Synthesis of Fe3O4 nanocrystals using hydrothermal approach

Magnetite (Fe₃O₄) nanocrystals were synthesized using a facile hydrothermal method. FeCl₂, FeCl₃ and NaOH with a molar ratio of 1:2:8 were added into an autoclave and this was followed by heat treatment at elevated temperature (100, 150 and 200 °C). The produced results show that the average crystallite and the physical size of the resulting Fe₃O₄ nanocrystals increased with the hydrothermal temperature. The Fe₃O₄ nanocrystals exhibited superparamagnetic behavior. The saturation magnetization and coercivity of the produced nanocrystals also increased with the hydrothermal temperature.     

Synthesis and characterization of functionalized core-shell γFe2O3-SiO2 nanoparticles

Amino and/or polyethyleneglycol (PEG) functionalized core-shell γFe₂O₃-SiO₂ magnetic nanoparticles were synthesized and characterized. Amino-PEG-functionalized core-shell nanoparticles have calibrated sizes and a good colloidal stability. These bi-functionalized core-shell nanoparticles are potentially useful as biocompatible particles for magnetically targeted chemotherapy.     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Synthesis of Co-Cu-Zn doped Fe3O4 nanoparticles with tunable morphology and magnetic properties

Co-Cu-Zn doped Fe₃O₄ nanoparticles can be successfully synthesized using a simple method. The particles in the size range 20−400 nm with different regular shapes i.e. sphere-like, regular hexane and tetrahedron are controllably achieved by changing the metal ion concentration. Compared to pure Fe₃O₄ without dopants, Co-Cu-Zn doped Fe₃O₄ nanoparticles exhibit better microwave absorbing properties at 2−18 GHz. Among three Co-Cu-Zn doped Fe₃O₄ nanoparticles with different morphologies, tetrahedral Co-Cu-Zn doped Fe₃O₄ nanoparticles represent a better dielectric loss in high frequency range. This work is believed the first known report of Co-Cu-Zn doped Fe₃O₄ nanoparticles with tunable morphology and magnetic properties through the hydrothermal process without using any organic solvents, organic metal salts or surfactants.     

Focusing of Fe3O4 nanoparticles using a rotating magnetic field in various environments

The paper shows the application of a new method – Magnetic Nanoparticles Focusing 3D, MNF-3D – for focusing of magnetic nanoparticles at any point in a three-dimensional space between the rotating magnet system. The results of focusing process of nanoparticles in water, human blood, human serum and polyurethane sponge are presented. Additionally, blood flow was also considered. The effectiveness of nanoparticle focusing was monitored optically and quantitatively by electron spin resonance method. The method enabled focusing of magnetic nanoparticles within a few minutes in different environments. A good efficiency of focusing process was observed for all the samples.     

Optical properties of surface-modified Bi2O3 nanoparticles

Stearic acid coated Bi₂O₃ nanoparticles in the size range of 5-13 nm were synthesized by the microemulsion method. HRTEM showed that the morphology of Bi₂O₃ nanoparticles was ellipsoidal. The absorption edge of Bi₂O₃ nanoparticles showed a blue shift of ∼0.45 eV, comparing with that of the bulk Bi₂O₃. At room temperature, Bi₂O₃ nanoparticles also showed a strong luminescence at 397 and 420 nm, depending on the excitation wavelength.     

Preparation and luminescent properties of BaCa2Si3O9:Eu

A blue emitting phosphor of the triclinic BaCa₂Si₃O₉:Eu²⁺ was prepared by the combustion-assisted synthesis method and an efficient blue emission ranging from the ultraviolet to visible was observed. The luminescence and crystallinity were investigated using luminescence spectrometry and X-ray diffractometry (XRD), respectively. The emission spectrum shows a single intensive band centered at 445 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The excitation spectrum is a broad extending from 260 to 450 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in BaCa₂Si₃O₉:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole-dipole interaction. The CIE of the optimized sample Ba_0.95Ca₂Si₃O₉:Eu_0.05²⁺ was (x, y)=(0.164, 0.111). The result indicates that BaCa₂Si₃O₉:Eu²⁺ can be potentially useful as a UV radiation-converting phosphor for white light-emitting diodes (LEDs).     

