Characterization, EPR and luminescence studies of ZnAl2O4:Mn phosphors

ZnAl₂O₄:Mn green light emitting powder phosphors have been prepared by urea combustion technique involving furnace temperatures about 500 °C in a short time (<5 min). The prepared powders were characterized by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectrometry and the surface area measurements by a Brunauer-Emmet-Teller (BET) adsorption isotherms. The EPR spectrum exhibits a resonance signal at g≈2.0, which shows a six-line hyperfine structure (hfs). From the EPR spectra the spin-Hamiltonian parameters have been evaluated at room temperature as well as at 110 K. EPR and photoluminescence (PL) studies revealed that manganese ions were present in divalent state and the site symmetry around Mn²⁺ ions is distorted tetrahedral. The spin concentration (N), the paramagnetic susceptibility (χ) and the zero-field splitting parameter (D) have been evaluated and discussed. The green emission at 511 nm in ZnAl₂O₄:Mn phosphor is assigned to a transition from the upper ⁴T₁→⁶A₁ ground state of Mn²⁺ ions.     

EPR, luminescence and IR studies of Mn activated ZnGa2O4 phosphor

Electron paramagnetic resonance (EPR), luminescence and infrared spectra of Mn²⁺ ions doped in zinc gallate (ZnGa₂O₄) powder phosphor have been studied. The EPR spectra have been recorded for zinc gallate phosphor doped with different concentrations of Mn²⁺ ions. The EPR spectra exhibit characteristic spectrum of Mn²⁺ ions (S=I=5/2) with a sextet hyperfine pattern, centered at g_eff=2.00. At higher concentrations of Mn²⁺ ions, the intensity of the resonance signals decreases. The number of spins participating in the resonance has been measured as a function of temperature and the activation energy (E_a) is calculated. The EPR spectra of ZnGa₂O₄: Mn²⁺ have been recorded at various temperatures. From the EPR data, the paramagnetic susceptibility (χ) at various temperatures, the Curie constant (C) and the Curie temperature (θ) have been evaluated. The emission spectrum of ZnGa₂O₄: Mn²⁺ (0.08 mol%) exhibits two bands centered at 468 and 502 nm. The band observed at 502 nm is attributed to ⁴T₁→⁶A₁ transition of Mn²⁺ ions. The band observed at 468 nm is attributed to the trap-state transitions. The excitation spectrum exhibits two bands centered at 228 and 280 nm. The strong band at 228 nm is attributed to host-lattice absorption and the weak band at 280 nm is attributed to the charge-transfer absorption or d⁵→d⁴s transition band. The observed bands in the FT-IR spectrum are assigned to the stretching vibrations of M-O groups at octahedral and tetrahedral sites.     

A rapid combustion process for the preparation of MgSrAl10O17:Eu phosphor and related luminescence and defect investigations

Blue-emitting europium-ion-doped MgSrAl₁₀O₁₇ phosphor, prepared using the combustion method, is described. An efficient phosphor can be prepared by this method in a muffle furnace maintained at 500 °C in a very short time of few minutes. The phosphor is characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy and BET surface area measurements. Photoluminescence (PL) spectra revealed that europium ions were present in divalent oxidation state. The thermoluminescence (TL) glow curve shows two peaks at around 178 and at 354 °C. The defect centres formed in the phosphor are studied using electron spin resonance (ESR). The ESR spectrum indicates the presence of Fe³⁺ ions in the non-irradiated system. Irradiated MgSrAl₁₀O₁₇:Eu exhibits lines due to radiation-sensitive Fe³⁺ ion and a defect centre. The centre is characterized by an isotropic g-value of 2.0012 and is assigned to a F⁺ centre. The radiation-sensitive Fe³⁺ ion appears to correlate with the main TL peak at 178 °C. During irradiation an electron is released from Fe²⁺ and is trapped at an anion vacancy to form F⁺ centre. During heating, an electron is liberated from the defect centre and recombines with Fe³⁺ emitting light.     

