Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

电流变液中悬浮颗粒的体积与形状的变化

基于偶极近似,运用电极化方法,定量研究了电流变液中悬浮颗粒在外电场作用下其体积和形状的变化,并计算了其体积和形状的相对变化率.研究结果表明:悬浮颗粒的体积和形状的相对变化率均与电场强度的平方成正比,并与ER本身的性质有关.一般情况下,颗粒的体积和形状的相对变化率分别为8.4%和12.5%,对总体积变化率的贡献为1.68%.这种变化对于ER系统的电涨和电热都作出了贡献,仅当将颗粒当作刚性球时,其自由能才与电场强度的平方成正比.     

Phenolic potential of Tannat, Cabernet-Sauvignon and Merlot grapes and their correspondence with wine composition

The phenolic potential of Tannat, Cabernet-Sauvignon and Merlot grapes was evaluated in 2001 and 2002 and its correspondence with the colour and composition of the respective wines was established. Three vineyards of each variety, situated in the south of Uruguay were considered. Two samples of each vineyard were taken at the moment of the harvest. Phenolic richness, extractable anthocyanins contents and total potential in anthocyanins of the grapes were estimated. Two fermentations on skins were carried out for each vineyard using 50 kg of grape in each one. The anthocyanic and total polyphenols contents of the musts were analysed every 24 h, and skins extractions were carried out in parallel in the laboratory. The duration of the maceration for each variety was decided in function of the analytical results in the grapes, musts and skins extractions. Wines were analysed 2 months after the alcoholic fermentation, determining its phenolic composition and colour. Tannat grapes presented anthocyanic and total polyphenols contents significantly higher in both years. Therefore, wines from this variety presented colour intensity and phenolic contents statistically higher than Cabernet-Sauvignon and Merlot. The correlations between the phenolic contents of the grapes, skins, musts and wines were very significant. Colour intensity and phenolic contents of the wines were highly correlated with the total polyphenols of the grapes and with anthocyanins of the grapes, skins, musts and wines. The estimate of the phenolic potential of the grapes and the extractability of the pigments allows to manage more adequately the fermentation on skins and is an interesting tool to predict the colour and the composition of the wines.     

PROPERTIES AND MORPHOLOGY OF UNSATURATED POLYESTER/ACRYLATE-TERMINATED POLYURETHANE/ORGANOMONTMORILLONITE NANOCOMPOSITES

Unsaturated polyester resin （UPR）/acrylate-terminated polyurethane （ATPU）/organo-modified montmorillonite （OMMT） nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prepared by the sequential mixing, i.e. mixture of the ATPU and styrene （S） and OMMT were prepared in the first step; UPR was then added to the pre-intercalates of ATPU/S/OMMT. Results indicate that the mechanical properties and thermal properties of UPR/ATPU/OMMT nanocomposites greatly depend on the amount of ATPU and OMMT. Results show that the addition of ATPU could increase the impact strength of UPR/ATPU composites, but the tensile strength, flexural strength and heat resistance of the materials are obviously decreased. When the weight ratio between UPR, ATPU and OMMT were 82：15：3, the impact strength and heat distortion-temperature of nanocomposite were greatly improved, meanwhile there was little change for other properties of the nanocomposites. The synergistic enhancement effects of ATPU and OMMT on the composites were observed. The structures and morphology of the composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

The kinetic parameters of the exothermic decomposition reaction of the title compound in a temperature-programmed mode have been studied by means of DSC. The DSC data obtained are fitted to the integral, differential and exothermic rate equations by linear least-squares, iterative, combined dichotomous and least-squares methods, respectively. After establishing the most probable general expression of differential and integral mechanism functions by the logical choice method, the corresponding values of the apparent activation energy (Ea), pre-exponential factor (A) and reaction order (n) will be obtained by the exothermic rate equation. The results show that the empirical kinetic model function in differential form and the values of Ea and A of this reaction are (1-α)0.44, 230.4 kJ/mol and 1018.16 s-1, respectively. With the help of the heating rate and obtained kinelic parameters, the kinetic equation of the exothermic decomposition reaction process of the title compound is proposed. The critical temperature of thermal explosion of the compound is 302.6℃. The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal change rule of the title compound.     

