Experimental and theoretical spectroscopic studies of ortho derivatives of methyl p-dimethylaminobenzoate

Steady-state spectroscopic studies of two ortho (-OCH₃ and -OH) derivatives of methyl p-dimethylaminobenzoate have been performed. The absorption spectra of molecules under study are analyzed taking into consideration results of quantum chemical semiempirical calculations. The fluorescence spectra of these molecules possess in polar solvents two bands, i.e., the locally excited and intramolecular charge transfer (ICT) fluorescence band. Their intensity ratio as well as the fluorescence/phosphorescence intensity ratio determined at 77 K depends on the solvent polarity. Theoretical studies of the TICT phenomenon have been made in order to explain the dual emission of molecules under study. Calculated electric dipole moments of these molecules in the ground, S₀, and excited, S₁(LE) and S₁(ICT) states, have been compared with experimentally determined data. Theoretically determined transition energies, ΔE_i, oscillator strengths, f_i, and electric dipole moments μ_S0, μ_S1(LE) and μ_S1(ICT) of the planar donor-acceptor (D/A) conformer agree with experimental data. According to Marcus theory inner- and outer-solvatation sphere reorganization energies (λ_out, λ_in) are calculated using the determined spectroscopic properties of molecules under study.     

Temperature dependent analysis of three classes of fluorescence spectra from p-6P nanofiber films

Discontinuous nanofiber films of para-hexaphenylene molecules can be routinely fabricated via vacuum deposition on muscovite mica. The fibers emit upon UV illumination blue fluorescence with excitonic spectral peaks. Their intense fluorescence makes them very attractive for the use in photonic devices, given that the spectra are reproducible for varying surface temperatures. A detailed investigation as a function of surface temperature variation from 300 to 30 K reveals three classes of spectra: (a) spectra with well resolved excitonic peaks, which shift 35 meV to the blue with decreasing temperature, (b) similar spectra with an additional intermediate broadening around 150 K, and (c) excitonic spectra similar to (b), but with a green defect emission band. Quantitative fitting of type (a) spectra results in an exciton-phonon coupling factor of and an average phonon temperature of . The Huang-Rhys factor decreases linearly from 1.2 at 300 K to 1.0 at 30 K. Fitting of type (b) spectra reveals that the apparent intermediate temperature broadening is due to additional fluorescence peaks, the relative importance of which increasing with decreasing temperature.     

Realization of p-ZnO thin films by GaP codoping

An attempt has been made to realize p-ZnO by directly doping (codoping) GaP into ZnO thin films. GaP codoped ZnO thin films of different concentrations (1, 2 and 4 mol%) have been grown by RF magnetron sputtering. The grown films on sapphire substrate have been characterized by X-ray diffraction (XRD), Hall measurement, Photoluminescence (PL) and Energy dispersive spectroscopy (EDS) to validate the p-type conduction. XRD result shows that all the films have been preferentially oriented along (0 0 2) orientation. The decrease of full-width at half maximum (FWHM) with increase in GaP doping depicts the decrease in native donor defects. Hall measurement shows that among the three films, 2 and 4 mol% GaP doped ZnO shows p-conductivity due to the sufficient amount of phosphorous incorporation. It has been found that low resistivity (2.17 Ωcm) and high hole concentration (1.8×10¹⁸ cm⁻³) for 2% GaP codoped ZnO films due to best codoping. The red shift in near-band-edge (NBE) emission and donar-acceptor-pair (DAP) and neutral acceptor bound recombination (A°X) observed by room temperature and low temperature (10 K) PL, respectively, well acknowledged the formation of p-ZnO. The incorporated phosphorous in the film has been also confirmed by EDS analysis.     

Renormalization group approach to a p-wave superconducting model

We present in this work an exact renormalization group (RG) treatment of a one-dimensional p-wave superconductor. The model proposed by Kitaev consists of a chain of spinless fermions with a p-wave gap. It is a paradigmatic model of great actual interest since it presents a weak pairing superconducting phase that has Majorana fermions at the ends of the chain. Those are predicted to be useful for quantum computation. The RG allows to obtain the phase diagram of the model and to study the quantum phase transition from the weak to the strong pairing phase. It yields the attractors of these phases and the critical exponents of the weak to strong pairing transition. We show that the weak pairing phase of the model is governed by a chaotic attractor being non-trivial from both its topological and RG properties. In the strong pairing phase the RG flow is towards a conventional strong coupling fixed point. Finally, we propose an alternative way for obtaining p-wave superconductivity in a one-dimensional system without spin–orbit interaction.     