EPR and luminescence properties of LiGa5O8:Mn green emitting phosphor

Green emitting LiGa₅O₈:Mn powder phosphor has been prepared in a short time by solution combustion method. Powder X-ray diffraction pattern indicated a dominant phase of LiGa₅O₈ with another secondary LiGaO₂ phase. Morphology aspects were studied by using field emission scanning electron microscopy. Upon UV light excitation (296 nm), the phosphor exhibits a strong green luminescence (510 nm), which corresponds to the ⁴T₁→⁶A₁ transition of Mn²⁺ ions in an environment close to tetrahedral symmetry. EPR spectrum exhibits resonance signals characteristic of Mn²⁺ ions. It is observed that the spin-Hamiltonian parameters g and A do not vary with temperature. The magnitude of the hyperfine splitting constant (A) in the present study indicates that there exists a moderately covalent bonding between Mn²⁺ ions and the surrounding ligands. The zero-field splitting parameter (D), spin concentration (N) and paramagnetic susceptibility (χ) have also been evaluated.     

Red emission from Mn on a tetrahedral site in MgSiN2

Solubility and photoluminescence properties of Mn²⁺ in MgSiN₂ host lattice are reported in this paper. X-ray diffraction (XRD) analysis shows that Mn²⁺ ions can be totally incorporated into MgSiN₂ host lattice, forming a complete solid solution with MnSiN₂. Mn²⁺ on a tetrahedral site exhibits a red emission band in the wavelength range of 550-750 nm in MgSiN₂. The long-wavelength emission of Mn²⁺ despite tetrahedral coordination in MgSiN₂ is attributed to the effect of strong crystal field experienced by Mn²⁺ in a nitrogen coordination environment. Also there exists energy transfer between MgSiN₂ host lattice and Mn²⁺ activator. The potential applications of this phosphor have been pointed out.     

Luminescence studies on SrMgAl10O17:Eu, Dy phosphor crystals

Using urea as fuel, SrMgAl₁₀O₁₇:Eu, Dy phosphor was prepared by a combustion method. Its luminescence properties under ultraviolet (UV) excitation were investigated. Pure SrMgAl₁₀O₁₇ phase was formed by urea-nitrate solution combustion synthesis at 550 °C. The results indicated that the emission spectra of SrMgAl₁₀O₁₇:Eu, Dy has one main peak at 460 nm and one shoulder peak near 516 nm, which are ascribed to two different types of luminescent Eu²⁺ centers existing in the SrMgAl₁₀O₁₇ matrix crystal. The blue luminescence emission of SrMgAl₁₀O₁₇:Eu phosphors was improved under UV excitation by codoping Dy³⁺ ions. The SrMgAl₁₀O₁₇:Eu phosphors showed green afterglow (λ=516 nm) when Dy³⁺ ions were doped. Dy³⁺ ions not only successfully play the role of sensitizer for energy transfer in the system, but also act as trap levels and capture the free holes in the spinel blocks.     

Luminescence and EPR studies of Eu doped BaAl12O19 blue light emitting phosphors

Europium doped BaAl₁₂O₁₉ powder phosphors have been synthesized by combustion process within few minutes. The phosphors have been characterized by XRD, SEM, FT-IR, EPR and PL techniques. The EPR spectrum exhibits an intense resonance signal at g=1.96 characteristic of Eu²⁺ ions. In addition to this two weak resonance signals have been observed at g=2.28 and g=4.86. The population of the spin levels (N) for the resonance signal at g=1.96 is calculated as a function of temperature. By post-treating the phosphor at 1350 °C under a reducing atmosphere, it is observed that the population of spin levels has been increased five times. The excitation spectrum shows a peak at 326 nm with a shoulder at 290 nm. Upon excitation at 326 nm, the emission spectrum exhibits a well defined broad band with maximum at 444 nm emitting a blue light corresponding to 4f⁶5d→4f⁷ transition. The luminescence intensity also has been enhanced to 60% by post-treating the phosphor at 1350 °C under a reducing atmosphere.     

