N，N′-二甲基-N，N′-二辛基丙二酰胺萃取铀(Ⅵ)的研究

The novel unsymmetrical extractant N，N′-dimethyl-N，N′-dioctylmalonamide (DMDOMA) was prepared by reaction of diethyl malonate with N-methyl octanamine. The extraction mechanism and the behavior of uranyl nitrate with DMDOMA employed cyclohexane as diluent were studied. The effects of concentrations of nitric acid, sodium nitrate, extractant and also the temperature on the extraction were considered. The stoichiometry of the extracted species is and the coordination of extracted species was suggested based on the IR data. The value of ΔH of extraction is -26.9 ± 0.80 kJ·mol^-1. The value of the apparent extraction constant is 133.88 ± 17.92, which shows that the optimization of extractant structure improves the extractability of malonamide for uranyl nitrate.     

EXTRACTION CHEMISTRY OF RARE EARTHS BY MONO-ALKYL ISOPROPYLPHOSPHONATES

The influence of chemical structure of ester alkyl group of mono-alkyl isopropylphosphonates on the extraction behaviours of rare earth has been studied. The mono-alkyl isopropylphosphonate bearing β-substituted ester alkyl group shows high K_(ex) value, which is evidently depressed, usually in two orders of magnitude, by introducing a branch chain on the α-position of the ester alkyl group. The steric effect of ligand is usually enhanced due to the characteristic lanthanide contraction.z2The extraction chemistry of rare earths by mono-amylnonyl isopropylphosphonates (MANPP) was studied in detail The thermodynamic function was estimated and the "tetrad effect" between K_(ex) value or △G value and atomic number was observed. In addition, the composition and structure of the coordinated compound was studied. As demonstrated by the experimental data, the extractive separation of Sm and Nd by MANPP in chloride solution was better than that in nitrate system.     

THE EFFECT AND FUNCTION OF AliBu_2OR'''' ON BUTADIENE-PROPYLENE ALTERNATING COPOLYMERIZATION CATALYZED BY VO(OR)_2Cl-AIiBu_3 SYSTEM

Four kinds of AliBu_2OB' with different R' were synthesized. The effect of AliBu_2OR'/AliBu_3 mole ratio on the conversion, the [η] of copolymer and catalytic efficiency were studied. The conversion was increased obviously and the catalytic efficiency was 2.7 times higher than before. The effect of the amount of AliBu_2OR' on the valence state of vanadium ion and the change of the valence state of vanadium ion with reaction temperature and time were studied. The VIS and IR spectra of the trinary-component catalyst system were measured. The model of active center including AliBu_2OR' was proposed. The function of AliBu_2OB was explained.     

HMeBMPPT的合成及其对铀(Ⅵ)的萃取机理研究

The solvent extraction of U(Ⅵ) from nitric acid solution was studied with one new extractant, 4-p-methylbenzoyl-2,4-dihydron-5-methyl-2-phenyl-pyrazol-3-thione (HMeBMPPT), synthesized via acylation, chlorination and sulfurication of the starting material 1-phenyl-3-methyl-pyrazolone-5(PMP) in high yield. The structure of the new extractant was confirmed by means of elemental analysis, MS, ¹H NMR and X-ray diffraction. The effects of diluent, temperature, the concentrations of nitric acid, and the concentration of extractant on the extraction were investigated and the extraction mechanism is suggested.     

SnO2/ 石墨复合材料作为锂离子电池负极材料研究

Nano-scale SnO₂ powders were prepared by hydrolyzation. Graphite was poured into the SnCl₄ solution during hydrolyzation. After drying and calcining at 360 ℃, the negative electrode composite material of nanosized SnO₂ and graphite was obtained. The composite materials were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The average crystallite size was in the range of 15～20 nm. Electrochemical lithium insertion/extraction was studied preliminarily on the obtained composite. The discharge capacity of nanosized SnO₂ / graphite composite was found to have a high electrochemical reversible capacity for Li-ion insertion and extraction, which possessed the advantages of both higher discharge capacity of SnO₂ and lower discharge potential of graphite. In addition, the cycle capability was also improved due to the inhibiting effect of the composite against pulverization and agglomeration to a certain extent during Li-ion insertion and extraction.     

微乳液合成胶体CuO/γ-Al_2O_3及其催化芳香硝基化合物还原(英文)

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

EFFECTS OF ω-ACRYLOYL POLY (ETHYLENE OXIDE) MACROMONOMER ON EMULSIFIER-FREE EMULSI0N COPOLYMERIZATION OF METHYL METHACRYLATE AND n-BUTYL ACRYLATE*

Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.     