Deposition and properties of B-N codoped p-type ZnO thin films by RF magnetron sputtering

B-N codoped p-type ZnO thin films have been realized by radio frequency (rf) magnetron sputtering using a mixture of argon and oxygen as sputtering gas. Types of conduction and electrical properties in codoped ZnO films were found to be dependent on oxygen partial pressure ratios in the sputtering gas mixture. When oxygen partial pressure ratio was 70%, the codoped ZnO film showed p-type conduction and had the best electrical properties. Additionally, the p-ZnO/n-Si heterojunction showed a clear p-n diode characteristic. XRD results indicate that the B-N codoped ZnO film prepared in 70% oxygen partial pressure ratio has high crystal quality with (0 0 2) preferential orientation. Meanwhile, the B-N codoped ZnO film has high optical quality and displays the stronger near band edge (NBE) emission in the temperature-dependent photoluminescence spectrum, the acceptor energy level was estimated to be located at 125 meV above the valence band.     

The binding of 3-(p-bromophenyl)-5-methyl-thiohydantoin with human serum albumin: Investigation by fluorescence spectroscopy and molecular model

The binding of 3-(p-bromophenyl)-5-methyl-thiohydantoin (BPMT) with human serum albumin (HSA) was investigated by fluorescence spectroscopy in combination with UV absorption spectrum under physiological conditions. The intrinsic fluorescence of HSA was quenched by BPMT through static quenching mechanism and the fluorescence emission spectrum of HSA exhibited appreciable hypsochromic shift with increasing concentration of BPMT. The binding constants (K) of HSA with BPMT and the number binding sites (n) at different temperatures, thermodynamic parameter enthalpy changes (ΔH) and entropy changes (ΔS) of HSA-BPMT have been calculated according to the relevant fluorescence data, indicating that the hydrophobic interaction played a major role, which was consistent with the result of molecular modeling study.     

Theoretical study of optical and electronic properties of p-terphenyls containing cyano substituents as promising light-emitting materials

Recently, p-terphenyls containing alkoxylated backbones with or without CN groups on either the central phenyl ring or peripheral rings were synthesized and their photo-luminescent properties were studied. Herein, semi-empirical AM1 and density functional theory (DFT) B3LYP calculations with the 6-31G* basis set have been performed to optimize structure for the ground state and the semi-empirical ZINDO calculations have been used to determine the maximum absorption (λ_abs^max) and emission wavelengths (λ_emi) for 19 p-terphenyls. The steric effect is assigned to be responsible for the calculated λ_abs^max and λ_emi shifts and the CN group at the central phenyl with ortho-substitution and at peripheral phenyl rings with para-substitution can also significantly influence these spectra. According to experimental results, the p-terphenyls with CN groups may have a lower energy of LUMO, and thus, we investigated the influence of the substitution position and the number of CN groups on the p-terphenyl moiety. The calculated optical and electronic properties provide important information on the behavior of the corresponding Organic light-emitting diode device (OLED). The suggested theoretical calculation protocol can be employed to predict electro-luminescent characteristics of other materials, and further, to design novel materials for OLED.     

Structural and optical properties of an InxGa1−xN/GaN nanostructure

The structural and optical properties of an In_xGa_1−xN/GaN multi-quantum well (MQW) were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), spectroscopic ellipsometry (SE) and photoluminescence (PL). The MQW structure was grown on c-plane (0 0 0 1)-faced sapphire substrates in a low pressure metalorganic chemical vapor deposition (MOCVD) reactor. The room temperature photoluminescence spectrum exhibited a blue emission at 2.84 eV and a much weaker and broader yellow emission band with a maximum at about 2.30 eV. In addition, the optical gaps and the In concentration of the structure were estimated by direct interpretation of the pseudo-dielectric function spectrum. It was found that the crystal quality of the InGaN epilayer is strongly related with the Si doped GaN layer grown at a high temperature of 1090 °C. The experimental results show that the growth MQW on the high-temperature (HT) GaN buffer layer on the GaN nucleation layer (NL) can be designated as a method that provides a high performance InGaN blue light-emitting diode (LED) structure.     

The Influence of Human Serum Albumin on The Photogeneration of Singlet Oxygen by meso-Tetra(4-Sulfonatophenyl)Porphyrin. An Infrared Phosphorescence Study