Luminescence properties of Mn doped Zn2SiO4 phosphor films synthesized by combustion CVD

Zn₂SiO₄:Mn²⁺ phosphor films were successfully prepared by a novel combustion chemical vapor deposition (CCVD) method. In the CCVD process, a flammable solution, containing precursor materials, is atomized and sprayed through a specially designed nozzle and ignited to form a combustion flame. This enables crystallized films to be directly deposited onto a substrate in open-atmosphere with no post deposition heat treatment. SEM images indicated that the film deposited at 1200 °C consisted of densely packed particles with a fine grain size of several 100 nm. Strong Photoluminescence (PL) and cathodoluminescence (CL) intensities were observed with Zn₂SiO₄:Mn²⁺ samples deposited at a substrate temperature of 1200 °C exhibiting the best crystallinity and highest luminescence. The optimum doping level for films deposited using CCVD was found to be ∼4 mol% Mn²⁺ of starting concentration, with a maximum CL luminescence equivalent to 53% of the luminescence measured from a commercial powder phosphor. A relatively fast CL decay with life time about 0.6-0.7 ms was also observed from these films.     

Photoluminescence and EPR studies of BaMgAl10O17:Eu phosphor with blue-emission synthesized by the solution combustion method

A blue phosphor, BaMgAl₁₀O₁₇:Eu²⁺, has been synthesized in the furnace at a temperature of 500 °C by solution combustion method. The formation of the as-prepared BaMgAl₁₀O₁₇:Eu²⁺ phosphor was confirmed by the powder X-ray diffraction technique. The EPR spectrum exhibited an intense resonance signal centered at g=4.63 at 150 mT along with a number of resonances in the vicinity of g>2.0 and g<2.0. The number of spins participating in resonance (N) and the susceptibility (c) for the resonance signal at g=4.63 have been calculated as a function of temperature. The excitation spectrum of BaMgAl₁₀O₁₇:Eu²⁺ phosphor showed a strong peak near 336 nm (4f⁷ (⁸S)→5d¹(t_2g) transition) with a staircase like structure in the region 376-400 nm owing to crystal field splitting of the Eu²⁺ d-orbital. The 336 nm excitation produced a broad blue emission at 450 nm corresponding to 4f⁶5d→4f⁷ transition. PL studies reveal the two emission centers one at 450 nm and the other at 490 nm in this phosphor.     

Synthesis, luminescence and crystallographic structure of Eu-doped garnet-type yafsoanite Ca3Te2(ZnO4)3

A red-emitting phosphor of Eu³⁺-doped calcium–tellurium–zinc oxide, Ca₃Te₂(ZnO₄)₃, with a garnet-type structure was synthesized by high temperature solid-state reactions. This phosphor exhibited a strong red emission. The photoluminescence excitation spectrum showed that Ca₃Te₂(ZnO₄)₃:Eu³⁺ can be effectively excited by UV–visible light. The property of long-wavelength excitation for this material has a benefit as a red phosphor in application of white light-emitting diodes. The colour coordinates were calculated. The excitation and emission spectra and luminescence decay curves were obtained using a pulsed, tunable, narrowband dye laser. Crystallographic sites and charge compensation mechanism of Eu³⁺ ions were discussed. The emission line from Eu³⁺ in intrinsic crystallographic site in the lattice was located at 579.56 nm. The emission line from Eu³⁺ in another disturbed site, which is created by the defects created by the charge-compensation, was located at 580.88 nm. The disordered crystallographic sites of Eu³⁺ are benefit for their strong red luminescence corresponding to the ⁵D₀→⁷F₂ transition.     

Combustion synthesized MgAl2O4:Cr phosphors—An EPR and optical study

Magnesium aluminate (MgAl₂O₄) doped with trivalent chromium (Cr³⁺) was synthesized by the combustion method. The prepared sample was characterized by X-ray powder diffraction, Brunauer-Emmet-Teller (BET) adsorption isotherms and diffuse-reflectance UV-vis spectroscopy techniques. Electron paramagnetic resonance (EPR) and photoluminescence (PL) studies have been performed at room temperature and at 110 K. The EPR spectrum exhibit resonance signals at g=5.37, 4.53, 3.82, 2.26 and 1.96 characteristic of Cr³⁺ ions. The luminescence of Cr³⁺-activated MgAl₂O₄ exhibits a red emission peak around 686 nm from the synthesized phosphor particles upon 551 nm excitation. The luminescence is assigned to a transition from the upper ²E_g→⁴A_2g ground state of Cr³⁺ ions. By correlating EPR and optical data the crystal field splitting parameter (D_q), Racah inter-electronic repulsion parameter (B) and the bonding parameters have been evaluated and discussed. The bonding parameters suggests that the ionic nature of Cr³⁺ ions with the ligands and the Cr³⁺ ions are in distorted octrahedral environment.     