硫酸溶液中1,1’-硫代羰基二咪唑在碳钢上的吸附及缓蚀影响和碘离子的增强效应

The inhibition effect of 1,1’-thiocarbonyldiimidazole (TCDI) on the corrosion behaviors of mild steel (MS) in 0.5 mol·L -1 H2SO4 solution was studied with the help of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and linear polarization resistance (LPR) techniques. The effect of immersion time on the inhibition effect of TCDI was also investigated over 72 h. For the long-term tests, hydrogen evolution with immersion time (VH2-t) was measured in addition to the three techniques already mentioned. The thermodynamic parameters, such as adsorption equilibrium constant (Kads) and adsorption free energy (⊿Gads) values, were calculated and discussed. To clarify inhibition mechanism, the synergistic effect of iodide ion was also investigated. The potential of zero charge (PZC) of the MS was studied by electrochemical impedance spectroscopy method, and a mechanism of adsorption process was proposed. It was demonstrated that inhibition efficiency increased with the increase in TCDI concentration and synergistically increased in the presence of KI. The inhibition efficiency was discussed in terms of adsorption of inhibitor molecules on the metal surface and protective filmformation.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

Extraction of Thorium(Ⅳ) Using Cextrant 230/Anionic Surfactant Sodium Bis（2-Ethylhexyl）Sulfosuccinate/n-Heptane Microemulsion北大核心CSCD

A stable microemulsion system is constructed by choosing α-aminophosphonate extractant Cextrant 230 and an anionic surfactant sodium bis（2-ethylhexyl）sulfosuccinate（AOT）as the cosurfactants. The effects of some factors such as pH and the concentration of Cextrant 230,AOT,NaOH and the sulfate in the aqueous solution on the maximum water ratio（x0 ）are studied. The process and effects of microemulsion formation are analyzed and the optimized conditions for the stable microemulsion are determined. The Cextrant 230-AOT-n-heptane microemulsion system is applied for the extraction of thorium. The effects of emulsion-to-water volume ratios,the concentrations of Cextrant 230,AOT and sulfate,temperature are studied. The extraction rate of thorium in the microemulsion system increases with the increase of the concentration of Cextrant 230（or AOT）, which is significantly higher than that of AOT-n-heptane microemulsion system. Cextrant 230 and AOT have a synergistic effect on the extraction of thorium. Temperature has little effect on extraction of thorium and the reaction is entropy-driven. Upon the comparison of the stripping of thorium by different inorganic acids, sulfuric acid is chosen as the stripping reagent. The loading capacity for ThO2 is about 1. 43 g/L. This microemulsion system is applied to the separation of Th from the actual bastnaesite sulfate leach liquid after the cerium extraction and the thorium content can be reduced to less than 0. 1 mg/L. The microemulsion system has both the advantages of thermodynamic stability and high efficiency. © 2022, Science Press (China). All rights reserved.     

Effect of Addition of Cosurfactant on the Phase Behaviour of Oil-in-water Aminosilicone Oil Microemulsion

Stable and transparent aminosilicone oil microemulsion of the average particle size below 0.05 micron was prepared. The interaction of the aminosilicone oil, water, complex surfactants and cosurfactant was studied by part pseudotemary phase diagram. The effect of cosurfactants (such as alcohol) and the mechanism of its effect on the phase behaviour of the pseudotemary system were investigated.     

CRYSTALLIZATION BEHAVIOR OF PURE AND ADDITIVE-CONTAINING POLY (ETHYLENE TEREPHTHALATE)

The isothermal crystallization of poly (ethylene terephthalate ) (PET),which is free of catalyst, stabilizer, oligomer and diethylene glycol (DEG), was studied by DSC. The crystallization behaviour of pure PET is different from commercial PET and a reasonable explanation is presented. The influences of catalyst, stabilizer, oligomer and DEG on the crystallization of pure PET were examined. It is shown that catalyst (Manganese acetate)and stabilizer (Triphenyl phosphite) result in an increase of the crystallization rate of PET; on the contrary, DEG and oligomer (cyclotetramer) result in a reduction of the crystallization rate. When catalyst and stabilizer coexist together, both of them promote the crystallization at lower temperature ,only a smaller effect was found at higher temperature, it is evident that metal phosphite is formed between the catalyst and stabilizer at higher temperature.     