Synthesis and magnetic properties of antiferromagnetic Co3O4 nanoparticles

Antiferromagnetic Co₃O₄ nanoparticles with diameter around 30 nm have been synthesized by a solution-based method. The phase identification by the wide-angle X-ray powder diffraction indicates that the Co₃O₄ nanoparticle has a cubic spinel structure with a lattice constant of 0.80843(2) nm. The image of field emission scanning electron microscope shows that the nanoparticles are assembled together to form nanorods. The magnetic properties of Co₃O₄ fine particles have been measured by a superconducting quantum interference device magnetometer. A deviation of the Néel temperature from the bulk is observed, which can be well described by the theory of finite-size scaling. An enhanced coercivity as well as a loop shift are observed in the field-cooled hysteresis loop. The exchange bias field decreases with increasing temperature and diminishes at the Néel temperature. The training effect and the opening of the loop reveal the existence of the spin-glass-like surface spins.     

Structural properties of amorphous Fe2O3 nanoparticles

We have investigated the microstructure of amorphous Fe₂O₃ nanoparticles by using molecular dynamics (MD) simulations. Non-periodic boundary conditions with Born-Mayer type pair potentials were used to simulate a spherical model of different diameters of 2, 3, 4 and 5 nm. Structural properties of an amorphous model obtained at 350 K have been analyzed in detail through the partial radial distribution functions (PRPFs), coordination number distributions, bond-angle distributions and interatomic distances. Calculations showed that structural characteristics of the model are in qualitative agreement with the experimental data. The observation of a large amount of structural defects as the particle size is decreased suggested that surface structure strongly depends on the size of nanoparticles. In addition, surface structure of amorphous Fe₂O₃ nanoparticles have been studied and compared with that observed in the core and in the bulk counterpart. Radial density profiles and stoichiometry in morphous Fe₂O₃ nanoparticles were also found and discussed.     

A study of modified Fe3O4 nanoparticles for the synthesis of ionic ferrofluids

XRD and XPS analyses revealed that a Fe(NO₃)₃·9H₂O layer formed outside γ-Fe₂O₃ particles when Fe₃O₄ nanoparticles were treated with ferric nitrate. The particle density differed for untreated and treated particles and was not uniform for the latter. The specific saturation magnetization of both treated and untreated particles was used to estimate the thickness of the Fe(NO₃)₃·9H₂O layer and the average density of the treated particles. The density of the treated particles was used to calculate the density of ferrofluids of different particle volume fractions. These values are in agreement with measured results. Therefore, the particle volume fraction can be designed to synthesize acid ionic ferrofluids based on Fe₃O₄ nanoparticles using Massart's method.     

Suppression of low-temperature magnetic states in Mn3O4 nanoparticles

We have investigated the low-temperature magnetic properties of Mn₃O₄ nanoparticles using thermodynamic and magnetic measurements. While bulk Mn₃O₄ exhibits three magnetic transitions close to 42, 40 and 34 K, the two lower temperature transitions appear to be absent above 15 K in Mn₃O₄ nanoparticles. The magnetization and spin entropy associated with the ferrimagnetic transition at 42 K is smaller in the Mn₃O₄ nanoparticles than bulk Mn₃O₄, which is consistent with roughly 30-50% of the spins not contributing to the magnetic order. We tentatively attribute this suppression of the lower temperature transitions to a combination of finite size effects and effects arising from amorphous surface spins on the nanoparticles.     

Microwave dielectric and magnetic properties of superparamagnetic 8-nm Fe3O4 nanoparticles

The superparamagnetic 8-nm Fe₃O₄ nanoparticles were successfully prepared by chemical oxidation process. For the complex permittivity, the dual dielectric relaxation processes have been proved by two overlapped Cole–Cole semicircles, and the natural resonance frequency is 3.03 GHz for the complex permeability. The maximum reflection loss value reaches −55.5 dB at 6.11 GHz with 3.85 mm in the thickness of the absorbers for the superparamagnetic 8-nm Fe₃O₄ nanoparticles which is better than that of 150 nm and 30 nm Fe₃O₄ nanoparticles. It is believed that the superparamagnetic 8-nm Fe₃O₄ nanoparticles can be used as a kind of candidate for microwave absorber.     

