在常压流动N2中加热处理ZrO(OH)2醇凝胶制备ZrO2前体,同样可以得到高效稳定的纳米复合型Ni/ZrO2-AN催化剂. 在270~650 ℃范围内改变ZrO(OH)2醇凝胶的热处理温度,对最终的Ni/ZrO2-AN催化剂的性能影响不大. 用这种方法制备纳米复合型Ni/ZrO2催化剂避免了复杂的超临界工艺,从而容易获得实际应用.     

Ni/Al2O3和Ni/La2O3催化剂上低温乙醇水蒸气重整制氢

 采用浸渍、热分解和氢还原等步骤制备了两种纳米晶载体催化剂Ni/Al2O3和Ni/La2O3,应用X射线衍射、X射线光电子能谱、N2吸附和扫描电镜对催化剂的体相和表面结构进行了测定,采用固定床反应器考察了催化剂对乙醇水蒸气重整制氢反应的催化性能. 实验结果表明, 15.3%Ni/La2O3催化剂对乙醇的低温水蒸气重整反应表现出较高的催化活性和稳定性. 250 ℃时乙醇的转化率已达到80.7%,氢气的选择性为49.5%; 330 ℃时乙醇的转化率达到100%,氢气的选择性可达54.3%. 16.1%Ni/Al2O3催化剂对低温乙醇水蒸气重整反应的催化活性较低.     

甲醇自热重整制氢用Cu-ZnO/Al2O3催化剂的研究

 研究了负载于堇青石蜂窝陶瓷载体上的Cu-ZnO/Al2O3催化剂对甲醇自热重整制氢反应的催化性能,考察了铜负载量和反应条件对催化剂活性和反应速率的影响,采用XRD和H2-TPR技术对催化剂的分散状态和还原进行了表征. 结果表明,铜负载量较低时铜处于较均匀的分散状态,容易被还原,γ-Al2O3的引入促进了铜的还原. 还原后的低铜负载量的样品上,在空速为4000～12000 h-1和氧/醇摩尔比为0.3的条件下,甲醇的转化率接近100%,H2的生成率和CO2的选择性较高. 证实了还原的铜为反应的活性位.     

甲烷在稀土助剂修饰的Ni/α-Al2O3催化剂上的解离

采用脉冲－色谱法，考察了甲烷在La2O3、CeO2修饰的Ni/α-Al2O3催化剂上的解离，并用TPR、XRD等方法对催化剂进行了表征。结果表明，添加La2O3，能促进甲烷的解离，并可使解离产生的碳保持较高的活性；CeO2的添加对甲烷的解离积炭有一定的抑制作用；La2O3和CeO2均能抑制镍晶粒的聚集。甲烷在Ni基催化剂上的解离，具有一定的结构敏感性。     

冷等离子体喷射流对甲烷二氧化碳重整用Ni/Al2O3催化剂的还原机制

采用理论计算与实验相结合的方法研究了常压冷等离子体喷射流还原Ni/Al2O3催化剂的机理.首先,在假设还原过程是H原子起主导作用的基础上,依据对冷等离子体喷射流的放电特性分析,计算得到H2的理论解离度和催化剂理论还原时间.其次,采用X射线衍射表征及活性评价的手段,考察了等离子体制得催化剂还原过程及实际还原时间.结果表明...     

Methane Dry Reforming over Alumina Supported Co Catalysts

A series of Co/γ-Al2O3 catalysts were prepared with the impregnation .method and characterized by means of the BET specific surface area, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Laser Raman spectroscopy. The Co/γ-Al2O3 catalysts were activated by using H2, 20%CH4/H2 or CH4, re-spectively. There was no obvious difference between the activities of the Co/γ-Al2O3 catalyst activated by us-ing the different activation methods for methane dry reforming. The catalytic properties of the Co/γ-Al2O3 catalysts with different Co loadings were also investigated. The optimized Co loading for the Co/γ-Al2O3 cata-lyst pretreated with 20% CH4/H2 is around 12% (mass fraction).     

Ni/La_2O_3/Al_2O_3催化剂上甲烷干重整积炭表征与分析(英文)

用传统的等体积浸渍法或蒸发法制备了Ni/La_2O_3/γ-Al_2O_3与Ni/La_2O_3/α-Al_2O_3催化剂,在没有稀释气体的条件下进行了甲烷干重整反应.采用H_2程序升温还原、N_2吸附脱附、X射线衍射、透射电子显微镜、热重-差示扫描热量以及程序升温加氢等手段对新鲜的与反应后的催化剂以及沉积的碳进行了表征.结果表明,催化剂上有四种含碳物种,以三种形态存在,即无定形碳(聚合态)、丝状碳或石墨碳.这些催化剂上积炭的数量与种类各不相同,依赖于催化剂中金属Ni颗粒的大小与载体的织构特性.丝状碳的形成及其形貌与金属Ni颗粒的大小有着密切的联系.Ni颗粒小于15nm时能抑制丝状碳的形成与沉积.减少积炭的数量,同时能产生较多的活性C_a物种,从而在一定程度上导致催化剂具有较好的活性与稳定性.     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1 Al0.7Oδcatalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1 Al0.7Oδautothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδwas found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

流化床中 CH4/C3H8 自热重整制合成气

 在流化床反应器中, 考察了 Ni/SiO2 催化剂上 CH4 或 CH4-C3H8 临氧 CO2 重整 (自热重整) 制合成气反应性能. 结果表明, 在 CH4-C3H8 混合气自热重整反应中, Ni 粒径较小催化剂的活性和抗积炭性能较高, CH4 和 CO2 转化率分别达 75.5% 和 72.6%. C3H8 比 CH4 更易解离及被氧化, 部分 C3H8 解离出来的中间产物 CHx 物种可与吸附 H 结合为 CH4, 因而降低了 CH4 的表观转化率; CHx 也可与吸附的 CO2 物种反应生成 H2 与 CO, 从而促进了 CO2 的转化.