Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Photoluminescence of SrGa2S4:Sn,Re(=Ce, Gd) phosphors

The photoluminescence (PL) spectra, PL excitation spectra, color coordinates, and X-ray diffraction spectra are reported for SrGa₂S₄:Sn,Re(=Ce and Gd, respectively) phosphors. By mixing SrGa₂S₄:Sn,Ce phosphors with different Ce³⁺ concentrations, white emissions can be obtained under the excitation of a 340-nm UV LED. Emissions in the green to yellow color range can be obtained from SrGa₂S₄:Sn,Gd phosphors. The rare earth ions enhance the green emission band, which peaks at 534 nm, instead of the yellow one. The origin of this enhancement is discussed. The resonant energy transfer rates are estimated in the cases from Ce³⁺ to the green and yellow centers of Sn²⁺ and between the yellow centers and the green centers.     

Green luminescent ZnO:Cu<Superscript>2+</Superscript> nanoparticles for their applications in white-light generation from UV LEDs

Copper doped ZnO nanoparticles were synthesized by a chemical technique based on a hydrothermal method. The crystallite sizes, estimated by XRD and TEM/SEM for different doping percentage of Cu²⁺ (1–10%), were found to be in the range of ~10–15 nm. TEM/SEM images showed formation of uniform nanorods, the aspect ratio of which varied with doping percentage. Photoluminescence (PL) measurement showed strong green visible emission and PL intensity was found enhanced with increase in doping percentage. The increase in the PL intensity was mainly due to Cu incorporation in ZnO lattice. Currently, light-emitting diodes (LEDs) giving ultraviolet emission have been combined with broad-band visible green phosphors to make white-light LEDs. Thus, green luminescent ZnO:Cu²⁺ nanoparticles are seen as necessary and condemnatory constituent for white-light generation from UV LEDs, underlying the importance of the current work.     

Ionic liquid-assisted hydrothermal synthesis of dendrite-like NaY(MoO4)2:Tb phosphor

Micro-sized NaY(MoO₄)₂:Tb³⁺ phosphors with dendritic morphology was synthesized by a ionic liquid-assisted hydrothermal process. X-ray diffraction (XRD) indicated that the as-prepared product is pure tetragonal phase of NaY(MoO₄)₂. Field emission scanning electron microscopy (FE-SEM) images showed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors have dendritic morphology. The photoluminescent (PL) spectra displayed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors show a stronger green emission with main emission wavelength 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, and the optimal Tb³⁺ doping concentration for obtaining maximum emission intensity was confirmed to be 10 mol%. Based on Van Uitert's and Dexter's models the electric dipole–dipole (D–D) interaction was confirmed to be responsible for the concentration quenching of ⁵D₄ fluorescence of Tb³⁺ in the NaY(MoO₄)₂:Tb³⁺ phosphors. The intrinsic radiative transition lifetime of ⁵D₄ level is found to be 0.703 ms.     

A white light emitting phosphor Sr1.5Ca0.5SiO4:Eu, Tb, Eu for LED-based near-UV chip: Preparation, characterization and luminescent mechanism

In this work, we report preparation, characterization and luminescent mechanism of a phosphor Sr_1.5Ca_0.5SiO₄:Eu³⁺,Tb³⁺,Eu²⁺ (SCS:ETE) for white-light emitting diode (W-LED)-based near-UV chip. Co-doped rare earth cations Eu³⁺, Tb³⁺ and Eu²⁺ as aggregated luminescent centers within the orthosilicate host in a controlled manner resulted in the white-light phosphors with tunable emission properties. Under the excitation of near-UV light (394 nm), the emission spectra of these phosphors exhibited three emission bands: one broad band in the blue area, a second band with sharp lines peaked in green (about 548 nm) and the third band in the orange-red region (588-720 nm). These bands originated from Eu²⁺ 5d→4f, Tb³⁺⁵D₄→⁷F_J and Eu³⁺⁵D₀→⁷F_J transitions, respectively, with comparable intensities, which in return resulted in white light emission. With anincrease of Tb³⁺ content, both broad Eu²⁺ emission and sharp Eu³⁺ emission increase. The former may be understood by the reduction mechanism due to the charge transfer process from Eu³⁺ to Tb³⁺, whereas the latter is attributed to the energy transfer process from Eu²⁺ to Tb³⁺. Tunable white-light emission resulted from the system of SCS:ETE as a result of the competition between these two processes when the Tb³⁺ concentration varies. It was found that the nominal composition Sr_1.5Ca_0.5SiO₄:1.0%Eu³⁺, 0.07%Tb³⁺ is the optimal composition for single-phased white-light phosphor. The CIE chromaticity calculation demonstrated its potential as white LED-based near-UV chip.     

