The effect of concentration on the thermo-optical properties of colloidal silver nanoparticles

The thermo-optical properties of colloidal silver nanoparticles (AgNPs) are investigated under a low power laser irradiation at 532 nm. Colloidal AgNPs are synthesized by nanosecond pulsed laser ablation of a pure silver plate in distilled water. The morphology and size of the AgNPs are determined by transmission electron microscopy. Closed Z-scan measurements reveal that nonlocal thermo-optic process is responsible for the nonlinear refractive index of colloid containing different concentrations of silver nanoparticles. The Z-scan behavior of the nanoparticle samples has been investigated based on a nonlocal thermo-optic process and it is shown that the aberrant thermal lens model is in excellent agreement with the experimental results. Z-scan measurement fits have allowed the values of nonlinear refractive index (n₂) and thermo-optic coefficients (dn/dt) to be determined at different concentrations of silver nanoparticles. Large enhancement factors were measured for values of n₂ and dn/dt of the colloids at higher silver nanoparticle volume fraction. Our results suggest that nonlocal thermal nonlinear processes will play an important role in the development of photonic applications involving metal nanoparticle colloids.     

A novel polyol method to synthesize colloidal silver nanoparticles by ultrasonic irradiation

A polyol synthesis of silver nanoparticles in the presence of ultrasonic irradiation was compared with other configurations (at ambient temperature, 120 °C, and 120 °C with injected solutions) in the absence of ultrasonic irradiation in order to obtain systematic results for morphology and size distribution. For applying ultrasonic irradiation, rather fine and uniform spherical silver particles (21 ± 3.7 nm) were obtained in a simple (at ambient temperature without mechanical stirring) and fast (within 4 min, 3.61 × 10⁻³ mol min⁻¹) manner than other cases (at ambient temperature (for 8 h, 0.03 × 10⁻³ mol min⁻¹): 86 ± 16.8 nm, 120 °C (for 12 min, 1.16 × 10⁻³ mol min⁻¹): 64 ± 14.9 nm, and 120 °C with injected solutions (during 12 min): 35 ± 6.8 nm; all other cases contained anisotropic shaped particles). Even though the temperature of polyol reaction reached only at 80 °C (<120 °C) in the presence of ultrasonic irradiation, a uniform mixing (i.e. enhanced collision between silver particle and surrounding components) by ultrasonic irradiation might induce a better formation kinetics and morphological uniformity.     

Photoluminescence of CdS nanoparticles embedded in a starch matrix

CdS nanoparticles were synthesized by precipitation in aqueous solution using starch as the capping molecule, and the effect of the pH of the solution on the optical absorption, photoluminescence, and size of the nanoparticles was studied. Absorption spectra, obtained by photoacoustic spectroscopy, indicated that the band gap energy of the crystalline nanoparticles decreased from 2.68 eV down to 2.48 eV by increasing the pH of the solution from 9 up to 14. The X-ray diffraction analysis revealed that the CdS nanoparticles were of zinc blende structure, and that the particle size increased from 1.35 nm up to 2.45 nm with increasing pH. In addition, temperature-dependent photoluminescence (PL) measurements of the capped material showed a blue-shift of the emission peak for temperatures higher than 150 K, indicating the influence of starch on the formation of defect levels on the surface of the CdS nanoparticles.     

Integral fluorescence enhancement by silver nanoparticles controlled via PMMA matrix

The metal-enhanced fluorescence is measured with different thickness of emission film. Silver nanoparticles are immobilized on glass slide by chemical self-assembly method. Rhodamine B molecules are dispersed in the polymer matrix of Poly(methyl methacrylate) (PMMA), then spin coated on prepared silver particles substrate with different thickness from 15 nm to 70 nm. The enhanced fluorescence is observed depending on the thickness of emission film since the average distance between rhodamine B molecules and silver nanoparticles is altered by the PMMA matrix. The 5-fold enhancement is attained. The experiment was explained qualitatively by an integral fluorescence enhancement.     