Low-temperature synthesis of BaMgAl10O17:Eu blue phosphors

Using H₃BO₃ as the flux, pure BaMgAl₁₀O₁₇:Eu²⁺ (BAM) blue phosphors were successfully prepared via a solid-state reaction. By this approach, well-crystallized submicron BAM particles were obtained at temperatures as low as 1100 °C with a sintering duration of 2 h. The sintering temperature required by this approach was at least 400 °C lower than that required by the conventional solid-state approach for preparing BAM; moreover, the sintering time required by the former approach was also considerably shorter than that required by the latter approach. These factors are expected to lower the cost for large-scale production of BAM phosphors. Crystal structures and luminescence properties of the synthesized samples were characterized by XRD and TG–DTA, and photoluminescence spectroscopy, respectively. The reactivity of an intermediate, BaAl₂O₄, is thought to be the key factor influencing the synthesis temperature for BAM.     

Spectroscopic studies on Fe and Mn doped SrB4O7 glasses

EPR and optical absorption studies on Fe³⁺ and Mn²⁺ doped strontium tetraborate (SrB₄O₇) glasses are carried out at room temperature. The EPR spectrum of the Fe³⁺ doped glass consists of signals with g-values 9.04, 4.22 and 2.04, whereas the EPR spectrum of Mn²⁺ doped glass exhibits a characteristic hyperfine sextet around g=2.0. The spectroscopic analyses of the obtained results confirmed distorted octahedral site symmetry for the Fe³⁺ and Mn²⁺ impurity ions. Crystal field and Racah parameters evaluated from optical absorption spectra are: Dq=790, B=700 and C=3000 cm⁻¹ for Fe³⁺doped glass and Dq=880, B=700 and C=2975 cm⁻¹ for Mn²⁺ doped glass.     

Luminescence properties of Ce and Tb co-activated ZnAl2O4 phosphor

In this study, a solution combustion method was used to prepare green emitting Ce³⁺–Tb³⁺ co-activated ZnAl₂O₄ phosphor. The samples were annealed at 700 °C in air or hydrogen atmosphere to improve their crystallinity and optical properties. X-ray diffraction study confirmed that both as-prepared and post-preparation annealed samples crystallized in the well known cubic spinel structure of ZnAl₂O₄. An agglomeration of irregular platelet-like particles whose surfaces were encrusted with smaller spheroidal particles was confirmed by scanning electron microscopy (SEM). The fluorescence data collected from the annealed samples with different concentrations of Ce³⁺ and Tb³⁺ show the enhanced green emission at 543 nm associated with ⁵D₄→⁷F₅ transitions of Tb³⁺. The enhancement was attributed to energy transfer from Ce³⁺ to Tb³⁺. Possible mechanism of energy transfer via a down conversion process is discussed. Furthermore, cathodoluminescence (CL) intensity degradation of this phosphor was also investigated and the degradation data suggest that the material was chemically stable and the CL intensity was also stable after 10 h of irradiation by a beam of high energy electrons.     

Synthesis and crystal structures and luminescent properties of divalent europium-doped Ba2ZnSi2O7 and BaZn2Si2O7

The monoclinic Ba₂ZnSi₂O₇:Eu²⁺ blue-green-emitting phosphor and the orthorhombic BaZn₂Si₂O₇:Eu²⁺ green-emitting phosphor were prepared by combustion-assisted synthesis method as the fluorescent materials for ultraviolet-light-emitting diodes (UV-LEDs) performed as a light source. The crystallinity and luminescence were investigated using X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. Pure monoclinic Ba₂ZnSi₂O₇ and orthorhombic BaZn₂Si₂O₇ crystallize completely at 1100 °C. The doped Eu²⁺ ions did not cause any significant change in the host structure. The emission spectra presented an emission position red shift of up to 16 nm from Ba₂ZnSi₂O₇:Eu²⁺ to BaZn₂Si₂O₇:Eu²⁺. The excitation spectra of Ba₂ZnSi₂O₇:Eu²⁺ and BaZn₂Si₂O₇:Eu²⁺ were broad-banding, extending from 260 to 465 nm, which match the emission of UV-LEDs.     