Prepare high efficiency Mn-doped Zn2SiO4 green phosphors in air using nano-particles

In this study, nano-scale precursors of ZnO, SiO₂, and MnO₂ powders were used to prepare mixtures with the compositions of 2ZnO+SiO₂+X mol% MnO₂ (X=MnO₂/2ZnO, abbreviated as Zn₂SiO₄-X-MnO₂), where 2≤X≤5. The mixed Zn₂SiO₄-X-MnO₂ mixtures were calcined from 900 to 1300 °C in air in order to synthesize Zn₂SiO₄:Mn²⁺ green phosphors. The X-ray diffraction patterns of Zn₂SiO₄-X-MnO₂ particles indicated that ZnO was present in the 900 °C-calcined Zn₂SiO₄-X-MnO₂ phosphors, but not in particles calcined at temperatures of 1000 °C and higher. However, the unapparent secondary phase of ZnMnO₃ was found in the 1200 and 1300 °C-calcined Zn₂SiO₄-5-MnO₂ compositions. The luminescent characteristics of Zn₂SiO₄-X-Mn²⁺ phosphors were compared with that of a commercial product (Nichia Corp., Japan). The photoluminescence (PL) intensity of 1200 °C-calcined Zn₂SiO₄-4-MnO₂ phosphors was higher and the decay times of all synthesized Zn₂SiO₄-X-MnO₂ phosphors were longer than those of the commercial product.     

The improvement of moisture resistance and thermal stability of Ca3SiO4Cl2:Eu phosphor coated with SiO2

Green-emitting phosphors Ca₃SiO₄Cl₂:Eu²⁺ were prepared by the high temperature solid-state method. Sol-gel process was adopted to encapsulate the as-prepared phosphors with tetraethylorthosilicate (TEOS) as silicon coating reagent. Fluorescence spectrometer, scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) patterns were employed to characterize the emission spectra, the surface morphologies and the phase structures, respectively. The chemical stability testing was operated by the method of soaking the phosphors in deionized water and roasting them at different temperatures. The results indicated that the surfaces of the green phosphors were evenly coated by SiO₂ and the phase structure of the coated phosphors remained the same as the uncoated samples. The luminance centre of Eu²⁺ did not shift after surface treatment and the luminance intensity of coated phosphors was lower than that of the uncoated samples. The results demonstrated that the water-resistance stability of the coated phosphor was improved to some degree because the pH value and the luminance intensity variation were both smaller than the uncoated phosphor after steeping within the same time. Moreover, the thermal stability of coated phosphors was enhanced obviously compared to the original samples based on the temperature dependent emission spectra measurement.     

Synthesis and photoluminescence of Eu- or Tb-doped Mg2SiO4 nanoparticles prepared by a combined novel approach

Tb³⁺- or Eu³⁺-doped magnesium silicate phosphors were prepared for the first time by using a novel approach, combined sol-gel-microwave heating. X-ray diffraction (XRD), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and photoluminescence analyses were used to characterize the phosphors. XRD confirmed a forsterite lattice of Mg₂SiO₄ for the phosphors. TEM observation indicated that the phosphors have a spherical-like shape with little aggregation and the particle size is about 50 nm, and the small size is favorable to the potential application in field emission displays. The luminescent colors of Mg₂SiO₄:Tb³⁺ and Mg₂SiO₄:Eu³⁺ phosphors are green and red respectively, furthermore the luminescent intensities of them are relatively higher than the traditional Zn₂SiO₄:Tb³⁺ and Zn₂SiO₄:Eu³⁺ phosphors. In addition, Eu³⁺ ion emissions as a structural probe suggest that the rare earth ions replace the Mg²⁺ ions in the site of M2 (C_s) in the forsterite lattice of Mg₂SiO₄.     

Synthesis and cathodoluminescent properties of Y2SiO5:Tb3+ phosphors prepared from uniform precursor

The luminescent properties of phosphors are sensitive to the size of phosphor particles. The commercial Y₂SiO₅:Tb³⁺ phosphors usually show relatively larger particle size (5–10 μm) due to the irregular morphology of rare earth oxide precursor and thus degrade the luminescent properties. In this paper, we report the Y₂SiO₅:Tb³⁺ phosphors synthesized from the uniform Tb-doped Y₂O₃ precursor by a homogeneous precipitation method. Compared with the commercial phosphors, the obtained Y₂SiO₅:Tb³⁺ phosphors manifest the uniform morphology with much smaller particles distributing from 0.8 μm to 1.9 μm. Consequently, the cathodoluminescent intensity under low excitation voltage (1–5 kV) was increased, demonstrating a strong green emission with a dominant wavelength of 545 nm. Our results indicate an effective way to develop the high-quality phosphors for field emission display.     