Green synthesis of silver nanoparticles by Phoma glomerata

We report an extracellular synthesis of silver nanoparticles (SNPs) by Phoma glomerata (MTCC-2210). The fungal filtrate showed rapid synthesis in bright sunlight. The Fourier transform infrared spectroscopy (FTIR) revealed the presence of a protein cap on the silver nanoparticle, which leads to increase stability of SNP in the silver colloid. X-ray diffraction (XRD) analysis showed the number of Bragg's reflection, which are due to the face centered cubic structure of the crystalline SNPs. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), nanoparticle tracking and analysis (NTA) demonstrated the synthesis of polydispersive and spherical SNPs. Energy dispersive X-ray spectroscopy (EDX) was used to confirm the elemental composition of the sample and Zeta potential measurement was carried out to determine the stability of mycofabricated SNPs.The alkaline pH, room temperature, sunlight demonstrated optimum synthesis. Apart from the physical conditions, concentration of silver nitrate and amount of fungal filtrate affects the mycofabrication process. The study of cultural and physical parameters during the mycofabrication of SNPs by P. glomerata will be helpful in order to increase the yield of mycofabricated SNPs of desired shape and size. The process of mycofabrication of SNPs by P. glomerata was found to be eco-friendly, safe and cost-effective nature.     

Assessment of growth of silver nanoparticles synthesized from an ethylene glycol–silver nitrate–polyvinylpyrrolidone solution

The growth of silver nanoparticles synthesized at 27±1 °C from an ethylene glycol–silver nitrate–polyvinylpyrrolidone solution has been assessed using a methodology that combines theoretical calculations based on the Mie Theory with experimental UV/VIS spectra and average particle size determinations from TEM micrographs. A plot of experimental maximum absorbance times bandwidth as a function of the corresponding average particle radius cube gives a curve with two linear portions of significantly different slopes, suggesting that formation of silver particles takes place during two distinct periods. These results and theoretical calculations seem to indicate that particle formation involves a long nucleation-growth period (about 13 h) during which the number of particles increases, followed by growth only, with a constant number of particles. The ratio of theoretical and experimental maximum absorbance indicates that even after 67 h of reaction, only 45% of the initial Ag(I) species has been transformed into silver nanoparticles.     

On 308 nm photofragmentation of the silver nanoparticles

Silver nanoparticles (Ag NPs) were prepared by different chemical methods possessing different sizes 3 ± 2, 8 ± 2, and 20 ± 5 nm. The influence the size of Ag NPs was demonstrated by the absorption and fluorescence spectra, the maximum absorption of Ag NPs increases as the particle size increases. When Ag NPs irradiated with 308 nm excimer laser; the maximum absorption and the full width at half maximum decreased as the number of pulses increased up to 100,000 pulse; due to the size reduction. The fluorescence spectra of Ag NPs and irradiated Ag NPs with 308 nm excimer laser were recorded after excitation at 441.5 nm He-Cd laser, showing a red shift increasing as the particle size is increased.     

PMA capped silver nanoparticles produced by UV-enhanced chemical process

An UV-enhanced single-step chemical bath process has been defined to produce precisely tailored colloidal solutions of silver nanoparticles capped with poly(methacrylic acid) (PMA) for bio-technological and packaging applications. The influence of the main process parameters on the nanoparticles chemical and structural characteristics, as well as on the reactions involved in the nanoparticle growth and polymer cross-linking, has been examined in details. A clear distinction between nanoparticle nucleation and growth, mediated by the available polymer functional groups and steric properties, has allowed to set up an effective controllable process and to obtain the desired colloids. The proper choice of the process parameters has led to a silver nanoparticles size smaller than 20 nm with a distribution peaked at less than 10 nm and stable over a period of one month.     

Localized surface plasmon resonance of silicon compounds adsorbed on silver nanoparticles

A simple method to produce silver nanoparticles on a glass surface from silver nanolayer deposited by magnetron sputtering and thermal annealed is presented. Localized surface plasmon resonance of nanoparticles shows a red shift depending on the silver nanolayer thickness, the refractive index and the thickness of an ultra-thin silicon compound adsorbed on the surface. A highly enhanced Raman spectrum of the characteristic groups of a silicon compound adsorbed on the nanoparticles surface was obtained.     