meso-Tetra(4-sulfonatophenyl)porphyrin (TPPS₄) is a water soluble photosensitizer, which is currently clinically tested as a PDT drug. In our contribution, we present IR spectral- and time-resolved phosphorescence data reflecting the influence of human serum albumin (HSA) on singlet oxygen photogeneration by TPPS₄. IR emission of TPPS₄ was studied in samples containing various concentrations of HSA in phosphate buffer. The observed changes in spectral and temporal behaviour of TPPS₄ and singlet oxygen phosphorescence caused by the addition of HSA are equivalent to the effect of nitrogen purging of HSA-free solutions of TPPS₄. The main feature induced by addition of HSA appears to be the occurrence of a long-lived (tens of microseconds) photosensitizer phosphorescence at 900 nm besides ordinary short-lived (≈2 μs) one at 820 nm. It is accompanied by presence of a long-lived component of singlet oxygen emission with lifetime roughly corresponding to that of the long photosensitizer phosphorescence component. Moreover, the quantum yield of singlet oxygen phosphorescence decreases with increasing HSA concentration, while total quantum yield of TPPS₄ phosphorescence rises. These facts are explained by a shielding effect of HSA on bound molecules of TPPS₄ against quenching by oxygen which is analogous to oxygen removal by nitrogen purging.     

Cu-codoping inducing the room-temperature magnetism and p-type conductivity of ZnCoO diluted magnetic semiconductor

Successful synthesis of room-temperature ferromagnetic semiconductors, Cu-codoped ZnCoO films are obtained by sol-gel method. It is found that the essential ingredient in achieving room-temperature ferromagnetism is Cu-codoping. By Hall-effect measurement a p-type conductivity was observed for the Cu-codoped films, the hole concentration increases with the increase in Cu concentration. XPS result confirmed Cu ions are univalent in the films, which induced the room-temperature ferromagnetism.     

Resonance-enhanced multiphoton ionization (REMPI) spectroscopy of the Cl and Cl isotopomers of p-chloroanisole

The geometric structures and vibrations of p-chloroanisole isotopomers in the first electronically excited state were studied by mass-analyzed resonance-enhanced two-photon ionization spectroscopy and by theoretical calculations. The band origins of the S₁ ← S₀ electronic transitions of ³⁵Cl and ³⁷Cl isotopomers were found to be equivalent at 34 859 ± 3 cm⁻¹. Assignments of the observed vibrational bands of the two isotopomers were made mainly based on the CIS/cc-PVDZ calculations and on conformity with the available data in the literature. Although the general spectral features of these two isotopomers are similar, the frequencies of some vibrational modes are different. This frequency shift partially depends on the degree of involvement of the chlorine atom in the molecular vibrations.     

Effect of substrate temperature on the morphology, structural and optical properties of Zn1−xCoxO thin films

Zn_1−xCo_xO thin films with c-axis preferred orientation were deposited on sapphire (0 0 0 1) by pulsed laser deposition (PLD) technique at different substrate temperatures in an oxygen-deficient ambient. The effect of substrate temperature on the microstructure, morphology and the optical properties of the Zn_1−xCo_xO thin films was studied by means of X-ray diffraction (XRD), atomic force microscopy (AFM), UV-visible-NIR spectrophotometer, fluorescence spectrophotometer. The results showed that the crystallization of the films was promoted as substrate temperature rose. The structure of the samples was not distorted by the Co incorporating into ZnO lattice. The surface roughness of all samples decreased as substrate temperature increased. The Co concentration in the film was higher than in the target. Emission peak near band edge emission of ZnO from the PL spectra of the all samples was quenched because the dopant complexes acted as non-radiative centers. While three emission bands located at 409 nm (3.03 eV), 496 nm (2.5 eV) and 513 nm (2.4 eV) were, respectively, observed from the PL spectra of the four samples. The three emission bands were in relation to Zn interstitials, Zn vacancies and the complex of V_O and Zn_i (V_OZn_i). The quantity of the Zn interstitials maintained invariable basically, while the quantity of the V_OZn_i slightly decreased as substrate temperature increased.     

Low-voltage cathodoluminescence property of Li-doped Gd2−xYxO3:Eu

Cathodoluminescent (CL) spectra of Li-doped Gd_2−xY_xO₃:Eu³⁺ solid-solution (0.0?x?0.8) were investigated at low voltages (300 V-1 kV). The CL intensity is maximum for the composition of x=0.2 and gradually reduces with increasing the amount of substituted Y content. In particular, small (∼100 nm) particles of Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ are obtained by firing the citrate precursors at only 650°C for 18 h. Relative red-emission intensity at 300 V of this phosphor is close to 180% in comparison with that of commercial red phosphor Y₂O₃:Eu³⁺. An increase of firing temperature to 900°C results in 400-600 nm sized spherical particles. At low voltages (300-800 V), the CL emission of 100 nm sized particles is much stronger than that of 400-600 nm sized ones. In contrast, the larger particles exhibit the higher CL emission intensity at high voltages (1-10 kV). Taking into consideration small spherical morphology and effective CL emission, Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ appears to be an efficient phosphor material for low voltage field emission display.     