Influence of organic precursor on the structural and magnetic properties of Co3O4 nanoparticles

Antiferromagnetic Co₃O₄ nanoparticles were synthesized by the coprecipitation method. With the addition of the sucrose as chelating agent (sucrose) the size of the particles was reduced from 54 nm to 19 nm. The Co₃O₄ nanoparticles exhibit a cubic spinel structure identified for X-ray diffraction (XRD) and confirmed by Rietveld refinement. Scanning Electron Microscopy (SEM) images exhibit a spherical-like morphology and confirm the decrease of the particle size observed by XRD. The magnetic measurements as a function of temperature using a superconducting quantum interference device (SQUID) show a large surface anisotropy for samples obtained with the addition of sucrose accompanied by an exchange Bias effect indicating also the existence of a weak ferromagnetism. A decrease of the Néel temperature from the bulk (and other nanostructures-type) was observed, which can be associated with finite-size effect in the nanoparticles' shape.     

Silica-coated Y2O3:Eu nanoparticles and their luminescence properties

Crystalline Y₂O₃:Eu is of paramount significance in rare earth materials and research on luminescence spectra. In this work, the nanocrystalline Y₂O₃:Eu was coated with silica by a facile solid state reaction method at room temperature. The transmission electron microscope (TEM) photographs showed that the prepared Y₂O₃:Eu particle is polycrystalline with the size of 20 nm, the size of silica-coated particle is about 25 nm. The XPS spectra indicated that the silica layer is likely to interact with Y₂O₃:Eu by a Si-O-Y chemical bond. The luminescence spectra showed that the intensity of ground samples is lower than that of unground ones, the intensity of silica-coated phosphors is higher than that of the ground samples, while almost the same as that of the unground ones. Therefore, the silica coating decreases the surface defects of nanoparticles of the nanocrystalline Y₂O₃:Eu, thus increasing their luminescent intensity.     

Structural and magnetic studies of Fe2O3/SiO2 granular nanocomposites

Fe₂O₃/SiO₂ nanocomposites were synthesized by mechanical alloying, using Fe and SiO₂ powders as precursors. After 340 h milling, the sample essentially consists of hematite and amorphous silica. TEM images show hematite particles embedded in and surrounded by an amorphous silica matrix. A broad size distribution—5–50 nm—of hematite particles is found, and other group of very small—2–3 nm—unidentified particles are observed. Room temperature Mössbauer spectra show a paramagnetic doublet, which may correspond to a non-crystalline phase in the sample (probably the small unidentified particles), and a sextet corresponding to hematite. Magnetic properties were investigated by measuring hysteresis curves at different temperatures (5–300 K) and by zero-field-cooled (ZFC) and field-cooled (FC) magnetization curves (10 mT). The hysteresis loops were well fitted by a ferromagnetic contribution. No evidence of Morin transition is found down to 5 K.     

Synthesis and magnetic properties of CoFe2O4 ferrite nanoparticles

CoFe₂O₄ ferrite nanoparticles were prepared by a modified chemical coprecipitation route. Structural and magnetic properties were systematically investigated. X-ray diffraction results showed that the sample was in single phase with the space group . The results of field-emission scanning electronic microscopy showed that the grains appeared spherical with diameters ranging from 20 to 30 nm. The composition determined by energy-dispersive spectroscopy was stoichiometry of CoFe₂O₄. The Curie temperature in the process of increasing temperature was slightly higher than that in the process of decreasing temperature. This can be understood by the fact that heating changed Co²⁺ ion redistribution in tetrahedral and in octahedral sites. The coercivity of the synthesized CoFe₂O₄ samples was lower than the theoretical values, which could be explained by the mono-domain structure and a transformation from ferrimagnetic to superparamagnetic state.     