多弧离子镀TiN与不同金属基材间的接触界面与表面特性

用多弧离子镀技术在不同金属基材上进行TiN镀膜实验,制备了TiN/Fe、 TiN/Cu和TiN/Cr/Cu复合膜.借助扫描电子显微镜(SEM)、 X射线衍射仪(XRD)和光电子能谱(XPS),研究了TiN与Fe、 Cu和Cr/Cu三种不同衬底接触界面的形貌、结构及其表面特性.SEM观察发现,在一定离子镀膜条件下, TiN涂层可与Fe、 Cu和Cr/Cu金属基材形成均匀平整的接触界面,在铜基上TiN界面清晰,在Fe与Cr/Cu界面有明显的层状晶界微结晶分布.XRD分析显示, Fe、 Cu和Cr/Cu表面生成的薄膜都包含TiN、 Ti2N等多晶相,在Cr/Cu界面还包含Ti-Cr的金属间化合物.XPS结果表明,表面除了TiN膜外,还生成TiO2和TiOxNy等氧化膜.Ar+刻蚀5 min后, TiO2消失, TiOxNy减少, TiN则呈增加趋势.TiN与Cr/Cu界面形成明显的Ti-Cr和Cr-Ni互扩散层,这有助于增强薄膜附着力,形成较牢固的TiN涂层.     

Inherent safety evaluation in process plants— a comparison of methodologies

A global population increase and an improved standard of living are generally expected. To meet these demands, an increased production of chemicals will be necessary while protecting human health and the environment. However, most current methods of chemical production are unsustainable. New designs must result in plants that assure process and operator safety, the sustained health of workers and the community, and the protection of the environment. Traditional safety precautions and process controls minimize risk but cannot guarantee the prevention of accidents followed by serious consequences. Therefore, the general approach to environmental and safety problems must be changed from reactive to proactive. One way is to further develop the concept of inherent safety. In this paper some methods for inherent safety evaluations are reviewed. The aim of the study is to analyze the different tools available for inherent safety evaluation and identify the most important criteria in determining the inherent safety of a process plant. A model is proposed to show the interactions of different factors on the inherent safety level of a process and the model is illustrated by a case study.     

燃烧过程中碱/碱土金属对重金属迁移转化影响的研究进展

碱/碱土金属广泛存在于各种固体燃料中，在燃烧过程中碱/碱土金属与燃料中重金属及其他矿物发生复杂的物理化学反应，从而影响重金属的迁移和转化。本研究主要介绍了碱/碱土金属对As、Se、Pb和Cr四种重金属迁移转化的影响规律，包括碱金属和碱土金属对重金属迁移转化的影响，颗粒物团聚与黏结对重金属排放的影响三个方面。碱/碱土金属能够抑制重金属的挥发：碱金属与Cl元素的结合，降低了PbCl₂的生成；碱金属的存在有利于提升高岭土对Pb的吸附效率；碱/碱土金属可以与As和Se形成稳定的化合物。但同时需要注意碱/碱土金属与Cr的部分结合产物中，Cr以六价态存在，具有较高的毒性。碱/碱土金属对于团聚现象发生，分别起到了促进和抑制作用，适当含量的碱金属有利于减少重金属的释放。通过总结碱/碱土金属对重金属迁移转化的影响规律，以期为降低重金属的危害提供思路。     

Spectrophotometric determination of the dissociation constants of crown ethers with grafted acridone unit in methanol based on Benesi-Hildebrand evaluation