Third-order nonlinear optical properties of silver nanoparticles mediated by chitosan

Silver nanoparticles in chitosan medium were prepared by the chemical reduction method. Silver nitrate and hydrazine were used as the precursor and reducing agent in the present of chitosan as a natural host polymer. The samples are characterized by UV–visible spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM). The measurements of nonlinear optical properties were defined by Z-scan technique using green CW laser beam operated at 532 nm wavelengths. Thermal effect has a dominant role in the overall material nonlinearity with CW laser. It is shown that the synthesized samples have a negative nonlinear refractive index.     

Synthesis of silver nanoparticles by sonogalvanic replacement on aluminium powder in sodium polyacrylate solutions

The process of the formation of silver nanoparticles (AgNPs) via the method of galvanic replacement (GR) of Ag⁺ with aluminum powder in sodium polyacrylate (NaPA) solutions in the ultrasonic (US) field has been studied. It was observed, that the yellow colloidal solutions of stabilized AgNPs with the absorption maximum at ∼ 410 nm were obtained under the application of US power by 20 W and frequency by 20 kHz in the wide range of AgNO₃ and NaPA concentrations (0.1 – 0.5 mM and 0.5 – 5.0 g/L respectively) at 25 ⁰C. It was shown, that the GR process under US field occurs without of the significant induction period. Using the UV–vis spectroscopy the kinetics of AgNPs formation has been studied and it was observed the first order kinetics with respect to Ag⁺ ions both for the nucleation and growth processes. It was found that observable rate constants of nucleation are close for the all experimental conditions but the observable rate constants of growth decreased with increasing of initial concentration of AgNO₃. Based on the obtained kinetic data it was proposed a mechanism of the formation of AgNPs consisted of the following two main stages: 1) the nucleation with the formation of primary nanoclusters (AgNCs) on aluminum surface followed by their ablation from the surface of the sacrificial metal by ultrasound into bulk of solution; 2) the transformation of AgNCs in AgNPs via growth from the Al surface and / or agglomeration of AgNCs. Using TEM it was found that the size of obtained AgNPs does not exceed of 25 nm and slightly depends on the initial concentrations of precursors. High antimicrobial activity of obtained colloidal solutions against gram-negative and gram-positive bacteria as well as against fungi was observed.     

Catalytic degradation of organic dyes using biosynthesized silver nanoparticles

The green synthesis of metallic nanoparticles paved the way to improve and protect the environment by decreasing the use of toxic chemicals and eliminating biological risks in biomedical applications. Plant mediated synthesis of metal nanoparticles is gaining more importance owing to its simplicity, rapid rate of synthesis of nanoparticles and eco-friendliness. The present article reports an environmentally benign and unexploited method for the synthesis of silver nanocatalysts using Trigonella foenum-graecum seeds, which is a potential source of phytochemicals. The UV–visible absorption spectra of the silver samples exhibited distinct band centered around 400–440 nm. The major phytochemicals present in the seed extract responsible for the formation of silver nanocatalysts are identified using FTIR spectroscopy. The report emphasizes the effect of the size of silver nanoparticles on the degradation rate of hazardous dyes, methyl orange, methylene blue and eosin Y by NaBH₄. The efficiency of silver nanoparticles as a promising candidate for the catalysis of organic dyes by NaBH₄ through the electron transfer process is established in the present study.     

Linear dichroism, produced by thermo-electric alignment of silver nanoparticles on the surface of ion-exchanged glass

A heated Ag⁺-doped glass is subjected to an external constant uniform electric field (E_o > 250 V/cm) parallel to its surface. Absorption spectra studies by linear polarized light imply the induction of a linear dichroism in the samples, after the above-mentioned thermo-electrical process. It is found that the increase in the temperature (400 °C ≤ T ≤ 600 °C), results in the formation of neutral silver multimers and clusters on the samples. Dichroism is the result of simultaneous application of the steady uniform electric field and heating. That is, the process aligns the produced silver nanoparticles along the applied electric field (E_o) during the aggregation of silver nano-clusters via dipole-dipole interaction, leading to the formation of chain-like conductive structures.     

