Photoluminescent properties of heteroleptic cyclometalated platinum(II) complexes bearing 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate as an ancillary ligand

A new series of heteroleptic cyclometalated platinum(II) complexes Pt-1a-f was synthesized, employing 2-arylpyridine (or 1-arylisoquinoline) (HC^∧N-1) and 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dione (HO^∧O-1) for cyclometalation and as ancillary ligands, respectively, and photoluminescent properties were investigated. Focusing on red-shifted phosphorescence, C^∧N ligands containing π-extended aromatics and electron-rich heterocycles were examined. All obtained complexes exhibited photoluminescence at ambient temperature, and the emission maxima ranged from green (λ_PL=518 nm) to far red (λ_PL=708 nm). The large Stokes shifts of more than 100 nm and sub-microsecond or microsecond emission lifetimes revealed that these complexes are phosphorescent emissive. The quantum yield of Pt-1 ranged from 0.02 to 0.59 at ambient temperature and decreased as the emission maximum was red-shifted. In comparison with the reference platinum(II) complexes, Pt-2 bearing an aliphatic ancillary ligand, such as 2,2,6,6-tetramethylheptane-3,5-dionate (O^∧O-2), the ligand O^∧O-1 did not significantly affect the photoluminescence emission maxima, indicating that the energy gap between the singlet ground state and the triplet level was predominantly dependent on the C^∧N ligand.     

Synthesis, structure and luminescence properties of zinc (II) complexes with terpyridine derivatives as ligands

Five zinc (II) complexes (1-5) with 4′-phenyl-2,2′:6′,2″-terpyridine (ptpy) derivatives as ligands have been synthesized and fully characterized. The para-position of phenyl in ptpy is substituted by the group (R), i.e. tert-butyl (t-Bu), hexyloxy (OHex), carbazole-9-yl (Cz), naphthalen-1-yl-phenyl-amine-N-yl (NPA) and diphenyl amine-N-yl (DPA), with different electron-donating ability. With increasing donor ability of the R, the emission color of the complexes in film was modulated from violet (392 nm) to reddish orange (604 nm). The photoexcited luminescence exhibits significant solvatochromism because the emission of the complexes involves the intra-ligand charge transfer (ILCT) excited state. The electrochemical investigations show that the complexes with stronger electro-donating substituent have lower oxidation potential and then higher HOMO level. The electroluminescence (EL) properties of these zinc (II) complexes were studied with the device structure of ITO/PEDOT/Zn (II) complex: PBD:PMMA/BCP/AlQ/LiF/Al. Complexes 3, 4 and 5 exhibit EL wavelength at 552, 600 and 609 nm with maximum current efficiency of 5.28, 2.83 and 2.00 cd/A, respectively.     

Synthesis and luminescent properties of two Schiff-base boron complexes

Schiff bases N,N′-o-phenylenebis (salicylideneimine) (H₂L¹), N,N′-p-phenylenebis (salicylideneimine) (H₂L²) and their corresponding boron complexes (BF₂)₂L¹, (BF₂)₂L² were synthesized, respectively. The two boron complexes have been characterized by ¹H NMR, mass spectrometry and elemental analysis, while the luminescent properties of them were investigated with UV-VIS spectroscopy and photoluminescence spectroscopy. Then the three-layer devices [ITO/NPB (60 nm)/(BF₂)₂L¹ (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device I) and [ITO/NPB (60 nm)/(BF₂)₂L² (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device II) were fabricated by vacuum deposition. These two devices both exhibited blue green emission at 500 nm, but showed different luminances and efficiencies.     

Photosensitized luminescence of thermostable polynuclear Eu(III) complexes

Tetranuclear europium(III) complexes, [Eu₄(μ-O)(L₁)₁₀] (L₁=2-hydroxy-4-octyloxybenzophenone,1) and [Eu₄(μ-O)(L₂)₁₀] (L₂=2-hydroxy-4-dodecyloxybenzophenone,2) were synthesized by the reaction of lanthanide nitrates with L₁ or L₂ in the presence of triethylamine in methanol. The photosensitized emission bands of the both Eu(III) complexes in THF-d₈ were observed around 579, 590, 615, 653, and 699 nm by the excitation of the ligands at 380 nm, whereas the emission from the mononuclear complex 3 containing ethanol molecules was almost quenched. The emission efficiencies were determined to be 3.1±0.1% for 1 and 3.9±0.1% for 2, respectively. The differential scanning calorimetry (DSC) measurements demonstrated that the decomposition points of 1 and 2 were 309 °C and 320 °C, respectively, indicating high thermostability of these complexes compared to the mononuclear Eu(III) complex 3 (250 °C). New strategy for designing stable rare earth compounds giving strong emission would be emphasized by introducing polynuclear complexes. Polynuclear complexes should open a wide range of molecular design for photosensitized luminescence and thermal stability.     