As potential chromo- and fluorophores for optical sensors a number of acridone grafted crown ethers containing NO2 group(s) and/or Br or Cl atom(s) in the aromatic rings (compounds) were studied by spectrophotometric method. In the first step of this work the acid-base and complexing properties of these compounds as well as those of the acridone, thioacridone and 4,5-dinitroacridone were investigated. Compounds proved to be very week acids and therefore the conventional spectrophotometric method based on the measurement of the ratio of the protonated/deprotonated forms of the compounds was not applicable for the determination of the dissociation constants (pKa values). Thus, a new spectrophotometric approach was elaborated for the pKa determination of these compounds, which is based on spectrophotometric titration in methanol with strong base and the titration results were evaluated by the Benesi-Hildebrand method. (In the studies with TEAOH, TMAOH and LiOMe, the complex formation between the ionophores and the cations of the bases could be excluded.) As it was expected, the experimentally determined pKa values depended on the nature of the substituents of the acridone moiety and pKa values ranged between 12.6 and 14.9. The lower pKa value of thioacridone compared to the acridone can be explained by the larger size of the sulfur atom. The outstandingly larger pKa value for 4,5-dinitroacridone can be attributed to the formation of intramolecular hydrogen-bonds between the ortho-position nitro group and the NH proton. As a trend, the strong electron withdrawing nitro substituents decreased considerably the pKa values of compounds and compared to that of the halogen (Cl and Br) atoms (for example compounds and) of weaker withdrawing effect.     

Statistical Theory of Stable and Meta-stable Transition for Crystallization and Fusion of Homopolymers Ⅵ. Statistical Dynamics of Polymeric Crystallization by Molecular Segregation-Dependence of Crystal Growth Rate on the Grown Mechanism and Concentratio

First a short review on the dependence of crystal growth rate on the growth mechanism and concentration is present. Based on the structural model of micronucleus and crystal constituent chains, and the feature of statistical dynamics for polymeric crystallization by molecular segregation, a general method for characterizing number the growth rate and micro crystal constituent chains and the size growth rate for crystals was proposed. According to this method, a set of quantitative expressions for correlating the growth rate in number and size with the four types of growth (folding, extending and combination of folding and extending), the crystalline temperature and the crystalline concentration was derived. Then combined the concentration index is combined with the fraction of conformation for segments, a new correlation of the concentration index to the temperature of crystallization and the flexibility of polymeric chain is theoretically obtained. The dependences of the index on the different types of growth are also studied. Finally the relationships between the growth rate for crystals and the concentration of solution were verified by the experimental validating the predictions made by the theory.     

Calculations of the distribution of trace impurities in cylindrical pores

The equilibrium distribution of a trace impurity and the self-diffusion coefficients of molecules of the base component and the trace impurity in narrow cylindrical pores were calculated using the lattice-gas model. Two types of lattice structures with six and eight closest neighbors were considered. The sizes of the base component and impurity molecules were taken to be identical. Lateral interactions were taken into account in the quasi-chemical approximation. The equilibrium distributions of the trace impurity across a pore section in the gas and liquid phases of the base component and at the interface for the case of capillary condensation were considered. The probability of existence of isolated dimeric clusters was estimated and the self-diffusion coefficients of the base component and trace impurity for a single-phase distribution of the base component were calculated. The effects of the energy of interaction of impurities with the pore walls and the concentration of the base component on the diffusion mobility of the impurities were analyzed. The concentration dependences of the partition coefficient for the trace impurity between the pore center and the pore wall and the concentration dependences of the self-diffusion coefficients for the trace impurity molecules become nonmonotonic with an increase in the base component concentration. These effects are due to the displacement of the impurity from the near-surface area to the bulk of a pore following an increase in the pore coverage by the base component and to higher mobility of the impurity in the free bulk of the pore. Further filling of the pore bulk reduces the mobility of all molecules. The energetics of intermolecular interactions also plays a certain role. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 605–615, April, 2000.     

Solubilty and dissolution studies of antifungal drug:hydroxybutenyl-β-cyclodextrin complexes

The solubilities of voriconazole, ketoconazole, and clotrimazole with and without hydroxybutenyl-β-cyclodextrin (HBenBCD) in aqueous media were examined. The solubility of these antifungal drugs was significantly improved by complexation with HBenBCD. Both the pH and the type of buffer used to adjust the medium pH had a very significant effect on drug solubilities and the apparent binding constants of the drug:cyclodextrin complexes. Additionally, the stereochemistry of tartrate buffers was found to influence both the electrostatic interaction between drug and tartrate as well as complexation of the drug-tartrate aggregate by HBenBCD. We also compared the solubilization of these antifungal drugs by HBenBCD to other cyclodextrin derivatives with different substituents under identical experimental conditions and found that the amount of drug solubilized was in some cases influenced strongly by the nature of the cyclodextrin. Solid antifungal drug:HBenBCD complexes were prepared and their dissolution profiles were obtained which showed that HBenBCD improved both the rate of dissolution and the amount of drug dissolved.     