Magnetic field synthesis of Fe3O4 nanoparticles used as a precursor of ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the nanoparticle surface are presented in this paper. In these methods, Fe₃O₄ nanoparticles were prepared by co-precipitation, and the aging of nanoparticles was improved by applied magnetic field. The obtained nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and vibrating sample magnetometer (VSM). Thereafter, to enhance the compatibility between nanoparticles and water, an effective surface modification method was developed by grafting acrylic acid onto the nanoparticle surface. FT-IR, XRD, transmission electron microscopy (TEM), and thermogravimetry (TG) were used to characterize the resultant sample. The testing results indicated that the polyacrylic acid chains have been covalently bonded to the surface of magnetic Fe₃O₄ nanoparticles. The effects of initiator dosage, monomer concentration, and reaction temperature on the characteristics of surface-modified Fe₃O₄ nanoparticles were investigated. Moreover, the Fe₃O₄-g-PAA hybrid nanoparticles were dispersed in water to form ferrofluids (FFs). The obtained FFs were characterized by UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the high-concentration FF had excellent stability, with high susceptibility and high saturation magnetization. The rheological properties of the FFs were also investigated using a rotating rheometer.     

Synthesis and luminescent properties of nanoparticles LaSrAl3O7:Eu, Tb

Phosphors of nanoparticles LaSrAl₃O₇:RE³⁺(REEu, Tb) have been prepared by a sol–gel method. The structure and luminescent properties of LaSrAl₃O₇:Eu³⁺ and LaSrAl₃O₇:Tb³⁺ phosphors were characterized by X-ray diffraction and atomic force microscopy (AFM), photoluminescence excitation and emission spectra were utilized. From X-ray diffraction (XRD) patterns, it is indicated that the phosphor LaSrAl₃O₇ forms without impurity phase at 900 °C. From atomic force microscopy (AFM) images, it is shown that the crystal size of the phosphores are about 60–80 nm. Upon excitation with UV irradiation, it is shown that there is a strong emission at around 617 nm corresponding to the forced electric dipole ⁵D₀–⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄–⁷F₅ transition of Tb³⁺. The dependence of photoluminescence intensity on Eu³⁺(or Tb³⁺) concentration and annealing temperature were also studied in detail.     

Yb and Yb-Eu luminescent properties of the Li2Lu5O4(BO3)3 phase

The luminescence of Yb³⁺ in the oxyborate Li₂Lu₅O₄(BO₃)₃ is reported. At low temperature, in addition to the usual ytterbium infrared emission, this phosphor presents an emission in the ultraviolet () which corresponds to the transition from the charge transfer state (O-Yb) to the 4f levels of Yb³⁺. The temperature quenching Tq50% is equal to 120 K. The infrared emission studied at room temperature is located between 950 and 1100 nm.Europium emission quenching in the Li₂Yb₅O₄(BO₃)₃ phase is related to Eu→Yb transfer by cross-relaxation. The reverse Yb→Eu transfer by cooperative sensitization is highlighted in the codoped Li₂Lu₅O₄(BO₃)₃ compound.     

Synthesis and optical characterization of Gd2O3:Eu nanocrystals: surface states and VUV excitation

This paper reports on the synthesis and characterization of Gd₂O₃:Eu³⁺ nanocrystals of different sizes. The particles have been synthesized by a sol-lyophilization process. This methods allows the synthesis of 7–100 nm diameter cubic-phase particles. The photoluminescence properties have been studied with different excitation from X-ray to VUV and visible wavelengths. Compared to the properties of the bulk materials, some important changes on the luminescence are observed. In particular some bands are strengthened when the size of the particles is diminished. We could therefore ascribe this bands to doping ions on a site close to the surface. Also a very low efficiency of excitation for small particles is observed when exciting with X-ray or high-energy VUV photons (i.e. when exciting the host matrix) compared to the efficiency obtained when exciting in the charge transfer band or in the doping ions related states.