Photophysical characteristics of 4,4′-bis(N-carbazolyl)tolan derivatives and their application in organic light emitting diodes

4,4′-bis(N-carbazolyl)tolan (BCT) and 4,4′-bis[N-(3,6-di-t-butyl)carbazolyl]tolan (BCT-t-Bu) were synthesized as π-expanded analogs of 4,4′-bis(N-carbazolyl)biphenyl. Their photophysical characteristics both in solution and films were thoroughly investigated. Interestingly, the phosphorescence spectrum of BCT was significantly medium-dependent, and the emission maximum was red-shifted by 131 nm from 489 nm in solution at 77 K to 620 nm in a deposited film at 5 K, suggesting the presence of strong intermolecular interactions in the film. BCT and BCT-t-Bu were found to be useful as host materials for fluorescence-based organic light emitting diodes (OLEDs). However, their low triplet energy levels in films negated their potential to act as hosts in phosphorescence-based OLEDs.     

Synthesis, characterization and optical limiting effect of nickel complexes of multi-sulfur 1,2-dithiolene

Three nickel complexes with a new multi-sulfur 1,2-dithiolene ligand, (n-Bu₄N)[Ni(cddt)₂] 1, (Ph₄P)[Ni(cddt)₂] 2 and [Ni(cddt)₂] 3 (cddt=4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3-dithiolate), have been synthesized and characterized by electrochemical measurements, IR, EPR and UV-Vis-NIR spectroscopies. The crystal structure of complex 2 is determined. Their optical nonlinearities are measured by the Z-scan technique with an 8 ns pulsed laser at 532 nm and all exhibit NLO absorptive abilities. Complexes 1 and 2 both exhibit effective self-defocusing performance (n₂=−5.81×10⁻¹⁰ esu for 1 and −4.51×10⁻¹⁰ esu for 2). The optical limiting (OL) effects were observed with nanosecond and picosecond laser pulses. The OL capability of complex 3 is superior to C₆₀ at the same experimental condition in ns measurements.     

Sensitized luminescence of Eu and Tb macrocyclic complexes bearing benzophenone antennae

Sensitized luminescence behavior of lanthanide (Ln=Eu³⁺, Tb³⁺) macrocyclic cyclen (1,4,7,10-tetraazacyclododecane) complexes bearing one or four benzophenone (BP) moieties as antenna (LnL1 and LnL4) has been studied in water. Despite higher molar extinction coefficient of EuL4 owing to four antennae, it shows only one-thirtieth the luminescence intensity of EuL1. Energy level of triplet excited-state of BP antenna (E_T) is only a few kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺, thus promoting a back energy transfer (BET) from ⁵D₂ of Eu³⁺ to ground-state BP antennae. On EuL4 bearing four antennae, BET occurs more rapidly than that on EuL1, thus exhibiting much weaker luminescence. For Tb complexes, the energy gap between E_T of BP antenna and ⁵D₄ excited state of Tb³⁺ is large enough (>13 kJ mol⁻¹), such that practically no BET occurs. The luminescence intensity of TbL4 is, however, lower (two-third) than that of TbL1. Time-resolved luminescence measurement reveals that hydration number of Tb³⁺ within TbL4 is twice that within TbL1. This is because the structural distortion of ligands on TbL4, caused by an intramolecular dipole-dipole interaction among the BP antennae, allows coordination of higher number of H₂O molecules to Tb³⁺, thus leading to a strong Tb luminescence quenching via O-H oscillators.     

Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

Eu(III) and Tb(III) luminescent lanthanide systems derived from DTPA-bisamide and DTTA-based ligands incorporating bipyridine antenna

Four new polycarboxylate ligands H₃Lⁿ have been synthesized by the attachment of two or one 2,2′-bipyridine subunits onto a diethylenetriamine pentacarboxylic acid (DTPA-bisamide derivatives: H₃L¹, H₃L²) or a diethylenetriamine tricarboxylic acid (DTTA derivatives: H₃L³, H₃L⁴) core. The neutral Eu^III and Tb^III complexes of these chelates have been prepared and studied from their UV-vis and luminescence data. The main photophysical characteristics of these complexes, i.e. the absorption and luminescence spectra, the metal-centred lifetimes and the overall luminescence yields (Φ) were measured in buffered aqueous solutions. In addition the role played by non-radiative paths (vibrational energy transfer involving coordinated water molecules, involvement of ligand-to-metal charge-transfer excited states, or metal→ligand back-transfer) was investigated. In all complexes, we found that the bidentate bipyridine chromophore is not coordinated to the lanthanide ion, allowing one (LnL¹, LnL²) or two (LnL³, LnL⁴) water molecules to penetrate the first coordination sphere of the metal. Although the bipyridine chromophore behaves as remote (from the binding site) light-harvesting unit for the lanthanide ion in these systems, a sizeable sensitization of the Eu- and Tb-centred luminescence can be effective (LnL², LnL³, Φ=16-19% in aerated D₂O solutions). Our photophysical investigations show that overall non-radiative deactivation is not dependant of thermally activated non-radiative channels but the efficiency of the ligand→Ln intramolecular energy transfer has to be taken into account to explain the obtained results.     

The crystal structure and magnetic properties of the 1-dimensional dihalide-bridged polymers dichlorobis(thiazole)cobalt(II) and dibromobis(thiazole)-cobalt(II)

The isostructural polymeric compounds Co(thiazole)₂X₂ (X=Cl (1), Br(2)) have been synthesised by the addition of thiazole to an ethanolic solution of the corresponding anhydrous cobalt halide. Powder X-ray and neutron diffraction measurements were used for structural determination. The structures were determined using powder neutron diffraction data and Rietveld techniques: (1) C2/c, a=17.806(2) Å, b=3.6806(6) Å, c=14.807(3) Å, β=94.78(1)°, V=967.1(3) ų, Z=4; (2) C2/c, a=18.079(3) Å, b=3.8138(8) Å, c=15.022(4) Å, β=92.71(1)°, V=1034.6(4) ų, Z=4. Each linear polymer chain is composed of pseudo-octahedral, high-spin Co²⁺ centres, doubly linked by halide bridges. Magnetisation measurements of 1 and 2 at 5 K between 0 and 10 kG reveals a metamagnetic transition between antiferromagnetic and ferromagnetic states. Low temperature susceptibility data have been fitted to a one-dimensional Ising model with a mean field correction and were found to be anisotropic with ferromagnetic intrachain interactions along the b-axis and weaker antiferromagnetic interchain interactions.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

Spectroscopic and thermodynamic features of conical bubble luminescence

The influence on luminescence from conical bubble collapse (CBL) with varying Ar gas content while perturbing the liquid 1,2-Propanediol (PD) has been investigated. The temporal, spatial, and spectral features were analysed with regards to the dynamics of collapse and liquid degradation. Sulphuric acid and sodium chloride were added to disturb the liquid. The following three cases were studied: PD/Ar, (I), (PD + H₂SO₄)/Ar, (II), and (PD + H₂SO₄ + NaCl)/Ar, (III). The intensities of those cases decrease as III > II > I. Temporally, single and multiple light emissions were found to occur. The pulse shape exhibited a large variety of profiles with a main maximum and up to two local maxima around the main maximum. These local maxima resembled those generated by laser cavitation. Spatially, no radial symmetry was detected in the light emissions. Spectrally, the Swan, CH and CN lines were observed at low volumes of gas and driving pressure. The OH radical and OH-Ar bands, as well as the Na and K lines, consistently appeared superimposed on an underlying continuum that almost disappeared in (III). The Na line was observed with two satellite diffuse bands representing Na-Ar complexes in (I) and (II), whereas in (III), only the line of sodium could be seen. Weak and diffuse emission lines from the Ar atom in the near-IR region were observed in (I) and (II).The proposed mechanism of bright CBL was based on the energy transfer from electron-excited homolytic cleavage products to the chromophore molecules generated during the collapse-rebound time line (∼8200 K and ∼1 ms of collapse time from model), which had accumulated inside the liquid and remained on the walls of cavity during the repetition of the collapse. A general mechanism for the bright CBL is broached.     