A study on the luminescence properties of CaAl2B2O7:Eu phosphor

The blue-emitting CaAl₂B₂O₇:Eu²⁺ phosphor was prepared at 800 °C by a modified solid-state reaction. The results of X-ray powder diffraction (XRD) analysis confirmed the formation of CaAl₂B₂O₇:Eu²⁺. Photoluminescence (PL) spectroscopy showed that the phosphor could be excited efficiently by UV-vis light from 250 to 410 nm, and exhibit blue emission (460 nm). The emission intensity of CaAl₂B₂O₇:Eu²⁺ phosphor varies with the increase of Eu²⁺concentration. The mechanism of resonance-type energy transfer from Eu²⁺ to Eu²⁺ was established to be electric multipole-multipole interaction. TEM images showed that the grain size of CaAl₂B₂O₇:Eu²⁺ is about 45 nm, which is in full agreement with the theoretical calculation data from the XRD patterns.     

EPR and photoluminescence properties of green light emitting LaAl11O18:Mn phosphors

The LaAl₁₁O₁₈:Mn²⁺ powder phosphor has been prepared using a self-propagating synthesis. Formation and homogeneity of the LaAl₁₁O₁₈:Mn²⁺ phosphor has been verified by X-ray diffraction and energy dispersive X-ray analysis respectively. The EPR spectra of Mn²⁺ ions exhibit resonance signals with effective g values at g≈4.8 and g≈1.978. The signal at g≈1.978 exhibits six-line hyperfine structure and is due to Mn²⁺ ions in an environment close to tetrahedral symmetry, whereas the resonance at g≈4.8 is attributed to the rhombic surroundings of the Mn²⁺ ions. It is observed that the number of spins participating in resonance for g≈1.978 increases with decreasing temperature obeying the Boltzmann law. Upon 451 nm excitation, the photoluminescence spectrum exhibits a green emission peak at 514 nm due to ⁴T₁ (G)→⁶A₁ (S) transition of Mn²⁺ ions. The crystal field parameter Dq and Racah inter-electronic repulsion parameters B and C have been evaluated from the excitation spectrum.     

Effects of the surface coating of BaMgAl10O17:Eu phosphor with SiO2 nano-particles

BaMgAl₁₀O₁₇:Eu²⁺(BAM) phosphors were coated with SiO₂ nano-particles by a modified sol-gel method. In order to elucidate the effects of SiO₂ coating onto BAM phosphor, the luminescent decay time is measured before and after SiO₂ coating. It was revealed that surface coating of BAM phosphors with SiO₂ leads to an increase in luminescent decay time and quantum efficiency, due to the suppression of nonradiative decay via surface defects. The experimental results suggest that the nonradiative decay via surface defects is an important relaxation process, related to the optical properties of display devices such as plasma display panels (PDP) and lamps.     

Synthesis and optical characterization of Gd2O3:Eu nanocrystals: surface states and VUV excitation

This paper reports on the synthesis and characterization of Gd₂O₃:Eu³⁺ nanocrystals of different sizes. The particles have been synthesized by a sol-lyophilization process. This methods allows the synthesis of 7–100 nm diameter cubic-phase particles. The photoluminescence properties have been studied with different excitation from X-ray to VUV and visible wavelengths. Compared to the properties of the bulk materials, some important changes on the luminescence are observed. In particular some bands are strengthened when the size of the particles is diminished. We could therefore ascribe this bands to doping ions on a site close to the surface. Also a very low efficiency of excitation for small particles is observed when exciting with X-ray or high-energy VUV photons (i.e. when exciting the host matrix) compared to the efficiency obtained when exciting in the charge transfer band or in the doping ions related states.     

Searching for the dopant ion in Eu-activated BaMgAl10O17 phosphor with synchrotron diffraction

Searching for the multiple sites predicted in the literature for the europium activator in the BaMgAl₁₀O₁₇:Eu²⁺ phosphor, we undertook a detailed structural study using synchrotron powder diffraction. Three different positions were found for Eu²⁺ in the Beevers-Ross site, near the mid-oxygen position and in substitution for the interblocks Al-O-Al bridge. By favoring the migration of the activator ion, the resulting vacancies in the Beevers-Ross sites may be a major cause of the degradation of the phosphor.