Synthesis and photoluminescence properties of?novel red-emitting phosphors for light emitting diodes

The novel red-emitting phosphors K₂Ba_1−x (MoO₄)₂: xEu³⁺(0.02≤x≤0.15) phosphors were prepared by solid-state reaction and their crystal structures, photo luminescent characteristics were investigated. The results show that all samples can be efficiently excited by UV (396 nm) and blue (466 nm) light, which are coupled well with the characteristic emission from UVLED and blue LED, respectively. Their emission spectra show intense red emission at 616 nm with line spectra due to the ⁵D₀–⁷F₂ transition of Eu³⁺. The XRD and photoluminescence experimental results indicate that the K₂Ba(MoO₄)₂: Eu³⁺ phosphor crystallization optimum annealing temperature occurs at about 800°C. The optimum doping concentration of Eu³⁺ is 0.10 mol, and the critical transfer distance (Rc) among Eu³⁺ ions is calculated to be about 11.126 ?. The approach to charge compensation was used: Ba²⁺→Eu³⁺+X⁻ (X=F, Cl, Br), and the charge compensation influence on the luminescent intensity of phosphors is investigated.     

Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods

Mn²⁺-doped Zn₂SiO₄ phosphors had been prepared by hydrothermal method in stainless-steel autoclaves. Effects of synthesized methods, reaction temperature, ambience of heat treatment on the structure and the luminescence properties of this silicate were studied with X-ray diffraction apparatus (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM) and fluorescence spectrum. Results show that Zn₂SiO₄ nanocrystalline can be obtained by hydrothermal method at relatively low temperatures. The absorption pattern shows an absorption edge at about 380 nm originated from ZnO crystals and two absorption bands at about 215 and 260 nm. Mn²⁺-doped Zn₂SiO₄ has a luminescence band with the wavelength at about 522 nm under 255 nm excitation, and the luminescent intensity increases after being heat treated.     

Green,blue, red,near-infrared up-conversion luminescence of Yb<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript>/Tm<Superscript>3+</Superscript> co-doped YVO<Subscript>4</Subscript> nanoparticles

YVO₄:Yb³⁺,Er³⁺; YVO₄:Yb³⁺,Tm³⁺; and YVO₄:Yb³⁺,Er³⁺,Tm³⁺ were all synthesized via sol-gel method with a subsequent thermal treatment. Specifically, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ phosphors were prepared with different annealing temperatures to study the influence of temperature. The transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescent (PL) spectrofluorometer were used to investigate the morphology, crystal structure, and up-conversion luminescent properties of all samples. In summary, all samples were granular-like nanoparticles and well crystallized with the same tetragonal phase as YVO₄. Under the irradiation at 980 nm, YVO₄:Yb³⁺,Er³⁺ phosphors can generate green emission at 525 and 553 nm and red emission at 657 nm, while YVO₄:Yb³⁺,Tm³⁺ phosphors can generate blue emission at 476 nm, red emission at 648 nm, and near-infrared emission at 800 nm. Notably, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ samples can exhibit green emission, blue emission, red emission, and near-infrared emission at the same time, which might endow the as-prepared samples with potential applications in many fields, such as luminous paint, infrared detection, and biological label.     

Synthesis and optimum luminescence of monodispersed spheres for BaWO4-based green phosphors with doping of Tb

Monodispersed spheres for Tb³⁺-doped BaWO₄ (BWO:Tb) phosphors were prepared by a hydrothermal method. X-ray diffraction (XRD) and field-emission scanning electron microscopy were used to characterize the resulting samples. Emission and excitation spectra were studied using xenon excited spectroscopic experiments at room temperature. Because 12 at% BWO:Tb phosphor exhibits intensive green emission under 254 nm excitation in comparison with the commercial green fluorescent lamp phosphor (LaPO₄:Ce,Tb), it is considered to be a new promising green phosphor for fluorescent lamps application.     