Correlation between adsorption and thermal properties of lanthanide(III) dinicotinates

Structural and thermal properties of the two isostructural lanthanide metal-organic frameworks: [Er₂(pdc)₃(dmf)₂]·dmf (1) and [Tm₂(pdc)₃(dmf)₂]·dmf (2) where pdc = C₅H₃N(COO)₂²⁻ and dmf = N,N′-dimethylformamide, have been investigated. They are characterized by the BET surface area of 302 and 101 m²/g for 1 and 2, respectively. This paper deals with the influence of activation conditions on sorption properties of the investigated complexes. Thermal investigations of as-made and activated complexes point to their entirely different thermal decompositions.     

Optical oxygen sensing materials based on trinuclear starburst ruthenium(II) complexes assembled in mesoporous silica

The preparation and oxygen sensing properties of optical materials based on two trinuclear starburst ruthenium(II) complexes: [Ru₃(bpy)₆(TMMB)]⁶⁺ (1) and [Ru₃(phen)₆(TMMB)]⁶⁺ (2) (bpy=2,2′-bpyridine, phen=1,10-phenathroline, TMMB=1,3,5-tris[2-(2′-pyridyl)benzimidazoyl]methylbenzene) assembled in two mesoporous silicate (MS) are described in this paper. The luminescence of Ru complexes/silicate assemble materials can be quenched by molecular oxygen with good sensitivity (I₀/I₁>5 for 2/MS and I₀/I₁>3 for 1/MS), indicating that trinuclear starburst Ru(II) complexes/MS systems are sensitive to oxygen molecules.     

Effect of C and SiC additions into in situ or mechanically alloyed MgB2 deformed in Ti sheath

Effect of 3.4 wt.% C and 5 wt.% SiC doping into the standard in situ (IN) process and mechanically alloyed (MA) MgB₂ was studied. Powders of IN and MA process were carried out in air and in argon filled glove box, respectively. Wire samples were prepared by two-axial rolling deformation of IN and MA powders inside the Ti tube. Titanium as sheath material allows to use higher sintering temperatures, we used 700 °C and 800 °C for 30 min in Argon. Critical current densities (J_c) were measured at variable temperatures 4.2 K, 10 K, 15 K and 20 K in the external magnetic fields ranging to 15 T. Critical temperatures, upper critical fields and irreversibility fields of IN and MA with SiC and C additions are compared and discussed. The highest transport properties were observed for wires with MA SiC doped MgB₂ in the whole scale of temperatures 4.2–20 K. Upper critical field was rapidly enhanced in the case of carbon doped MA samples at 4.2 K. MA samples have shown decreased J_c values for higher temperatures (15 K, 20 K), in some case even worse than for the not doped reference IN sample. Carbon substitution and grain connectivity of analyzed samples are compared and discussed. Presented results show that for 20 K applications some new ways (additions) have to be found for increasing the J_c substantially.     

Nature of electric and magnetic dipoles gleaned from the Poynting theorem and the Lorentz force law of classical electrodynamics

Starting with the most general form of Maxwell's macroscopic equations in which the free charge and free current densities, ρ_free and J_free, as well as the densities of polarization and magnetization, P and M, are arbitrary functions of space and time, we compare and contrast two versions of the Poynting vector, namely, S = μ_o^− 1E × B and S = E × H. Here E is the electric field, H is the magnetic field, B is the magnetic induction, and μ_o is the permeability of free space. We argue that the identification of one or the other of these Poynting vectors with the rate of flow of electromagnetic energy is intimately tied to the nature of magnetic dipoles and the way in which these dipoles exchange energy with the electromagnetic field. In addition, the manifest nature of both electric and magnetic dipoles in their interactions with the electromagnetic field has consequences for the Lorentz law of force. If the conventional identification of magnetic dipoles with Amperian current loops is extended beyond Maxwell's macroscopic equations to the domain where energy, force, torque, momentum, and angular momentum are active participants, it will be shown that “hidden energy” and “hidden momentum” become inescapable consequences of such identification with Amperian current loops. Hidden energy and hidden momentum can be avoided, however, if we adopt S = E × H as the true Poynting vector, and also accept a generalized version of the Lorentz force law. We conclude that the identification of magnetic dipoles with Amperian current loops, while certainly acceptable within the confines of Maxwell's macroscopic equations, is inadequate and leads to complications when considering energy, force, torque, momentum, and angular momentum in electromagnetic systems that involve the interaction of fields and matter.     