[SiCu(H2O)W11O39]6-在玻碳电极上的多层组装及电催化性能

The electrochemical behavior of SiCu W11 heteropolyacide in acidic aqueous solution was studied. The effect of solution pH on the electrochemical behavior of SiCu W11 was discussed and the mechanism was suggested. New electrode was modified by muhilayer films composed of heteropolyanion (SiCu W11 and cationic polymer poly (diallyldimethylammonium chloride). Cyclic vohammetry showed the uniform growth of the film. The modified electrodes exhibited some special electrochemical properties in the films, different from those in homogeneous aqueous solutions. The effect of pH on the redox behavior of SiCu W11 in the films was discussed in details. The muhilayer film electrodes have an excellent electrocatalytic response to the reduction of BrO3^- and NO2^-.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

EFFECTS OF L-PHENYLALANINE ON THE RADIATION SYNTHESIS OF POLY(N,N''''-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE)(MICRO)GELS

The effects of L-phenylalanine(L-Phe)on the synthesis of poly(N,N'-methylenebisacrylamide-co-4-vinylpyridine) (poly(Bis-co-4-VP))(micro)gels by γ-ray irradiation were studied.The addition of L-Phe could not only decrease the gelation dose(D_g)of the synthesis obviously,but also transform the morphology of copolymer from microgel to gel.In addition,the swelling ability of the(micro)gels was also affected in the presence of L-Phe.The decrease of D_g was ascribed to the effect of pH,while the transformation of the morphology was ascribed to the effect of L-Phe on the stability of the poly(Bis-co-4-VP)microgel.Such an effect was confirmed further as compared with the effects of L-alanine,L-glutamic acid,L-arginine,sulfuric acid and aqueous ammonia.     

N，N，N′，N′-四丁基丙二酰胺从硝酸盐介质中萃取铈(Ⅲ)

Study on the extraction and separation of rare earth with new extractants is important in the rare earth chemistry and nuclear reprocessing. In this work， the extraction of Ce(Ⅲ) with N，N，N′，N′-tetrabutylmalonamide (TBMA) in toluene from nitrate media has been investigated. The effect of the concentration of nitric acid， TBMA and salt-ing-out agent (LiNO₃) and also the temperature on the distribution ratios was examined. The stoichiometries of the extracted complexes were determined to be Ce(NO₃)₃·3TBMA and Ce(NO₃)₃·4TBMA， respectively. The ap-parent extraction constants and the enthalpy of the extraction were calculated based on the extraction data， which are logK_ex1=3.97， logK_ex2=4.75 and Δ_rH_m^?=-31.25kJ·mol^-1， respectively. The IR spectra of the loaded organic phase supported the suggested extraction mechanism.     

Studies on the effect of surfactants on the extraction rate by laser thermal lens spectrometry

The effect of different kinds of surfactants on the extraction process of Nile Blue-I- was investigated by laser thermal lens spectrometry . It was shown that the surfactants could accelerate or decelerate the extraction rate by varying the extractive's solubility and the interfacial tension of the extraction solution. The higher the concentration of surfactants was, the more obvious the effect.     

MICELLIZATION STUDIES OF DODECYL BENZENESULFONIC ACID AND ITS INTERACTION WITH POLYVINYLPYRROLIDONE

Dodecyl benzenesulfonic acid (DBSA) surfactant was used in the present study to find the effect of concentration on its electrical conductance in solution from 293-323K above and below the critical micelle concentration (CMC). The micellization parameters i.e. degree of counter ion binding (β), aggregation number (n) and number of counter ion micelle(m) were measured. The interaction of DBSA with polyvinylpyrrolidone (PVP) was also studied at 293K throughconductance and surface tension measure ments. A number of important parameters i.e. critical aggregation concentration (CAC), Gibb‘s free energy (△G) and binding ratio (R) were determined and the effect of NaCl on the CAC and polymer saturation point (PSP) was also investigated.     

THERMAL ACTIVATION OF IMMOBILIZED PAPAIN

Papain (Papainase, EC 3.4.22.2) was immobilized on porous silica beadsby cross linking with glutaraldehyde. The thermal activation of this immobilized papainin aqueous system was found at a temperature range from 50 to 90℃. The higher thetemperature, the more active the immobilized papain will possess. At the same time,the durability of the immobilized papain on heating was greatly improved. The effect ofadditives and salts on the activity of the immobilized papain were also studied. The resultsshowed that the additives and some of the salts studied could markedly enhance the activityof the immobilized papain at elevated temperature.     

Organic solvent enhanced α-helical formation of a nonadecapeptide derived from Trichosanthin (TCS 182-200)

A model peptide,TDK,was studied by circular dichroism to elucidate the effect of organic solvent on α-helical formation.The α-helicities enhanced by various alcohol solvents,especially fluorine-substituted alcohols were systematically compared.The relations between α-helical formation of a peptide and external environment were also discussed in detail.These environmental elements mainly include hydrophobicity dielectric constant and acidity of the solvents.