The VUV‐VIS Spectroscopic Properties of Dy3+ Ion in Phosphors M5‐2XDyXNaX(PO4)3F (M=Ca,Sr, Ba) and Their Potential Applications in Mercury‐Free Lamps

The phosphors, fluorapatites M₅(PO₄)₃F (M=Ca, Sr, Ba) activated with Dy³⁺ ions, were prepared by a high‐temperature solid‐state reaction technique. The VUV‐UV excitation spectra and emission spectra under VUV/UV excitation were measured. The phosphors show broad and strong absorption near 172 nm and intensive emission with the chromaticity coordinates entering the white light region. Hence, the phosphors may be considered as suitable candidates for Hg‐free lamps.     

A revisit of photoluminescence property for vanadate oxides AVO3 (A:K, Rb and Cs) and M3V2O8 (M:Mg and Zn)

We revisited the vanadium oxide phosphors, AVO₃ (A:K, Rb, and Cs) and M₃V₂O₈ (A:Mg and Zn) for a revaluation of possibility of these compounds for lighting applications, and the internal quantum efficiency (η) and luminescent colour properties for AVO₃ (A:K, Rb, and Cs) and M₃V₂O₈ (A:Mg, and Zn) have been presented. The AVO₃ showed the broadband emission from 380 to 800 nm, and the η for the KVO₃, RbVO₃ and CsVO₃ were 4%, 79% and 87%, respectively. The CIE colour coordinates are located at white region on the chromaticity diagram. The M₃V₂O₈ (A:Mg and Zn) also exhibited a quite broadband emission between 410 and 900 nm, indicating yellow luminescent colour. The Zn₃V₂O₈ showed high η value, 52%, compared to that of the Mg₃V₂O₈ (η=6%). This enhancement of η in the Zn₃V₂O₈ could be due to the increasing exciton diffusion assisted by the hybridizations of Zn 3d and O 2p orbitals for the valence band, and Zn 4s and Ti 3d orbitals for the conduction band.     

Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法     

PL and CL degradation and characteristics of SrAl2O4: Eu,Dy phosphors

Strontium aluminate phosphors are ideal for luminescent infrastructure materials. Their brightness and persistent glow time are much higher than previously used sulphide phosphors. Strontium aluminates prepared by the sol–gel and combustion methods are compared with commercially available strontium aluminate. High luminescent efficient SrAl₂O₄:Eu²⁺,Dy³⁺ pulsed laser deposited (PLD) thin films were also produced using the commercially available powder. Photoluminescence (PL) degradation studies showed that the phosphor intensity decreased about 20% over a period of 2 weeks under ultraviolet (UV) irradiation. Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) showed that cathodoluminescence (CL) degradation is due to the formation of SrO due to electron stimulated surface reactions. The light output mechanism of the phosphor is also discussed in more detail.     

Luminescent properties and the morphology of SrMoO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> powders synthesized <Emphasis Type="Italic">via</Emphasis> combining sol-gel and solid-state route

SrMoO₄:Eu³⁺ red phosphors were prepared by combining sol-gel and solid-state route. Citric acid and ethylenediaminetetraacetic acid (EDTA), employed as the chelating agents, were added to the aqueous solutions of metal nitrates. X-ray diffraction (XRD) and photoluminescent spectra techniques (PL) were used to characterize the resultant powders. The results indicated the obtained SrMoO₄:Eu³⁺ phosphors were fine powders with a particle size of 50 nm. The effects of synthesizing conditions were also investigated and optimized, which included the synthesis temperature and the activator concentration on the luminescent intensity. Compared with SrMoO₄:Eu³⁺ phosphors prepared by Solid-state reaction SrMoO₄:Eu³⁺ phosphors prepared by combining sol-gel and solid-state route showed appropriate particle size and a higher emission intensity.     

Green and red photoluminescence from ZnAl2O4:Mn phosphors prepared by sol–gel method

Luminescence investigations of Mn-activated ZnAl₂O₄ phosphors prepared by using sol–gel method were described. The phosphor was characterized by X-ray diffraction (XRD) and electronic paramagnetic resonance (EPR). The EPR spectra of the samples suggested that Mn ions possessed homogeneous distribution in ZnAl₂O₄ phosphors. Photoluminescence studies of the prepared phosphors showed green and red emissions. The red emission became weaker, and vanished at last with sintering temperature increasing from 600 to 900 °C in reducing atmosphere, while the intensity of green emission peak increased. Furthermore, when the phosphor was sintered at 900 °C in air, the intensity of red and green emissions decreased, but the value of intensity ratio increased. It suggested that the green emission resulted from Mn²⁺ and the red emission resulted from Mn⁴⁺.