Intermolecular photoinduced electron-transfer processes between C60 and aniline derivatives in benzonitrile

The quenching behavior of the triplets of C₆₀ by various aniline derivatives (1a-d and 2a-e) was investigated by means of laser flash photolysis in benzonitrile at 293 K. Electron transfer process was proposed to be the main mechanism because of the direct detection of radical ions of aniline derivatives and C₆₀ in time-resolved transient absorption spectra. The quenching rate constants (k_q) of by different substrates determined at 740 nm approach or reach the diffusion-controlled limit. DFT method was employed to calculate the unknown oxidation potentials of substrates in solution. With these E_ox values, free energy changes (ΔG) were obtained through Rehm-Weller equation. Dependence of observed quenching rate constants on the free energy changes further indicates the photoinduced reactions between ³C₆₀^* and substrates proceed through an electron transfer mechanism. Obtained k_q values for the aniline derivatives are impacted obviously by ground-state configurations and the kinds substituents quantified by Hammett σ constant. Good correlation between log k_q and σ values conforms to the empirical Hammett equation. A more negative ρ value (−3.356) was gained for anilines (2a-e) than that of N,N-dimethylanilines (1a-d) (−1.382), which suggests a more susceptible reactivity for the former substrates. Charge density distribution of reaction center “N” originated from quantum calculation supports this suggestion. In addition, a relationship between quenching rate constants and solvent viscosity was gained from C₆₀/dimethyl-p-toluidine system in altered mixtures of acetonitrile and toluene.     

Sensitized luminescence properties of dinuclear lanthanide macrocyclic complexes bearing a benzophenone antenna

Dinuclear lanthanide (Ln=Tb³⁺ or Eu³⁺) complexes (Ln₂L2) of two octadentate macrocyclic polyaminopolycarboxylic ligands connected through a benzophenone (BP) moiety (L2) have been synthesized. Sensitized luminescence properties of Ln₂L2 in water have been studied in comparison to those of BP-conjugated mononuclear Ln complexes (LnL1). The luminescence intensity of Tb₂L2 is lower than that of TbL1 because of lower triplet quantum yield of the BP moiety. In contrast, Eu₂L2 shows higher intensity than EuL1. For both Eu complexes, energy level of triplet excited-state BP (³BP*) is only 3 kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺. The ⁵D₂ state formed by a triplet-energy transfer (TET) from ³BP* is therefore deactivated by a back energy transfer (BET) to the ground-state BP, resulting in low luminescence intensity of EuL1. In contrast, within Eu₂L2, TET from ³BP* to ⁵D₀ state of two Eu³⁺ ions is accelerated, thus leading to higher luminescence intensity. Another notable feature of Eu₂L2 is the luminescence quantum yield independent of its concentration. In contrast, for EuL1 system, an intermolecular BET occurs from ⁵D₂ state of Eu³⁺ to the ground-state BP conjugated to another EuL1 complex, resulting in a yield decrease with the concentration increase.     

Prepare high efficiency Mn-doped Zn2SiO4 green phosphors in air using nano-particles

In this study, nano-scale precursors of ZnO, SiO₂, and MnO₂ powders were used to prepare mixtures with the compositions of 2ZnO+SiO₂+X mol% MnO₂ (X=MnO₂/2ZnO, abbreviated as Zn₂SiO₄-X-MnO₂), where 2≤X≤5. The mixed Zn₂SiO₄-X-MnO₂ mixtures were calcined from 900 to 1300 °C in air in order to synthesize Zn₂SiO₄:Mn²⁺ green phosphors. The X-ray diffraction patterns of Zn₂SiO₄-X-MnO₂ particles indicated that ZnO was present in the 900 °C-calcined Zn₂SiO₄-X-MnO₂ phosphors, but not in particles calcined at temperatures of 1000 °C and higher. However, the unapparent secondary phase of ZnMnO₃ was found in the 1200 and 1300 °C-calcined Zn₂SiO₄-5-MnO₂ compositions. The luminescent characteristics of Zn₂SiO₄-X-Mn²⁺ phosphors were compared with that of a commercial product (Nichia Corp., Japan). The photoluminescence (PL) intensity of 1200 °C-calcined Zn₂SiO₄-4-MnO₂ phosphors was higher and the decay times of all synthesized Zn₂SiO₄-X-MnO₂ phosphors were longer than those of the commercial product.