Superhydrophobic conductive textiles with antibacterial property by coating fibers with silver nanoparticles

Silver nanoparticles (Ag NPs) were produced on cotton fibers by reduction of [Ag(NH₃)₂]⁺ complex with glucose. Further modification of the fibers coated by Ag NPs with hexadecyltrimethoxysilane led to superhydrophobic cotton textiles. Scanning electron microscopy images of the textiles showed that the treated fibers were covered with uniform Ag NPs, which generate a dual-size roughness on the textiles favouring the formation of superhydrophobic surfaces, and the Ag NPs formed dense coating around the fibers rendering the intrinsic insulating cotton textiles conductive. Antibacterial test showed that the as-fabricated textiles had high antibacterial activity against the gram-negative bacteria, Escherichia coli. These multifunctional textiles might find applications in biomedical electronic devices.     

Optical properties of monodispersed silver nanoparticles produced via reverse micelle microemulsion

Silver nanoparticles produced by the sodium borohydride reduction of silver nitrate were stabilized by means of 1-dodecanethiol providing sulfur atom. (n-Dodecyl) trimethylammonium bromide (DTAB), which was used as a phase transfer agent in two-phase system involving water and toluene, played a significant role in the formation of monolayer-protected silver nanoparticles. These nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible absorption spectroscopy (UV-vis), FT-IR spectra and fluorescence. The results indicate that the system is monodispersed and leads to the self-assembly of silver nanoparticles into 0-D quanta-dot arrays.     

Sensitivity of styrene oxidation reaction to the catalyst structure of silver nanoparticles

This study shows how different morphologies of silver nanoparticles affect the selective oxidation of styrene in the gas phase using oxygen as oxidant. Silver nanoparticles (nanowires and nanopolyhedra), prepared using the polyol process, were supported on α-Al₂O₃. For comparison, a conventional catalyst obtained by wet impregnation was also prepared. Phenylacetaldehyde (Phe) and styrene oxide (SO) were the main products for nanoparticles catalysts. The promotion effect on the catalytic activity of potassium and cesium on the silver nanowires catalysts was also studied. At 573 K, the styrene conversion and selectivity to styrene oxide with the silver nanowires catalyst were 57.6 and 42.5%, respectively. Silver nanopolyhedra catalyst showed 57.5% conversion and 30.8% selectivity to styrene oxide. The promotion by cesium played an important role in improving the epoxidation of styrene. The samples were structurally characterized using X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) were applied to characterize the oxygen species detected (O_β, O_γ) on the silver surface.     

纳米银粒子的发光特性研究

研究了不同粒径和表面修饰的纳米银粒子的发光特性。研究结果表明,在不同波长光激发下,纳米银粒子在362 nm附近出现较强的发射峰,592和725 nm附近出现较弱的发射峰。随着激发光波长增加,发射峰强度下降,362 nm附近的发射峰红移。纳米银颗粒对210 nm的激发光最为敏感。发射峰波长与纳米银粒子表面修饰状态和颗粒尺寸关系不大,只是随着颗粒尺寸的减小,发射峰强度下降。随着狭缝宽度的减小,发射峰强度下降。随着纳米银胶浓度减少,发射峰逐渐聚拢合并为426 nm的单峰,且发射峰的强度先增强后逐渐下降。通过纳米银粒子表面光电子的吸收-再发射和表面能级杂化探讨了纳米银粒子的发光机理。     

Self-assembled silver nanoparticles in glass microstructured by poling for SERS application

A simple technique to fabricate microchannels in glasses with self-assembled silver nanoparticles (NPs) in the channels is presented. It combines thermal-electric poling of silver-to-sodium ion-exchanged glass slides with a patterned anodic electrode, formation of the microchannels via selective etching off the unpoled slide regions, and hydrogen annealing. The annealing results in the growth of NPs only on the bottom of the channels. The studies performed allowed optimizing the channels’ depth and NPs surface density for Surface Enhanced Raman Scattering (SERS) based sensing and microfluidic applications. We have demonstrated that the formed NPs allow detection of 1/20 of BPE (1,2-Di(4-pyridyl)ethylene 97%) monolayer, the evaluated Raman enhancement factor being ~4·10⁷. The proposed approach based on the glass poling allowed us the fabrication of ~1 μm deep channels and easy multiplication of the structures because the anodic electrodes used for the poling are capable of multiple usage.