Optoelectronic properties of Cu1−xPtxFeO2 (0 ≤ x ≤ 0.05) delafossite for p-type transparent conducting oxide

The samples of Cu_1−xPt_xFeO₂ (0 ≤ x ≤ 0.05) delafossite have been synthesized by solid-state reaction method to investigate their optical and electrical properties. The properties of electrical resistivity and Seebeck coefficient were measured in the high temperature ranging from 300 to 960 K, and the Hall effect and the optical properties were measured at room temperature. The obtained results of Seebeck showed the samples are p-type conductor. The optical properties at room temperature exhibited the samples are transparent visible light material with optical direct gap 3.45 eV. The low electrical resistivity, hole mobility and carrier density at room temperature displayed value ranging from 0.29 to 0.08 Ω cm, 1.8 to 8.6 cm²/V s and 1.56 × 10¹⁸ to 4.04 × 10¹⁹ cm⁻³, respectively. The temperature range for transparent visible light is below 820 K because the direct energy gap contains value above 3.1 eV. Consequently, the Cu_1−xPt_xFeO₂ delafossite enhance performance for materials of p-type transparent conducting oxide (TCO) with low electrical resistivity.     

Luminescence and diffuse reflectance studies of biacetyl included within p-tert-butylcalixarenes

Powdered solid samples of biacetyl within p-tert-butylcalix[4]arene and p-tert-butylcalix[6]arene were studied with the use of diffuse reflectance techniques to observe the formation of inclusion complexes of the diketone (probe) and those solid powdered matrixes.In all substrates, room temperature phosphorescence was obtained in air equilibrated samples. The decay times vary greatly and the largest lifetime was obtained for biacetyl/p-tert-butylcalix[4]arene, showing that this host cavity well accommodates biacetyl, this way promoting a significant increase of the triplet emission lifetimes of the diketone.Transient absorption spectra of inclusion complexes show the triplet-triplet absorption of biacetyl in the calix[4]arene case, while the ketyl radical formation is observed in the calix[6]arene case.A lifetime distribution analysis has shown a single band, peaking at 1.9 ms for biacetyl/calix[4]arene indicating a unique emissive species and in accordance with an endo inclusion of the probe within the non-polar cavity of the calixarene. Furthermore, in the calix[6]arene inclusion, the lifetime distribution exhibits two maxima peaking at 40 and 174 μs, showing that in this case the probe is emitting in two different environments, a more confined one within the non-polar cavity of the calixarene, while some others probe molecules emit from a location within the polar lower rim, in accordance with an exo-calix complex formation.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Ag-deposited silica-coated Fe3O4 magnetic nanoparticles catalyzed reduction of p-nitrophenol

In this paper, a novel approach was successfully developed for advanced catalyst Ag-deposited silica-coated Fe₃O₄ magnetic nanoparticles, which possess a silica coated magnetic core and growth active silver nanoparticles on the outer shell using n-butylamine as the reductant of AgNO₃ in ethanol. The as-synthesized nanoparticles have been characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectra (FT-IR), vibration sample magnetometer (VSM), and have been exploited as a solid phase catalyst for the reduction of p-nitrophenol in the presence of NaBH₄ by UV-vis spectrophotometry. The obtained products exhibited monodisperse and bifunctional with high magnetization and excellent catalytic activity towards p-nitrophenol reduction. As a result, the as-obtained nanoparticles showed high performance in catalytic reduction of p-nitrophenol to p-aminophenol with conversion of 95% within 14 min in the presence of an excess amount of NaBH₄, convenient magnetic separability, as well as remained activity after recycled more than 6 times. The Fe₃O₄@SiO₂-Ag functional nanostructure could hold great promise for various catalytic reactions.     

Study of interaction of butyl p-hydroxybenzoate with human serum albumin by molecular modeling and multi-spectroscopic method

Study of the interaction between butyl p-hydroxybenzoate (butoben) and human serum albumin (HSA) has been performed by molecular modeling and multi-spectroscopic method. The interaction mechanism was predicted through molecular modeling first, then the binding parameters were confirmed using a series of spectroscopic methods, including fluorescence spectroscopy, UV-visible absorbance spectroscopy, circular dichroism (CD) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. The thermodynamic parameters of the reaction, standard enthalpy ΔH⁰ and entropy ΔS⁰, have been calculated to be −29.52 kJ mol⁻¹ and −24.23 J mol⁻¹ K⁻¹, respectively, according to the Van’t Hoff equation, which suggests the van der Waals force and hydrogen bonds are the predominant intermolecular forces in stabilizing the butoben-HSA complex. Results obtained by spectroscopic methods are consistent with that of the molecular modeling study. In addition, alteration of secondary structure of HSA in the presence of butoben was evaluated using the data obtained from UV-visible absorbance, CD and FT-IR spectroscopies.     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.