产妇及新生儿头发微量元素检测106例

初步调查106对新生婴儿及其母体头发中的锌、铁、铜、钙含量，同时对不同胎龄及体重进行比较，结果胎发与母发的微量元素有一定差异，这个差异在38周以前就已存在，其具体表明为胎发锌，铁高于母发，铜含量低子母发，钙含量同母发相近，但胎发钙同胎龄及新生儿有正相关关系，其它元素在本调查中无此发现。     

Surface Composition and Surface Energetics of Various Eucalypt Pulps

In this paper we report on our study of the surface chemical composition, surface energy and acid-base characteristics of plantation eucalypt pulps obtained using the kraft, neutral sulphite semichemical (NSSC) and cold soda processes. X-ray photoelectron spectroscopy (XPS) was used to quantify the surface coverages of extractives and lignin. Inverse gas chromatography (IGC) was used to analyse the dispersive component and the acid-base characteristics of the pulp samples. The pulp yield and the total lignin and extractives in the pulp increased in the sequences of kraft, NSSC and cold soda. The relative surface concentrations of extractives and lignin on the pulps (expressed in terms of the ratios of the pulp surface coverage to the total content of these materials in the pulp) did not increase in the same sequence. The relative surface concentrations of lignin and extractives on the kraft pulps were found to be distinctively higher than those of the NSSC and cold soda pulps. The dispersive components of the surface energy of all pulps were similar before extraction, but increased by different degrees after extraction, with that of the cold soda pulp showing the lowest degree of increase. The acid-base characteristics of the pulps were evaluated using the method of acceptor and donor constants described by Schultz and Lavielle and the method of work of adhesion described by Lundqvist and Ödberg. A comparison of these methods has been made. The acidity of all pulps was found to increase after extraction. The degree of increase in pulp acidity is negatively correlated with the surface lignin concentration on the pulps. The low relative acidity of the cold soda pulp is probably associated with its high surface lignin coverage. An experimental model was established to test this hypothesis.     

Thermal Conversion of Heavy Oil Systems and Analysis of Structural Changes of their High Components with PMR Method

Heavy oil systems are thermolyzed with different ratios of amount of resins and asphaltenes: 3.4, 3.8, 5.3, and 12.4. The change in yield and composition of gaseous, liquid and solid products of thermolysis is shown depending on the ratio of the resin: asphaltenes. In the liquid products of thermolysis, resins content decreases and s the amount of asphaltenes and oils increases. According to PMR spectroscopy, the distribution of protons is compared in the secondary resin and asphaltene molecules of the initial samples and the thermolysis products. It is shown that the relative content of hydrogen aromatic rings in the molecules of asphaltenes is higher, and for β- and γ- positions relative to the aromatic rings and heterofunction, it is lower than in the resin molecules.     

表面活性剂与叶酸的相互作用及其对光氧化降解的影响

表面活性剂与有机小分子作用不仅能提高表面活性剂的聚集能力,还能提高小分子的溶解度、稳定性等应用性能,因此研究二者之间的相互作用机理对于促进表面活性剂的发展和实际应用具有重要意义。本工作提出了一种利用功能有机小分子调控表面活性剂聚集行为,进而提高不稳定小分子自身稳定性的新策略。利用表面张力、紫外可见吸收光谱、荧光光谱、动态光散射、等温滴定量热和核磁共振技术研究了在p H为7.0时,叶酸分别与十二烷基硫酸钠(SDS)、十二烷基三甲基溴化铵(DTAB)、季铵盐Gemini 12-6-12和季铵盐线性三聚12-3-12-3-12四种表面活性剂之间的相互作用及其导致的叶酸光氧化降解性能的变化,结果表明,阴离子表面活性剂SDS抑制叶酸光氧化降解的效率较低,而阳离子表面活性剂都能够显著抑制叶酸的光氧化降解,且随着表面活性剂寡聚度的增加,抑制效果增强,所需表面活性剂的浓度显著降低,寡聚表面活性剂12-3-12-3-12的抑制效率高达96%。